Professional Documents
Culture Documents
Huawei eLTE3.3 DBS3900 Product Description PDF
Huawei eLTE3.3 DBS3900 Product Description PDF
Huawei eLTE3.3 DBS3900 Product Description PDF
3 DBS3900
Product Description
Issue Draft A
Date 2014-09-22
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Email: support@huawei.com
Change History
Date Version CR ID Modified Description Prepared By
Chapter
2014-05 AFI 3.0 X2 version
2014-08 Pre-IUS 3.0 X4 version
Contents
2 Product Structure...................................................................................................................... 3
2.1 Overview .............................................................................................................................................................. 3
2.2 Basic Module ........................................................................................................................................................ 3
2.2.1 eBBU ................................................................................................................................................................. 3
2.2.2 eRRU ................................................................................................................................................................. 8
Distributed Architecture
In the distributed architecture, the BBU and RRU of an DBS3900 are separately deployed and
connected through fibers. This minimizes feeder loss and improves eNodeB coverage. The
distributed BBU+RRU architecture allows RRUs to be mounted on walls or to poles, enabling
zero footprint site deployment. As a result, network deployment costs can be reduced by more
than 30% and network deployment efficiency is significantly improved.
Excellent Performance
Maximum bit rates per TDD cell are up to100 Mbit/s downlink and 50 Mbit/s uplink over 20
MHz wide channels. The excellent performance can help customers preempt the commanding
elevations of the professional mobile broadband industry and get rapid service expansion.
Flexible Networking
The DBS3900 supports varied frequency bands, enabling customers to provide services over
both readily and newly available frequency bands. Customers can utilize more than two
frequency bands on one wireless network based on the availability of frequency resources in
different areas.
Anti-network Paralysis
The DBS3900 supports "Fallback mode". When the Core Network Device is down, the eBBU
starts the CNPU which works as a Core Network; it will ensure that all the services under the
eNodeB work normal.
2 Product Structure
2.1 Overview
The DBS3900 features a distributed architecture and is comprised of two types of basic
modules: eBBU (enterprise Baseband control unit) and eRRU (enterprise remote radio unit).
The eBBU and eRRU transmit CPRI signals via fiber optic cables that connect them through
common public radio interface (CPRI) ports. This kind of architecture satisfies the
requirements of setting up enterprise wireless communication networks.
"Fallback mode" means that when the Core Network Device is down, the eBBU starts the CNPU which
works as a Core Network, it will ensure that all the services under the eNodeB work normal. CNPU is an
optional board.
(Slot18)
Slot1 Slot5
FAN
Slot2 Slot6
POWER1
Slot3 (Slot19)
Slot7
CNPU
4. eBBU configuration
Table 2-2 shows the eBBU configuration:
2.2.2 eRRU
One or more eRRU constitute the radio frequency (RF) part of a distributed base station.
eRRUs can be installed on a pole, wall, or stand. They can also be installed close to antennas
to shorten the feeder length, reduce feeder loss, and improve system coverage. eRRUs serve
to modulate and demodulate baseband signals and RF signals, process data, amplify power
and detect standing waves.
To meet the needs of different application scenarios, the solution provides a variety of eRRU,
including:
eRRU3232: 1.8 GHz (1785 MHz to 1805 MHz), 4 paths, is mainly applied to outdoor
macro base stations;
eRRU3253: 1.4 GHz (1447 MHz to 1467 MHz), 8 paths, is mainly applied to
government networks;
eRRU3255: 400 MHz (380 MHz to 400 MHz), 2 paths, mainly applied to outdoor
scenario, also can be applied in indoor scenario;
eRRU3251: 1.8 GHz (1785 MHz to 1805 MHz), 2 paths, mainly applied to indoor
coverage and linear coverage situations, such as railway, subway, mine;
eRRU3222: 800 MHz (Download 791 MHz to 821 MHz, Upload 832 MHz to 862 MHz),
2 paths, mainly applied to 800 MHz outdoor macro base stations;
eRRU3252: 2.3 GHz (2300 MHz to 2400 MHz), 4 paths
eRRU3232: 3.5 GHz (3605 MHz to 3685 MHz, 3480 MHz to 3500 MHz, 3580 to 3600
MHz), 4 paths, mainly applied to 3.5 GHz outdoor macro base stations. Supports only
the DC mode and Huawei logo.
