Professional Documents
Culture Documents
41403A - Guide - Rev - 12-20-17 - With Edits - 2-16-18
41403A - Guide - Rev - 12-20-17 - With Edits - 2-16-18
PRODUCT
GUIDE
DRY ERASE PAINT
AVAILABLE NOW!
Notable™ is a premium performance, two-component product that can be applied to almost any
substrate, including painted drywall, wood, glass, metal and laminate. The isocyanate-free, low odor
formula features a four-hour pot life, seven-day full cure time and 10-year warranty. Kits come
complete with two pre-measured components, a roller-cover, and application instructions in three
sizes – 50, 100 and 200 square feet. End-users can choose from white, for the classic whiteboard
look, or clear, to transform any of our 3,500+ colors into a dry erase surface.
• 10 year warranty
• Easy to erase
• Applicable to almost any surface
RECOMMENDED
VOCs COLORS
FILM THICKNESS
Wet 4 mils
< 150 g/L White & Clear
Dry 3.5 mils
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Table of Contents
Brand Product Type Product Lines Page Brand Product Type Product Lines Page
Manufacturing and Distribution Facilities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Professional Quality
Our History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Applicators Professional Quality Brushes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Family of Brand Roles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Professional Quality Roller Covers. . . . . . . . . . . . . . . . . . . . . . . . . . 54
BENJAMIN MOORE®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 BENJAMIN MOORE® COROTECH®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
The Gennex® Colorant Advantage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Industrial Coatings
Century® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Waterborne Primers Clear Acrylic Sealer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Acrylic Metal Primer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Premium Architectural Coatings
Water Reducible Epoxy Ester Primer. . . . . . . . . . . . . . . . . . . . . . . . 57
Primers Fresh Start®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Waterborne Bonding Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Sure Seal® Latex Primer Sealer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Alkyd Primers Universal Metal Primer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Premium Interior Aura® Waterborne Interior Paint & Primer. . . . . . . . . . . . . . . . . . . 12
Prep All Universal Metal Primer. . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Aura® Bath & Spa Waterborne Interior Paint & Primer . . . . . . . . . 13
Alkyd Shop Coat Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Natura® Waterborne Interior Paint & Primer . . . . . . . . . . . . . . . . . 14
Alkyd Fabrication Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Regal® Select Waterborne Interior Paint & Primer. . . . . . . . . . . . . 15
Shop Primer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Regal® Classic Premium Interior Paint . . . . . . . . . . . . . . . . . . . . . . 16
Specialty and
ben® Waterborne Interior Paint & Primer. . . . . . . . . . . . . . . . . . . . 17 Flooring Primers Polyamide Epoxy Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
ADVANCE® Waterborne Interior Alkyd. . . . . . . . . . . . . . . . . . . . . . . 18 100% Solids Epoxy Pre-Primer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Ceiling Paints Waterborne Ceiling Paint. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Moisture Tolerant Quick-Set Epoxy Sealer. . . . . . . . . . . . . . . . . . . . 62
Muresco® Ceiling Paint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Organic Zinc Rich Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Floor Paints Floor & Patio Latex Enamel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Waterborne Enamels Water Reducible Alkyd Enamel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Interior Clear Finishes BENWOOD® Stays Clear® Acrylic Polyurethane. . . . . . . . . . . . . . . . 21 Quick Dry Acrylic Spray DTM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Specialty Coatings Waterborne Satin Impervo®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Acrylic DTM Enamel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Satin Impervo® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Pre-Catalyzed Waterborne Wall Epoxy. . . . . . . . . . . . . . . . . . . . . . 65
Impervex® Latex High Gloss Enamel. . . . . . . . . . . . . . . . . . . . . . . . 23 Alkyd Enamels Alkyd Urethane Enamel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Kitchen & Bath. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Water Reducible Alkyd Enamel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Studio Finishes® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Rapid Dry Alkyd Enamel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Premium Exterior Aura® Waterborne Exterior Paint. . . . . . . . . . . . . . . . . . . . . . . . . . . 26 High-Solids Rapid-Dry Enamel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Regal® Select Exterior Paint. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Quick Dry Alkyd Enamel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Regal® Select Exterior Paint — High Build . . . . . . . . . . . . . . . . . . . 28 Specialty Enamels Electrostatic Alkyd Enamel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Regal® Select Exterior REVIVE® for Vinyl Siding. . . . . . . . . . . . . . . 29 Silicone Alkyd High-Heat Coating . . . . . . . . . . . . . . . . . . . . . . . . . . 69
ben® Waterborne Exterior Paint . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Epoxies Epoxy Mastic Coating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Premium Interior/Exterior Aura® Grand Entrance®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Epoxy Patch Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
ben Chalkboard Paint. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Polyamide Epoxy Coating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Advanced Waterborne Stain ARBORCOAT® Waterborne Exterior Stains. . . . . . . . . . . . . . . . . . . . 32 Fast-Dry Polyamide Epoxy Coating. . . . . . . . . . . . . . . . . . . . . . . . . 71
Classic Oil Finishes ARBORCOAT® Classic Oil Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 100% Solids Epoxy Floor Coating. . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Prep Products Benajmin Moore® Prep Products . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Waterborne Amine Epoxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Extender Benajmin Moore® Paint Extender . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Waterborne Acrylic Epoxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Professional Coatings Flooring Additives Anti-Slip Aggregate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Benjamin Moore® Urethanes Aliphatic Acrylic Urethane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Professional & Commercial Benjamin Moore® Professional & Commercial Aliphatic Urethane Coating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Products Products. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Polyester Urethane. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Super Hide® Zero VOC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Waterborne Urethane. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Professional Primers Super Spec® Interior Primers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Aromatic Moisture-Cured Urethane. . . . . . . . . . . . . . . . . . . . . . . . . 77
Super Spec® Exterior Alkyd Primer . . . . . . . . . . . . . . . . . . . . . . . . . 38 Specialty Products Acrylic Block Filler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Professional Interior Super Spec® Interior Finishes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Waterborne Epoxy Block Filler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Professional Coal Tar Epoxy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Specialty Coatings Super Spec® HP Alkyd Metal Primer . . . . . . . . . . . . . . . . . . . . . . . . 40 Rust Arrestor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Super Spec® HP Urethane Alkyd Gloss Enamel. . . . . . . . . . . . . . . . 40 Cleaning, Prep
Super Spec® HP D.T.M. Alkyd Enamels. . . . . . . . . . . . . . . . . . . . . . . 41 & Solvent Products Cleaning & Prep Products. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Professional Interior Eco Spec® WB Silver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Urethane Reducer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Eco Spec® WB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Brushing Reducer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Specialty Interior Primers Ultra Spec® Specialty Interior Primers. . . . . . . . . . . . . . . . . . . . . . . 44 Xylene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Professional Epoxy Thinner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Masonry Products Ultra Spec® Interior/Exterior Masonry Primers/Sealers. . . . . . . . . 45 Alkyd Gloss and Hardness Catalyst . . . . . . . . . . . . . . . . . . . . . . . . . 82
Ultra Spec® Masonry 100% Acrylic Elastomeric. . . . . . . . . . . . . . . . 46
CORONADO® Paints and Coatings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Professional Interior Ultra Spec® SCUFF-X® Interior Latex Paint. . . . . . . . . . . . . . . . . . . . 47
Interior Paint Coronado Grand® Acrylic Paint & Primer. . . . . . . . . . . . . . . . . . . . . 84
Ultra Spec® 500. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Tough Walls Acrylic Paint & Primer. . . . . . . . . . . . . . . . . . . . . . . . . 85
Professional Exterior Ultra Spec® EXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Tough Walls Alkyd Semi-Gloss Enamel. . . . . . . . . . . . . . . . . . . . . . 86
Ultra Spec® Exterior Acrylic Stain. . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Super Kote 5000® Zero. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Professional
Specialty Coatings Ultra Spec® HP D.T.M Acrylic Enamels . . . . . . . . . . . . . . . . . . . . . . . 51 Super Kote 5000® Acrylic Latex Paint . . . . . . . . . . . . . . . . . . . . . . . 88
Custom-Crafted Applicators Custom-Crafted Brushes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Super Kote® 3000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Custom-Crafted Roller Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Super Kote® 1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
1
Table of Contents
Brand Product Type Product Lines Page Brand Product Type Product Lines Page
CORONADO® Paints and Coatings (Continued) . . . . . . . . . . Interior Wood Flooring Polyurethane Wood Floor Finish. . . . . . . . . . . . . . . . . . . . . . . . . . 115
Primers Super Kote 5000® Acrylic Latex Primer. . . . . . . . . . . . . . . . . . . . . . 91 Polyurethane Wood Floor Finish (350 VOC) . . . . . . . . . . . . . . . . . 115
Super Kote® 3000 Acrylic Latex Primer. . . . . . . . . . . . . . . . . . . . . . 91 CourtTime Gym Floor Finish. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Exterior Paint Cryli Cote® 100% Acrylic Exterior Paint . . . . . . . . . . . . . . . . . . . . . . 92 RapidSeal Dual-Purpose Sealer. . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Super Kote 5000® Exterior. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Moisture Cure Urethane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Rust Preventive Interior Wood Floor
& Waterborne Enamels Rust Scat® Waterborne Acrylic Enamels. . . . . . . . . . . . . . . . . . . . . 94 Cleaning & Prep Degreaser Floor Cleaner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Rust Scat® Polyurethane Enamels. . . . . . . . . . . . . . . . . . . . . . . . . . 95 Floor Cleaner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Masonry Coatings Masonry Coatings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Clear Conversion
Coronado® Elastite® Concrete Coatings. . . . . . . . . . . . . . . . . . . . . . 97 Varnishes MegaVar® Plus High Solids Water White
Specialty Coatings Specialty Products. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Conversion Varnish. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Super Kote 5000® Dry Fall Coatings. . . . . . . . . . . . . . . . . . . . . . . . . 99 MegaVar® High Solids Water White Conversion Varnish . . . . . . . . . 119
Super Kote 5000® Acrylic Knock Down. . . . . . . . . . . . . . . . . . . . . 100 MegaVar® High Solids Water White Conversion Sealer. . . . . . . . . . 120
Exterior Stains Coronado® Maxum® Stains and Primers . . . . . . . . . . . . . . . . . . . . 101 Clear Precatalyzed
Lacquers UltraMax® Plus Water White Precatalyzed Lacquer . . . . . . . . . . . 121
Insl-x® Specialty Coatings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 UltraLaq® Water White Precatalyzed Lacquer. . . . . . . . . . . . . . . . 121
Primers Aqua Lock® Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 UltraLaq® Vinyl Sealer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Prime Lock Plus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 UltraMax® 550 VOC Water White Precatalyzed Lacquer. . . . . . . . . . 122
Oder Less. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 Pigmented Conversion
Seal Lock® Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 Varnishes & Precats MegaVar® White Conversion Varnish. . . . . . . . . . . . . . . . . . . . . . . 123
Block Out® Exterior Primer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 UltraLaq® White Precatalyzed Lacquer . . . . . . . . . . . . . . . . . . . . . 123
Floor Coatings GarageGuard® Waterborne Epoxy Garage Floor Coating. . . . . . . 104 CAB/Acrylic Finishes Ultra UniLaq® Cellulose Acetate Butyrate (CAB) /
Hot Trax® Epoxy Fortified Acrylic Concrete and Acrylic Clear Finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Garage Floor Paint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Ultra UniLaq® Cellulose Acetate Butyrate (CAB) /
Tough Shield® Floor & Patio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Acrylic White Finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Sure Step® Anti-Slip Coating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Ultra UniLaq® Cellulose Acetate Butyrate (CAB) /
Insl-x® Decorative Floor Flakes . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Acrylic Sealer and Undercoater . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Masonry Coating TuffCrete® Acrylic Epoxy Clear Bonding Primer/Sealer . . . . . . . . 105 Nitrocellulose Lacquers DuraLaq® Water White Nitrocellulose Lacquer. . . . . . . . . . . . . . . 126
TuffCrete® Solvent Acrylic Concrete Stain & Waterproofing Sealer . . . 105 DuraLaq® High Build Pro Nitrocellulose Lacquer. . . . . . . . . . . . . .127
TuffCrete® Waterborne Acrylic Concrete Stain . . . . . . . . . . . . . . . 105 DuraLaq® Pigmented Lacquer and Undercoater. . . . . . . . . . . . . . 128
Waterblock® Acrylic Masonry Waterproofer Interior-Exterior . . . . 105 DuraLaq® Nitrocellulose Lacquer Tint Base. . . . . . . . . . . . . . . . . . 129
Pool Paints Waterborne Swimming Pool Paint . . . . . . . . . . . . . . . . . . . . . . . . 106 275 VOC Conversion
Varnishes MegaVar® 275 VOC Water White Conversion Varnish. . . . . . . . . . 130
Rubber Based Swimming Pool Paint. . . . . . . . . . . . . . . . . . . . . . . 106
275 VOC Precatalyzed
Epoxy Swimming Pool Paint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Lacquers UltraLaq® 275 VOC Water White Precatalyzed Lacquer. . . . . . . . . . 131
Chlorinated Rubber Swimming Pool Paint. . . . . . . . . . . . . . . . . . 106
UltraLaq® 275 VOC White Precatalyzed Lacquer. . . . . . . . . . . . . . 131
Traffic Coatings Latex Traffic Paint. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
275 VOC Nitrocellulose
Acrylic Fast-Set Traffic Paint. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Lacquers DuraLaq® 275 VOC Water White
Alkyd Traffic Paint. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Nitrocellulose Lacquer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Athletic Coatings Athletic Field Marking Paste. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 DuraLaq® 275 VOC Production High Build Lacquer. . . . . . . . . . . . 132
Acrylic Field Marking Paint. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 DuraLaq® 275 VOC White Nitrocellulose Lacquer . . . . . . . . . . . . . 133
Tru-flex® Concrete Bond Coat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Waterborne Systems MegaVar® Waterborne Urethane Premium Finish . . . . . . . . . . . . 134
Tru-flex® Smooth Colored Finished Coats. . . . . . . . . . . . . . . . . . . 108 DuraLaq® Waterborne Acrylic Clear Finish . . . . . . . . . . . . . . . . . . 134
Tru-flex® Patch N Level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 DuraLaq® Waterborne Acrylic Pigmented Finish . . . . . . . . . . . . . 135
Tru-flex® Line Marking Paint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Wiping Stains QuickStain® Alkyd Wiping Stain. . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Tru-flex® Neutral Filler Coat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 QuickStain® Lacquer Wiping Stain. . . . . . . . . . . . . . . . . . . . . . . . . 136
Tru-flex® Cushion Coat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 QuickStain® Waterborne Wiping Stain . . . . . . . . . . . . . . . . . . . . . 136
Tru-flex® Textured Colored Finish Coats . . . . . . . . . . . . . . . . . . . . 108 Glazes QuickStain® Traditional Oil-Based Glaze. . . . . . . . . . . . . . . . . . . . 137
Specialty Coatings Cabinet Coat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 QuickStain® Breakaway Glaze Base. . . . . . . . . . . . . . . . . . . . . . . . 137
Stix® Waterborne Bonding Primer. . . . . . . . . . . . . . . . . . . . . . . . . 109 Dyes QuickStain® Dye and Concentrate . . . . . . . . . . . . . . . . . . . . . . . . . 138
Lead Block® Lead Encapsulant. . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Specialty Coatings DuraLaq® Waterborne Booth Coater . . . . . . . . . . . . . . . . . . . . . . . 139
Freezer Kote. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 DuraLaq® Crackle Finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Latex Fire Retardant Paint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 QuickStain® Gilsonite Grain Enhancer . . . . . . . . . . . . . . . . . . . . . . 139
LENMAR® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Solvents and Thinners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Homeowner Catalysts and Additives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Wood Finishes Waterborne Interior Wiping Stain. . . . . . . . . . . . . . . . . . . . . . . . . . 111 Useful Information 141
Spar Varnish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Environmental Commitment & Product Certifications . . . . . . . 141-143
Aqua-Plastic® Waterborne Urethane. . . . . . . . . . . . . . . . . . . . . . . . 111 Approved Products MPI Standards. . . . . . . . . . . . . . . . . . . . . 144-149
Waterborne Wood LEED V4 Credit Qualifying Products. . . . . . . . . . . . . . . . . . . . . . . . 150
Floor Finishes ClearCoat PRO Waterborne Floor Finish . . . . . . . . . . . . . . . . . . . . 112
Product Index By Brand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151-164
ClearCoat PRO HT Waterborne Floor Finish. . . . . . . . . . . . . . . . . . 112
ClearCoat PRO XD Waterborne Floor Finish. . . . . . . . . . . . . . . . . . 113
ClearCoat PRO Waterborne Floor Sealer. . . . . . . . . . . . . . . . . . . . 113
One-Component Waterborne Floor Sealer, ECH20 . . . . . . . . . . . . 114
2
Manufacturing and Distribution Facilities
In order to most effectively service our retailers, the company has established manufacturing and distribution
facilities throughout the United States and Canada. This assures a continuous supply of coatings to the retailers
and their customers, with prompt, on-time deliver.
Call 1-800-761-2623 or see benjaminmoore.com for the location of the authorized Benjamin Moore® retailer nearest you.
Please check with your local retailer before making your selection. 3
Our History
Known for technological innovation, product leadership, and unrivaled color, Benjamin
Moore & Co. is a definitive leader in the paints and coatings industry—and your partner in
beautifying and protecting residential and commercial properties.
Benjamin Moore & Co. began in 1883, when Benjamin Moore and his brother, Robert, first
opened Moore Brothers in Brooklyn, New York. As true entrepreneurs, they started with just
$2,000 and one product, Moore’s Prepared Calsom Finish.
Today, under the Berkshire Hathaway family, we remain committed to their vision of
producing the highest quality paints and finishes in the industry and delivering them to
customers through a network of over 3,100 independent retailers.
Our portfolio of premium, products includes four brands: Benjamin Moore®, Insl-x®,
Coronado®, and Lenmar®. This range of offerings allows us to provide solutions for every
job and specification category, making it easier for contractors and specifiers to get the
products they need from one source.
Additionally, we manufacture our own resins and zero-VOC* Gennex® colorants, which allow us to create products that
are low-VOC and zero-VOC*, even after tinting. Gennex colorants are resin-rich, so they fortify the paint and allow the
tinted product to maintain its original viscosity. As a result, paints tinted with Gennex colorants are easier to apply and
deliver a more durable, washable coating.
Today, Benjamin Moore continues to stand at the forefront of product innovation, with a commitment to research and
development that is unparalleled in the coatings industry. We are proud to be your partner, and with a team of 250+ Territory,
Specialty Coatings and Architectural & Design representatives, ready to support your every business need.
Need immediate assistance? Please contact the Benjamin Moore Global Contact Center
Order Processing Architects & Designer Hot Line
Phone: 1-866-236-6667 866-708-9181
Need immediate assistance? Our
Fax: 1-888-866-3900
Benjamin Moore hotlines have you covered:
info@benjaminmoore.com
Product Information
PaintOrders@benjaminmoore.com Hours of Operation M-F 7:00 am to 8:00 pm /
Hours888-236-6667
of Operation M-F 7:00 am to 8:00 pm / Sat 9-5 / Sunday 11-3 EST
Sat 9-5 / Sunday 11-3 EST
Contractor Hot Line NY Segments
Product Information Phone: 1-877-926-5679
866-708-9180
Phone: 1-866-236-6667 Fax: 862-432-4269
Architects & Designer Hot Line
Productinformationgroup@benjaminmoore.com NYcomsegs@Benjaminmoore.com
Hours of Operation M-F 7:00 am to 8:00 pm / Hours of Operation M-F 7:00 am to 7:00 pm /
866-708-9181
Sat 9-5 / Sunday 11-3 EST Sat 9-5 / Sunday Closed EST
Or
Credit email us
Processing at: info@benjaminmoore.com
(Finance) International Orders
Phone 1-866-236-6667 Phone U.S. Territories: 1-866-236-6667
customerservicecredits@benjaminmoore.com VOIP Use: 862-219-6209
Hours of Operation M-F 7:00 am to 7:00 pm Local Time / Mexico Toll Free: 018000623788
Sat – Sunday Closed EST Fax: 1-201-474-4615
internationalorders@Benjaminmoore.com
National Accounts Program
Hours of Operation M-F
Phone: 1-877-623-8484
custcare@Benjaminmoore.com Consumers
Hours of Operation M-F 7:00 am to 7:00 pm / 855-724-6082
Sat 9-5 / Sunday Closed EST info@benjaminmoore.com
Hours of Operation M-F 7:00 am to 8:00 pm /
Contractor Hot Line
Sat 9-5 / Sunday 11-3 EST
866-708-9180
info@benjaminmoore.com
Hours of Operation M-F 7:00 am to 8:00 pm /
Sat 9-5 / Sunday 11-3 EST
4 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations.
Please check with your local retailer before making your selection.
Benjamin Moore & Co. Family of Brand Roles
At Benjamin Moore & Co., we believe that being a premium brand in the paint and coatings market means
delivering both the best quality products available and continually improving those products.
Towards that goal, each of the brands we offer has a distinct focus. This helps our customers more easily
find products to meet the specific needs.
• Industrial Maintenance
• High-Performance Coatings – Primers, Enamels, www.benjaminmoore.com
Epoxies, Urethanes and More
®
• Specialty Products & Multipurpose Primers
Insl-x.com
• Pool Paints
5
BENJAMIN MOORE
Benjamin Moore®
BENJAMINMOORE.COM
Manufactured with our own proprietary resins, But zero-VOC* Gennex® colorants actually fortify
Gennex® waterborne colorants are what sets the paint, so it maintains its original viscosity in all
Benjamin Moore® paints apart from the competition. colors, delivers a more durable finish, and maintains
true scrubbability. This makes the paint easier to
Typical colorants weaken paint and make it thinner work with and ensures that your clients will be
and more difficult to apply. They also reduce the film’s satisfied with your work for years to come.
washability, allowing the color to rub off and fade.
The following Benjamin Moore® products are tinted with our proprietary, zero-VOC Gennex® colorants:
Aura® Interior, Aura® Bath & Spa, Aura® Exterior, Aura® Grand Entrance®, ben® Interior, ben® Exterior, Eco Spec ®,
ULTRA SPEC® 500, Regal® Select Interior, Regal® Select Exterior High Build, Regal® Select Exterior, Regal® Select
Exterior REVIVE®, ULTRA SPEC® EXT, ARBORCOAT ®, NATURA®, ADVANCE®, Waterborne Satin Impervo®,
Impervex ®, Waterborne Ceiling Paint, Kitchen & Bath, Floor & Patio, FRESH START® High-Hiding All Purpose
Primer, and Chalkboard Paint.
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 7
†For the most up-to-date MPI specifications, visit www.mpi.net
8
EXPERIENCECENTURY.COM
CENTURY
CENTURY®
®
Century is a new dimension in paint designed for designers. The convergence of science and craftsmanship
in Century produced the first-of-its-kind Soft Touch Matte finish to enrich a curated collection of 75
sophisticated new colors. The formulation is so intricately balanced, Century is only made in small batches
that are pre-mixed and sealed to ensure the truest color and experience in every can. Century offers an
unrivaled depth and richness that transforms rooms and the entire color experience.
RECOMMENDED
VOCs COLORS
FILM THICKNESS
Wet 3.8 mils Available in
< 50 g/L
Dry 1.7 mils 75 pre-mixed colors
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 9
†For the most up-to-date MPI specifications, visit www.mpi.net
Primers
FRESH START
A complete line of premium primers ensures the best possible results by providing the proper foundation
for every finish coat. Choose from specialty products that solve problems with stains, moisture damage,
tannin bleeding and other common issues.
Key Advantages:
Fresh Start premium primers deliver the exceptional adhesion and holdout required for smooth and
durable topcoat. We offer specialty products formulated to address any painting condition or problem —
stains, moisture damage and other common issues.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
White, Qualifies for LEED® v4 Credit;
N023 Multi-Purpose Latex White Deep 31.8% 3 hrs. 400-450 1.2 47 MPI 6, 17, 17 X-Green™, 39, 137, 137 X-Green™,
Qualifies for CHPS low emitting credit
0511: A 100% acrylic zero VOC* interior latex primer that meets • Zero VOC* - Meets or exceeds strict environmental standards
or exceeds the most stringent environmental standards in the industry • Excellent Hide - Hides surface imperfections
while delivering maximum performance. • Fast Dry - Quick return to service saves money and reduces down time
10 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
®
Primers
Benjamin Moore®
BENJAMINMOORE.COM
A high-quality, 100% acrylic latex primer designed for a wide range of interior and exterior projects.
It delivers strong adhesion for all surfaces and excellent stain blocking and resistance in a low odor/low
VOC formula.
Key Advantages:
Sure Seal Latex Primer Sealer offers strong adhesion for all surfaces and excellent stain blocking and
resistance in low odor/low VOC formula.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Qualifies for LEED® v4 Credit;
027 Sure Seal® Latex Primer Sealer White 34.0% 1 hr. 400-450 1.3 48 MPI 6, 39, 137, 137 X-Green™,
Qualifies for CHPS low emitting credit
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 11
†For the most up-to-date MPI specifications, visit www.mpi.net
Premium Interior
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
0521: A 100% acrylic latex product intended to be used as a base coat • Extreme hide for fewer coats The use of Red or Yellow Color Foundation
under certain bright and transparent yellows and reds in order to achieve • Paint and primer together will depend on the finish coat color and
the desired finish coat color. • Quick turnaround time must be tinted appropriately.
0522, 0524, 0526, 0528: A super premium 100% acrylic interior • Proprietary Color Lock® technology for richer colors that Do not apply when air and surface
coating formulated using our proprietary Color Lock® technology for richer stay true over time temperatures are below 50°F (10°C).
and truer colors. Aura Interior is available in a wide variety of finishes and • Rich, thick paint that provides a beautiful finish
• Outstanding durability
is available in thousands of colors all tinted on our proprietary Gennex® • Stands up to repeated washing with no color rub-off
colorant system. • Extreme hide and coverage for fewer coats
• Mildew resistant
• Paint and primer together
• Seamless touch-ups
• Zero VOC*, low odor
• Benjamin Moore’s Green Promise® products
Benjamin Moore’s Green Promise® designation is our company’s assurance that this product meets – and often exceeds – rigorous
environmental and performance criteria regarding VOCs, emissions, application, washability, scrubbability, and packaging, while also
delivering the premium levels of performance you expect from Benjamin Moore.
12 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Premium Interior
Benjamin Moore®
BENJAMINMOORE.COM
Aura is the ultimate paint formulated for brilliant, rich and everlasting color. Aura Bath & Spa allows you
to achieve a luxurious matte finish color that will stand up to humidity. With the added benefits of Color
Lock technology and our proprietary Gennex colorant system, it delivers remarkable durability and
exceptional color.
Key Advantages:
Specifically formulated for optimum performance in high humidity environments such as baths and spas
in a desirable matte finish.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
0532 Aura® Bath & Spa Waterborne NA 1-4 45.1% 1 hr. 350-450 1.8 0 Qualifies for LEED® v4 Credit,
Interior Matte Finish Qualifies for CHPS low emitting credit
0532: A super premium 100% acrylic coating formulated to repel • Ideal for high humidity environments such as bathrooms and spas Do not apply when air and surface
moisture and maintain color integrity in extremely moist, humid • Proprietary Color Lock® technology for richer colors that stay true temperatures are below 50°F (10°C).
environments while remaining a matte finish. It provides over time
• Stands up to repeated washing with no color rub-off
a durable, protective coating that withstands repeated cleaning. • Mildew resistant for a fresh look that lasts
• Extreme hide and coverage for fewer coats
• Paint and primer together
• Zero VOC*, low odor
Benjamin Moore’s Green Promise® designation is our company’s assurance that this product meets – and often exceeds – rigorous
environmental and performance criteria regarding VOCs, emissions, application, washability, scrubbability, and packaging, while also
delivering the premium levels of performance you expect from Benjamin Moore.
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 13
†For the most up-to-date MPI specifications, visit www.mpi.net
Premium Interior
®
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Qualifies for LEED® v4 Credit; MPI 53, 53
0512 Natura® Waterborne Interior White 1-4 45.5% 1-2 hrs. 375-425 1.8 0 X-Green™, 143, 143 X-Green™,
Flat Finish Qualifies for CHPS low emitting credit
Qualifies for LEED® v4 Credit; MPI 44,
0513 Natura® Waterborne Interior White 1-4 44.0% 1-2 hrs. 375-425 1.8 0 44 X-Green™, 144, 144 X-Green™,
Eggshell Finish Qualifies for CHPS low emitting credit
Qualifies for LEED® v4 Credit; MPI 54,
0514 Natura® Waterborne Interior White 1-4 37.0% 1-2 hrs. 375-425 1.5 0 54 X-Green™, MPI HP 141, 141 X-Green™,
Semi-Gloss Finish Qualifies for CHPS low emitting credit
0512, 0513, 0514: A premium quality, zero VOC interior coating • Now Certified asthma & allergy friendly® Do not apply when air and surface
that provides a durable, washable and fade resistant finish. Natura is our • Zero VOC* temperatures are below 50°F (10°C).
greenest and most decorated paint and is available in Flat, Eggshell and • Zero emissions (measured at 4 hours after application)**
• Quick drying for same day return to service
Semi-Gloss finishes. Tinted on our proprietary Gennex® colorant system, • Provides a durable, washable finish
Natura is available in thousands of colors. • Paint & primer together
The CERTIFIED ASTHMA & ALLERGY FRIENDLY Mark is a Registered Certification Mark of the ASTHMA AND ALLERGY FOUNDATION OF AMERICA and ALLERGY STANDARDS LTD.
Cradle to Cradle Certified™ is a certification mark licensed by the Cradle to Cradle Products Innovation Institute. All other marks are the property of their respective owner.
This product is not endorsed by or a division or affiliate of CHPS. This product is provided by Benjamin Moore, not CHPS.
Benjamin Moore’s Green Promise® designation is our company’s assurance that this product meets – and often exceeds – rigorous
environmental and performance criteria regarding VOCs, emissions, application, washability, scrubbability, and packaging, while also
delivering the premium levels of performance you expect from Benjamin Moore.
*Zero VOC according to EPA Method 24 **According to ASTM Standard Guide D 5116 and CDPH/EHLB/Standard Method V1.1.
14 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Premium Interior
Benjamin Moore®
BENJAMINMOORE.COM
Regal Select offers the premium performance and smooth application you’ve come to expect from our
classic paint, with the added benefits of our proprietary Gennex colorant system, and formulated for
easy cleaning.
Key Advantages:
A trusted brand for over 50 years, it applies easily and smoothly for beautiful results every time.
Delivers a durable, uniform finish that can stand up to the abuse of everyday life.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
0547 Regal® Select Waterborne White 1-4 40.1% 1-2 hrs. 400-450 1.5 0 Qualifies for LEED® v4 Credit; MPI 53, 53 X-Green™, 143,
Interior Flat Finish 143 X-Green™, Qualifies for CHPS low emitting credit
0548 Regal® Select Waterborne White 1-4 42.9% 1-2 hrs. 400-450 1.6 0 Qualifies for LEED® v4 Credit; MPI 53, 53 X-Green™, 143,
Interior Matte Finish 143 X-Green™, Qualifies for CHPS low emitting credit
Qualifies for LEED® v4 Credit; MPI 44, 44 X-Green™,
0549 Regal® Select Waterborne White 1-4 40.9% 1-2 hrs. 400-450 1.5 0 High Performance 138, 138-X Green, 144, 144 X-Green™,
Interior Eggshell Finish Qualifies for CHPS low emitting credit
Qualifies for LEED® v4 Credit; MPI 43, 43 X-Green™;
0550 Regal® Select Waterborne White 1-4 40.5% 1-2 hrs. 400-450 1.5 0 High Performance 140, 140 X-Green™,
Interior Pearl Finish Qualifies for CHPS low emitting credit
Qualifies for LEED® v4 Credit; MPI 54, 54 X-Green™,
0551 Regal® Select Waterborne White 1-4 39.9% 3 hrs. 400-450 1.5 0 MPI HP 141, 141 X-Green™, 147, 147 X-Green™,
Interior Semi-Gloss Finish Qualifies for CHPS low emitting credit
Benjamin Moore’s Green Promise® designation is our company’s assurance that this product meets – and often exceeds – rigorous
environmental and performance criteria regarding VOCs, emissions, application, washability, scrubbability, and packaging, while also
delivering the premium levels of performance you expect from Benjamin Moore.
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 15
†For the most up-to-date MPI specifications, visit www.mpi.net
Premium Interior
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
MPI 50,
N216 Regal® Classic Premium Interior Primer White Deep 26.0% 1 hr. 400-500 0.9 68 Qualifies for LEED® Credit
White,
N215 Regal® Classic Premium Interior Flat Finish Colors 1-4 35.0% 1-2 hrs. 400-450 1.3 87 MPI 53
White,
N221 Regal® Classic Premium Interior Matte Finish Colors 1-4 39.0% 1-2 hrs. 400-450 1.5 92 MPI 53
N310: A premium quality 100% acrylic pearl finish that • U ses Advanced Particle Technology, featuring our proprietary 100% acrylic resin Do not apply when air and
combines high durability with low gloss to provide an elegant • D urable; withstands repeated washings surface temperatures are below
look on walls, ceilings, trim, doors and cabinets. Ideal for areas • M ildew resistant 50°F (10°C).
• E asy durability and easy application
where a durable film is required as it can withstand repeated • S atin-like wall finish is great for trim, doors, cabinets or walls
washings and scrubbings.
N333: A premium quality, 100% acrylic semi-gloss finish that is • U ses Advanced Particle Technology, featuring our proprietary 100% acrylic resin Do not apply when air and
washable and scrubbable. Ideal for interior trim, doors, cabinets, • D urable; withstands repeated washings surface temperatures are below
walls and ceilings. For new or previously painted wallboard, plaster, • Mildew resistant 50°F (10°C).
• R ecommended especially for trim, doors, cabinets or walls
masonry and primed or previously painted wood and metal. • Ideal for kitchens and baths
16 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Premium Interior
Benjamin Moore®
BENJAMINMOORE.COM
ben is an acrylic blended interior coating that delivers excellent application properties which makes it a
user-friendly paint that puts premium color within reach. It has zero VOCs* and low odor for same day
return to service.
Key Advantages:
ben offers easy application with great touch-ups. It is the perfect choice for novice painters who want an
introduction into the world of premium paints.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
W625 ben® Waterborne Interior White 1-4 31.5% 1-2 hrs. 400-450 1.2 0 Qualifies for LEED® v4 Credit; MPI 53, 53 X-Green™,
Flat Finish Qualifies for CHPS low emitting credit
W626 ben® Waterborne Interior White 1-4 35.0% 4 hrs. 400-450 1.3 0 Qualifies for LEED® v4 Credit; MPI 44, 44 X-Green™,
Eggshell Finish Qualifies for CHPS low emitting credit
W627 ben® Waterborne Interior White 1-4 39.0% 4 hrs. 400-450 1.5 0 Qualifies for LEED® v4 Credit;
Semi-Gloss Finish Qualifies for CHPS low emitting credit
W625, W626, W627: A premium quality paint that features easy • Easy Application Do not apply when air and surface
application for beautiful transformations. Low odor, quick dry and soap • Delivers a Smooth Finish with Great Touch-Up Characteristics temperatures are below 50°F (10°C).
and water clean up. Available in thousands of colors all tinted on our • Quick Drying
• Spatter Resistant with Easy Clean Up
proprietary Gennex® colorant system. • Paint & Primer Together - Saves time
• Zero VOC* and Low Odor - Can be used in areas where odor
is a concern
Benjamin Moore’s Green Promise® designation is our company’s assurance that this product meets – and often exceeds – rigorous
environmental and performance criteria regarding VOCs, emissions, application, washability, scrubbability, and packaging, while also
delivering the premium levels of performance you expect from Benjamin Moore.
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 17
†For the most up-to-date MPI specifications, visit www.mpi.net
Premium Interior
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Qualifies for LEED® v4 Credit,
0790 ADVANCE® Primer White NA 41.5% 8 hrs. 400-500 1.5 48 MPI 172, 172 X-Green™,
Qualifies for CHPS low emitting credit
White, Qualifies for LEED® v4 Credit, MPI 165,
0791 ADVANCE® Matte Black
1-4 49.0% 16 hrs. 400-500 1.7 46 Qualifies for CHPS low emitting credit
White, Qualifies for LEED® v4 Credit,
0792 ADVANCE® Satin Black
1-4 39.0% 16 hrs. 400-500 1.35 48 Qualifies for CHPS low emitting credit
White,
0793 ADVANCE® Semi-Gloss Black
1-4 37.1% 16 hrs. 400-500 1.3 48 Qualifies for LEED® Credit
White,
N794 ADVANCE® High Gloss Black
1-4 42.0% 16 hrs. 400-500 1.5 46 Qualifies for LEED® Credit, MPI 157
0790: A premium quality waterborne alkyd primer formulated primarily • Water Dispersable Alkyd Technology - Applies like a conventional Do not apply when temperatures
to provide a sealed and sandable surface for ADVANCE® waterborne alkyd alkyd paint with easy soap and water clean-up are below 50°F (10°C)
topcoats. • Exceptional Flow and Leveling - Outstanding surface smoothness
• Excellent Adhesion - Can be used over hard-to-coat surfaces
• Stain Blocking - Helps finish coat look smooth with no bleed
through
0791: A premium-quality waterborne alkyd that delivers a matte finish • Water Dispersable Alkyd Technology - Applies like a conventional Do not apply when temperatures
that provides the desired flow and leveling characteristics of a conventional alkyd paint with easy soap and water clean-up are below 50°F (10°C)
alkyd. It delivers a sophisticated matte finish ideal for interior walls and • Exceptional Flow & Leveling - Outstanding surface smoothness
• Extended Open Time - Ensures minimal brush marks
residential high-end woodwork. • Low VOCs, Even After Tinting - Lower odor than typical alkyds
• Durable Finish - Delivers a lasting finish
0792: A premium quality waterborne alkyd satin finish that provides the • Water Dispersable Alkyd Technology - Applies like a conventional Do not apply when temperatures
desired flow and leveling characteristics of a conventional alkyd. It delivers alkyd paint with easy soap and water clean-up are below 50°F (10°C)
a durable, smooth satin finish similar to that of a hand rubber lacquer that • Exceptional Flow & Leveling - Outstanding surface smoothness
• Extended Open Time - Ensures minimal brush marks
stands up to repeated washing. • Low VOCs, Even After Tinting - Lower odor than typical alkyds
• Durable Finish - Delivers a lasting finish
0793: A premium quality waterborne alkyd semi-gloss finish that • Water Dispersable Alkyd Technology - Applies like a conventional Do not apply when temperatures
provides the desired flow and leveling characteristics of a conventional alkyd paint with easy soap and water clean-up are below 50°F (10°C)
alkyd. It provides a durable, semi-gloss finish that stands up to repeated • Exceptional Flow and Leveling - Outstanding surface smoothness
• Extended Open Time - Ensures minimal brush marks
washing. • Low VOCs, Even After Tinting - Lower odor than typical alkyds
• Durable Finish - Delivers a lasting finish
N794: A premium quality interior/exterior waterborne alkyd high gloss • Water Dispersable Alkyd Technology - Applies like a conventional Do not apply when temperatures
enamel. It provides a durable, tough high gloss finish that stands up to alkyd paint with easy soap and water clean-up are below 50°F (10°C)
repeated washing. • Exceptional Flow and Leveling - Outstanding surface smoothness
• Extended Open Time - Ensures minimal brush marks
• Low VOCs, Even After Tinting - Lower odor than typical alkyds
• Durable Finish - Delivers a lasting finish
18 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Ceiling Paints
Benjamin Moore®
BENJAMINMOORE.COM
Waterborne Ceiling Paint hides common ceiling imperfections for a look that is virtually flawless.
It delivers ample open time to ensure minimal lapping and has minimal spatter. It is the flattest finish
offered by Benjamin Moore.
Key Advantages:
Specifically formulated for ceilings with a unique ultra-flat finish and available in thousands of colors.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Qualifies for LEED® v4 Credit,
0508 Waterborne Ceiling Paint White 1-4 36.5% 1-2 hrs. 400-450 1.4 0 Qualifies for CHPS low emitting credit
0508: Specifically formulated for ceilings, Waterborne Ceiling Paint is • Ultra Flat Finish - Hides common ceiling imperfections Do not apply when air and surface
ultra flat – the flattest finish we offer – hiding common imperfections • Ample Open Time - Ensures minimal lap marks temperatures are below 50°F
for a look that is virtually flawless. It provides ample open time to ensure • Available in Four Bases - Can be tinted in thousands of colors (10°C). The ultra flat finish of this
• Easy Application - Resists spattering when applied by roller product means that it is not suitable
minimal lapping, has minimal spatter and dries quickly for fast recoats. • Zero VOC*, Low Odor for surfaces that require cleaning
or are subject to abrasion.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
01 & 04
0258 Moore’s® Muresco® Ceiling Paint White
NA 30.0% 2 hrs. 400-450 1.1 47 Qualifies for LEED® Credit
0258: A premium quality acrylic coating specifically formulated for • Easy Application - Goes on smoothly and resists spattering Do not apply when air and surface
ceilings. Provides a beautiful, uniform flat finish. • Excellent Hide - Hides surface imperfections temperatures are below 50°F
(10°C). The flat finish of this product
means that it is not suitable for
surfaces that require cleaning or
are subject to abrasion.
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 19
†For the most up-to-date MPI specifications, visit www.mpi.net
Floor Paints
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
N122 Floor & Patio Latex Enamel White, 1-4 35.0% 4 hrs. 500-600 1.0 45 Qualifies for LEED® v4 Credit, Qualifies for
Low Sheen Colors CHPS low emitting credit (Floor paint)
0121 Floor & Patio Latex Enamel White, 1-4 40.5% 4 hrs. 600-700 1.0 44 Qualifies for LEED® v4 Credit
High Gloss Colors
N122: A premium quality, quick-drying epoxy-modified acrylic low sheen • Easy Application - Goes on smoothly Where non-skid characteristics are
latex floor enamel that is low odor/low VOC. For interior or exterior use • Durable Finish - Resists marring, scratching and delivers desired, a small amount of Anti-Slip
on unpainted concrete (new or old) and previously finished wood or a lasting finish Aggregate or clean play sand my be
• Low Odor/Low VOC added.
concrete floors. • Interior/Exterior Use - Can be used over multiple substrates
0121: A premium quality, quick-drying, urethane alkyd modified acrylic • Easy Application - Goes on smoothly Where non-skid characteristics are
high gloss latex floor enamel. One coat covers most previously painted • Durable Finish - Resists marring and scratching desired, a small amount of Anti-Slip
surfaces that are in fair to good condition. and delivers a lasting finish Aggregate or clean play sand my be
• Low Odor/Low VOC added.
• Interior/Exterior Use - Can be used over multiple substrates
20 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Interior Clear Finishes
Benjamin Moore®
BENJAMINMOORE.COM
Stays Clear is a premium quality coating that combines the attributes of acrylic and polyurethane
resins to produce a durable, clear finish that dries quickly with very little odor.
Key Advantages:
Stays Clear offers superior durability, easy application and does not yellow over time.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
N425 Benwood® Stays Clear® Acrylic Clear NA 32.7% 2-3 hrs. 350-450 1.3 269 Qualifies for LEED® v4 Credit,
Polyurethane, Flat Qualifies for CHPS low emitting credit
N423 Benwood® Stays Clear® Acrylic Clear NA 36.0% 2-3 hrs. 350-450 1.4 239 MPI 121, Qualifies for LEED® v4 Credit,
Polyurethane, Low Lustre Qualifies for CHPS low emitting credit
N423: A product that combines the attributes of acrylic and • Durable Finish - Excellent scratch and chemical resistance Do not apply when air and surface
polyurethane resins to produce a clear low lustre finish that dries quickly • Quick Drying - Saves time temperatures are below 50°F (10°C).
with very little odor. Provides excellent resistance to damage caused by • Easy Application - Goes on smoothly
• Low Odor - Can be used in areas where odor is a concern
abrasion, household chemicals and water, alcohol or food stains. For use • Soap and water cleanup
on new or previously painted, stained or varnished interior wood surfaces,
including floors.
N422: A product that combines the attributes of acrylic and • Durable Finish - Excellent scratch and chemical resistance Do not apply when temperatures
polyurethane resins to produce a clear gloss finish that dries quickly • Easy Application - Goes on smoothly are below 50°F (10°C).
with very little odor. Provides excellent resistance to damage caused by • Low Odor - Can be used in areas where odor is a concern
• Quick Drying - Saves time
abrasion, household chemicals and water, alcohol or food stains. For use • Soap and water cleanup
on new or previously painted, stained or varnished interior wood surfaces,
including floors.
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 21
†For the most up-to-date MPI specifications, visit www.mpi.net
Specialty Coatings
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
White,
N314 Waterborne Satin Impervo® White 1-2 40.0% 8 hrs. 400-450 1.5 145 MPI 43
Dove
N314: A premium quality, 100% acrylic latex paint that delivers the • Easy Application - Goes on smoothly for a uniform finish Do not apply when temperatures
desired flow and leveling characteristics of an alkyd based paint. It provides • Minimal Yellowing - Unlike conventional alkyd enamels are below 50°F (10°C).
a tough, high hiding, low lustre finish that stands up to repeated washing • Spatter Resistant - Minimal cleanup
• Excellent Hide - Hides surface imperfections
and scrubbing.
Satin Impervo
A premium quality, low lustre alkyd paint providing superb leveling and hiding qualities. Features easy
application, excellent sag resistance and provides one-coat coverage if the surface is in good condition
and the color change is not extreme.
Key Advantages:
A premium quality alkyd satin paint that is easy to apply with excellent sag resistance; clings to sharp
edges and corners. A painter favorite for over 50 years.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
White,
C235 Satin Impervo® Colors
1-4 52.0% Overnight 500-550 1.3 366
C235: A premium quality, low lustre alkyd paint featuring superb leveling • Excellent Sag Resistance - Easy application with brush, Do not apply when temperatures
and hiding qualities. Features easy application, excellent sag resistance and roller or sprayer are below 50°F (10°C).
provides one-coat coverage if the surface is in good condition and the color • One-Coat Coverage - Complete jobs quicker
• Durable Finish - Cures to a hard durable finish
change is not extreme.
22 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
®
Specialty Coatings
Benjamin Moore®
BENJAMINMOORE.COM
A quick-drying, interior/exterior, high gloss latex enamel that washes easily and produces no unpleasant
odor during application.
Key Advantages:
Provides outstanding rust inhibition with excellent color retention and weather resistance.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
W309 Impervex® High Gloss White, 1-4 36.0% 3 hrs. 400-450 1.4 48 Qualifies for LEED® v4 Credit, Qualifies for CHPS
Enamel Black low emitting credit, MPI 114, 114 X-Green™
W309: Quick-drying, interior/exterior, high gloss enamel providing • Excellent Adhesion - Allows hard to stick surfaces to be painted Do not apply when temperatures
outstanding rust inhibition with excellent color retention and weather • Durable Finish - Resists marring and scratching and delivers are below 50°F (10°C).
resistance. Washes easily and produces no unpleasant odor during a lasting finish Do not use on floors, exterior wood
application. siding or bare exterior wood trim.
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 23
†For the most up-to-date MPI specifications, visit www.mpi.net
Specialty Coatings
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
W322 Kitchen and Bath Satin Finish White 1-4 34.7% 4 hrs. 400-450 1.3 37 Qualifies for LEED® Credit
W322: A premium quality finish that is resistant to steam and moisture • Easy Application - Goes on smoothly Do not apply when air and surface
which makes it ideal for kitchens and bathrooms. • Mildew Resistant - Inhibits the growth of mold and mildew temperatures are below 50°F (10°C).
on the surface of the paint film
• Low VOC
• Durable Finish - Long-term durability
24 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Specialty Coatings
Studio Finishes
Benjamin Moore®
BENJAMINMOORE.COM
The Benjamin Moore Studio Finishes line is comprised of decorative coatings designed for unique
effects or faux finishes. You can choose from a variety of these specialty products to achieve dramatic
effects in lustre and texture.
Key Advantages:
Premium quality finishes that offer easy application and beautiful results.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Pearlescent
0620 Latex Metallic Glaze White, Colors
Pearlescent 39.2% 24 hrs. 500-600 1.1 288
0311 Latex Glitter Effect Clear NA 30.0% 2-3 hrs. 100-110 1.1 118
0409: A quality alkyd glaze formulated for producing unique effects and adding • Can be applied over latex and oil-based coatings
• Can be intermixed with Benjamin Moore colorants, stains or oil-based
Do not apply when air and surface temperature
are below 50°F (10°C). All alkyd-based enamels
depth to all types of specialty finish projections. For interior surfaces of wood, wallboard,
cured plaster and metal; use on previously painted furniture, trim, walls, and ceilings. paints experience a certain amount of yellowing. If this
• Washable finish will produce an unwanted result, then use Studio
• Creates an infinite variety of designs and effects on interior surfaces Finishes® Latex Glaze (N405) for your project.
0408: This latex glaze extender is designed to increase the open time of glaze/ • Simple clean-up with soap and water
• Will not alter color/hue in a glaze
Do not apply when air and surface temperatures
are below 50°F (10°C). For best results over
paint mixtures to allow the artisan to create dramatic advanced techniques. For use with
Benjamin Moore® latex paints and glazes on new and previously painted furniture, trim, • Adds increased open time and depth to specialty finish projects alkyd-based paints or enamels, use Studio Finishes
walls and ceilings; recommended for interior surfaces of wood, cured plaster, wallboard Alkyd Glaze (409).
and masonry.
0620: An acrylic-based glaze designed to produce beautiful metallic special effects. For interior • Dries quickly to a glimmering, translucent metallic lustre
• Easy to apply
May have water sensitivity if used by itself
in high moisture areas. Do not apply when air
use on previously painted surfaces, including ceilings, walls and trim. Use wherever a metallic finish
is desired. • Resists spattering and surface temperatures are below 50°F (10°C).
0621: An alkyd high gloss hammered metal effect product. It is designed to produce a • Deep rich high gloss finish
• Hard durable finish
Do not apply when air and surface temperatures
are below 50°F (10°C). Two thin coats required for
beautiful deep gloss metallic special effect. Ideal for new and previously painted furniture,
decorative pieces, trim, accent walls, and ceilings. • It offers superior rust inhibition on exterior surfaces complete coverage. Available in quarts and pints
only. Do not apply to bare galvanized metal or
aluminum.
0386: A ready mixed, sand texture finish that offers the opportunity to create an infinite variety • Offers added benefit of hiding small cracks and minor imperfections Do not apply when air and surface temperatures
are below 50°F (10°C).
of designs, or decorative personalized effects on walls or ceilings. For use on primed or previously
painted wallboard, plaster and wood; new or previously painted concrete or block construction.
0307: This acrylic-based coating turns virtually any interior surface into a black • Goes on easily and is washable
• Dries to a decorative finish that is extremely durable
Do not apply when air and surface temperatures
are below 50°F (10°C).
chalkboard. For interior use on previously painted surfaces. Use wherever a chalkboard finish
is desired. • Quick drying
0311: A clear, low lustre topcoat that adds a whimsical, iridescent sparkle to any • Formulated to minimize lingering odors
• Goes on easily and is washable
Do not apply when air and surface temperatures
are below 50°F (10°C).
paintable surface or room in your home. For interior use on previously painted surfaces,
including ceilings, walls, trim and furniture. • Dries to a decorative finish that is durable
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 25
†For the most up-to-date MPI specifications, visit www.mpi.net
Premium Exterior
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
0629 Aura® Waterborne Exterior White 1-4 46.0% 4 hrs. 250-350 2.1-2.9 47 MPI 10
Flat Finish
0634 Aura® Waterborne Exterior White 1-4 44.0% 4 hrs. 250-350 2.0-2.8 48 MPI 15, 315
Low Lustre Finish
0631 Aura® Waterborne Exterior White 1-4 40.4% 4 hrs. 250-350 1.9-2.6 45
Satin Finish
0632 Aura® Waterborne Exterior White 1-4 38.0% 4 hrs. 350-450 1.4-1.7 49
Semi-Gloss Finish
0521: A 100% acrylic latex product intended to be used as a base • Extreme Hide - Fewer coats The use of Red or Yellow Color Foundation
coat under certain bright and transparent yellows and reds in order to • Easy Application - Goes on smoothly will depend on the finish coat color and
achieve the desired finish coat color. • Quick Drying - Saves time must be tinted appropriately.
0629, 0634, 0631, 0632: A super premium 100% acrylic exterior • P roprietary Color Lock® technology for richer colors and superior Do not apply when air and surface
coating formulated using our proprietary Color Lock® technology for fade resistance temperatures are below 40°F (4.4°C).
richer colors and superior color fade resistance. Aura Exterior is available • H igh build formula provides extreme hide and coverage for fewer coats The flat, low lustre, and satin is for
• Outstanding durability against even the harshest weather conditions wind driven rain over smooth
in a wide variety of finishes and in thousands of colors all tinted on our • Lifetime Limited Warranty and stable masonry only
proprietary Gennex® colorant system. • Low-temperature application to extend the painting season (non-elastomeric use). Follow
• Superior adhesion primer/finish instructions.
• Fast drying and quick re-coat times
• Mildew resistant
• Self-priming in most situations
• Lifetime Limited Warranty
26 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Premium Exterior
Benjamin Moore®
BENJAMINMOORE.COM
Regal Select Exterior features MoorLife , MoorGard and MoorGlo finishes tinted on our proprietary
Gennex colorant system. It is formulated with proprietary alkyd technology to provide a protective
exterior coating and superior adhesion.
Key Advantages:
100% acrylic fortified with advanced alkyd technology for superior adhesion, especially
to chalky substrates.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
W105 Regal® Select Exterior MoorLife® White 1-4 42.0% 4 hrs. 300-400 1.9 44 MPI 10
Flat Finish
W103 Regal® Select Exterior MoorGard® White, 1-4 43.0% 4 hrs. 300-400 2.0 36 MPI 214
Low Lustre Finish Black
W096 Regal® Select Exterior MoorGlo® White, 1-4 42.0% 4 hrs. 450-500 1.4 42
Soft-Gloss Finish Black
W105, W103, W096: A premium, 100% acrylic fortified coating with • Advanced Alkyd Technology - Superior adhesion Do not apply when temperatures
advanced alkyd technology for superior adhesion, especially to chalky • Ample Open Time - Ensures minimal lap marks are below 40°F (4.4°C).
substrates. It delivers superior durability and is resistant to fading, cracking • Durable Finish - Resists fading, cracking and peeling
• Excellent Flow & Leveling - Outstanding surface smoothness
and peeling. and easy application
• Can Be Applied Down to 40°F - Extends the painting season
• Lifetime Limited Warranty
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 27
†For the most up-to-date MPI specifications, visit www.mpi.net
Premium Exterior
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
N400 Regal® Select Exterior High-Build White 1-4 44.4% 4 hrs. 250-350 2.3 42 MPI 10
Flat Finish
N401 Regal® Select Exterior High-Build White 1-4 43.0% 4 hrs. 250-350 2.3 40 MPI 15, 315
Low Lustre Finish
N403 Regal® Select Exterior High-Build White 1-4 40.5% 4 hrs. 275-375 2.0 43 MPI 11
Soft-Gloss Finish
28 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Premium Exterior
Benjamin Moore®
BENJAMINMOORE.COM
Regal Select Exterior REVIVE is a premium exterior coating specifically formulated for optimal
performance on vinyl siding and trim, including PVC. With the added benefits of Vinyl Lock technology
and a proprietary fortified acrylic resin, it delivers superior adhesion and excellent flow and leveling. It
also fully covers the previous color or faded areas on weathered vinyl.
Key Advantages:
Engineered with the added benefits of Vinyl Lock technology and a proprietary fortified acrylic resin
to deliver superior adhesion and durability.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
41.2-
0544 Regal® Select Exterior REVIVE® NA 1-4
45.2%
4 hrs. 350-450 1.7 36
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 29
†For the most up-to-date MPI specifications, visit www.mpi.net
Premium Exterior
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
0541 ben® Waterborne Exterior White 1-4 34.5% 4 hrs. 350-475 1.3 44 MPI 10
Flat Finish
0542 ben® Waterborne Exterior White 1-4 33.3% 4 hrs. 350-475 1.3 43 MPI 15
Low Lustre Finish
0543 ben® Waterborne Exterior White 1-4 35.2% 4 hrs. 350-475 1.3 45 MPI 11
Soft-Gloss Finish
0541, 0542, 0543: A premium quality, 100% acrylic latex finish that • Exceptional Flow and Leveling - Easy application Do not apply when temperatures
features easy application, great coverage and durability. Recommended • Can Be Applied Down to 40°F - Extends the painting season are below 40°F (4.4°C).
for exterior surfaces such as new or previously painted wood, hardboard • Great Coverage and Durability
• 25 Year Warranty*
siding, cured masonry and unglazed brick.
30 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
®
®
Premium Interior/Exterior
Benjamin Moore®
BENJAMINMOORE.COM
Aura Grand Entrance brings rich, vivid color and exceptional durability to interior/exterior door & trim.
Specially formulated to retain color integrity and gloss, this enamel is easy to apply, has excellent hide
and is available in thousands of colors.
Key Advantages:
The urethane-modified, waterborne alkyd technology allows for easier application and durability — it will
retain its gloss and color for years.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
0147 Aura® Grand Entrance® Satin Finish White 1-4 40.0% 24 hrs. 100-125 1.4 48 Qualifies for LEED® Credit
0148 Aura® Grand Entrance® High Gloss White 1-4 42.0% 24 hrs. 100-125 1.5 46 Qualifies for LEED® Credit
Finish
0147, 0148: A super premium waterborne alkyd enamel that delivers • Rich, lustrous finish • Do not apply when temperatures are
brilliant, rich colors and outstanding durability. Aura Grand Entrance is • Excellent color retention and fade resistance below 50°F (10°C).
available in Satin and Semi-Gloss finishes and is available in thousands of • Easy, smooth application • Available in quarts only.
• For interior and exterior use • Should not be used on exterior soft or
colors. • Lifetime Limited Warranty* flexible substrates.
• Two coats required for ultimate
sheen and durability.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Qualifies for LEED® v4 Credit,
0308 ben® Chalkboard Paint NA 1-4 40.0% 4 hrs. 100-110 1.5 0 Qualifies for CHPS low emitting credit
0308: Chalkboard paint, available in any color, is acrylic based and turns • Available in Four Bases - Interior surfaces can be converted into Do not apply when air and surface
virtually any interior surface into a chalkboard. erasable, washable chalkboard in thousands of colors temperatures are below 50°F (10°C).
• Zero VOC*
• Durable Finish - Can withstand repeated washing
• Quick Drying - Saves time
• Easy Application - Resists spattering during application
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 31
†For the most up-to-date MPI specifications, visit www.mpi.net
Advanced Waterborne Stain
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
W623 ARBORCOAT® Translucent Deck Colors NA 27.9% 1-3 hrs. 200-400 Minimal 50 MPI 33
& Siding Stain
Tint Base,
N638 ARBORCOAT® Semi-Transparent NA Yellow 26.0% 1-3 hrs. 200-400 Minimal 18 MPI 156
Deck & Siding Stain Red
W623: A premium quality, waterborne translucent stain that allows all • Easy Application - Goes on smoothly
• Durable Finish - Guards against even the harshest weather conditions
Do not apply when temperatures are below
40°F (4.4°C). Moisture content of wood
the natural beauty of the wood grain and texture to show through. Formulated using a
100% acrylic resin, it penetrates deep into the wood. Available in six ready made colors. • Superior UV Protection - Resists stains and scuffs substrate must be below 15%. Do not apply
at a rate less than 200 sq. ft. per gallon.
N638: A premium quality, waterborne alkyd/acrylic semi-transparent stain that • Easy Application - Goes on smoothly
• Durable Finish - Guards against even the harshest weather conditions
Do not apply when temperatures are below
40°F (4.4°C). Moisture content of wood
enhances the beauty of the wood with color, while allowing the grain and texture of
the wood to show through. It is formulated to penetrate, protect and beautify wood • Superior UV Protection - Resists stains and scuffs substrate must be below 15%. Do not apply
decking, siding, fencing, shingles and furniture. Available in 75 colors that may also be at a rate less than 200 sq. ft. per gallon.
top coated with the protective clear coat (0636) as an annual refresh system. Not recommended for hardwood.
0639: A premium quality, 100% acrylic waterborne semi solid stain that enhances • Easy Application - Goes on smoothly
• Durable Finish - Guards against even the harshest weather conditions
Do not apply when temperatures are below
40°F (4.4°C). Moisture content of wood
the beauty of the wood with color, while allowing some of the grain and texture of the
wood to show through. It is formulated to penetrate and protect wood, resist abrasion • Superior UV Protection - Resists stains and scuffs substrate must be below 15%. Not
and beautify wood decking, siding, fencing, shakes and furniture. Available in 75 colors recommended for hardwood.
tinted on our proprietary Gennex colorant system.
0610: A premium quality, waterborne ultra flat solid stain that stands up to • Easy Application – Goes on smoothly
• Durable Finish – Guards against even the harshest weather conditions
Do not apply when temperatures are below 40°F
(4.4°C). Moisture content of wood substrate must
the harshest weather conditions. It is formulated to minimize imperfections and
reflectivity while allowing the grain and texture of wood to show through. Available in • Superior UV protection – Resists stains and scuffs be below 15%. May not be used as a deck stain.
any color. For use on siding or other vertical surfaces only. Do not use on decks.
0640: A premium quality, 100% acrylic waterborne solid stain that allows the • Easy Application - Goes on smoothly
• Durable Finish - Guards against even the harshest weather conditions
Do not apply when temperatures are below
40°F (4.4°C). Moisture content of wood substrate
texture of the wood to show through. It has been formulated to protect and beautify
all types of wood decks including cedar, redwood and pressure treated lumber. • Superior UV Protection - Resists stains and scuffs must be below 15%. When used as a deck stain,
Available in any color and great for coating composite decking. allow to dry for 48 hours before putting furniture
back on decks and returning to service.
0320: Waterproofer (0320) is a water-based sealer that provides excellent • Quick Drying
• Easy Application
Do not apply when air and surface
temperatures are below 50°F (10°C).
protection from moisture and sun damage on exterior wood decking, siding, fencing,
shingles and furniture. Ideal for protecting all types of wood from water and sun • Resists Dirt Pick Up
damage, as well as stains from grease, oil, dirt and mildew.
32 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Classic Oil Finishes
Benjamin Moore®
BENJAMINMOORE.COM
ARBORCOAT , with advanced alkyd technology, is easy to apply and offers superior protection
while enhancing the texture and grain of exterior wood surfaces. It’s available in an array of
captivating colors that let you express your own unique style.
Key Advantages:
ARBORCOAT Classic Oil Finishes are designed for deep penetration in hard and soft woods to
protect and enhance the appearance of your deck, siding or outdoor wood furniture. All finishes
provide a durable, mildew resistant coating. ARBORCOAT Oil Primer is a quick dry primer with
excellent adhesion and stain blocking properties that seal porous surfaces, providing better
uniformity of the topcoat.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
0326/C326: A premium quality coating specifically designed to enrich • Provides protection and color without obscuring the grain Do not apply when air and surface
the beauty of woods like mahogany, teak and ipe. This durable finish or texture of the wood temperatures are below 50°F (10°C). Not
enhances the look of hardwoods, while offering great protection from • Formulated to resist mildew growth on the stain film recommended for use on previously
• Designed to enrich hardwoods like mahogany, teak and ipe painted surfaces or substrates coated with
water and sun damage. May also be used on traditional woods like pine,
cedar and redwood. solid color stains unless previous coating
has been completely removed.
0328/C328: A premium quality semi-transparent stain formulated to • Superior color retention and durability Not recommended for use on previously
penetrate and protect wood, resist abrasion and beautify wood decking, • Ideal for all wood types on decks, siding or fences painted surfaces or substrates coated with
siding, fencing, shakes and furniture. This deeply penetrating formula offers • A scuff resistant and water repellent stain solid color stains unless previous coating
great protection from water, sun and mildew. Allows the texture has been completely removed.
and grain of the wood to show through.
0329/C329: A premium quality semi-solid stain formulated to penetrate • Provides excellent durability and UV protection Not recommended for use on previously
and protect wood, resist abrasion and beautify wood decking, siding, fencing, • Ideal for protecting and beautifying new or previously painted surfaces or substrates coated with
shakes and furniture. Semi-Solid stain uses the maximum amount of pigment stained wood solid color stains unless previous coating
• A scuff resistant and water repellent stain has been completely removed.
without completely obscuring the grain and texture of the wood.
0366: A premium quality exterior oil primer. Excellent hiding properties • Seals uniformly Do not apply when air and surface
and ideal for blocking tannins in extractive woods like redwood and cedar. • Exhibits excellent adhesion characteristics temperatures are below 50°F (10°C).
Provides a uniform surface over which the finish stain or paint performs best. • Quick drying with excellent hiding properties
• Available in light to medium toned colors
Seals porous surfaces and improves the bond over prepared chalky surfaces.
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 33
†For the most up-to-date MPI specifications, visit www.mpi.net
Prep Products
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC*gm./l. Specifications†
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1600-2400 Max Mixing Ratio (7:1), Mix 1 gallon of
N318
N318 Multi-Purpose
Multi-Purpose Cleaner
Cleaner
NA
NA
NA
NA
NA
NA
NA
NA 1600-2400
Diluted
NA
NA
Exempt
NA
Max Mixing Ratio (7:1), Mix 1 gallon of
CLEAN with 7 gallons of water
Diluted CLEAN with 7 gallons of water
1600-2400
1600-2400 Max
MaxMixing
MixingRatio
Ratio(7:1),
(7:1), Mix
Mix 11 gallon
gallonofof
0317
0317 Brightener
Brightener and
and Neutralizer
Neutralizer NA
NA NA
NA NA
NA NA
NA NA
NA Exempt
NA BRIGHTEN
Diluted
Diluted BRIGHTENwith
with77gallons
gallons of water
of water
1600-2400
1600-2400 MaxMaxMixing
MixingRatio
Ratio(7:1),
(7:1),Mix
Mix 11 gallon
gallon ofof
N316 Restore NA
NA NA
NA NA
NA NA
NA Diluted
Diluted
NA
NA Exempt
NA RESTORE
RESTOREwith
with77gallons
gallons of
of water
water
500-1000
500-1000 MaxMaxMixing
MixingRatio
Ratio(4:1),
(4:1),Mix
Mix 11 gallon
gallon ofof
0315 Remove NA
NA NA
NA NA
NA NA
NA Diluted
Diluted
NA
NA Exempt
NA REMOVE
REMOVEwith
with44gallons
gallons of
of water
water
400-650
400-650
0313 Composite Deck Cleaner NA
NA NA
NA NA
NA NA
NA Diluted
Diluted
NA
NA 0NA See
SeeTDS
TDSfor
formix
mixratios
ratios
*Applicable State or Federal VOC limit for this class of product; contact Benjamin Moore & Co. for actual levels, which may or may not be substantially less than stated.
32
34 Please note
Please note that
that not
not all
all Benjamin
Benjamin Moore
Moore && Co.
Co. products
products are
are available
available in
in all
all areas
areas due
due to
to VOC
VOC regulations.
regulations. Please
Please check
check with
with your
your local
local retailer
retailer before
before making
making your
your selection.
selection.
†For the
†For the most
most up-to-date
up-to-date MPIMPI specifications,
specifications, visit
visit www.mpi.net
www.mpi.net
Extender
Benjamin Moore®
BENJAMINMOORE.COM
A premium waterborne extender for Benjamin Moore waterborne premium paints. Use as a thinner
and open time extender for all Benjamin Moore interior or exterior latex paints when application
conditions require it.
Key Advantages:
Specially formulated to enhance the application properties of our premium products without adverse
effects on dry film properties.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
518: A premium waterborne extender for Benjamin Moore® waterborne • Proprietary 100% Acrylic Do not apply when air and surface
premium paints. Use as a thinner and open time extender for all • Low VOC temperatures are below 40°F (10°C).
Benjamin Moore® interior or exterior latex paints when application • Low Odor
• For Interior/Exterior Products
conditions require it.
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 35
†For the most up-to-date MPI specifications, visit www.mpi.net
Benjamin Moore Professional
& Commercial Products
Benjamin Moore Professional
& Commercial Products
A complete assortment of Benjamin Moore -branded commercial products designed to create
a business solution for the professional contractor and retailer to help aggressively pursue
commercial jobs at a more competitive price. All products under this line can be tinted with
Gennex colorants and are less than 50 g/L VOC.
Key Advantages:
Complete assortment of competitive Benjamin Moore -branded commercial architectural offering
that is tinted on the Gennex platform.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
0244 Benjamin Moore® Block Filler White NA 51.0% 2-3 hrs. 75-100 8.2-10.9 35 Qualifies for LEED® v4 Credit
0396 Benjamin Moore® Dry Fall Latex White 1 31.0% 2 hrs. 375-475 1.2 43 Qualifies for LEED® v4 Credit, MPI 155,
Eggshell Qualifies for CHPS low emitting credit
0397 Benjamin Moore® Dry Fall Latex White 1 38.0% 4 hrs. 375-475 1.4 43 Qualifies for LEED® v4 Credit, MPI 226,
Semi-Gloss Qualifies for CHPS low emitting credit
0343 Benjamin Moore® Acrylic White NA 47.0% 4-6 hrs. 100-200 5 46 Qualifies for LEED® v4 Credit,
Knockdown Flat Qualifies for CHPS low emitting credit
0344 Benjamin Moore® Acrylic White NA 47.0% 4-6 hrs. 100-200 5.1 46 Qualifies for LEED® v4 Credit,
Knockdown Satin Qualifies for CHPS low emitting credit
0395, 0396, 0397: This fast dry interior latex is designed to provide superior • Overspray settles as dry powder (10 ft.)
• Minimal surface preparation
Apply when surface and air temperatures are
between 50ºF (10°C) and 90°F (32.2°C). Spray
hiding and allow for minimal surface preparation. The dry fall qualities of this product
cause the overspray to settle as a dry powder in approximately 10 feet of fall. • Super hiding application only and not for high corrosion or for
• Fast dry for quick recoat high abuse areas.
