Professional Documents
Culture Documents
CPV Process Valve Actuator
CPV Process Valve Actuator
CPV Process Valve Actuator
Series CPV
Process Valve Actuator
Typical Applications:
• Gate Valves
• Knifegate Valves
• Pinch Valves
• Penstocks
• 1/4 Turn Ball Valves
• 1/4 Turn Butterfly Valves
CAT: CPV-1
Page 1
CPV Series
Pneumatic Cylinder
Application
This series of pneumatic cylinders are specifically designed for low duty
Features
• Rugged construction.
• Double acting.
• Designed for simplicity and reliability.
• Materials selected for ease of maintenance and maximum life.
• Mounting options to suit most requirements.
• Custom mounting available on request.
• Threaded rod end.
• End covers machined from 250 grade steel.
• Glass fibre reinforced epoxy resin barrel.
• 316 Stainless Steel piston rod standard.
• Replaceable seals.
• Self-lubricating replaceable bearings and wear rings.
• Black enamel painted external surface.
Specifications
Nominal Bore 80 100 125 160 200 250 300 350 400 450 500
Stroke Range 0 - 850mm max
Fluid Compressed Air
Filtration Requirement 10 Micron
Lubrication Required No Yes
Working Pressure 200~700kPa
Working Temperature 5~60˚ C
Piston Speed (max.) 300mm/s
Cushioning Not available
Stroke Tolerance ±3mm
Position Sensing
Auto Switch Inductive Sensor
(Optional)
Page 2
Series CPV
80 to 300 Bore (Non-Lube Type)
1 2 3 4 5 6 7 8 9 10
14 15 16
C PV 80 SP
F (Standard)
C*PVBN350~500 - * M
Notes:
1 KA = Cross flat dimension of the spanner flat.
2 AL = Effective length of the male thread.
BL = Effective length of the female thread.
3 All ports are BSPT (Class: R system B).
4 Tolerance class for metric threads:
Male thread = 6g.
Female thread = 6H.
Page 5
CPVB7N - Front Tie Rod Extension
Caution:
1. Depth of the tapped holes must be less than thickness of rod cover (dimension N1).
2. Mounting holes (J2) must not interfere with the tie rod P.C.D. (dimension øC).
Page 6
How to order special piston rod end thread
C magnet PV body mount construction bore - stroke piston rod end type - SP
Male Thread
A= .............................................
AL = ...........................................
K - Ref to Page 4
KA - Ref to Page 4
MM = .........................................
D = Ref to Page 4
Female Thread
WH = ..........................................
BL = ............................................
K - Ref to Page 4
KA - Ref to Page 4
NN = ...........................................
D - Ref to Page 4
H= .............................................
L= ..............................................
øM = .........................................
(max = øD)
N= .............................................
width of slot
R= ..............................................
depth of slot
T= ..............................................
centre line of cross drilled hole
øU = ...........................................
Note: SP Rod ends not compatible with Piston Rod End accessories diameter of pin hole
on page 7 and 8
Page 7
Single Rod Clevis (I)
Material: Cast Iron
Applicable Bore
Part No A1 E1 L1 MM R1 NZ U1 ND H10 NX
Size
Y-05C 80, 100 27 28 60 M18x1.5 15 38 27 12 +0.07/0 16 +0.3/+0.1
Y-08C 125 37 36 71 M22x1.5 19 55 28 18 +0.07/0 28 +0.3/+0.1
Y-10C 160, 200 37 40 83 M26x1.5 21 61 20 20 +0.084/0 30 +0.3/+0.1
Y-18 250, 300, 350, 400 71 70 125 M40x1.5 42.5 100 54 40 +0.1/0 50 +0.3/+0.1
Y-20 450, 500 71 70 125 M45x1.5 42.5 100 54 40 +0.1/0 50 +0.3/+0.1
Clevis Pin
Material: Carbon Steel, (304 Stainless Steel Optional)
Applicable Bore
Part No
Size
L l m d (thru holes) D d9 SPLIT PIN
Applicable Bore
Part No d H B C D
Size
NUT_NT-05SUS 80, 100 M18x1.5 11 27 31.2 26
NUT_NT-08SUS 125 M22x1.5 13 32 37 31
Cylinder Weight
Caution:
1. These are guidelines only which must be substantiated by using additional
data. Specify your application.
2. Force values in the table are considered that cylinder is mounted by rigid
front flange, correctly aligned to valve.
Options
Listed below are some special options, which can be supplied and fitted with CPV
actuators.
(Customer must provide specifications)
Customer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Phone . . . . . . . . . . . . . . . . . . .
Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
............................................ Fax: . . . . . . . . . . . . . . . . . . . . .
Order No . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact . . . . . . . . . . . . . . . . . .
Quantity Required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C magnet PV body mount construction bore - stroke piston rod end type - SP
Cylinder P/No. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .