Professional Documents
Culture Documents
6 BOQ For Tender BSVS Sutanpur
6 BOQ For Tender BSVS Sutanpur
Baroda Swarojgar
Vikas Sansthan
OWNER:
Bank Of baroda Zonal Office
LUCKNOW
ARCHITECTS:
M/S STHAPATI
ASSOCIATES PVT. LTD.
1/24 VIPUL KHAND,
GOMTI NAGAR, LUCKNOW
ABSTRACT OF COST
PROJECT :
BSVS , Sultanpur , UP
COST (lacs)
S. NO. DESCRIPTION OF ITEM
A CIVIL
CIVIL
INTERIOR
SUB - TOTAL
B ELECTRICAL
Internal
Date Networking
External
SUB - TOTAL
C PLUMBING
Internal Sanitary
External Sanitary
Rain Water Harvesting
Fire Fighting
Septic Tank & Soak Pit
Boring
SUB - TOTAL
GRAND TOTAL
BOQ/Tender Part-II - BSVS - CIVIL
Sl.No. Description Unit Qty Rate Rate/Rate In Words Amount
(1) (2) (3) (4) (5)' (6) (7)
EARTH WORK
1 Earth work in excavation by mechanical means (Hydraulic
excavator) / manual means in foundation trenches or drains
(exceeding 1.5 m in width or 10 sqm on plan), including
disposal of excavated earth, lead upto 50m and lift upto 1.5
m, disposed earth to be levelled and neatly dressed.
4 Supplying and filling in plinth with sand under floors cum 35.70
including, watering, ramming consolidating and dressing
complete.
ATT
5 Along external wall where the apron is not provided using metre 212.60
chemical emulsion @ 7.5 litres / sqm of the vertical surface
of the substructure to a depth of 300 mm including
excavation channel along the wall & rodding etc. complete
With Chlorpyriphos/ Lindane E.C. 20% with 1%
concentration
6 Treatment of soil under existing floors using chemical
emulsion @ one litre per hole, 300 mm apart including
drilling 12 mmdiameter holes and plugging with cement
mortar 1 :2 (1 cement: 2 Coarse sand) to match the existing
floor:2.35.3.1
CONCRETE WORK
9 Providing and laying in position cement concrete of
specified grade excluding the cost of centering and
shuttering - All work up to plinth level :
1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone cum 84
aggregate 40 mm nominal size)
DPC
10 Providing and laying damp-proof course 50mm thick with sqm 52.00
cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4
graded stone aggregate 20mm nominal size).
FORM WORK
12 Centering and shuttering including, propping etc and
removal of form for :
Foundations, footings, bases of columns, etc. for mass sqm 258.60
concrete
Suspended floors, roofs, landings balconies and access sqm 205.60
platform
Lintels, beams, plinth beams, girders, bressumers and sqm 808.80
cantilevers
Columns, Pillars, Piers, Abutments, Posts and Struts sqm 207.80
Stairs, (excluding landings) except spiral-staircases. sqm 61.50
STEEL REINFORCEMENT
13 Reinforcement for R.C.C work including straightening,
cutting, beding, placing in position and binding all complete
upto plinth level
Thermo-Mechanically Treated bars of grade Fe-500D or Kg 45485.80
more
GRANITE WORK
16 Providing and laying Polished Granite stone flooring in
required design and patterns, in linear as well as curvilinear
portions of the building, all complete as per the architectural
drawings, with 18 mm thick stone slab over 20 mm (average)
thick base of cement mortar 1:4 (1 cement : 4 coarse sand),
laid and jointed with cement slurry and pointing with white
cement slurry admixed with pigment of matching shade,
including rubbing, curing and polishing etc. all complete as
specified and as directed by the Engineer-in-Charge.
Polished Granite stone slab jet Black, Cherry Red, Elite sqm
Brown, Cat Eye or equivalent.
19 Extra for providing opening of required size & shape for Each 12.00
wash basin/ kitchen sink in kitchen platform, vanity counter
and similar location in marble/ Granite/ stone work,
including necessary holes for pillar taps etc. including
moulding, rubbing and polishing of cut edges etc. complete.
20 DOORS/WOOD WORK
a Providing and fixing Pre-laminated flat pressed 3 layer
(medium density) particle board or graded wood particle
board IS : 3087 marked, with one side decorative and other
side balancing lamination Grade I, Type II exterior grade IS :
12823 marked, in shelves with screws and fittings wherever
required, edges to be painted with polyurethane primer
(fittings to be paid separately).