0343, 0344: A high solids latex coating formulated to create a durable, textured • Durable, textured finish
• Low odor
Do not apply when the surface or air temperatures
are below 50ºF (10°C).
finish that provides a uniform appearance in public, commercial and residential
building. The high solids formula allows the applicator wide altitude in creating many • Qualifies for LEED® v4 Credit
finished effects. Can be tinted with up to 2 oz. per gallon with Benjamin Moore®
Gennex® colorants.
36 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Benjamin Moore Professional
& Commercial Products
Benjamin Moore®
BENJAMINMOORE.COM
Super Hide Zero VOC
Super Hide Zero VOC is a professional-quality interior paint — created specifically to meet the needs
of high volume commercial paint contractors. (Only available to qualified retailers.)
Key Advantages:
A new addition to the Benjamin Moore family of professional products, it offers easy application,
reliable hide, excellent touch-up and is tinted on our patented Gennex colorant system in a
zero VOC* formula.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
0354 Super Hide® Zero VOC White NA 30.0% 2 hrs. 400-450 1.3 0 Qualifies for LEED® v4 Credit,
Interior Primer Qualifies for CHPS low emitting credit
0355 Super Hide® Zero VOC White, 1-3 29.0% 2-3 hrs. 400-450 1.1 0 Qualifies for LEED® v4 Credit, MPI 53, X-Green™ 53,
Interior Flat Colors Qualifies for CHPS low emitting credit
0356 Super Hide® Zero VOC White, 1-3 33.0% 2-3 hrs. 400-450 1.3 0 Qualifies for LEED® v4 Credit, MPI 44, X-Green™ 44,
Interior Low Sheen Colors Qualifies for CHPS low emitting credit
0357 Super Hide® Zero VOC White, 1-3 38.0% 4 hrs. 400-450 1.4 0 Qualifies for LEED® v4 Credit, MPI 52, X-Green™ 52,
Interior Eggshell Colors Qualifies for CHPS low emitting credit
0358 Super Hide® Zero VOC White, 1-3 47.0% 4 hrs. 400-450 1.2 0 Qualifies for LEED® v4 Credit, MPI 43, X-Green™ 43,
Interior Semi-Gloss Colors Qualifies for CHPS low emitting credit
0355, 0356, 0357, 0358: A professional-quality interior waterborne flat • Good hide
• Reliable touch-up
Do not apply when air and surface temperatures
are below 50°F (10°C).
finish tinted with Benjamin Moore®’s proprietary zero VOC* colorants. This waterborne
interior flat provides a decorative flat finish that qualifies for LEED® v4 Credit and is • Spatter resistant
MPI approved. • Zero VOC*
• Quick dry
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 37
†For the most up-to-date MPI specifications, visit www.mpi.net
Professional Primers
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
0253 Super Spec® Latex Enamel White Deep 31.0% 1-2 hrs. 400-500 1.1 55 MPI 50
Undercoater and Primer Sealer
0306 Super Spec® Alkyd Calcimine White 1-2 48.0% 12 hrs. 400-450 1.8 444 MPI 49
Recoater
0253: An acrylic blended latex primer designed for multiple uses. • Ideal for sealing a variety of porous and non-uniform surfaces, Do not apply when air and surface
including wallboard temperatures are below 50°F (10°C)
• Excellent holdout
• Easy to apply with spatter resistant properties
0306: A premium quality, high hiding, alkyd flat paint specifically • Features a uniform, glare-free finish Do not apply when air and surface
designed for recoating surfaces previously painted with calcimine material. • Provides a highly serviceable film temperatures are below 50°F (10°C)
Covers most wall, ceiling and trim surfaces in one coat. • Superior leveling and hiding qualities
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
0176 Super Spec® Exterior Alkyd Primer White NA 56% Overnight 450-550 1.8 345 MPI 5
0176: A premium alkyd based primer designed to seal weathered • High hiding Do not apply when air and surface
surfaces uniformly, ideal for blocking stains and provides a non-gloss • Easy application temperatures are below 50°F (10°C).
film for optimal finish coat performance. • Excellent adhesion Not for interior use
• Exceptional film durability
38 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Professional Interior
Benjamin Moore®
BENJAMINMOORE.COM
A complete line of interior professional products for residential and commercial use.
Key Advantages:
Designed for application to a wide variety of interior surfaces such as trim, walls
and ceilings. Super Spec interior provides excellent hiding and touch up along with easy application.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
C274 Super Spec® Interior Latex White 1-4 31.5% 4 hrs. 400-450 1.2 104
Eggshell Finish
0275 Super Spec® Interior Latex White 1-4 32.0% 2-3 hrs. 400-450 1.2 46
Flat Finish
0276 Super Spec® Interior Latex White 1-4 31.0% 4 hrs. 400-450 1.2 113
Semi-Gloss Finish
0277 Super Spec® Interior Latex White 1-4 33.0% 4 hrs. 400-450 1.2 138
Pearl Finish
0281 Super Spec® Interior 100% White 1-4 28.0% 4 hrs. 400-450 1.1 129
Acrylic Semi-Gloss Enamel
C271 Super Spec® Alkyd Semi-Gloss White 1-4 51.0% 16 hrs. 450-500 1.6-1.8 372 MPI 47
Enamel
C274: An acrylic-blended latex eggshell finish designed for application • Excellent Hide - Covers stains and imperfections
to a wide variety of interior surfaces such as trim, walls and ceilings. This • Touch Ups - Will not be visible, enabling professional painters
highly durable, low sheen finish has excellent hiding and touch up along to move on to the next job
• Spatter Resistant - Minimal clean up
with easy application.
0275: An acrylic-blended latex flat finish designed for application • Excellent Hide - Covers stains and imperfections
to a wide variety of interior surfaces. • Touch Ups - Will not be visible, enabling professional painters
to move on to the next job
• Spatter Resistant - Minimal clean up
0276: An acrylic-blended latex semi-gloss enamel designed for • Excellent Hide - Covers stains and imperfections
application to a wide variety of interior surfaces. Decorative and • Touch Ups - Will not be visible, enabling professional painters
functional with easy application, quick drying and soap and water to move on to the next job
• Spatter Resistant - Minimal clean up
cleanup.
0277: An acrylic-blended latex pearl finish designed for application • Excellent Hide - Covers stains and imperfections
to a wide variety of interior surfaces. • Touch Ups - Will not be visible, enabling professional painters
to move on to the next job
• Spatter Resistant - Minimal clean up
0281: A quality, 100% acrylic latex semi-gloss enamel designed to • Excellent Hide - Covers stains and imperfections
provide a beautiful as well as a functional coating to many interior • Touch Ups - Will not be visible, enabling professional painters
surfaces. to move on to the next job
• Spatter Resistant - Minimal clean up
C271: A quality, interior alkyd enamel coating that dries to a hard, • Durable Finish - Stands up to repeated washing
semi-gloss finish. • Good Flow & Leveling - For excellent surface smoothness
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 39
†For the most up-to-date MPI specifications, visit www.mpi.net
Professional Specialty Coatings
Code Product Colors Bases Vol Sol. Cov. sq.ft. DFT mils VOC gm./l. Specifications†
White,
P06 Alkyd Metal Primer Colors
NA 59.0% 16 hrs. 450-550 1.9 313 MPI 79
P06: Provides excellent long term corrosion control with outstanding • Excellent Corrosion Resistance - Helps prevent corrosion from forming Not for immersion service, splash or
adhesion properties. Its ability to penetrate provides good performance • Excellent Adhesion - Can be applied over hard-to-coat surfaces spillage of acids, alkalies or strong
over hand or power tool cleaned surfaces. • Rust Inhibition - Helps prevent rust from forming solvents.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
White,
P22 Urethane Alkyd Gloss Enamel Colors
1-4 49.0% 8 hrs. 375-425 2.0 394 MPI 9, 48
P22: This urethane alkyd is superior to conventional alkyds when applied • Rust Inhibition - Helps prevent rust from forming Not for immersion or strong acid
to surfaces that are intermittently exposed to light chemical environments. • Mildew Resistance - Helps prevent mold and mildew from forming or chemical exposure. Requires a
It provides better color and gloss retention than epoxy esters on exterior • Multiple Uses - Interior and exterior application barrier or tie coat when applied
exposures. over zinc coated surfaces.
Metal substrates only.
40 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Professional Specialty Coatings
Benjamin Moore®
BENJAMINMOORE.COM
These products are designed to perform a dual purpose as a direct to metal primer and finish.
Both coats of the product provide rust inhibition for superior corrosion control.
Key Advantages:
Super Spec DTM’s provide rust inhibition for superior corrosion control and protection.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
White,
P23 D.T.M. Alkyd Low Lustre Enamel Colors
1-4 52.6% 16 hrs. 350-450 2.1 370 MPI 79
White,
P24 D.T.M. Alkyd Semi-Gloss Enamel Black
1-4 49.0% 16 hrs. 350-450 2.0 385 MPI 81
P23, P24: This product is designed to perform a dual purpose as a • Tough Film - For strong outstanding durability and adhesion Not for floors. Not for immersion
direct to metal primer and finish. Two coats of the product provide rust • Dual Purpose - Primer and finish coat service or strong acid or chemical
inhibition for superior corrosion control. • Rust Inhibition - Helps resist rust from forming exposure. Metal substrates only.
Not to be applied over wet surfaces.
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 41
†For the most up-to-date MPI specifications, visit www.mpi.net
Professional Interior
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Qualifies for LEED® v4 Credit,
0473 Eco Spec® WB Silver Flat Finish White 1-4 38.4% 1-2 hrs. 400-500 1.5 0 MPI 53, 53 X-Green™, 143, 143 X-Green™,
Qualifies for CHPS low emitting credit
Qualifies for LEED® v4 Credit,
0474 Eco Spec® WB Silver Eggshell Finish White 1-4 39.0% 1-2 hrs. 400-450 1.5 0 Qualifies for CHPS low emitting credit
0476 Eco Spec® WB Silver Semi-Gloss White 1-4 40.0% 1-2 hrs. 400-450 1.5 0 Qualifies for LEED® v4 Credit,
Finish Qualifies for CHPS low emitting credit
0473, 0474, 0476: A low odor, zero VOC*, 100% acrylic interior • Zero VOC* - Meets or exceeds strict environmental standards Do not apply when temperatures
paint that provides a washable finish. Eco Spec® WB Silver contains a in the industry, remaining 0 g/l, even after tinting are below 50°F (10°C).
unique antimicrobial package including micronized elemental silver that • Antimicrobial - Inhibits the growth of mold and mildew
on the surface of the paint film
inhibits the growth of mold and mildew on the surface. • Dries Quickly - Faster recoat; job is finished in less time
• MPI Approval - Meets key MPI categories
Benjamin Moore’s Green Promise® designation is our company’s assurance that this product meets – and often exceeds – rigorous
environmental and performance criteria regarding VOCs, emissions, application, washability, scrubbability, and packaging, while also
delivering the premium levels of performance you expect from Benjamin Moore.
42 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Professional Interior
Eco Spec WB
Benjamin Moore®
BENJAMINMOORE.COM
A Zero VOC*, Low Odor waterborne coating tinted with Benjamin Moore ’s proprietary Gennex
zero VOC* colorant system. It’s available in thousands of colors in three finishes while meeting
the highest environmental requirements.
Key Advantages:
Eco Spec WB is an enhanced 100% acrylic, zero VOC* and low odor coating that meets the highest MPI
approval. It contains antimicrobial additives that inhibit the growth of mold and mildew on the surface
of the paint film.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Qualifies for LEED® v4 Credit,
N372 Eco Spec® WB Primer White White 30.0% 1-2 hrs. 400-500 1.2 0 MPI 50, 50 X-Green™, 149, 149 X-Green™,
Qualifies for CHPS low emitting credit
Qualifies for LEED® v4 Credit,
N373 Eco Spec® WB Flat Finish White 1-4 39.0% 1-2 hrs. 400-450 1.5 0 MPI 53, 53 X-Green™, 143, 143 X-Green™,
Qualifies for CHPS low emitting credit
Qualifies for LEED® v4 Credit, MPI 52,
N374 Eco Spec® WB Eggshell Finish White 1-4 36.0% 1-2 hrs. 400-450 1.4 0 52 X-Green™, 145, 145 X Green,
Qualifies for CHPS low emitting credit
Qualifies for LEED® v4 Credit,
N376 Eco Spec® WB Semi-Gloss Finish White 1-4 40.0% 1-2 hrs. 400-450 1.5 0 MPI 54, 54 X-Green™,
Qualifies for CHPS low emitting credit
N372: Eco Spec® WB Primer is a zero VOC*, 100% acrylic interior latex • MPI Approval - Meets key MPI categories Do not apply when temperatures
with spatter resistant properties. Ideally suited for commercial facility • Zero VOC* - Meets or exceeds strict environmental standards are below 50°F (10°C).
management and residential applications. in the industry, remaining 0 g/l, even after tinting
• Antimicrobial - Inhibits the growth of mold and mildew on the
surface of the paint film
N373, N374, N376: Eco Spec® WB is a premium quality, zero VOC* • MPI Approval - Meets key MPI categories Do not apply when temperatures
paint that provides high hiding and excellent touch up. It is recommended • Zero VOC* - Meets or exceeds strict environmental standards are below 50°F (10°C).
for interior wallboard, plaster, ceilings and masonry as well as primed or in the industry, remaining 0 g/l, even after tinting
• Antimicrobial - Inhibits the growth of mold and mildew on the
previously painted metal or wood. surface of the paint film
Benjamin Moore’s Green Promise® designation is our company’s assurance that this product meets – and often exceeds – rigorous
environmental and performance criteria regarding VOCs, emissions, application, washability, scrubbability, and packaging, while also
delivering the premium levels of performance you expect from Benjamin Moore.
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 43
†For the most up-to-date MPI specifications, visit www.mpi.net
Specialty Interior Primers
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
0573 Ultra Spec® Latex Vapor Barrier White NA 27.0% 2 hrs. 450 1.0 44 Qualifies for LEED® Credit
Primer Sealer
0580 Ultra Spec® Prep Coat Hi-Build Latex White NA 39.0% 2-3 hrs. 150-250 4.2 13.6 Qualifies for LEED® v4 Credit,
Interior Primer Qualifies for CHPS low emitting credit
0573: A specially-designed interior latex primer sealer that provides • Forms a moisture vapor barrier and reduces heat loss Do not apply when air and surface
a film with low vapor permeability. This fast-drying, non breathing • Easy to apply temperatures are below 50°F (10°C).
primer-sealer acts as a moisture vapor barrier when applied on interior • Good adhesion and hide Do not apply to plaster surfaces that
• Perm rating of .5 when tested under ASTM E 96 are not fully cured. Full cure typically
walls and ceilings.
requires 30 days. Plaster will not cure
properly if sealed before full cure.
0580: A quality, vinyl acrylic latex wall surface. Designed to be used • Minimizes minor surface imperfections: paper fuzz, minor sanding Do not paint when temperature of air
as a heavily applied preparatory coat necessary to ensure the better grooves, nicks and pinholes. and surface is below 50°F (10°C).
appearance of newly applied drywall compound. Prep Coat is especially • Performs equally well underneath Benjamin Moore® latex or solvent
based finishes.
useful over joint lines and minor sanding grooves. • Easy to apply and fast drying for quick return to service
44 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Professional Masonry Products
Benjamin Moore®
BENJAMINMOORE.COM
Designated to penetrate, fill, seal and finish in one application the surface of new or previously painted
interior and exterior masonry surfaces, providing the proper foundation for subsequent finish coats.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
0452 Ultra Spec® Masonry Acrylic Latex White NA 41.0% 2-3 hrs. 400–475 5.0 42 Qualifies for LEED® Credit
Satin - FIL
Qualifies for LEED® v4 Credit,
0571 Ultra Spec® Masonry Int/Ext White NA 53.0% 2-3 hrs. 75-100 8.5-11.4 45 MPI 4, 4 X-Green™,
Hi-Build Block Filler Qualifies for CHPS low emitting credit
0608 Ultra Spec® Masonry Int/Ext 100% White NA 17.8% 4 hrs. 200-400 0.95 46 Qualifies for LEED® v4 Credit, MPI 3,
Acrylic Sealer Qualifies for CHPS low emitting credit
0609 Ultra Spec® Int/Ext Acrylic High White NA 24.3% 5 hrs. 350-400 1.0 46 Qualifies for LEED® v4 Credit, MPI 3,
Build Masonry Primer Qualifies for CHPS low emitting credit
0452: Formulated to fill, seal and finish in one application. Interior and • Easy Application - One-coat spray application Do not apply when air and surface
exterior surfaces of cured cinder block, poured / pre-cast concrete, brick • Withstands washing and scrubbing temperatures are below 50°F (10°C).
and other masonry structures, and incidental primed metal and wood. • Fast drying
May be used on interior wallboard and cured plaster.
0571: A full bodied and high build, latex block filler specially • Fills small cracks and voids in concrete, cinder block and masonry Should not be used as a water-
formulated to be used as a preparatory coating to create a less porous surfaces when properly top coated with a Benjamin Moore® proofing sealer or as a finish coat.
and smoother painting surface. This product is easy to brush or spray. exterior finish product Avoid application to surfaces freshly
• Low VOC treated with silicone type water
• Fills cracks and voids in concrete, cinder block and rough masonry repellents. Do not apply when air
and surface temperature are below
50°F (10°C).
0608: Designed to penetrate and seal the surface of new or previously • 100% acrylic formula Do not apply when air and surface
painted masonry surfaces providing the proper foundation for • Excellent adhesion temperatures are below 50°F (10°C).
subsequent finish coats. It can be applied to masonry with pH levels • High Alkali Resistant – up to pH 13
as high as 13. The clear can also be used as a decorative masonry sealer • Tintable
on interior or exterior masonry surfaces.
0609: Designed to penetrate and seal the surface of new or previously • Higher hiding Do not apply when air and surface
painted masonry surfaces providing the proper foundation for • Excellent adhesion temperatures are below 50°F (10°C).
subsequent finish coats. It can be applied to masonry with pH levels • High Alkali Resistant – up to pH 13
as high as 13. • Provides excellent surface adhesion
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 45
†For the most up-to-date MPI specifications, visit www.mpi.net
Professional Masonry Products
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
0359 Ultra Spec® Masonry Elastomeric White NA 38.6% Overnight 80-100 7.7 93
Waterproof Coating Flat
0359: A high-build, flat elastomeric coating with 200% elongation that is designed • 100% Acrylic Formula Do not apply if rain or threatening
to beautify and protect masonry structures from damage due to weathering and • Breathable Finish - Allows interior moisture to escape without weather is expected within 24 hours.
moisture intrusion. When applied as directed, at up to 20 mils wet film thickness per damage to the film Minimum film forming temperature
coat, this product fills pores, and bridges minor surface cracks to create a monolithic • Mildew Resistant 50°F (10°C).
film that protects masonry from the weather’s deteriorating effects. • Flat Finish - Hides minor surface imperfections
0360: A high-build, low lustre elastomeric coating with 300% elongation that is • 100% Acrylic Formula Do not apply if rain or threatening
designed to beautify and protect masonry structures from damage due to weathering • Breathable Finish - Allows interior moisture to escape without weather is expected within 24 hours.
and moisture intrusion. When applied as directed, at up to 20 mils wet film thickness damage to the film Minimum film forming temperature
per coat, this product fills pores, and bridges minor surface cracks to create a • Mildew Resistant 50°F (10°C).
monolithic film that protects masonry from the weather’s deteriorating effects. • Low Lustre Finish - Stays clean longer
46 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Professional Interior
Benjamin Moore®
BENJAMINMOORE.COM
An innovative, high-performance, single-component latex coating specifically engineered to deliver
superior scuff-resistance than traditional two-component coatings without the measuring, pre-mixing,
strong odor, short pot life and application difficulties related to those products.
Key Advantages:
This unique product was engineered using our proprietary scuff-resistance technology to meet the
performance demands of the most challenging high-traffic commercial spaces. SCUFF-X provides
long term durability with superior scuff-resistance in a latex formula that can be applied to occupied
areas for a quick return to service and reduced downtime.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
0484 Ultra Spec® SCUFF-X® Interior White 1-4 39% 2-3 hrs. 350-400 1.7 82 Qualifies for LEED® v4 Credit,
Matte Finish Qualifies for CHPS low emitting credit
0485 Ultra Spec® SCUFF-X® Interior White 1-4 40% 2-3 hrs. 350-400 1.7 88 Qualifies for LEED® v4 Credit,
Eggshell Finish Qualifies for CHPS low emitting credit
0486 Ultra Spec® SCUFF-X® Interior White 1-4 39% 2-3 hrs. 350-400 1.7 86 Qualifies for LEED® v4 Credit,
Satin Finish Qualifies for CHPS low emitting credit
0484, 0485, 0486: A high-performance, one-component • Proprietary scuff-resistance formula Do not apply when air and surface
coating specifically engineered to deliver outstanding performance and • Highly washable temperatures are below 50°F (10°C).
protection for the toughest high-traffic areas in busy commercial spaces. • Quick-dry
This unique product offers superior scuff-resistance than traditional • Excellent flow and leveling
two-component epoxies in the market, without the odor, pre-mixing, pot • Spatter resistant
life and application difficulties related to these products. It will hold up to • Smooth application
repeated cleaning without causing any permanent damage to the paint.
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 47
†For the most up-to-date MPI specifications, visit www.mpi.net
Professional Interior
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC Specifications†
gm./l.
N536, N537, N538, N539, N540: A professional quality, • Smooth Application - Saves time and effort on every job Do not apply when air and surface
interior waterborne paint based on a proprietary acrylic copolymer resin • Zero VOC* - Meets or exceeds strict environmental standards in the industry, temperatures are below 50°F (10°C).
that tints on the Gennex® zero VOC* colorant system. remaining 0 g/l, even after tinting
• MPI Approval - Meets key MPI categories
• Dries Quickly - Faster recoat
Cradle to Cradle CertifiedTM is a certification mark licensed by the Cradle to Cradle Products Innovation Institute. All other marks are the property of their
respective owner. This product is not endorsed by or a division or affiliate of CHPS. This product is provided by Benjamin Moore not CHPS.
Benjamin Moore’s Green Promise® designation is our company’s assurance that this product meets – and often exceeds – rigorous
environmental and performance criteria regarding VOCs, emissions, application, washability, scrubbability, and packaging, while also
delivering the premium levels of performance you expect from Benjamin Moore.
*Zero VOC according to EPA Method 24
48 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Professional Exterior
Benjamin Moore®
BENJAMINMOORE.COM
A low VOC, professional-quality exterior coating designed to meet the needs of professional painting
contractors, facility managers, property managers and specifiers.
Key Advantages:
Formulated to provide excellent durability for maximum protection. It features superior coverage, ease
of application and enhanced adhesion to a wide variety of surfaces. Ultra Spec EXT can be applied in
temperatures as low as 40°F.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
N558 Ultra Spec® EXT Latex Primer White NA 35.0% 3 hrs. 400-450 1.4 45 MPI 6
N447 Ultra Spec® EXT Flat Finish White 1-4 37.4% 4 hrs. 350-450 1.5 45 MPI 10
N455 Ultra Spec® EXT Low Lustre Finish White 1-4 34.0% 4 hrs. 350-475 1.3 44 MPI 214
N448 Ultra Spec® EXT Satin Finish White 1-4 37.7% 4 hrs. 350-450 1.5 46 MPI 15
N449 Ultra Spec® EXT Gloss Finish White 1-4 37.8% 4 hrs. 350-450 1.5 46 MPI 11
N558: An exterior, acrylic-blended latex primer intended for use under • All Season Primer Do not apply when air and surface
latex exterior house paints to provide a total breathable system. • Low Temperature 35°F Application temperatures are below 35°F (2°C).