Customers can choose to apply different eRRUs according to the frequency band available to
them.
1. eRRU Exterior
Figure 2-4 shows the eRRU3232 exterior. Figure 2-5 shows the eRRU3253 exterior. Figure
2-6 shows the eRRU3255 exterior. Figure 2-7 shows the eRRU3251 exterior.
2. Ports on an eRRU
An eRRU has a modular structure. Its external ports are located in the cabling cavity at
the bottom of the module. Table 2-3 and Table 2-4 describe the ports on eRRU3232.
Table 2-5 describes the ports on eRRU3253. Table 2-6describes the ports on eRRU3255.
Table 2-7 describes the ports on eRRU3251. Table 2-8describes the ports on eRRU3222.
Table 2-9 describes the ports on eRRU3252.
3 Installation Scenarios
Typical installation scenarios for the DBS3900 are classified into outdoor and indoor
installation scenarios, as shown in Figure 3-1and Figure 3-2.
If the DBS3900 is deployed indoors, the BBU can be installed in a 19-inch cabinet or rack, in
an Indoor Mini Box (IMB03). The eBBU is able to use the power supply system and
transmission system of the existing network.
4 Typical Configurations
Table 4-3 Typical configurations of the DBS3900 1.8G 4T4R frequency band
Table 4-4 Typical configurations of the DBS3900 1.8G 8T8R frequency band
Table 4-5 Typical configurations of the DBS3900 800M 2T2R frequency band
Table 4-6 Typical configurations of the DBS3900 2.3G 4T4R frequency band
Table 4-7 Typical configurations of the DBS3900 3.5G 4T4R frequency band
5.1 Overview
The DBS3900 supports the O&M system that is based on the man-machine language (MML)
and the graphic user interface (GUI). The O&M system enables a hardware-independent
O&M mechanism and provides powerful O&M functions for users to meet various O&M
requirements.
5.2 Characteristics
Robust Hardware Management, Rapid Fault Location and Rectification
DBS3900 hardware management provides pre-warning mechanism and resetting mechanism
to make sure sufficient time are left for troubleshooting before service interruptions. Recovery
can be implemented by resetting to avoid severe accidents in case faults cannot be cleared in
time. When a hardware fault occurs, the DBS3900 alerts the user by generating alarms and
flashing indicators and provides suggestions to guide the user in troubleshooting. After the
fault is recovered, the alarm is cleared.
6 Technical Specifications
Whole system
Maximum Cell LBBPd:
Number 12Cells(8T8R 20 MHz/8
T8R10 MHz/4T4R 20 MHz/
4T4R 5 MHz/4T4R 10
MHz/2T2R 5 MHz/2T2R 10
MHz/2T2R 20 MHz)
Maximum Downlink: 450 Mbit/s
Throughput per Uplink: 300 Mbit/s
eNodeB
Maximum Number 3600
of UEs in
RRC-connected
Mode per eNodeB
eRRU maximum LBBPd: 38 km When cascaded to three levels with
distance 10M/20M, the maximum distance
between two consecutive eRRU
cannot exceed 17 km.
eRRU cascading LBBPc: 3 levels to the max 5M 2T2R 6-level cascading
LBBPd: 6 levels to the max 10M 2T2R 4-level cascading
20M 2T2R 2-level cascading
Only eRRU3251 supports cascading
Networking Star type/Chain type/Load
sharing
LBBPd specification
Max cell number 3 20M 4T4R/2T2R/1T1R
of per LBBPd 10M 4T4R/2T2R/1T1R
5M 4T4R/2T2R/1T1R
3M 4T4R/2T2R/1T1R
Back-to-back eRRU number of per cell 2
combination
between eRRU Max supported combined 3 x 5M 2T2R
cell number of per LBBPd 3 x 10M 2T2R
3 x 20M 2T2R
Back-to-back eRRU number of per cell 1
combination in
eRRU Max supported combined 3 x 5M 2T2R
cell number of per LBBPd 3 x 10M 2T2R
3 x 20M 2T2R
Indoor eRRU number of per cell 6
combination
between eRRU Max supported combined 3 x 5M 1T1R
cell number of per LBBPd 3 x 10M 1T1R
3 x 20M 1T1R
3 x 5M 2T2R
3 x 10M 2T2R
3 x 20M 2T2R
Indoor eRRU number of per cell 1
combination in
eRRU Max supported combined 3 x 5M 1T1R
cell number of per LBBPd 3 x 10M 1T1R
3 x 20M 1T1R
3 x 5M 2T2R
3 x 10M 2T2R
3 x 20M 2T2R
Combination between eRRUs means that multiple eRRUs merge into one cell which apply only
5M/10M/20M system bandwidth, and only supports 2T2R of eRRU.