25 mm thick sqm 44.70
21 Providing and fixing angle iron frames for doors, windows kg 472.80
and ventilators of mild steel Angle sections of size 35x35x5
mm, joints mitred and welded by angle iron 35x35x5 mm or
35x 5 mm flat pieces to the existing T-iron frame or to the
wall with dash fastener, including fixing of necessary butt
hinges and screws and applying a priming coat of approved
steel primer, all complete as per the direction of Engineer-In-
charge.
27 Providing and fixing bright finished brass 100 mm mortice Each 8.00
latch and lock ISI marked with six levers and a pair of
anodised (anodic coating not less than grade AC 10 as per
IS: 1868) aluminium lever handles of approved quality with
necessary screws etc. complete
21 GLASS WORK
Providing and fixing 12mm thick frameless toughened glass sqm 3.15
door shutter of approved brand and manufacture, including
providing and fixing top & bottom pivot & spring type
fixing arrangement and making necessary holes etc. for
fixing required door fittings, all complete as per direction of
Engineer-in-charge.Polyester powder coated minimum
thickness 50 micron Aluminium tubular handle bar included
with stopper and complete in all respects.
FLOORING
22 Kota stone slab flooring over 20 mm (average) thick base
laid over and jointed with grey cement slurry mixed with
pigment to match the shade of the slab, including rubbing
and polishing complete with base of cement mortar 1 : 4 (1
cement : 4 coarse sand) :
25 mm thick sqm 557.70
23 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate) finished with a floating coat of neat
cement, includingcement slurry, but excluding the cost of
nosing of steps etc. complete.
25 Providing and laying Ceramic glazed floor tiles of size sqm 10.00
300x300 mm (thickness to be specified by the manufacturer)
of 1st quality conforming to IS : 15622 of approved make in
colours such as White, Ivory, Grey, Fume Red Brown, laid
on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse
sand), jointing with grey cement slurry @ 3.3kg/sqm
including pointing the joints with white cement and
matching pigment etc., complete.
Medium shade pigment using 50% white cement 50% Grey sqm 6.00
cement
FALSE CEILING
28 12.5 mm thick tapered edge gypsum plain board conforming sqm 12.00
to IS: 2095- Part I
29 ROOFING
FINISHING
30 12 mm cement plaster finished with a floating coat of neat
cementof mix
1:4 (1 cement: 4 fine sand sqm 1894.70
PAINTING
32 Interior
Distempering with oil bound washable distemper of
approved brand and manufacture to give an even shade :
New work (two or more coats) over and including water sqm 1902.00
thinnable priming coat with cement primer.
33 Exterior
Finishing walls with water proofing cement paint of required
shade :
New work (Two or more coats applied @ 3.84 kg/10 sqm) sqm 2141.00
BOQ-BSVS-INTERIOR
S.No. Description Unit Quantity Rate Rate In Words Amount
37 Supplying and fixing chairs in class room with writing
pad of size (H-840 X W 460 X D400) WITH PU
HANDLE,SEAT & BACK HD FOAM STEEL FRAME PIPE 1
INCH 16 GAUGE Nos. 70
38
Supplying and fixing revolving chair for faculty in class
room of size (965 X 700 X 700) with central tilt,PU
Foam Seat & Back, with gas lift & steel inserted Base. Nos. 2
39
Supply and fixing steel table for faculty in class room
with ONE DRAWER should have 18 mm thick pre lam
TOP SIZE:W-900 X D-600 X H-755 MM Nos. 2
40 Supply and fixing revolving chair for staff in office and
faculty room of Size:(970 X 650 X 580) with Push
Back,PU Foam Seat & Back, with gas lift & steel
inserted Base. Nos. 6
41 Supplying and fixing table for staff in office and faculty
room with MOBILE PEDESTAL which should have 25
mm thick pre lam work top with duck Nose bidding &
16 mm thick Nos. 6
42 Supplying and fixing fixed back chair for visitors in
faculty and staff room made of PU Foam Seat & back
Size: (800 X 610 X 550) Nos. 5
43
Supplying and fixing revolving chair in work shop of
Size:(970 X 650 X 580) with Push Back,PU Foam Seat &
Back, with gas lift & steel inserted Base. Nos. 6
44 Supplying and fixing table in work shop with MOBILE
PEDESTAL which should have 25 mm thick pre lam
work top with duck Nose bidding & 16 mm thick legs
Size (1200 X 900 X 750), Pedestal Size: size (400 X 485
X 665) Nos. 6
45 Supplying and fixing fixed back chair with handle in
computer lab made of PU Foam Seat & back Size: (800
X 610 X 550) Nos. 8
46 Supplying and fixing table in computer lab which