• Excellent Hiding and Leveling Properties
• Fast Dry
N447: A professional quality, 100% acrylic, exterior flat finish • 100% Acrylic Latex Formula - Delivers superior hide and coverage Do not apply when air and surface
recommended for wood, hardboard, vinyl, aluminum and fiber cement • Low VOC - Meets the strictest environmental standards temperatures are below 40°F
sidings, unglazed brick, concrete, stucco, cinder block and primed metal. in the industry (4.4°C). Do not paint vinyl siding
• Can Be Applied Down to 40°F - Extends the painting season or trim darker than the original
• 25 Year Warranty* color in general.
N455: A professional quality, 100% acrylic, exterior latex low luster • 100% Acrylic Latex Formula - Delivers superior hide and coverage Do not apply when air and surface
paint designed for application to a wide variety of exterior surfaces such • Low VOC - Meets the strictest environmental standards in the temperatures are below 40°F (4.4°C).
as wood, hardboard, vinyl and aluminum siding, shingles, unglazed brick, industry
concrete, stucco, cinder block and primed metal. • May be applied at temperatures down to 40°F (4.4°C).
• 25 Year Warranty*
N448: A professional quality, 100% acrylic, exterior satin finish • 100% Acrylic Latex Formula - Delivers superior hide and coverage Do not apply when air and surface
recommended for wood, hardboard, vinyl, aluminum and fiber cement • Low VOC - Meets the strictest environmental standards temperatures are below 40°F
sidings, unglazed brick, concrete, stucco, cinder block and primed metal. in the industry (4.4°C). Do not paint vinyl siding
• Can Be Applied Down to 40°F - Extends the painting season or trim darker than the original
• 25 Year Warranty* color in general.
N449: A professional quality, 100% acrylic, exterior gloss finish • 100% Acrylic Latex Formula - Delivers superior hide and coverage Do not apply when air and surface
recommended for wood, hardboard, vinyl, aluminum and fiber cement • Low VOC - Meets the strictest environmental standards temperatures are below 40°F
sidings, unglazed brick, concrete, stucco, cinder block and primed metal. in the industry (4.4°C). Do not paint vinyl siding
• Can Be Applied Down to 40°F - Extends the painting season or trim darker than the original
• 25 Year Warranty* color in general.
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 49
†For the most up-to-date MPI specifications, visit www.mpi.net
Professional Exterior
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
0450 Ultra Spec® Exterior Acrylic Solid White 1-4 26.0% 4 hrs. 300-450 1.1 43
Color Stain
0450: Designed for use on exterior siding and trim surfaces of wood, • Durable Finish - Resists fading, cracking and peeling Do not apply when air and surface
engineered wood, hardboard and fiber cement where a rustic flat finish • Excellent Color Retention - Color stays truer, longer temperatures are below 50°F (10°C).
is desired. It may also be used on unglazed brick, concrete, stucco, cinder • Mildew Resistant - Resists the growth of mold and mildew Not for interior use.
block and incidental primed metal surfaces.
50 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Professional Specialty Coatings
Benjamin Moore®
BENJAMINMOORE.COM
A professional quality paint designed to provide superior corrosion control and protection for metal
substrates. Improved acrylic formula offers excellent color and gloss retention, easy application and can be
tinted with Gennex colorants.
Key Advantage:
Ultra Spec DTM’s provide rust inhibition for superior corrosion control and protection.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Qualifies for LEED® v4 Credit, 107,
HP04 Acrylic Metal Primer White NA 43.0% 2 hrs. 300-400 2.0 45 107 X-Green™, 134 ,
Qualifies for CHPS low emitting credit
White, Qualifies for LEED® v4 Credit, MPI 141, 153,
HP25 D.T.M. Acrylic Low Lustre Enamel Colors
1 to 4 46.0% 4 hrs. 320 2.3 145 Qualifies for CHPS low emitting credit
White, Qualifies for LEED® v4 Credit, MPI 114, 154,
HP28 D.T.M. Acrylic Gloss Enamel Colors
1 to 4 46.0% 4 hrs. 320 2.3 142 Qualifies for CHPS low emitting credit
White, Qualifies for LEED® v4 Credit, MPI 141, 153,
HP29 D.T.M. Acrylic Semi-Gloss Enamel Colors
1 to 4 46.0% 4 hrs. 320 2.3 147 Qualifies for CHPS low emitting credit
HP04: This unique waterborne, acrylic primer minimizes flash rusting • Water Thinned - Low VOC properties Not for immersion service or exposure
and protects steel from corrosion. Its low odor and low VOC formula is ideal • Rust Inhibition - Helps prevent rust from forming to strong chemicals, acids or alkali.
for use on interior and exterior ferrous and galvanized metal. • Excellent Adhesion - Can be applied over hard-to-coat surfaces
HP25: This product is designed to perform dual purpose as a direct to • Dual Purpose - Primer and finish coat Not for immersion or strong acid or
metal primer and finish. Both coats of the product provide rust inhibition • Dries Quickly - Faster recoat; job is finished in less time chemical exposure. Requires a barrier
for superior corrosion control. The acrylic formula provides excellent gloss • Excellent Adhesion - Can be used over hard-to-coat surfaces or tie coat when applied over zinc
• Corrosion Resistant - Helps resist corrosion from forming coated surfaces.
and color retention. The film is fast drying permitting fast recoat. This
product is also an excellent finish for masonry, plaster, wallboard and
interior wood surfaces.
HP28: This product is designed to perform dual purpose as a direct to • Dual Purpose - Primer and finish coat Not for high traffic doors. Not for
metal primer and finish. Both coats of the product provide rust inhibition • Dries Quickly - Faster recoat; job is finished in less time immersion service or strong acid or
for superior corrosion control. The acrylic formula provides excellent gloss • Excellent Adhesion - Can be used over hard-to-coat surfaces chemical exposure. Minimum film
• Corrosion Resistant - Helps resist corrosion from forming forming temperature 50°F (10°C)
and color retention. The film is fast drying permitting fast recoat. This
product is also an excellent finish for masonry, plaster, wallboard and
interior wood surfaces.
HP29: This product is designed to perform dual purpose as a direct to • Dual Purpose - Primer and finish coat Do not apply when temperatures are
metal primer and finish. Both coats of the product provide rust inhibition • Dries Quickly - Faster recoat; job is finished in less time below 50°F (10°C).
for superior corrosion control. The acrylic formula provides excellent gloss • Excellent Adhesion - Can be used over hard-to-coat surfaces
• Corrosion Resistant - Helps resist corrosion from forming
and color retention. The film is fast drying permitting fast recoat. This
product is also an excellent finish for masonry, plaster, wallboard and
interior wood surfaces.
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 51
†For the most up-to-date MPI specifications, visit www.mpi.net
Custom-Crafted Applicators
For painters that settle for nothing than the very best, our Custom Crafted Applicators feature
the highest quality natural and synthetic materials. These applicators are custom-blended and
are specifically designed for use with Benjamin Moore® premium paints.
Custom-Crafted Brushes
Chinex: Benjamin Moore® Chinex paintbrushes create a smooth finish, have low moisture absorption for stiffness retention, Angle Sash: 2½" – 3"
and clean up easily. Outstanding paint capacity delivers fast results with all Benjamin Moore® paints. Flat Sash: 2" – 3"
100% Polyester: Made with chemically tipped filaments, Benjamin Moore® 100% polyester paintbrushes virtually eliminate Angle Sash: 1½" – 2" – 2½"
brushmarks. They provide superior smoothness and excellent paint capacity. Recommended for all paints, especially lighter or Varnish: 1½" – 2" – 3"
thinner coatings.
White China Bristle: With their naturally soft brush tips, these brushes provide an exceptionally smooth finish with Angle Sash: 1½" – 2" – 2½"
virtually no brush marks. These brushes are formulated for all oil-based coatings, especially interior enamels, marine coatings, Thin Angle Sash: 1" – 2" – 2½"– 3"
varnishes and stains. Flat Sash: 1½" – 2" – 2½"
Varnish: 2" – 3"
Wall: 4"
Black China Bristle: These brushes are custom formulated and recommended for all oil-based coatings. They provide Angle Sash: 1½" – 2" – 2½"
excellent capacity with a smooth finish. Especially suited for high-productivity applications using exterior enamels, industrial Thin Angle Sash: 1” – 2" – 2½"
coatings, urethanes and varnishes. Flat Sash: 1½" – 2" – 2½" – 3"
Varnish: 3"
Synthetic and natural bristle blend: Our stainer brush provides and holds more stain for less dripping and delivers a smooth Acrylic & Oil 4"
even finish. Stain Brush:
52 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Custom-Crafted Applicators
Benjamin Moore®
BENJAMINMOORE.COM
Custom-Crafted
Roller Covers
Lambswool Roller Covers: Benjamin Moore® lambswool roller covers are made of hand-sewn, buff-colored shearling. They /8 inch nap:
3
9"
set the standard for professional finish quality with all paints, including latex, enamels and varnishes. ½ inch nap: 9"
¾ inch nap: 9"
Poly/Wool Roller Covers: The golden yellow fabric blend of 50% lambswool and 50% polyester in Benjamin Moore® poly/ ½ inch nap: 9"
wool roller covers delivers 100% performance in all flat and satin paints or stains. Wool provides maximum paint capacity and a ¾ inch nap: 9"
smooth finish; polyester resists matting and adds resilience in hot weather.
All Purpose Roller Covers: The all-purpose roller cover is a money-saving choice for fast, smooth results. The shed-resistant /8 inch nap:
3
9"
fabric works with all paints, enamels and primers. ½ inch nap: 9"
Mini-Roller Refills: These professional mini-rollers fit standard 1/4" frames with the “slide on, slide off” feature. The golden 4½" High-Capacity: 3
/8" & ½" NAP
yellow fabric is designed for all flat paints and stains. 4½" Shed-Resistant: 3
/8" & ½" NAP
6½" High-Capacity: 3
/8" & ½" NAP
6½" Shed-Resistant: 3
/8" & ½" NAP
4½" Poly/Wool: ½" NAP
6½" Poly/Wool: ½" NAP
4½" Mohair: ¼" NAP
6½" Mohair: ¼" NAP
Aura® Roller Cover: The Aura® roller cover was specifically designed to be the ideal roller for use with Benjamin Moore® 3
/8 inch nap: 9"
super-premium Aura® paints. It provides the optimal balance of surface smoothness and hide, while also offering shed 1
/2 inch nap: 9"
resistance and a tough phenolic core. 3
/8 inch nap: 18"
Nap Surface(s)
/16"
3
Smooth surfaces: untextured plaster, smooth wood and wallboard, drywall and metal
/8" to ½"
3
Medium surfaces: sand finishes, lightly textured plaster or wood, paneling and acoustical tile
¾" to 1¼" Rough surfaces: brick, concrete, stucco, textured ceiling or walls, Spanish plaster, corrugated metal and rough wood
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 53
†For the most up-to-date MPI specifications, visit www.mpi.net
Professional Quality Applicators
Polyester/Nylon: Each brush is a blend of tapered nylon and polyester Angle Sash: 1 ½" – 2" – 2½" – 3"
filament. Its extra firm composition results in a stronger, stiffer touch and Flat Sash: 1 ½" – 2" – 2½" – 3"
chiseled trim. Every brush is finished with a sanded and polished hardwood Varnish: 1 ½" – 2" – 2½" – 3"
handle and copper ferrules. Wall: 4"
High Capacity Roller Covers: These roller covers are produced with the /8 inch nap:
3
9"
finest quality knitted synthetic fabric. They offer the maximum paint pick-up ½ inch nap: 9"
and release. These covers resist matting and can be used with any Benjamin ¾ inch nap: 9"
Moore® paint on any type of surface. The heavy-duty polypropylene is
resistant to water and solvents.
Shed Resistant Roller Covers: These covers are made from the finest ¼ inch nap: 9"
blend of white woven fabric and provide maximum protection against 3
/8 inch nap: 4" – 9"
shedding. Each cover offers a lint-free finish that can be used with any ½ inch nap: 4" – 9"
Benjamin Moore® paint on any type of surface. The heavy-duty polypropylene
core withstands water and solvents.
Also available: 6-piece painting kit; 4" and 9" roller frames
54 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
www.benjaminmoore.com
BENJAMIN MOORE® COROTECH®
Waterborne Primers
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
275 (Sealer/
V027 Clear Acrylic Sealer Clear NA 11.9% 2 hrs. Primer), 0.5-0.7 164
350 (Topcoat)
V027: Clear Acrylic Sealer is a waterborne, fast drying, clear acrylic • Rapid dry
coating formulated as an easy-to-apply seal coat on bare concrete floors • Soap and water clean-up
and other masonry surfaces. • Can be used over a variety of substrates
• Low odor
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
White,
V110 Acrylic Metal Primer Red
NA 40.6% 4 hrs. 350-450 1.4-1.9 199
V110: Acrylic Metal Primer is a water-reducible, rust-inhibitive primer for • Direct to Metal - Excellent anti-corrosive properties V110.10 can also be used as a flat
steel, iron and non-ferrous metal. for lasting protection finish coat.
• Water Clean-Up - Easier to use, making project run more efficiently
• May Be Used in Occupied Spaces and in More
Regulated Districts
56 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Waterborne Primers
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
BENJAMINMOORE.COM
Product Description Features/Benefits Notes
V125: Water Reducible Epoxy Ester Primer is a one-component, water- • Excellent Corrosion Resistance - Applies like a conventional alkyd
thinned industrial primer offering the application and performance paint with easy soap and water clean-up
characteristics of a conventional alkyd primer without the odor and solvent • Water Clean-Up - No solvents needed
clean-up normally associated with these products. • Outstanding Durability - Allows for more surface tolerance
and easier application
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Translucent
V175 Waterborne Bonding Primer Green NA 37.0% 2 hrs. 300-400 1.5-2.0 85
V175: Waterborne Bonding Primer is a one-component bonding primer • Water Clean-Up - Safer than ordinary wash coat primers Not For Immersion Services. When
that may also be used as a rust-inhibitive universal primer. This product • Bonds to All Metals - Versatile for use even on Stainless Steel used on stainless steel or cold rolled
bonds to various metals creating a solid foundation for finishing coats. • Fast Dry - Reduces labor and speeds productivity steel, it is imperative that there be
a surface profile of at least 1 mil and
that it be jagged in nature.
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 57
†For the most up-to-date MPI specifications, visit www.mpi.net
Alkyd Primers
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
White,
V131 Universal Metal Primer Red, Gray
NA 60.0% 4 hrs. 450-500 1.9-2.1 333
V131: Universal Metal Primer is a high-performance, one-component, • Dry to Touch in 1 Hour - Allows for fast turn-around of
quick-dry, rust-inhibitive metal primer, formulated for use on ferrous metal production work
substrates. • Phenolic-Based - May be used in a wide variety of finishing systems
• High Volume Solids - Coverage on various surface profiles
• Rust-Inhibitive Metal Primer
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
White,
V132 Prep All Universal Metal Primer Red, Gray
NA 50.0% 4 hrs. 350-450 1.8-2.3 393
V132: Prep All Universal Metal Primer is an economical, single- • Dry to Touch in 30 Minutes - Allows for fast turn-around of
component primer engineered to provide corrosion protection on all production work
ferrous metals. • Phenolic-Based - May be used in a wide variety of finishing systems
• Protection in Mildly Corrosive Environments
58 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Alkyd Primers
V133 Alkyd Shop Coat Primer Red, Gray NA 53.0% 2 hrs. 350-450 1.9-2.4 394
BENJAMINMOORE.COM
Product Description Features/Benefits Notes
V133: Shop Coat Primer is a quick-drying formulation that can withstand • Dry to touch in 30 minutes, recoat in 2 hours Not intended for severe chemically
mild-to-moderate atmospheric conditions. • Provides a barrier protection in mild-to-moderate corrosive environments, immersion
corrosive environments service or non-ferrous metals such
• For all metal fabricators as galvanized metals.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
White,
V140 Alkyd Fabrication Primer Red, Gray
NA 57.0% 8 hrs. 430-500 1.8-2.1 329 MPI# 79
V140: Alkyd Fabrication Primer is formulated for use in mild-to- • Dries in 2 hours, recoat in 8 hours Can be top coated with most finishes
moderate exposures. Its excellent wetting properties allow application to • Excellent wetting properties for maximum penetration that do not contain strong solvents
marginally-prepared surfaces. (such as ketones, xylene and toluene).
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 59
†For the most up-to-date MPI specifications, visit www.mpi.net
Alkyd Primers
Shop Primer
Shop Primer is an economical steel primer for commercial use in mild-to-moderate exposures. This
product is ideal as a temporary transport coat on fabricated pieces or as an economical barrier primer. It
is a temporary coating. This primer may be top-coated with a wide variety of finishes. However, finishes
containing strong solvents (Ketones, Xylene, Toluene) may cause wrinkling or lifting of Shop Primer.
Key Advantages:
Dry to touch in 30 minutes, accepts a wide variety of topcoats, economical protective coat.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
V142 Shop Primer Red, Gray NA 53.0% 2 hrs. 350-400 2.1-2.4 337
V142: Shop Primer is an economical steel primer for commercial use in • Dry to Touch in 30 Minutes - Allows for fast turn-around of
mild to moderate exposures. production work
• May Be Used in Most Regions
60 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Specialty and Flooring Primers
BENJAMINMOORE.COM
V150 Polyamide Epoxy Primer Red, Gray NA 62.0% 8 hrs. 350-400 2.5-2.8 322
V150: Polyamide Epoxy Primer is formulated for use on ferrous and • Superior Corrosion Protection - Lasting durability
non-ferrous metals in industrial and commercial applications. This two- • High Chemical Resistance - Allows for use in more
component, rust-inhibitive epoxy primer is an excellent choice for use extensive environments
as a rust-inhibitive base coat when used as part of a high-performance • For Containment or Immersion Service - Broader use
coating system. on more projects
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
V155 100% Solids Epoxy Pre-Primer Clear NA 99.0% 12 hrs. 500-800 2.0-3.2 6
(On Concrete)
V155: 100% Solids Epoxy Pre-Primer is formulated for use on both steel • Extreme Surface Tolerance - Penetrates while driving Uniquely engineered for use on
and masonry. Its low molecular weight allows it to penetrate deep into out trapped moisture concrete floors and reinforcement
the substrate. • 100% Solids - Allows for complete filling of voids and crevices of rusted steel. It seals loose edges
• Does Not Shrink and penetrates crevices, pinholes and
• Low Viscosity - Deep penetration other surface imperfections when
removal or disassembly of metal
components is not practical.
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 61
†For the most up-to-date MPI specifications, visit www.mpi.net
Specialty and Flooring Primers
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
V156: Moisture Tolerant Quick-Set Epoxy Sealer is a two-component, • Fast Set and Return to Service - Minimizes down time
fast-dry, waterborne polyamide hybrid sealer for masonry floors. • Chemical Resistant - May be used on various projects
and severe environments
• Water Clean-Up - Minimizes water and may be applied
in occupied spaces
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
V170 Organic Zinc Rich Primer Gray NA 43.0% 12 hrs. 300-400 1.7-2.3 500 MPI# 18
V170: Organic Zinc Rich Primer is a heavy-duty corrosion inhibitor for • High Zinc Content - Maximizes cathodic protection Not recommended to be applied
interior or exterior ferrous metal and weathered galvanized metal. and corrosion resistance over previous finishes, and not
• May Be Top-Coated with Most Finishes - Allows for a versatile for immersion service.
choice of most finishes and various projects
62 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Waterborne Enamels
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
White,
BENJAMINMOORE.COM
Product Description Features/Benefits Notes
V210: Water Reducible Alkyd is a water-thinned industrial enamel • Waterborne product No need for solvent. Offers fast
offering the application and performance characteristics of a conventional • Exceptional flow turnaround. Tints with universal
alkyd enamel without the odor and solvent clean-up normally associated • Tough durable barrier protection colorant.
with these products.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Clear,
V300 Quick Dry Acrylic Spray DTM White, X 40.0% 2 hrs. 300-400 1.6-2.1 87 SSPC Paint spec. 24, MPI# 114
Colors
V300: Quick Dry Acrylic Spray DTM is an extremely durable, UV-resistant, • Water Clean-Up - Easy to use and may be applied Extremely hard and durable WB Acrylic DTM with
modified-acrylic enamel that provides superior adhesion and maximum in occupied spaces excellent scratch resistance. Has superior early
durability. Spray only application. • UV Protection - Lasting gloss and exterior protection block resistance. Tints with universal colorant.
• Fast Dry - Reduces labor and speeds productivity
• Direct to Metal - No primer needed
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 63
†For the most up-to-date MPI specifications, visit www.mpi.net
Waterborne Enamels
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
White,
V330 Acrylic DTM Enamel Gloss Colors
X 40.0% 4 hrs. 300-350 1.8-2.1 199 MPI# 154
V331 Acrylic DTM Enamel Semi-Gloss White X 42.0% 4 hrs. 300-350 1.9-2.2 204 MPI# 153
V330: Acrylic DTM Enamel (Gloss) is a tough, waterborne acrylic enamel • Water Clean-Up - Easy to use and may be applied Outperforms most “DTM” systems on the market,
that fights rust on metal and provides a smooth, durable finish on wood, in occupied spaces having far superior resistance to moisture
drywall and masonry substrates. • UV Protection - Lasting gloss and exterior protection throughout the coating life. Additionally, the
• Fast Dry - Reduces labor and speeds productivity product is formulated with special inhibitors,
• Direct to Metal - No primer needed which prevent flash rusting when applied to
ferrous metals. Tints with universal colorant.
V331: Acrylic DTM Enamel (Semi-Gloss) is a tough, waterborne acrylic • Water Clean-Up - Easy to use and may be applied Outperforms most “DTM” systems on the market,
enamel that fights rust on metal and provides a smooth, durable finish on in occupied spaces having far superior resistance to moisture
wood, drywall and masonry substrates. • UV Protection - Lasting gloss and exterior protection throughout the coating life. Additionally, the
• Fast Dry - Reduces labor and speeds productivity product is formulated with special inhibitors,
• Direct to Metal - No primer needed which prevent flash rusting when applied to
ferrous metals. Tints with universal colorant.
64 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Waterborne Enamels
BENJAMINMOORE.COM
Epoxy Semi-Gloss
V342 Pre-Catalyzed Waterborne Wall White X 38.0% 2 hrs. 350-450 1.5-1.7 73 MPI# 151
Epoxy Eggshell
V341: Pre-Catalyzed Waterborne Wall Epoxy (Semi-Gloss) provides • Durable Finish - Lasting protection saves money Not recommended for floors. Tints
epoxy toughness in a ready-to-use waterborne formula for walls, ceilings • Resists Common Chemicals - May be used in moderately with universal colorant.
and trim (not ideal for floors). severe environments
• Water Clean-Up - Easy to use and may be applied
in occupied areas
V342: Pre-Catalyzed Waterborne Wall Epoxy (Eggshell) provides epoxy • Durable Finish - Lasting protection saves money Not recommended for floors. Tints
toughness in a ready-to-use waterborne formula for walls, ceilings and • Resists Common Chemicals - May be used in moderately with universal colorant.
trim (not ideal for floors). severe environments
• Water Clean-Up - Easy to use and may be applied
in occupied areas
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 65
†For the most up-to-date MPI specifications, visit www.mpi.net
Alkyd Enamels
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
White, MPI# 9, 27, 48
V200 Alkyd Urethane Enamel Gloss Colors
X 56.0% 12 hrs. 400-450 2.0-2.2 335 MPI# 1 (V200-78 Aluminum)
White,
V201 Alkyd Urethane Enamel Semi-Gloss Black
X 59.0% 12 hrs. 400-450 2.1-2.4 320
V200: V200 (Gloss) product is a heavy-duty alkyd enamel intended for • May Be Used in Various Air Quality Districts in the US and Canada Do not topcoat with products such
use on a wide variety of surfaces, both interior and exterior. • Rust Preventative Coating - Protects metal surfaces with lasting protection as Epoxies or Urethanes containing
• Durable, Hard Coating - Resists marring and scratching aromatic or oxygenated solvents.
and delivers a lasting finish Tints with universal colorant.