Combination in eRRU means that several paths of an eRRU merge into one cell, namely the antennas of
an eRRU split into multiple 2-path and then merge into the same cell.
Item Specification
Dimensions (H x W x D) 86 mm x 442 mm x 310 mm
Weight ≤ 12 kg (In full configuration)
Input Power -48 V DC (-38.4 V DC to -57 V DC)
Temperature 20ºC to +55ºC
Relative Humidity 5% RH to 95% RH
Atmospheric Pressure 70 kPa to 106 kPa
Power consumption A baseband unit (eBBU3900) includes:
One fan module (FANc) and one power module (UPEUc):
53.5 W
LMPT system control board: 40 W
CNPU fallback board: 40 W
LBBPc baseband board: 83 W
LBBPd baseband board: 90 W
USCUb clock board: 4 W (8HP USCUb22)
PEUc module: 23 W
Ingress Protection Rating IP20
CPRI Port 6 CPRI ports per LBBP
Standard CPRI4.1 port, compatible with CPRI3.0
CPRI port supports: automatic switching between 2.4576
Gbit/s and4.9152 Gbit/s
Transmission Port 2 FE/GE electrical port
Or 2 FE/GE optical port
Or 1 FE/GE electrical port and 1 FE/GE optical port
Cell Max cell number:12
Cell frequency bandwidth:3 MHz/5 MHz/10 MHz/20 MHz
(only eRRU3255 supports 3 MHz)
Clock synchronization GPS
Cooling Forced air cooling (Left in, right out)
Item Specification
Frequency Band and Frequency Band Bandwidth
Bandwidth
1.8 GHz: 5 MHz/10 MHz/20
1785 MHz to 1805 MHz MHz
1785 MHz to 1800 MHz
Dimensions (H x W x D) 480 mm x 270 mm x 140 mm
Weight 18.5 kg
Input Power -48 V DC, voltage range: -36 V DC to -57 V DC
220 V AC, voltage range: 90 V AC to 290 V AC
Maximum output Power 4 x 20 W
Power consumption Typical average power consumption: 350 W
Typical max power consumption: 465 W
Receiving sensitivity -103.5dBm
Temperature -40ºC to +50ºC
Relative Humidity 5% RH to 100% RH
Atmospheric Pressure 70 kPa to 106 kPa
Ingress Protection Rating IP65
Item Specification
Frequency Band and Frequency Band Bandwidth
Bandwidth
1.4 GHz: 10 MHz/20 MHz
1447 MHz to 1467 MHz
Dimensions (H x W x D) 550 mm x 320 mm x 135 mm
Weight 24 kg
Input Power -48 V DC, voltage range: -32 V DC to -60 V DC
Maximum Output Power 8 x 8 W @ 2:2 (time slot ratio)
8 x 6 W @ 1:3
Item Specification
Temperature -40ºC to +45ºC @ 2: 2+8 W/Path or 1: 3+6 W/Path
-40ºC to +50ºC @ 2: 2+6 W/Path or 1: 3+5 W/Path
Relative Humidity 5% RH to 100% RH
Atmospheric Pressure 70 kPa to 106 kPa
Ingress Protection Rating IP65
Item Specification
Frequency Band and Frequency Band Bandwidth
Bandwidth
400 MHz: 3 MHz/5 MHz/10
380 MHz to 400 MHz MHz/20 MHz
Item Specification
Frequency Band and Frequency Band Bandwidth
Bandwidth
1800 MHz: 5 MHz/10 MHz/20
1785 MHz to 1805 MHz MHz
Item Specification
Input Power -48 V DC, voltage range: -36 V DC to -60 V DC
Maximum Output Power 2 x 20 W
Power consumption Typical average power consumption: 190 W
Typical max power consumption: 250 W
Receiving sensitivity -102dBm