should have 18 mm thick pre lam TOP SIZE:W-900 X
D-590 X H750 MM Nos. 8
BOQ For Tender BSVS Page 15
Sl.No. Description Unit Qty Rate Rate/Rate In Words Amount
47 Supplying and fixing fixed back chair with handle in
common room made of HD Foam Seat & back Size:
(880 X 580 X 580) Nos. 8
48 Supply and fixing table in common room which should
have 25 mm thick pre lam work top with duck Nose
bidding & 16 mm thick legs Size(L-1800 X W-1200 X H-
750) Nos. 1
49
Supply and fixing revolving chair in director room of
size (965 X 700 X 700) with central tilt,PU Foam Seat &
Back, with gas lift & steel inserted Base. Nos. 1
50 Supplying and fixing fixed back visitor's chair with
handle in director room made of PU Foam Seat & back
Size: (800 X 610 X 550) Nos. 6
51 Supplying and fixing table in director room with ERU &
MOBILE PEDESTAL which should have 25 mm thick pre
lam work top with duck Nose bidding & 16 mm thick
legs Size (L-1200 X W- 900 X H-750), Pedestal Size:
size (400 X 485 X 665), ERU SIZE: size (1060 X 420 X
690) Nos. 1
52 Supplying and fixing computer table in director room
which should have 18 mm thick pre lam W-1230 X D-
610 X H770 MM Nos. 1
53 Supplying and fixing bunker bed of size 2005 L x 987 W
x 750 H with mattress size 1905 x 915 (75"x36") of
MILD STEEL TUBULAR SECTION Ø 19.05 / R. tube 50.8
x 25.4 / S. Tube 19.05 x 19.05 / 40 x 40 / 20 swg & 21
swg Nos. 18
54 Supplying and fixing dining table made of stainless
steel tubular section of 304 grade with dining table
upto top of 16 to 18 mm thick. Nos. 2
63 Wiring for twin control light point with 1.5 sqmm. FR PVC
insulated copper cunductor single core cable in Surface/
recessed medium class PVC conduit, 2 way modular switch,
modular plate, suitable size G.I.box and earthing the point
with 1.5sqmm FR PVC insulated copper conductor single
core cable etc. as required. Each 4
40 Amps Each 4
63 Amps Each 2
TELEPHONE / TELEVISION
76 Supplying and drawing following pair 0.5 sqmm FR PVC
insulated annealed copper conductor, unarmoured telephone
cable in the existing surface/recessed steel/PVC conduit as
required.
2 Pair Metre 315
EARTHING
Each 38
COMPUTER POINTS
100 Supplying and fixing of 1 No. 16 A modular switch and 2
Nos. 6A modular socket & 1 No.16 A modular socket
including metal box (recessed/ surface) Each 13
104 Providing, laying and fixing following dia G.I. pipe (medium
class) in ground complete with G.I. fittings including
trenching (75 cm deep)and re-filling etc as required
50 mm Dia Metre 85
105 Providing, laying and fixing follwing dia RCC pipe NP2
class (light duty) in ground complete with RCC collars,
jointing with cement mortar 1:2 (1 cement : 2 fine sand)
including trenching (75cm deep) and refilling etc as
required.
100mm dia Metre 35
150mm dia Metre 35
EARTHING
L.T. CABLES
109 Supply and laying of aluminium conducter, PVC insulated
armoured, served, sheeted cables 1100 bolts grade at a depth
of 750mm below ground level over a cushion of 75mm thick
sand all round and protected with burnt bricks on sides and
on top. on surface, the cable run shall be fixed on M.S.
clamps etc. of suitable size or as directed by the Engineer-
Incharge, complete in all respect. the armouring of the cable
sall be property connected with the earth conductor by
clamps etc.
10 sqmm 2.0core Metre 175
10 sqmm 4.0core Metre 250
185 sqmm 3.5core Metre 95
EXTERNAL LIGHT
110 Supply and Fixing of steel tubular pole 7.5 Metre long
designated 410 SP-6 in 1:3:6 cement concrete foundation
including excavation back filling etc.complete in all respects. Set 6
111 Supply and fixing of LED street Fitting having die cast
'Aluminium' body and diffuser with driver set Suitable for
20watt to 50 watt confirming to IP 65 and above protection
on G.I.Pipe bracket complete in all respects.on pole. Each 6
113 Painting of the pole with 2 coats of aluminium paint over red
oxide primer complete in all respects. Each 6
BOQ For Tender BSVS Page 24
Sl.No. Description Unit Qty Rate Rate/Rate In Words Amount
114 S/F of 32A 415 V TP metal clad rewireable type switch fuse
unit on angle iron bracket complete in all respects. Each 1
SAFETY EQUIPMENTS
115 Supply and fixing danger board fabricated from 10 gauge
M.S. Sheet as per I.E. Rules. Each 1
120 First aid box St. John Ambulance Brigade or Indian Red
Cross Society to relevant IS 2217/1963. Each 1
Metering :
One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control
fuse & selector switch.