V201: V201 (Semi-Gloss) product is a heavy-duty alkyd enamel intended • May Be Used in Various Air Quality Districts in the US and Canada Do not topcoat with products such
for use on a wide variety of surfaces, both interior and exterior. • Rust Preventative Coating - Protects metal surfaces with lasting protection as Epoxies or Urethanes containing
• Durable, Hard Coating - Resists marring and scratching aromatic or oxygenated solvents.
and delivers a lasting finish Tints with universal colorant.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
White,
V210 Water Reducible Alkyd Enamel Black
X 29.0% 2 hrs. 350-450 1.0-1.3 336
V210: Water Reducible Alkyd is a water-thinned industrial enamel • Waterborne product No need for solvent. Offers fast
offering the application and performance characteristics of a conventional • Exceptional flow turnaround. Tints with universal
alkyd enamel without the odor and solvent clean-up normally associated • Tough durable barrier protection colorant.
with these products.
66 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Alkyd Enamels
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
BENJAMINMOORE.COM
Product Description Features/Benefits Notes
V220: Rapid Dry Alkyd Enamel is a high-performance, quick-dry, rust- • Fast 10 Minute Dry - High productivity in metal finishing SHOP/OEM Applications Only. Tints
preventive shop enamel formulated for use on ferrous metal substrates. • Hard and Scratch Resistant - Lasting durability and service with IM colorant.
• Corrosion Resistance - Allows for a long lasting finish
on all ferrous metals
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
White,
V225 High-Solids Rapid-Dry Enamel Colors
X 52.0% 2 hrs. 320-420 2.0-2.6 332 MPI# 48, 96
V225: V225 is designed as a finish coat for metal where a rugged, • General Purpose, Quick-Drying Enamel for Metal and Other Spray application preferred. Small
abrasion-resistant, high-gloss finish is desired. Prepared Surfaces areas may be brushed or rolled. Tints
• Dries Quickly - Fast production with IM colorant.
• Durable Hard Finish - Final paint film lasts longer
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 67
†For the most up-to-date MPI specifications, visit www.mpi.net
Alkyd Enamels
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
White,
V230 Quick Dry Alkyd Enamel Gloss Colors X 51.0% 2 hrs. 350-450 1.9-2.4 395 MPI# 96
White,
V231 Quick Dry Alkyd Enamel Semi-Gloss Colors X 52.0% 2 hrs. 350-450 1.8-2.3 389 MPI# 81
V230: Quick Dry Alkyd Enamel (Gloss) is a high-performance, single- • Fast 15 Minute Dry - High productivity in metal finishing Not recommended for floors or for
component, quick-dry, rust-preventive enamel formulated for use on • Hard and Scratch Resistant - Lasting, durability and service extreme environments. This product
ferrous metal substrates. • Corrosion Resistance - Allows for a long lasting finish may yellow under some conditions,
on all ferrous metals especially in interior applications.
Tints with IM colorant.
V231: Quick Dry Alkyd Enamel (Semi-Gloss) is a high-performance, • Fast 30 Minute Dry - High productivity in metal finishing Not recommended for non-ferrous metals
single-component, quick-dry, rust-preventive enamel formulated for use • Hard and Scratch Resistant - Lasting, durability and service such as galvanized, aluminum unless
on ferrous metal substrates. • Corrosion Resistance - Allows for a long lasting finish properly primed. Not recommended for
on all ferrous metals exterior wood surfaces. Not for immersion
services. Will lose gloss rapidly in exterior
applications. Tints with IM colorant.
68 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Specialty Enamels
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
BENJAMINMOORE.COM
Product Description Features/Benefits Notes
V260: Electrostatic Alkyd Enamel is a quick-dry, rust-preventive paint • Optimized Polarity - Allows for effective spray ‘wrap’, Not for immersion service. Tints with
that is applied only via electrostatic spray, with no need to adjust polarity. saving time and productivity IM colorant.
• Durable Hard Finish - Resists marring and scratching,
and delivers a lasting finish
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
V264 Silicone Alkyd High-Heat Coating Aluminum NA 43.0% 4 hrs. 350-400 1.7-2.0 442 MPI# 2
V264: Silicone Alkyd High-Heat Coating is designed to protect steel that • High Heat Resistance - Allows for use on industrial machinery, Not for interior residential use.
is exposed to heat ranges up to 800°F (425°C). hot metal ducting and exhaust vents
• Fast Dry - Quick return to service
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 69
†For the most up-to-date MPI specifications, visit www.mpi.net
Epoxies
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
White
V160 Epoxy Mastic Coating (Tintable) X 79.0% 12 hrs. 175-275 4.6-7.2 184
V160: Epoxy Mastic Coating is a high-solids, rust-inhibitive, surface- • Surface Tolerant - May be used on surfaces with marginal Due to the high build nature of
tolerant epoxy mastic for professional use in industrial and commercial surface prep this product, only a one-gallon
applications. • High Solids - Provides proper film thickness as an intermediate coat formula is required to tint the
• Chemical Resistant - May be used in severe environments two-gallon kit. Tints with IM colorant.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
V165: Epoxy Patch is a 100% solids epoxy co-polymer matrix for repairing • Mix On Site - Versatility allows for customized applications Cannot be applied over damp
and patching interior concrete floors. by the contractor surfaces.
• High Solids - Fills cracks in less steps, saving time and labor **Appears gray when mixed with aggregate.
70 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Epoxies
V400: Polyamide Epoxy Coating is a multi-use epoxy designed for • Chemical Resistant - May be used in environments *Vol. solids %: 63.0% (Gloss Sheen),
tanks, machinery, floors, structural members, walls, boats and other with severe exposure 62.0% (Semi-Gloss Sheen), 66.0%
industrial and commercial substrates requiring a durable coating in severe • High Solids - Better coverage with less coats (High Build)
environments. **400-500 sq. ft. (Gloss and Semi-Gloss
Sheens), 200-250 sq. ft. (High Build)
***2.0-2.5 mils (Gloss and Semi-Gloss
Sheens), 4.2-5.3 mils (High Build)
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
V410 Fast-Dry Polyamide Epoxy Coating White NA 72.0% 8 hrs. 350-500 2.3-3.3 241
V410: Fast-Dry Polyamide Epoxy is a unique satin sheen epoxy that fully • Fast Dry - Quick return to service saves money
cures in 3 to 5 days at 77°F. and reduces down time
• Chemical Resistant - May be used in environments
with severe exposure
• High Solids - Better coverage with less coats
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 71
†For the most up-to-date MPI specifications, visit www.mpi.net
Epoxies
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Clear,
V430 100% Solids Epoxy Floor Coating White, NA 99.0% 12 hrs. 100-150 10.6-15.9 13
Colors
V430: Heavy-duty protection from a 100% solids epoxy for demanding • Chemical Resistant - May be used in environments High build, fast cure with exceptional
industrial/commercial environments exposed to heavy vehicular and with severe exposure chemical and abrasion resistance.
pedestrian traffic, constant moisture, intermittent strong chemical spills, • 100% Solids - No reduction in applied film delivers
and frequent cleaning with chemicals, steam and power washers. maximum coverage
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Clear,
V440 Waterborne Amine Epoxy White, X 43.5% 8 hrs. 375-475 1.5-1.9 206
Colors
V440: Waterborne Amine Epoxy is formulated to provide good • Water Clean-Up - May be used in occupied areas When used on floors, this product
chemical, abrasion and impact resistance on a variety of commercial • Chemical Resistant - May be used in environments with moderately provides moderate- to heavy-
and industrial surfaces, including steel, iron, concrete, non-ferrous severe exposure duty protection in commercial
metals, wood and drywall. Particularly suited for use on concrete floors. • Superior Leveling - Smooth professional finish which environments exposed to frequent
is excellent for floors foot traffic and occasional traffic of
lightweight rubber-tired vehicles,
intermittent spillage of mild
chemicals, occasional steam cleaning
and powerwashing.
72 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Epoxies
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
BENJAMINMOORE.COM
Product Description Features/Benefits Notes
V450: Acrylic Epoxy is a two-component epoxy for use on properly • Abrasion Resistant Finish - Coated surfaces maintain a nice finish Industrial and institutional
prepared interior and exterior ferrous metal, galvanized metal, wood, • Low Odor - Can be used in areas where odor is a concern maintenance for walls subjected to
plaster, masonry and drywall surfaces that are subject to moderate • Chemical Resistant - Can be scrubbed pedestrian use in food and beverage
abrasion or mild chemical exposures. Not recommended as a heavy-duty • Gloss and Semi-Gloss Sheens Available (Catalyst Determines plants, hospitals, coastal structures
floor finish. Sheen Level) and hotels. Not a heavy-duty
industrial floor finish. Tints with
universal colorant.
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 73
†For the most up-to-date MPI specifications, visit www.mpi.net
Flooring Additives
Anti-Slip Aggregate
This specially formulated anti-slip aggregate is designed to elevate the foot or wheel on a damp or
wet surface, permitting the water to escape instead of causing the foot or wheel to hydroplane.
Key Advantages:
Compatible with all floor coatings.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1-2 lbs. per
V630 Anti-Slip Aggregate NA NA NA NA
100 sq. ft.
NA NA
V630: This specially formulated anti-slip aggregate is designed to • Hard, angular aggregate provides durability Silica free.
elevate the foot or wheel on a damp or wet surface, permitting the water • Excellent slip-resistant properties
to escape instead of causing the foot or wheel to hydroplane. • Lightweight aggregate can be broadcast by hand
• Particle size #16
74 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Urethanes
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
BENJAMINMOORE.COM
V510 Aliphatic Acrylic Urethane White
X 61.0% 12 hrs. 350-500 2.0-2.8 302 MPI #83, 174
Semi-Gloss (Tintable)
V510: Aliphatic Acrylic Urethane (Semi-Gloss) is a multi-use, two- • Superior Exterior UV Resistance - Lasting protection and service Not for immersion service. Tints with
component urethane appropriate for use on both metal and masonry and in exterior exposure IM colorant.
exhibiting outstanding resistance to the effects of sunlight and weather. • Highly Chemical Resistant - Allows for severe exposure
• Resists Gasoline and Skydrol - Allows for use on factory floors
and aircraft hangers
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Clear,
V515 Aliphatic Urethane Coating White, X 55.0% 4 hrs. 450-550 2.0-2.2 447 MPI# 78, 83*, 105, 205
Black
V515: Aliphatic Acrylic Urethane is a high-performance, two-component • Durable film offers gloss and color retention on exterior substrates Shop/OEM use only; not OTC
aliphatic acrylic polyurethane designed for shop/OEM use. • Excellent abrasion, chemical, and solvent resistance in industrial compliant. Tints with IM colorant.
applications *With anti-skid additive
• Balance of performance and price in a lower solids urethane
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 75
†For the most up-to-date MPI specifications, visit www.mpi.net
Urethanes
Polyester Urethane
Polyester Urethane is a multi-use, two-component product that provides excellent gloss and color
retention, as well as superior abrasion, chemical and solvent resistance. It may be used anywhere a
performance urethane is necessary for interior or exterior applications. Excellent flow and leveling. It is
ideal as a floor finish for commercial and industrial applications as well as airplane hangars.
Key Advantages:
Resistant to discoloration from tires. Good UV protection.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
White
V520 Polyester Urethane (Tintable) X 61.0% 8 hrs. 400-450 2.2-2.4 320
Waterborne Urethane
This coating produces an extremely durable, chemical-resistant surface with the benefits of low odor
and soap and water clean-up. Provides outstanding gloss retention and resists scratches and abrasion.
Key Advantages:
Low VOC and water clean-up. Outstanding UV protection. Quick return to service time for minimum
down time.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Clear, Qualifies for LEED® v4 Credit,
V540 Waterborne Urethane White NA 47.0% 3 hrs. 350-500 1.5-2.2 10 Qualifies for CHPS low emitting credit
V540: This coating produces an extremely durable, chemical-resistant • Superior Exterior UV Resistance - Lasting protection and service Coated surfaces may discolor under
surface with the benefits of low odor and soap and water clean-up. in exterior exposure tires due to plasticizer migration.
• Highly Chemical Resistant - For severe exposure
• Resists Gasoline and Skydrol - Allows for use on factory floors
and aircraft hanger
76 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Urethanes
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
BENJAMINMOORE.COM
Product Description Features/Benefits Notes
V580: This coating is a one-component, high-solids, moisture-cured • Fast Dry (1 Hour) - Allows for multiple coats in one day and quick A one-component product that
urethane intended for use on floors exposed to moderate to extreme return to service, saving time and money requires no catalyst/converter.
conditions. • Abrasion Resistant Finish - Long lasting finish for use on floors Do not use accelerators or converters
• Resists Spills and Chemical Splashes - Allows for use in moderately with this product. Exposure to UV
severe environments light may cause yellowing.
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 77
†For the most up-to-date MPI specifications, visit www.mpi.net
Specialty Products
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
V114: Acrylic Block Filler is a water reducible, heavy-duty, acrylic block • High solids, high moisture resistant Not for use on horizontal surfaces
filler formulated for interior or exterior use in conjunction with high- • Soap and water clean-up or immersion service.
performance coating systems.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
V163 Waterborne Epoxy Block Filler White NA 46.0% 16 hrs. 60-90 8.2-12.3 106
V163: Epoxy Block Filler is a high-solids epoxy block filler with high- • Extremely Water Resistant - May be used in wet environments like
performance features as well as soap and water clean-up. showers and car washes
• Water Clean-Up - Easier clean-up
78 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Specialty Products
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
BENJAMINMOORE.COM
Product Description Features/Benefits Notes
V157: Coal Tar Epoxy is a high-solids, two-component, tar-filled coating • Resists Alkalaids and Acids - Versatile for use in areas Designed for the waste water
formulated to provide excellent film build in one or two coats. with chemical spills treatment, chemical processing,
• May Be Used in Immersion Service - Required for waste water pulp and paper, and industrial
containment in water treatment facilities maintenance markets or anywhere
a tar filled polyamide epoxy is
required for excellent resistance
to water, chemicals and
underground exposures.
Rust Arrestor
Rust Arrestor is a water-based, film-forming primer that chemically transforms rust, halting the
corrosion process and enabling the surface to accept a topcoat. When applied over tightly adhering
rust, it forms a black, protective film.
Key Advantages:
Chemically converts rust to inhibit corrosion. Forms a tight chemical bond to rusted surfaces.
Can be top coated with latex, alkyd, urethane or epoxy finishes.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
V180: Rust Arrestor is a water-based, film-forming primer that • Chemically Bonds to Rust - Lasting protection and service Rust Arrestor works on rusted surfaces
chemically transforms rust, halting the corrosion process and enabling the • Water Clean-up - Easy to use and may be used in occupied areas only. If applied to non-rusted surfaces,
surface to accept a topcoat. allow 24 hour dry prior to re-coat.
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 79
†For the most up-to-date MPI specifications, visit www.mpi.net
Cleaning, Prep & Solvent Products
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
V610: Citrus Based Cleaner is an industrial strength cleaner based • Specific Cleaners for Each Surface - Each prep product is specifically Concentrated and designed
on a natural citrus by-product. designed for the right surface and project, making them more for water to be added based
efficient and effective on strength needed.
V620: Concrete & Masonry Etch is used for removing laitance and • Specific Cleaners for Each Surface - Each prep product is specifically Concentrated and designed
etching concrete. designed for the right surface and project, making them more for water to be added based
efficient and effective on strength needed.
80 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Cleaning, Prep & Solvent Products
Urethane Reducer
Urethane Reducer is 100% butyl acetate for use in thinning catalyzed acrylic urethanes. Effective for
cleaning equipment immediately after use as well. Do not use this product for cleaning synthetic
brushes or rollers, as it will dissolve them.
Key Advantages:
For use with all two-part, solvent-based urethane coatings. Effectively cleans tools and equipment.
May be used to reduce and thin coatings up to the legal limits allowed by district.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
BENJAMINMOORE.COM
Product Description Features/Benefits Notes
Brushing Reducer
Brushing Reducer is a blend of High Flash Naphtha and Mineral Spirits. Use this solvent to improve the
brushing characteristics of single-component, solvent-based coatings.
Key Advantages:
For use with all alkyd and oil-modified polyurethane coatings. Effectively cleans tools and equipment.
May be used to reduce and thin coatings up to the legal limits allowed by district.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 81
†For the most up-to-date MPI specifications, visit www.mpi.net
Cleaning, Prep & Solvent Products
Xylene
Xylene is an aromatic solvent that can be used in numerous industrial coatings systems as a general
thinner and clean-up solvent. Use to modify evaporation rates and improve dry. For effective cleaning
of tools and equipment.
Key Advantages:
Evaporation rate faster than Mineral Spirits but slower than that of Epoxy Thinner.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Epoxy Thinner
Epoxy Thinner is a carefully balanced combination of the proper solvents for reducing catalyzed
epoxy primers and finish coats.
Key Advantages:
Use for clean-up of equipment after use of polyamide epoxy.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
V705: Alkyd Gloss and Hardness Catalyst speeds drying while producing a Hardens Alkyd Finishes - Allows alkyd finishes to dry faster and
higher gloss and more corrosion resistance, as well as a harder enamel finish. with harder finishes making them more durable
82 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
CORONADO®
Interior Paint
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
701 Coronado Grand® Acrylic Paint White 1-4 38.6% 1-2 hrs. 400-450 1.5 <50 Qualifies for LEED® Credit
& Primer Matte Finish
702 Coronado Grand® Acrylic Paint White 1-4 34.8% 1-2 hrs. 400-450 1.3-1.4 <50 Qualifies for LEED® Credit
& Primer Eggshell Finish
704 Coronado Grand® Acrylic Paint White 1-4 36.0% 1-2 hrs. 400-450 1.3-1.4 <50 Qualifies for LEED® Credit
& Primer Semi-Gloss Finish
701, 702, 704: A high-quality, low-VOC, acrylic paint and primer that • Paint & Primer Together - Saves time Do not apply when air and surface
is engineered to provide excellent washability. It is easy to apply and dries • Excellent Flow & Leveling - Smooth professional finish temperatures are below 50°F (10°C).
to a smooth professional finish. • Low VOC
84 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Interior Paint
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
24 Tough Walls Acrylic Paint & Primer White 1-4 34.8% 4 hrs. 350-450 1.3-1.7 45 Qualifies for LEED® Credit
Flat
34 Tough Walls Acrylic Paint & Primer White 1-4 36.4% 4 hrs. 350-450 1.2-1.5 94 Qualifies for LEED® Credit
Eggshell
60 Tough Walls Acrylic Paint & Primer White 1-4 32.5% 4 hrs. 350-450 1.2-1.5 93 Qualifies for LEED® Credit
Satin
22 Tough Walls Acrylic Paint & Primer White 1-4 32.0% 4 hrs. 350-450 1.1-1.5 98 Qualifies for LEED® Credit
Semi-Gloss
CORONADOPAINT.COM
Coronado®
Product Description Features/Benefits Notes
16: This line dries to a very flat finish, which lends itself to excellent • Resists stains Apply only when surface and air
touch-up. The durable acrylic film resists stains and repeated washings, • Excellent hiding temperatures are above 50°F (10°C).
and is excellent for use in high traffic areas. • Washable
• Low odor
• Spatter resistant
24: While Tough Walls appears a rich flat, when viewed at an angle a hint • Resists stains Apply only when surface and air
of soft luster can be detected. This subtle velvet sheen is what gives Tough • Excellent hiding temperatures are above 50°F (10°C).
Walls its extreme stain resistance, washability and rich appearance. • Washable
• Low odor
• Spatter resistant
34: Tough Walls Latex Eggshell Enamel has a soft velvet sheen that dries • Scrubbable Apply only when surface and air
to a durable, smooth finish. It exhibits excellent dirt and stain resistance • Soft velvet sheen temperatures are above 50°F (10°C).
and washes like an enamel without harm to the finish. • High hiding
• Low odor
• Spatter resistant
60: Tough Walls Satin Enamel represents the latest in advanced acrylic • Scrubbable Apply only when surface and air
formulating technology. The satin finish is extremely stain resistant for • Resists stains temperatures are above 50°F (10°C).
ease of cleaning maintenance. • Low odor
• Spatter resistant
• Professional satin finish
22: Tough Walls Semi-Gloss Enamel incorporates the latest in advanced • Scrubbable Apply only when surface and air
acrylic formulating technology. The rich, semi-gloss finish is extremely • Resists stains temperatures are above 50°F (10°C).
stain resistant for easy cleaning maintenance. • Goes on smoothly
• Spatter resistant
• Fast dry
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 85
†For the most up-to-date MPI specifications, visit www.mpi.net
Interior Paint
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
23 Tough Walls Alkyd Semi-Gloss White 1 50.5% 8 hrs. 350-450 1.8-2.3 369
Enamel
23: This Alkyd Semi-Gloss enamel is designed to give excellent service in • Scrubbable Apply only when surface and air
areas that require frequent washing. It forms a tough, durable film that is • Resists stains temperatures are above 50°F
ideal for coating kitchens, bathrooms, laundries, entryways or other high • Tough, durable film (10°C). Do not use as a house
traffic areas. paint on siding.
86 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Interior Paint
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC* Specifications†
gm./l.
CORONADOPAINT.COM
Coronado®
Product Description Features/Benefits Notes
501: Designed to provide excellent coverage and a decorative flat • Zero VOC* Do not apply when air and surface
finish. It is easy to apply and well suited for low abuse interior wall and • Excellent coverage temperatures are below 50°F (10°C)
ceiling surfaces. • Low odor
• Spatter resistant
• Excellent touch-up
502: Designed to provide excellent coverage and a washable eggshell • Zero VOC* Do not apply when air and surface
finish. It applies easily without spattering. • Excellent coverage temperatures are below 50°F (10°C)
• Low odor
• Spatter resistant
• Washable
503: Designed to provide excellent coverage and a pleasant satin sheen. • Zero VOC* Do not apply when air and surface
It applies easily and is ideal for trim applications, bathrooms, family rooms • Excellent coverage temperatures are below 50°F (10°C)
and other rooms where routine cleaning is needed. • Scrubbable
• Quick dry
504: Designed to provide excellent coverage and a pleasant semi-gloss • Zero VOC* Do not apply when air and surface
sheen. It applies easily and is ideal for trim applications, bathrooms, family • Excellent coverage temperatures are below 50°F (10°C)
rooms and other rooms where routine cleaning is needed. • Scrubbable
• Quick dry
*Zero VOC according to EPA method 24 when tinted with Benjamin Moore® Color Preview® zero VOC colorants.
Colorants other than Benjamin Moore® Color Preview® added to this base paint may increase VOC level significantly depending on color choice.
