Professional Documents
Culture Documents
Conclusion PLC FESTO
Conclusion PLC FESTO
Ethernet la cual opera a través de dos capas del modelo OSI, así primero se debe
realizar la conexión de los compontes de la capa física del modelo OSI, aquí lo
que se debe hacer es conseguir un cable UTP y realizar la conexión de los
dispositivos que conformarán la red, que en este caso serán el PLC y la
computadora.
Once you have the devices connected to each other you proceed with the
data link layer of the OSI model which deals with the limitations, this layer is
divided into two sub-layers; the MAC sub-layer (Control of Access to the Medium)
is in charge of communicating the physical components and prepares the data to
transmit them through the media, and the LLC sub-layer (Logical Link Control) is in
charge of the communication between the upper layers and the network software,
and the lower layers, which is usually the hardware.
With this the network is configured and communication can begin, in this
case a small programming code was made in staircase to program the FESTO
PLC and check its operation.