Bus Bar :
126 S/I of Patch cord CAT6 UTP 4 ft. Make Dlink/Amp Nos 13
127 S/I of Patch cord CAT6 UTP 7 ft. Make Dlink/Amp Nos 13
133 9U Floor Mount rack with front glass door and rear MS
Door ,6 socket Power Strip unit ,Cable manager, size
18”x24”x18” Nos 1
BOQ-BSVS-Internal Plumbing
S.N. Description Qty. Unit Rate Rate In Words Amount (Rs.)
SANITARY FIXTURES & ACCESSORIES : I
b) Same as above but for European type W.C. pan with white
plastic seat and lid.Make- Cera,Hindware. 14 Nos.
142 Providing and fixing white vitreous china flat back or wall
corner type lipped front urinal basin of 430x260x350 mm
and 340x410x265 mm sizes respectively with automatic
flushing cistern with standard flush pipe and C.P. brass
spreaders with brass unions and G.I clamps complete,
including painting of fittings and brackets, cutting and
a) One urinal basin with 5 litre white P.V.C. automatic
flushing cistern 1 Each
b) Range of two urinal basins with 5 litre white P.V.C.
automatic flushing cistern 1 Each
c) Range of three urinal basins with 10 litre white P.V.C.
automatic flushing cistern 0 Each
143 Providing and fixing stone slab table rubbed, edges rounded
and polished of size 75x50cm deep and 1.8cm thick fixed in
Urinal partitions by cutting a chase of appropriate width with
chase cutter and embedding the stone in the chase with
epoxy grout or with cement concrete 1:2:4 (1cement: 2coarse
sand: 4graded stone aggregate 6mm nominal size) as per
direction of Engineer-in-charge and finished smooth.
Granite Stone of approved shade 1 Sqm.
149 Providing and fixing C.P. brass Two-way angle valve for
EWC points & for fixing Ablution Health Fauct of approved
quality conforming to IS:8931. 15 mm nominal bore-ESSCO
SQT 526AKN 17 Each
151 Supplying & Fixing of CP soap tray fixed to the wall with
PVC rubber plug with CP brass screws- Make-ESSCO AEC-
1131 22 Each
Sub Total
a) 110mm 11 Nos.
158 Providing and fixing to the inlet mouth of rain water pipe
cast iron grating 15 cm diameter and weighing not less than
440 grams. 11 Nos.
Sub Total
161 Providing & fixing C.P. brass long body bib cock of
approved quality conforming to IS standards and weighing
a) 15mm nominal bore 8 Nos.
162 Providing & fixing C.P. brass angle valve for basin mixer
and gyser points of approved quality conforming to IS 8931
a) 15mm nominal bore 42 Nos.
163 Providing and fixing gun metal gate valve with wheel of
approved
a) 20 mm quality.
dia nominal bore 7 Each
b) 25mm dia nominal bore 3 Each
c) 32mm dia nominal bore 5 Each
d) 50mm dia nominal bore 1 Each
Sub Total
165 Providing, laying and joining glazed stone ware pipes grade
'A' with stiff mixture of cement mortar in the proportion of
1:1 (1 cement : 1 fine sand) including testing of joints etc.
a) 100mm diameter 45 M
b) 150mm diameter 110 M
167 Providing and fixing square mouth S.W. Gully trap grade 'A'
complete with C.I. grating brick masonry chamber with
F.P.S. bricks of class designation 75 and water tight C.I.
cover with frame of 300 x 300mm. size (inside) the weight
of cover
less thanto4.50
be not
Kg and frame to be not less than 2.70 Kg as
per150
a) standard
x 100 design.
mm. size P type
With Sewer bricks conforming to IS : 4885 8 Nos
Sub Total
SUMMARY OF COST
BOQ-BSVS-Exterior Plumbing
172 Providing, laying and joining glazed stone ware pipes grade
'A' with stiff mixture of cement mortar in the proportion of
1:1 (1 cement : 1 fine sand) including testing of joints etc.
a) 150mm diameter 45 M
179 Providing and fixing gate valve (with cap complete with
bolts, nuts, rubber insertion etc.
a) 65mm 1 Nos.