**When tinted with Benjamin Moore® Color Preview® zero VOC colorants.
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 87
†For the most up-to-date MPI specifications, visit www.mpi.net
Interior Paint
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
28 Super Kote 5000® Acrylic Latex White, 1-4 32.1% 4 hrs. 300-400 1.3-1.7 35 Qualifies for LEED® Credit, MPI 53
Flat Wall Paint Colors
30 Super Kote 5000® Acrylic Latex White 1-4 32.0% 4 hrs. 300-400 1.3-1.7 41 Qualifies for LEED® Credit, MPI 44
Eggshell Wall Paint
32 Super Kote 5000® Acrylic Latex White 1-4 32.4% 4 hrs. 300-400 1.3-1.8 45 Qualifies for LEED® Credit, MPI 54
Semi-Gloss Wall Paint
1130 Super Kote 5000® Acrylic Latex White 1-4 31.9.% 4 hrs. 300-400 1.3-1.7 95 Qualifies for LEED® Credit, MPI 44
Low-Sheen Eggshell Wall Paint
1160 Super Kote 5000® Acrylic Latex White 1-4 32.8% 4 hrs. 350-450 1.2-1.5 93 Qualifies for LEED® Credit, MPI 43
Satin Wall Paint
28: Designed especially for the professional applicator to cover most • Professional finish May be applied when surface and air
surfaces in one coat when applied at the proper spread rate. This latex flat • Spatterless temperatures are between 40°F
is spatterless and exhibits excellent touch-up characteristics. • Water clean up and 90°F (4.4°C and 32.2°C).
• Fast drying
• Low odor
30: Designed to be applied with equal success by contractors or do-it- • Washable Apply only when surface and air
yourselfers. It applies easily without spattering, covers most surfaces in • Spatterless temperatures are above 50°F
one coat and may be washed repeatedly without film damage. • Fast drying (10°C). Do not apply outdoors
• Water clean up
• Easy application if rain is threatening.
32: Suited for wall and trim applications in kitchens, bathrooms, family • Scrubbable Apply only when surface and air
rooms, hallways and bedrooms where routine cleaning is needed. • Fast drying temperatures are above 50°F
Fast dry, low odor and pleasant semi-gloss sheen make it an ideal • Low odor (10°C). Do not apply outdoors
• Water clean up
finish for residential or commercial jobs. • Spatterless if rain is threatening.
1130: Designed to be applied with equal success by contractors or do-it- • Washable May be applied when surface and air
yourselfers. It applies easily without spattering, covers most surfaces in • Spatterless temperatures are between 40°F
one coat and may be washed repeatedly without film damage. • Water clean up and 90°F (4.4°C and 32.2°C).
• Fast drying
• Low odor
1160: Suited for wall and trim applications in kitchens, bathrooms, family • Scrubbable May be applied when surface and air
rooms, hallways and bedrooms where routine cleaning is needed. Fast dry, • Fast drying temperatures are between 40°F
low odor and a pleasant satin sheen make it an ideal finish for residential • Water clean up and 90°F (4.4°C and 32.2°C).
• Professional satin finish
or commercial jobs.
88 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Interior Paint
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
301 Super Kote® 3000 Acrylic Latex White X 29.1% 4 hrs. 350-450 1.1-1.3 42 Qualifies for LEED® Credit
Paint Flat
302 Super Kote® 3000 Acrylic Latex White X 30.2% 4 hrs. 300-400 1.2-1.6 44 Qualifies for LEED® Credit
Paint Eggshell
304 Super Kote® 3000 Acrylic Latex White X 28.9% 4 hrs. 300-400 1.2-1.5 94 Qualifies for LEED® Credit
Paint Semi-Gloss
301: A Flat paint designed to provide excellent hide when applied to • Fast drying Apply only when surface and air
properly prepared interior surfaces as well as clean exterior masonry surfaces. • Hides imperfections temperatures are above 50°F (10°C).
CORONADOPAINT.COM
• Low odor Not for use in high abuse areas.
• Excellent touch-up
Coronado®
302: This Latex Enamel Eggshell is designed particularly for the • Fast drying Apply only when surface and air
professional contractor. The formulation provides that necessary • Low sheen temperatures are above 50°F (10°C).
balance between performance and value. • Low odor
• Washable
304: A professional grade Acrylic Latex Semi-Gloss Enamel that • Washable Apply only when surface and air
exhibits good washing characteristics. May be applied on walls and trim • Low odor temperatures are above 50°F (10°C).
in kitchens, hallways, bathrooms or other areas where routine • Semi-gloss sheen
• Fast drying
maintenance is required. • Water clean up
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 89
†For the most up-to-date MPI specifications, visit www.mpi.net
Interior Paint
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
88 Super Kote® 1000 Latex Flat White 22.5% 4 hrs. 300-400 1.0-1.2 31
88: This Latex Flat Coating is designed to provide good dry hide and a • Fast dry Apply only when surface and air
smooth flat finish when applied to properly prepared surfaces. It is easy to • Low odor temperatures are above 50°F (10°C).
apply and exhibits good touch-up properties. • Water clean up Not for use in high abuse areas that
• Resists spattering are frequently washed or scrubbed.
90 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Primers
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
40 Super Kote 5000® Acrylic Latex White NA 31.9% 4 hrs. 350-450 1.1-1.5 44 Qualifies for LEED® v4 Credit**; MPI 50,
Primer Qualifies for CHPS low emitting credit
CORONADOPAINT.COM
Super Kote® 3000 Acrylic Latex Primer
Coronado®
High-hiding, easy-to-apply primer optimized for high productivity jobs.
Key Advantages:
Strong foundation for interior drywall and cured plaster with good touch-up.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
948 Super Kote® 3000 Interior Primer White NA 32.0% 4 hrs. 350-450 1.1-1.5 45 Qualifies for LEED® Credit
948: A high-hiding, fast-drying Acrylic Latex Primer-Sealer for interior • Fast drying Apply only when surface
dry wall and cured plaster. It is easy to apply, low in odor and quick drying. • Low odor temperature is above 50°F (10°C).
It provides an excellent foundation for latex or oil finish coat systems. • Excellent sealing
• Water clean up
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 91
†For the most up-to-date MPI specifications, visit www.mpi.net
Exterior Paint
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
10 Cryli Cote® 100% Acrylic Exterior White 1-4 35.0% 4 hrs. 300-400 1.4-1.9 44 MPI 10
Paint Flat
410 Cryli Cote® 100% Acrylic Exterior White 1-4 38.3% 4 hrs. 350-450 1.4-1.8 83
Paint Satin
2 Cryli Cote® 100% Acrylic Exterior White 1-4 33.8% 4 hrs. 325-425 1.3-1.7 94
Paint Semi-Gloss
10: A 100% acrylic flat exterior paint which provides lasting service • Excellent color retention May be applied when surface and air
over new or previously painted surfaces in good condition. It delivers • Fast dry temperatures are between 40°F and
a durable and protective finish on any properly prepared and primed • Pleasing flat sheen 90°F (4.4°C and 32.2°C). Do not apply if
• Durable, professional-looking finish rain is threatening.
exterior surface.
410: Cryli Cote® 100% Acrylic Exterior Paint Satin provides tenacious • Superb color retention May be applied when surface and air
adhesion to a variety of substrates. It is blister resistant, exhibits excellent • Excellent durability temperatures are between 40°F and
durability and superb color retention. • Fast dry 90°F (4.4°C and 32.2°C). Do not apply if
• Blister resistant rain is threatening.
2: Cryli Cote® 100% Acrylic Exterior Paint Semi-Gloss provides a durable and • Superb color retention Avoid painting over hot surfaces or in
protective finish on properly primed and prepared exterior surfaces. This • Excellent durability direct sunlight. Apply when surface
Semi-Gloss Acrylic finish provides outstanding gloss and color retention. • Fast dry temperature is above 50°F (10°C).
• Blister resistant Do not apply if rain is threatening.
92 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Exterior Paint
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
801 Super Kote 5000® Exterior Flat White 1-4 32.0% 4 hrs. 300-400 1.3-1.7 44 MPI 10
803 Super Kote 5000® Exterior Satin White 1-4 32.5% 4 hrs. 350-450 1.2-1.5 88
804 Super Kote 5000® Exterior White 1-4 30.2% 4 hrs. 300-400 1.2-1.6 93
Semi-Gloss
801: Designed for service over new or previously painted surfaces • Fast drying Apply only when surface and air
in good condition. • Low odor temperatures are above 50°F (10°C).
• Excellent sealing
CORONADOPAINT.COM
Dries dust and bug free in thirty minutes.
• Water clean up Provides a durable and protective finish
Coronado®
on any properly primed and prepared
exterior surface.
803: Provides lasting service over new or previously painted surfaces • Fast dry Apply only when surface and air
in good condition. The acrylic latex paint will provide a durable and • Blister resistant temperatures are above 50°F (10°C).
protective finish on any properly prepared and primed exterior surface. • Excellent color retention
• Durable
804: Formulated to provide long lasting weather, color and gloss • Fast drying Apply only when surface and air
retention. The enamel sheen minimizes dirt pickup, so the film stays • Low odor temperatures are above 50°F (10°C).
fresh looking longer. • Excellent sealing Do not apply to hot surfaces or in direct
• Water clean up sunlight. Do not apply if rain is threatening.
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 93
†For the most up-to-date MPI specifications, visit www.mpi.net
Rust Preventive
& Waterborne Enamels
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
80 Rust Scat® Waterborne Acrylic White, 1-4 36.1% 2 hrs. 350-450 1.3-1.7 224 Qualifies for LEED® Credit when used
Enamel Gloss Colors over interior metal, MPI 114 & 154
90 Rust Scat® Waterborne Acrylic White, 1-4 38.0% 4 hrs. 350-450 1.4-1.7 134 Qualifies for LEED® Credit when used
Enamel Semi-Gloss Colors over interior metal, MPI 153
36 Rust Scat® Waterborne Acrylic White N/A 41.6% 2-4 hrs. 350-450 1.5-1.9 206 Qualifies for LEED® Credit when used
Primer over interior metal, MPI 107
80: Rust Scat® Gloss Acrylic Enamel is an interior/exterior finish, • Excellent color and gloss retention Apply at temperatures between 50°F and
which is suitable for coating primed metal, wood or masonry surfaces. • Fast dry 90°F (10°C to 32.2°C). Not intended for
• Superior leveling immersion service. Does not fight rust.
• Soap and water cleanup
90: Rust Scat® Semi-Gloss Acrylic Enamel is an interior/exterior • Excellent color and gloss retention Apply at temperatures between 50°F and
finish suitable for coating primed metal, wood or masonry surfaces. • Fast dry 90°F (10°C to 32.2°C). Do not use as a house
It is water thinned so it poses no fire hazard or objectionable odor. • Superior leveling paint on wood siding. Not recommended
• Smooth, semi-gloss finish for unprimed wood and metal, immersion
service or high corrosion areas. Does not
fight rust.
36: This is a water reducible Acrylic Metal Primer for coating steel, • Controls rust on ferrous metal Apply at temperatures between 50°F and
pre-engineered metal building parts and other steel that is exposed to a • Top coat with oil, alkyd or latex paints 90°F (10°C to 32.2°C). Not recommended for
normal commercial or residential environment. • Excellent choice for galvanized metal immersion service. This product is suitable
for use in USDA Inspected facilities.
94 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Rust Preventive
& Waterborne Enamels
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
31 Rust Scat® Polyurethane White, 1-4 48.7% 24 hrs. 300-400 2.0-2.6 393 MPI 48
Enamel Gloss Colors
13 Rust Scat® Polyurethane White 1-4 49.5% 24 hrs. 300-400 2.0-2.6 392
Enamel Semi-Gloss
651 Rust Scat® Polyurethane White, 1-4 50.7% 24 hrs. 300-400 2.0-2.7 383
Enamel Satin Colors
White,
35 Rust Scat® Alkyd Metal Primer Red N/A 56.2% 24 hrs. 400-500 1.8-2.2 336 MPI 23 & 79
CORONADOPAINT.COM
Product Description Features/Benefits Notes
Coronado®
31: Coronado® Rust Scat® Polyurethane Enamel is designed as a rust • Quick drying Apply only when surface and air temperatures are
preventive coating for metal substrates. It is easy to apply, has tenacious • Controls rust between 45°F and 95°F (7.2°C to 35°C). Do not apply
adhesion, has excellent wetting properties and exhibits an excellent • Dries to a smooth gloss finish if rain is threatening or if the temperature is within
appearance once cured. Interior and exterior. • Tenacious adhesion 5 degrees of the dew point and falling. Do not apply
directly to Galvanized metal.
13: A Semi-Gloss Polyurethane Enamel designed to give excellent • Quick drying Apply only when surface and air temperatures
service in areas that require frequent washing. It forms a tough, durable • Controls rust are between 45°F and 95°F (7.2°C to 35°C). Do not
film that is ideal for coating metal substrates in kitchens, bathrooms, • Non-chalking apply if rain is threatening or if the temperature is
laundries, entryways or other high traffic areas. • Tenacious adhesion within 5 degrees of the dew point and falling. Not
recommended for immersion service.
651: Rust Scat® Polyurethane Satin Enamel is designed as a rust • Quick drying Apply only when surface and air temperatures
preventive coating for ferrous metal. The rich satin sheen hides many • Controls rust are between 45°F and 95°F (7.2°C to 35°C). Do not
surface imperfections, while maintaining the durability of hard enamel. • Rich satin sheen apply if rain is threatening or if the temperature is
• Tenacious adhesion within 5 degrees of the dew point and falling. Not
recommended for immersion service.
35: An alkyd metal primer for industrial or commercial use on moderate • Controls rust on ferrous metals Do not paint when the temperature is within 5
to severe atmospheric service. Excellent wetting properties provide • Excellent wetting properties degrees of the dew point and falling, to avoid
penetration and bonding on hand or power tool cleaned surfaces. • Superb bonding condensation. Not recommended for immersion
service. Do not use on galvanized metals.
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 95
†For the most up-to-date MPI specifications, visit www.mpi.net
Masonry Coatings
Masonry Coatings
A collection of an exterior hardscape waterproofer, exterior silicone-based water-repellent and sealer,
and interior production block filler.
Key Advantages:
The acrylic masonry waterproofer can be applied to high pH (new) concrete without a primer
or conditioner.
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Qualifies for LEED® v4 Credit,
958-11 Super Kote 5000® Production White NA 49.1% 8 hrs. 75-100 7.9-10.5 35 MPI 4, 4 X-Green™, Qualifies for
Block Filler CHPS low emitting credit
194 Texcrete® Silicone Water Repellent Clear NA 13.7% NA 100-250 NA 21 MPI 117
3196 Texcrete® WB Acrylic Masonry White NA 53.0% 4 hrs. 90-110 8.5 20 MPI 42
Waterproofer Medium Finish
194: Coronado® Texcrete® Silicone Water Repellent is a ready-to-use • Waterborne for easy cleanup Apply only when surface, material and ambient
high-performance, breathable, clear silicone-type water repellent sealer • Quick drying temperatures are between 50°F and 90°F. Do not
for masonry. It penetrates deep into masonry surfaces forming a strong • Penetrates deep into masonry apply if temperatures are expected to fall below
bond without changing the natural appearance of the substrate. 40°F within 4 hours of application or if rain or
other precipitation is expected within 24 hours.
3192: Coronado® Texcrete® WB Acrylic Masonry Waterproofer Sand Finish • High build May be applied to cured or uncured (green)
is a high-build, low VOC, breathable waterproofing coatings, designed for • For tilt-up, pre-cast, CMU, stucco and concrete in temperatures ranging from 35°F up
application by the professional contractor to above-grade concrete and Other vertical masonry surfaces to 95°F.
masonry structures. • Can be applied to new concrete
• Resists salt spray, wind-driven rain and uv rays
3194: Coronado® Texcrete® WB Acrylic Masonry Waterproofer Smooth • High build May be applied to cured or uncured (green)
Finish is a high-build, low VOC, breathable waterproofing coatings, • For tilt-up, pre-cast, CMU, stucco and concrete in temperatures ranging from 35°F
designed for application by the professional contractor to above-grade other vertical masonry surfaces up to 95°F.
concrete and masonry structures. • Can be applied to new concrete
• Resists salt spray, wind-driven rain and uv rays
3196: Coronado® Texcrete® WB Acrylic Masonry Waterproofer Medium • High build May be applied to cured or uncured (green)
Finish is a high-build, low VOC, breathable waterproofing coatings, • For tilt-up, pre-cast, CMU, stucco and concrete in temperatures ranging from 35°F
designed for application by the professional contractor to above-grade other vertical masonry surfaces up to 95°F.
concrete and masonry structures. • Can be applied to new concrete
• Resists salt spray, wind-driven rain and uv rays
96 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Masonry Coating
Code Product Colors Bases Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Elastite® 10 Mil 100% Acrylic Elastomeric
160 White N/A 53 ± 1.0% 4 hrs. 160-175 4.8-5.3 47
Waterproof Coating
Elastite® 20 Mil 100% Acrylic Elastomeric
162 White N/A 54 ± 1.0% 6 hrs. 75-85 10.2-11.3 47
Waterproof Coating
Elastite® SUPER-STRETCH 20 Mil 100%
166 White N/A 52 ± 1.0% 6 hrs. 75-85 10-11 48 MPI# 38
Acrylic Elastomeric Waterproof Coating
1066 Elastite® 100% Acrylic Masonry Sealer Clear N/A 21 ± 1.0% 2 hrs. 280-340 1-1.2 142
CORONADOPAINT.COM
Product Description Features/Benefits Notes
Coronado®
160: Elastite® 10 Mil 100% Acrylic Elastomeric Waterproof Coating is a new • Keeps damaging water out including wind-driven rain Apply only if temperatures are
technology elastomeric membrane coating designed to keep damaging • Permeable enough to allow moisture vapor to escape the structure between 45°F and 95°F, and in
humidities less than 90%. Do not apply
water out of commercial and residential structures. This product is if ambient and substrate temperatures
designed to be applied at 10 mils wet, and has a 200% elongation rating.
are within 5 degrees of the dew point
and falling. Do not apply if rain is
expected within 12 hours.
162: Elastite® 20 Mil 100% Acrylic Elastomeric Waterproof Coating is a new • Keeps damaging water out including wind-driven rain Apply only if temperatures are
technology elastomeric membrane coating designed to keep damaging • Permeable enough to allow moisture vapor to escape the structure between 45°F and 95°F, and in
• Flexible down to 0°F humidities less than 90%. Do not apply
water out of commercial and residential structures. This product is if ambient and substrate temperatures
designed to be applied at 20 mils wet, and has a 220% elongation rating. are within 5 degrees of the dew point
and falling. Do not apply if rain is
expected within 12 hours.
166: Elastite® SUPER-STRETCH 20 Mil 100% Acrylic Elastomeric Waterproof • Keeps damaging water out including wind-driven rain Apply only if temperatures are
Coating is a new technology elastomeric membrane coating designed • Permeable enough to allow moisture vapor to escape the structure between 45°F and 95°F, and in
• Flexible down to 0°F humidities less than 90%. Do not apply
to keep damaging water out of commercial and residential structures. if ambient and substrate temperatures
This product is designed to be applied at 20 mils wet, and has a 450% are within 5 degrees of the dew point
elongation rating. and falling. Do not apply if rain is
expected within 12 hours. Not intended
for horizontal surfaces.
1066: Elastite® 100% Acrylic Masonry Sealer is a penetrating surface • Provides a strong foundation Apply only if temperatures are
sealer and chalk binder designed for all types of masonry substrates. When • May be applied to new masonry with a pH up to 13 between 45°F and 95°F, and in
humidities less than 90%. Do not apply
applied properly, this product will provide a sound foundation for acrylic if ambient and substrate temperatures
house paints, and elastomeric waterproofing finishes. are within 5 degrees of the dew point
and falling. Do not apply if rain is
expected within 12 hours.
48: Elastite® 100% Acrylic Masonry Sealer is designed to penetrate • Excellent chalk binding sealer Do not apply if air or surface
deeply into the pores of masonry surfaces to stop dusting and to form • Resistant to the effects of alkali up to a pH of 13 temperature is below 50°F and above
95°F. Do not apply if rain is threatening.
a foundation to support the Elastite® Coating System.
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 97
†For the most up-to-date MPI specifications, visit www.mpi.net
Specialty Coatings
Specialty Products
High touch-up, flat interior paint, ceiling white, and a multipurpose latex primer round out the Coronado
product portfolio.
Key Advantages:
FinalTouch Flat Wall Paint is designed for professional painters to touch-up a job and move on,
with no fear of a gloss or sheen change.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
White,
62 FinalTouch® Flat Wall Paint Colors 1-2 32.9% 4 hrs. 300-400 1.3-1.8 94
4 Optimum Hide® Low Odor White NA 38.2% 2-3 hrs. 300-400 1.5-2.0 95
Ceiling White
116 Grip & Seal Latex Stain Blocker White NA 40.5% 1-2 hrs. 300-400 1.6-2.2 45 Qualifies for LEED® Credit , MPI 50
4: Coronado® Optimum Hide® Low Odor Ceiling White provides high-hide • Exceptional Hiding Power Do not apply when air, product
application and a uniform flat finish that minimizes surface imperfections. • Uniform Flat Finish or surface temperature is below 40°F.
This product exhibits very low odor during application and dries • Dries in Minutes
• Spatter Resistant
in 30 minutes. • Low Odor
116: Coronado® Grip & Seal Latex Stain Blocker provides excellent • Superior Adhesion Use only as a spot primer on
adhesion properties to a variety of interior & exterior surfaces. It is an • Seals Common Stains exterior surfaces. Not for whole-house
excellent base coat for both latex and oil-based finish coatings. • Quick Recoat Time exterior use.
• Provides a Mildew-Resistant Coating
98 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Specialty Coatings
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
105 Super Kote 5000® White NA 36.3% 4 hrs. 300-400 1.5-1.9 364 MPI 55
Dry Fall Alkyd Flat
N110 Super Kote 5000® White, NA 41.1% 4 hrs. 375-475 1.1-1.7 46 Qualifies for LEED® Credit, MPI 118
Dry Fall Latex Flat Black
112 Super Kote 5000® White NA 35.8% 4 hrs. 375-475 1.2-1.5 67 Qualifies for LEED® Credit, MPI 226
Dry Fall Latex Semi-Gloss
105: Designed for the professional spray applicator for use in airless or • Spray application May be applied when surface and air
• Reduce cost of masking and covering temperatures are between 40°F and
CORONADOPAINT.COM
conventional spray equipment. Atomized spray and bounce back flash dry
within an eight-foot fallout. • Recoat in 4 hours 90°F (4.4°C and 32.2°C). For spray
Coronado®
application. Not for galvanized metal.
N110: Formulated for spray application to interior ceilings, walls and • Spray application May be applied when surface and air
structural members in commercial and institutional buildings. • Reduce cost of masking and covering temperatures are between 40°F and
The overspray dries to a dust before reaching the floor. This feature • Recoat in 4 hours 90°F (4.4°C and 32.2°C). For spray
reduces the cost of masking and covering procedures. application. Not for galvanized metal.
112: Formulated for spray application to interior ceilings, walls • Scrubbable May be applied when surface and air
and structural members in commercial and institutional buildings. • Fast drying temperatures are between 40°F and
The overspray dries to a dust before reaching the floor. This feature • Low odor 90°F (4.4°C and 32.2°C). For spray
reduces the cost of masking and covering procedures. • Water clean up application. Not for galvanized metal.
• Spatterless
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 99
†For the most up-to-date MPI specifications, visit www.mpi.net
Specialty Coatings
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
908 Super Kote 5000® White NA 48.7% 4-6 hrs. 100-200 Varies 45 Qualifies for LEED® Credit
Acrylic Knock Down Flat
918 Super Kote 5000® White NA 47.5% 4-6 hrs. 100-200 Varies 46 Qualifies for LEED® Credit
Acrylic Knock Down Satin
908: Decorative water-based textured wall finish that hides wear and • High solids Do not apply when the surface or air
tear while allowing water vapor to pass through. • Durable acrylic finish temperatures are below 50°F (10°C).