Temperature -40ºC to +50ºC
Relative Humidity 5% RH to 100% RH
Atmospheric Pressure 70 kPa to 106 kPa
Ingress Protection Rating IP65
Item Specification
Frequency Band and Frequency Band Bandwidth
Bandwidth
800 MHz: 5 MHz/10 MHz/20
Download 791 MHz to 821 MHz MHz
Upload 832 MHz to 862 MHz
Dimensions (H x W x D) 480 mm x 270 mm x 140 mm (18L, without shell)
485 mm x 300 mm x 170 mm (25L, with shell)
Weight ≤ 17.5 kg (without shell)
≤ 20 kg (with shell)
Input Power -48 V DC, voltage range: -57 V DC to -36 V DC
Maximum Output Power 2 x 40 W
Power consumption 300 W
Receiving sensitivity 1T1R: -106.4dBm
1T2R: -109.2 dBm
Temperature -40ºC to +50ºC (1120 W/m²solar radiation)
-40ºC to +55ºC (without solar radiation)
Relative Humidity 5% RH to 100% RH
Atmospheric Pressure 70 kPa to 106 kPa
Ingress Protection Rating IP65
Item Specification
Input Power -48 V DC, voltage range: -32 V DC to -60 V DC
Dimensions (H x W x D) 480 mm x 270 mm x 140 mm (18L, without shell)
Weight ≤ 19.5 kg (without shell)
Maximum output Power 4 x 20 W
Frequency Band 2300 to 2400 MHz
Power consumption Typical average power consumption: 310 W
Typical max power consumption: 330 W
Temperature -40ºC to +50ºC (without solar radiation)
Relative Humidity 5% RH to 100% RH
Atmospheric Pressure 70 kPa to 106 kPa
Shake Proof Protection NEBS GR63 zone4
Ingress Protection Rating IP65
Item Specification
Frequency Band and Frequency Band Bandwidth
Bandwidth
3.5 GHz: 5 MHz/10 MHz/20
3605-3685 MHz MHz
3480-3500 MHz
3580-3600 MHz
Dimensions (H x W x D) 480 mm x 270 mm x 140 mm
Weight 18.5 kg
Input Power -48 V DC, voltage range: -36 V DC to -57 V DC
Maximum output Power 4 x 10 W
Power consumption Typical average power consumption: 350 W
Typical max power consumption: 465 W
Receiving sensitivity -103.5dBm
Temperature -40ºC to +50ºC
Relative Humidity 5% RH to 100% RH
Atmospheric Pressure 70 kPa to 106 kPa
Ingress Protection Rating IP65
Item Specification
System Availability ≥ 99.999%
Mean Time Between Failures ≥ 155,000 hours
Mean Time to Repair ≤ 1 hour
System Restarting Time < 450s
Item Standard
Storage ETSI EN300019-1-1 V2.1.4 (2003-04) class1.2 "Weather
protected, not temperature-controlled storage locations"
Transportation ETSI EN300019-1-2 V2.1.4 (2003-04) class 2.3 "Public
transportation"
Anti-seismic Interim Provisions for Test of Anti-seismic Performances of
Performance Telecommunications Equipment (Telecommunication Industry
Standard of the People's Republic of China)
Electromagnetic The eNodeB meets the Electromagnetic Compatibility (EMC)
Compatibility (EMC) requirements and complies with the following standards:
R&TTE Directive 1999/5/EC
R&TTE Directive 89/336/EEC
3GPP TS 36.113
ETSI EN 301489-1/23
ETSI EN 301908-1 V2.2.1 (2003-10)
ITU-R SM.329-10
CTA
CE
RoHS
7 Abbreviations Reference