BOQ For Tender BSVS Page 38
Sl.No. Description Unit Qty Rate Rate/Rate In Words Amount
b) 50mm 1 Nos.
DRAINS -III
TOTAL(I+II)
TOTAL (III)
197 Providing, laying and joining glazed stone ware pipes grade
'A' with stiff mixture of cement mortar in the proportion of
1:1 (1 cement : 1 fine sand) including testing of joints etc.
complete.
a) 150mm diameter S.W. Pipe 105 M
b) 200mm diameter S.W. Pipe 5 M
PART B
199 Constructing brick masonry manhole with 75 class
designation F.P.S. bricks in cement mortar 1:4 (1 cement : 4
coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2
coarse sand: 4graded stone aggregate 20mm nominal size);
foundation concrete 1:4:8 mix
(1 cement :4 coarse sand: 8 graded stone aggregate 40mm
nominal size) inside plasstering 12mm thick with cement
mortar 1:3 (1 cement :3 coarse sand) finished with a floating
coat of neat cement and making channels in cement concrete
1:2:4
TOTAL PART A
TOTAL PART B
coarse sand : 4 gradded stone aggregae 20mm nominal size) 2.476 Cum
207 Providing M.S. foot rest including fixing with 20x20x10 cm.
cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6
gradded aggregate of nominal size 20mm ) as per standard
design with 20x20mm sq bars. 12 Nos.
208 Providing and fixing C.I. tee at the inlet and outlet of septic
tank. 2 Nos.
210 Providing & fixing of 75mm dia cast iron terminal guard. 1 No.
212 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45
cm dry brick honey comb shaft with bricks of class
designation 75 and S.W. drain pipe 100 mm diameter, 1.8m
long complete as per standard design.
With F.P.S. bricks 1 No.
BOQ-BSVS-Tubewell
223 Supply & fixing of CO2 type fire extinguisher, 6.5 kg.
capacity(ISI Marked IS:2878 & TAC approved) comlete
with initial charge and wall bracket, along with supply of all
materials and labour for proper completion of work.PWD-
2016-1132 (A) 6 Each
TOTAL ( A ) Rs
B)
225 S/I/T/C stand post type fire hydrant with 63mm. outlet
complete with bolts, nuts and rubber insertions etc. as per the
standard design conforming to 15-908-'75. 1.00 Each
SUB HEAD-I
227 Supply, erection and testing of ISI marked M.S pipes (Class
B) and specials etc. (as per IS : 1239) for above ground
laying for hydrants and sprinkler system including
transportation of materials upto the worksite, cutting the
pipes to required length, edge preperation, welding,
fixing/erection of pipes with suitable flat/angle iron
including specials i.e. bends tees, reducers, flanges etc. in
proper position including all supports as per layout,
including hangers for sprinkler piping, jointing by welding,
aligning the pipe line, painting with a primer coat and two
coats of synthetic enamel fire red colour, providing tapping
for pressure gauges and for other instruments etc.
Hydrostatic testing of system as specified, flushing &
cleaning by water etc. complete as per drawings & direction
of the Engineer-in-charge. The quoted rats shall also include
for making holes in masonry/RCC slab, wall, chases in wall
etc. & making good the same to original conditions.
MAKE : Jindal(Hissar)/ Bharat/Indian Tube/ Prakash)
a) 100mm 110 M
b)80mm 25 M
228 Supply & fixing in position ISI marked cast iron double
flanged butterfly valves as per IS :13095, suitable for
pressure 15 KG/cm2 including transporting to worksite,
supply & fixing nuts, bolts, gaskets, flanges & washers etc
including testing, complete as per drawing & directions of
the Engineer-in-charge. (MAKE : Kirloskar/
Venus/IVC/Zaloto/Kalpna)
100 MM NB 1.00 Nos
229 Supply & fixing in position ISI marked cast iron double
flanged Non Return Valves as per IS 5312, part -I including
transportation to worksite, supply & fixing nuts, bolts
gaskets and washers etc, complete with testing as per
direction of the Engineer-in-charge.
(MAKE : Kirloskar/ Venus/IVC/Zaloto/Kalpna)
100 MM NB 1.00 Nos
234 Providing & fixing standard firemans axe with heavy rubber
handle. 3.00 Nos
SUB HEAD-II