• Custom finished effects
918: Decorative water-based textured wall finish that hides wear and • Low-lustre satin finish
tear while allowing water vapor to pass through. • Durable acrylic finish
• Allows textured finishes to be created
100 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Exterior Stains
Code Product Colors Bases Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Tint, Deep,
2000 Acrylic Latex Solid Color Siding Stain Colors
Neutral 32.1% 4 hrs. 300-400 1.3-1.7 144 MPI# 16
Tint, Deep,
8500 100% Acrylic Solid Color Deck Stain Colors
Neutral 38.0% 4 hrs. 350-450 1.4-1.7 175
Clear,
7400 WB Alkyd Translucent Deck & Siding Stain Colors
N/A 21.8% <15 mins. 100-300 N/A 180
Clear,
7300 Alkyd Translucent Deck & Siding Stain Colors
N/A 30.5% <15 mins. 150-400 N/A 541
Clear,
7300 Alkyd Translucent Deck & Siding Stain Colors
N/A 59.0% <15 mins. 200-400 N/A 235
CORONADOPAINT.COM
Coronado®
7500 Alkyd Semi-Transparent Deck & Siding Stain Colors Clear 30.6% <15 mins. 150-400 N/A 542
7500 Alkyd Semi-Transparent Deck & Siding Stain Colors Clear 54.7% <15 mins. 200-400 N/A 229
800 Oil Deck & Siding Primer White N/A 55.3% 12-24 hrs. 350-450 2.0-2.5 349 MPI# 5
8500: Specially formulated stain for use on new or previously coated • Withstands Heavy Foot Traffic
exterior wood decks. Its new generation acrylic formula provides • Mildew Resistant Finish
unequaled ruggedness and durability.
7400: Translucent stain for accentuating the natural beauty of unpainted • Accentuates the Grain Lines and Textures of Unpainted Exterior This is a Wet-On-Wet Application
exterior wood. Wood - Provides protection with subtle beauty product. A second coat must be
• Formulated with Advanced Waterborne Alkyd Technology - applied within 15 minutes!
Penetrating performance with water cleanup
7300: Translucent stain for accentuating the natural beauty of unpainted • Designed for Use on All Types of Exterior Wood Substrates - This is a Wet-On-Wet Application
exterior wood. Beautifies and tones different types of wood product. A second coat must be
• Deep Penetration Due to Solvent-Based Formula applied within 15 minutes!
7600: Semi-Transparent stain with deep penetrating pigments that tone • Designed for Use on All Types of Exterior Wood Substrates - This is a Wet-On-Wet Application
wood adding subtle highlights to the appearance of the wood without Beautifies and tones different types of wood product. A second coat must be
concealing the beauty of the natural wood grain and texture. • Formulated with Advanced Waterborne Alkyd Technology - applied within 15 minutes!
Penetrating performance with water cleanup
7500: Semi-Transparent stain with deep penetrating pigments that tone • Withstands Heavy Foot Traffic This is a Wet-On-Wet Application
wood adding subtle highlights to the appearance of the wood without • Mildew Resistant product. A second coat must be
concealing the beauty of the natural wood grain and texture. applied within 15 minutes!
800: Exterior Oil Primer is a mixture of linseed oil and alkyd resins and • Deep Penetration Due to Solvent-Based Formula - Good adhesion This is a Wet-On-Wet Application
blocks tannin, water, rust and other stains on new and previously painted by top coats product. A second coat must be
exterior wood substrates – including hardboard. • Formula Contains Linseed Oil and Alkyd Resins - Seals the surface applied within 15 minutes!
being coated and blocks stains
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 101
†For the most up-to-date MPI specifications, visit www.mpi.net
Insl-x®
www.insl-x.com
Primers
Insl-x Primers
Interior and exterior primers to meet a variety of needs. From multi-purpose water and solvent-based
primers to superior stain suppressing primers, Insl-x is known for quality everyday and specialty primers.
Key Advantages:
Insl-x primers have formulas focused on solving specific issues. Almost any priming need can be
solved by using one of these Insl-x primers.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
White,
AQ-0400 Aqua Lock® Plus Black
NA 40.5% 1-2 hrs. 300-400 1.6-2.2 45 Qualifies for LEED® Credit, MPI 39
Deep Tint
AQ-0577 Aqua Lock® Plus Primer
NA 40.5% 1-2 hrs. 300-400 1.6-2.2 47 Qualifies for LEED® Credit
PS-8000 Prime Lock Plus White NA 56.2% 1-2 hrs. 300-350 2.6-3.0 337 MPI 69
NO-4000 Odor Less White NA 56.9% 2 hrs. 325-425 2.1-2.8 343 MPI 45, 136
IL-6800 Seal Lock® Plus White NA 41.3% 2 hrs. 300-400 1.7-2.2 338
TB-1100 Block Out® Exterior Primer White NA 37.7% 4 hrs. 300-400 1.5-2.0 93 MPI 6
INSL-X.COM
Insl-x®
Product Description Features/Benefits Notes
AQ-0400: White Aqua Lock® Plus Acrylic Primer, Sealer, Stain Blocker • Good Adhesion to Many Surfaces - Provides a consistent final finish Apply when surface and ambient
is a 100% acrylic formulated primer that provides excellent adhesion • Blocks Stains of Most Types - Prevents stains from damaging the temperature is above 50°F (12.8°C) and
properties to a variety of interior and exterior surfaces. final paint appearance below 90°F (32°C). Not for use
• Excellent Base Coat for Both Latex and Oil-Based Top Coats - on floors or pressure treated decks.
Useful for almost all painting projects Not for whole house exterior use.
AQ-0577: Deep Tint Base Aqua Lock® Plus Acrylic Primer, Sealer, • Good Adhesion to Many Surfaces - Provides a consistent final finish Apply when surface and ambient
Stain Blocker is a 100% acrylic formulated primer that provides excellent • Blocks Stains of Most Types - Prevents stains from damaging the temperature is above 50°F (12.8°C)
adhesion properties to a variety of interior and exterior surfaces. final paint appearance and below 90°F (32°C). Not for use
• Excellent Base Coat for Both Latex and Oil-Based Top Coats - on floors or pressure treated decks.
Useful for almost all painting projects Not for whole house exterior use.
PS-8000: Prime Lock Plus Alkyd Primer/Sealer is a high-hiding, • Blocks Stains of All Types - One primer for multiple problems Do not apply at temperatures below
alkyd resin-based, primer, sealer, stain blocker for interior use and • Excellent Enamel Holdout - Top coats look smooth and even 45°F (7.2°C)
exterior spot priming. • Excellent Base Coat for Both Latex and Oil-Based Top Coats -
Useful for almost all painting projects
NO-4000: Odor Less primer is a virtually odorless, special solvent- • Low Odor - Quick return to service Do not apply if the surface, material or
based, quick drying sealer which is effective over a broad spectrum of • Blocks Most Types of Stains - Prevents stains from bleeding ambient temperature is below 45°F. Do not
stains including many which are difficult to seal with a water-based through the finish coat use as a house paint primer on siding, or as a
• Low Odor Formulation for Situations Where Odor is a Concern full house exterior primer on any substrate.
stain suppressor.
IL-6800: Seal Lock® Plus is an alcohol-based synthetic resin sealer • Seals Smoke, Grease and Fire Damage - Prevents stains from Do not apply if material, substrate or
that stops bleeding on plaster, wood, metal and masonry. It is ideal as a bleeding through the finish coat ambient temperature is below 40°F (4°C).
replacement for pigmented shellac, although it does not contain shellac. • Seals Stains and Odors From Fire and Smoke Damage Not for immersion service.
• Seals Porous Substrates - Provides an optimal final finish appearance
Helps seal in odors.
TB-1100: An acrylic latex primer for use over wood, masonry and • Tannin-Blocking Formula - Prevents stains from Do not apply when surface or air
previously painted surfaces. It seals new cedar and redwood and dries bleeding through the finish coat temperature is below 35°F (1.7°C) or if
dust and bug free in 30 minutes. It is water thinned, blister and peel • Acrylic Resin in Tough Exterior Formula - Seals new cedar and surface or air temperature will drop
redwood (which are prone to bleeding) and dries dust free below 35°F (1.7°C) within 8 hours of
resistant and high hiding. in 30 minutes application. Do not apply to a hot surface
• Blister and Peel Resistant - The topcoat will look uniform or if rain is threatening.
and be resistant to blistering and peeling
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 103
†For the most up-to-date MPI specifications, visit www.mpi.net
Floor Coatings
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
EGG-xxx GarageGuard® Waterborne Epoxy Colors Tint &
Garage Floor Coating Neutral 50.5% Avg 8 hrs. 250-300 2.7-3.2 245
Tintable
HTF-xxx Hot Trax® Epoxy Fortified Acrylic White, White & 37.1% 24 hrs. 300-400 1.5-2.0 48 Qualifies for LEED® Credit
Concrete and Garage Floor Paint Colors Accent
White, Tint,
TS-3xxx Tough Shield® Floor & Patio Colors
Neutral 36.6% 24 hrs. 350-450 1.3-1.7 167
& Deep
Clear
SU-0xxx Sure Step® Anti-Slip Coating White, Accent 38.4% 8 hrs. 80-120 NA 127
Colors
EGF-XXX Insl-x® Decorative Floor Flakes Colored flakes used to disperse into wet floor coating if desired
EGG-xxx: GarageGuard® Waterborne Expoxy Garage • C atalyzed Epoxy Formula - The final finish adheres well to the Do not apply when air, surface or product
Floor Coating is a new generation water-based catalyzed floor and resists water, oil and chemicals temperature is below 50°F (10°C). Use the entire
epoxy. • Waterborne Product - Easy application, and clean up with gallon of GarageGuard® within 4 hours of initial
soap and water mixing. Not recommended for use in immersion
• S emi-Gloss Finish in Popular Colors - Garage floors look clean service or acidic exposures.
and new
HTF-xxx: Hot Trax® Epoxy Fortified Acrylic Concrete • One-Component Product - Ready to be used out of the can Do not apply if surface or air temperature is below
and Garage Floor Paint is a high performance, ready to • Special Epoxy-Fortified Formula - Resists hot tire pickup from cars 50°F (10°C). Do not paint in direct sunlight
use, epoxy fortified acrylic floor coating that resists hot tire • Water-Based Formula - Easy application with low odor and soap or on hot surfaces.
and water clean up
pickup and marring common to driveways
and garage floors.
TS-3xxx: This 100% Acrylic Enamel is designed to • R ugged Acrylic Resin - The paint lasts for a long time and Apply when surface & air temperatures are above
produce a rugged, durable finish in light commercial or maintains a smooth appearance 50°F (10°C).
residential floor applications. • Waterborne Formula - Easy clean up and low odor
• Ready Mixed Colors and Bases - End users can paint with the
color of their choice
SU-Oxxx: Sure Step® Anti-Slip Coating provides • Anti-Slip Formula - Provide safety for people in slip-prone areas Apply by roller, squeegee or brush (small areas)
a durable skid resistant finish for interior or exterior • Waterborne Product - Easy application and clean up, with low odor when surface temperature is between 50°F (12.8°C)
application. Imparts excellent color retention, abrasion and 90°F (32.2°C). On exterior applications, do not
resistance and resistance to ponding water. apply outside when rain is threatening.
104 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Masonry Coatings
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
FLB-100 TuffCrete® Acrylic Epoxy Clear Clear NA 17.2% 4 hrs. 150-250 1.1-2.2 96 Qualifies for LEED® Credit
Bonding Primer/Sealer
Clear
CST-5xxx TuffCrete® Solvent Acrylic Concrete White, Neutral 25.0% 2 hrs. 300-400 1.0-1.3 651 MPI 58 , 104
Stain & Waterproofing Sealer Colors
Clear
CST-2xxx TuffCrete® Waterborne Acrylic White, Neutral
28.2% 4 hrs. 450-550 1.5 153 MPI 58
Concrete Stain & Deep
Colors
FLB-100: TuffCrete® Clear Bonding Primer/Sealer is a specially- • Interior/Exterior Must be top coated. Do not use for
INSL-X.COM
Insl-x®
engineered acrylic epoxy clear sealer for masonry floor surfaces designed • Improves Topcoat Adhesion a clear finish coat. Apply and allow
to lock down latent residue on masonry surfaces and provide enhanced • Penetrates and Bonds to Concrete to dry at temperatures between
• Low Odor 50°F (10°C) and 90°F (32.2°C).
adhesion for finish coats of paint.
On exterior surfaces, do not use
if rain is expected within 24 hours.
Not to be used for immersion service.
CST-5xxx: TuffCrete® Solvent Acrylic Waterproofing Concrete Stain • Formula Contains Xylene - The stain penetrates into almost Do not apply in direct sunlight or on
is a solvent-borne acrylic designed for deep penetration into concrete all surfaces hot surfaces. Not for immersion service
surfaces. It may be applied in one coat, as a stain, or in two coats as an • Right Level of Opacity - Can be used as a stain with one coat and or in areas where water will pond.
more of an opaque finish with two coats Tint only with industrial colorants. Do
opaque finish.
not apply if the surface or ambient
temperature is below 50°F (10°C) or
more than 90°F (32.2°C).
CST-2xxx: TuffCrete® WB Acrylic Waterproofing Concrete Stain is a • 100% Acrylic Formula - Durable finish due to 100% acrylic formula Do not apply in direct sunlight or
water reduced coating designed for interior or exterior masonry surfaces. • Waterborne Formula - Soap and water clean up on hot surfaces. Do not apply if the
It may be applied in one coat, as a stain, or in two coats as an opaque finish. • Right Level of Opacity - Can be used as a stain with one coat and surface or ambient temperature is
more of an opaque finish with two coats below 50°F (10°C) or more than
90°F (32.2°C).
AMW-1000: Waterblock® Acrylic Masonry Waterproofer is designed to • Special Formulation - Water is resisted up to 12 psi Paint only when surface and air
waterproof interior or exterior masonry surfaces such as basement walls, • Water-Based Formula - Soap and water clean up temperatures are between 50°F (10°C)
foundations, retaining walls, exterior masonry walls, etc. • Formulated to Apply Easily - Easy transfer to the wall and 90°F (32.2°C). Should not be used
on floors.
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 105
†For the most up-to-date MPI specifications, visit www.mpi.net
Pool Paints
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
WR-10xx Waterborne Swimming Pool Paint, White, NA 38.0% 4-6 hrs. 300-400 2.7-3.6 230
Semi-Gloss Colors
RP-27xx Rubber-Based Swimming Pool White, NA 59.2% 24 hrs. 400-500 1.9-2.4 338
Paint, Satin Colors
White,
IG-40xx Epoxy Swimming Pool Paint Colors
NA 61.9% 3-72 hrs. 350-400 2.0-2.5 335
CR-26xx Chlorinated Rubber Swimming White, NA 33.0% 24 hrs. 250-300 1.7 - 2.1 574
Pool Paint Colors
WR-10xx: Acrylic emulsion waterborne swimming pool paint. • Acrylic Emulsion Formula - Can be applied over most types Complete, detailed application
of properly prepared existing pool paints instructions must be followed
• Waterborne Product and Low Odor for proper performance. For
• Acrylic Emulsion Formula - Can be applied to slightly damp surfaces in-ground, masonry-based pools.
and dries quickly
RP-27xx: A rubber-based coating for new or old concrete pools. • Rubber-Based Formula - Product can be used over both rubber Complete, detailed application
It provides a durable low sheen finish for use in residential and and chlorinated rubber existing coatings instructions must be followed
commercial pools. • Resists Fading and Algae - The finish maintains a freshly for proper performance. For
painted appearance in-ground, masonry-based pools.
• Fast Dry- Quick return to service
IG-40xx: Epoxy Pool Paint is a high solids, two component coating that • Two-Component Epoxy Formula - Extremely durable coating Do not apply this coating over any
offers excellent chemical and abrasion resistance and can be applied over provides a long lasting finish rubber base or water base pool
most existing epoxy pool paints in good condition as well as aluminum, • Polyamide Formula - Can be used on properly prepared concrete, paints. Complete, detailed application
fiberglass and steel pools instructions must be followed for
steel and fiberglass.
proper performance.
CR-26xx: Chlorinated Rubber Swimming Pool Paint is a chlorinated • Chlorinated Rubber Formula - Can recoat existing chlorinated Complete, detailed application
rubber-based coating for new or old concrete pools. Durable in fresh or salt rubber pool coatings instructions must be followed
water and acceptable for use in chlorinated pools. • Resists Fading and Algae - The finish maintains a freshly for proper performance.
painted appearance
106 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Traffic Coatings
Cov.
Code Product Colors Bases Vol Sol. Recoat 4 inch line DFT mils VOC gm./l. Specifications†
(10.2 cm)
MPI 97
TP-22xx Latex Traffic Paint Colors NA 33.9% 4 hrs. 500-800 1.7-2.4 87
TP-32xx Latex Traffic Paint Yellow NA 39.0% 3-4 hrs. 320-480 4-6 45 MPI 97
TP-23xx Acrylic Fast-Set Traffic Paint White NA 57.0% 2 hrs. 500-800 2.6-2.7 24 MPI 97
TP-33xx Acrylic Fast-Set Traffic Paint Yellow NA 61.0% 2 hrs. 500-800 2.6-2.7 23.5
TP-24xx Alkyd Traffic Paint White NA 53.5% 4 hrs. 500-800 2.7-3.7 348 MPI 32
TP-34xx Alkyd Traffic Paint Yellow NA 54.0% 4 hrs. 500-800 2.7-3.7 332
INSL-X.COM
Insl-x®
Product Description Features/Benefits Notes
TP-22xx & TP-32xx: Waterborne latex 30-minute dry traffic paint. • Waterborne Formula - Meets VOC requirements and allows Do not apply when air or surface
equipment to be cleaned with water temperatures are below 50°F (10°C).
Do not apply to extremely hot
surfaces. Paint only in dry weather.
TP-23xx & TP33xx: Waterborne acrylic fast set (20-minute dry) • Waterborne Formula - Meets VOC requirements and allows Do not apply when air or surface
for water clean up of equipment temperatures are below 50°F (10°C).
Do not apply to extremely hot
surfaces. Paint only in dry weather.
TP-24xx & TP34xx: A fast drying paint for marking traffic lanes • Rugged Formula - Resists abrasion, oils and severe weather Do not apply when air or surface
on sidewalks, curbs, airport runways, parking lots and in warehouses • Fast Dry - Allows for quick return to service temperatures are below 50°F (10°C).
and other venues where such marking is required. Traffic beads may be Do not apply to extremely hot
dropped into this coating while wet to provide reflectorized markings. surfaces. Paint only in dry weather.
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 107
†For the most up-to-date MPI specifications, visit www.mpi.net
Athletic Coatings
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1,200
B0-5500 Athletic Field Marking Paste White NA 30.0% 1 hr.
lineal
47
White, 1200
FM-65xx Acrylic Field Marking Paint Yellow NA 22.3% 4 hrs.
lineal
.09–1.8 31
Green,
TRC-08x Tru-flex® Smooth Colored Finish Coats Dark Green, NA 26.2% 3-4 hrs. 75-150 NA 185
Series Red, Blue
TRC-040 Tru-flex® Neutral Filler Coat Neutral NA 61.0% 3-4 hrs. 90-135 NA 66
TRC-28x Green,
Series Tru-flex® Textured Colored Finish Coats Dark Green, NA 31.0% 3-4 hrs. 80 NA 94
Red, Blue
TRC-035: A ready-to-use, non-shrinking, non-cracking patching compound for • Patch and Level Existing Tennis Courts with Depressions Color this product by adding 08x
depressions in tennis courts. and Cracks series and 28 series topcoats.
TRC-038: To mark lines on tennis courts and other recreational surfaces. • Mark Lines on Tennis and Recreational Hard Surfaces
TRC-040: Filler Coat consists of 100% acrylic emulsions, special reinforcing • Protect and Prolong Tennis Court Finishes
pigments and pure silica sand that provides a uniform and controlled texture
TRC-060: A high-performance coating consisting of encapsulated rubber particles and • Provide a Cushioned Surface with Encapsulated Rubber Mix with top coats to create color.
fillers, carefully blended with 100% acrylic emulsion, to create a shock absorbing color surface Particles
when used as part of the Tru-flex® System. • 100% Acrylic Formula - The products will last a long time
TRC-28x Series: 100% acrylic emulsion coatings, highly pigmented, with prime • Create an Even, Textured, Highly-Colored Playing Surface
color and reinforcing pigments that will provide a long-lasting textured finish for • Acrylic Emulsion Product Will Last a Long Time
tennis and sports courts.
108 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Specialty Coatings
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
CC-45xx Cabinet Coat Satin White Tint 33.1% 6 hrs. 350-450 1.2-1.5 47 Qualifies for LEED® Credit, MPI 140
CC-46xx Cabinet Coat Semi-Gloss White Tint 33.1% 6 hrs. 350-450 1.2-1.5 47 Qualifies for LEED® Credit, MPI 141
EC-3210 Lead Block® Lead Encapsulant White NA 43.7% 4-12 hrs. 85-100 7-8 91
Safety
FK-13xx Freezer Kote Yellow, NA 59.6% 5-48 hrs. 450-500 1.9-2.1 327
White
FR-110 Latex Fire Retardant Paint White NA 46.0% 4 hrs. 300 2.5 45 Qualifies for LEED® Credit, MPI 64
INSL-X.COM
Insl-x®
Product Description Features/Benefits Notes
CC-45xx & CC-46xx: Cabinet Coat is the ultimate finish for • Urethane-Modified Acrylic Formula - Factory smooth finish from Do not apply when air, product
refurbishing kitchen and bathroom cabinets, shelving, furniture, trim & a brush or roller or surface temperature is below
crown molding and other interior applications that require an ultra smooth, • Excellent Adhesion - Can be used on difficult substrates 50°F (10°C) or above 90°F (32°C).
factory like finish with long lasting beauty. • Outstanding Durability - Helps cabinets look nice for years
SXA-110: Stix® WB Bonding Primer is a premium quality, waterborne, • Bonds to Glossy Surfaces - Bathroom tile and other hard-to-paint Apply when air, surface and product
acrylic urethane primer/sealer with unparalleled adhesion to the most surfaces can now be painted easily temperature are above 35°F (1.7°C).
challenging surfaces, including PVC, Vinyl, Plastic, Glass, Tile, Glazed Block, • Excellent Base Coat for Both Latex and Oil-Based Top Coats - Do not apply in direct sunlight or on a
Glossy Paints, Pre-Coated Siding and Fiberglass. Useful for almost all painting projects hot surface. Avoid rain, moisture or high
• Soap and Water Clean Up - Easy to use, with soap and water clean up humidity for the first 24 hours of curing.
EC-3210: This is a thick coating with elastomeric properties. • Can Be Applied with Standard Applicators - No special training Do not apply to below grade or back-
It encapsulates lead-based paints and forms a dense, high-solids barrier needed to use filled walls. Do not apply if surface
that blocks and seals to prevent the migration of lead contaminants • Formula Dries to a Smooth Finish - Can be top-coated with other or air temperatures are below
from reaching the surface. paints to match decorating schemes 50°F (10°C) or above 95°F (35°C).
• Encapsulates Lead Paint - Creates a barrier over lead paints
FX-13xx: A high-gloss, rust inhibiting, non-yellowing coating designed • For Sub-Freezing Painting Down to -40°F If painting conditions exceed
for application from just below ambient to sub-freezing temperatures. • Not Recommended For Residential Use 40°F (5°C), Freezer-Kote is not
• For Industrial Use Only recommended due to the fact that
the alcohol-based solvents will dry
quickly. Not for immersion service
and not recommended for floors.
FR-110: Insl-x® Fire Retardant Paint is a high-quality, decorative, • Intumescent Use product when surface
intumescent, fire retardant coating for interior ceilings, walls and trim. • Passes ASTM E-84 temperature is between 50°F (10°C)
This product provides a high-hiding matte finish that retards flame. • Class “A” and 95°F (35°C).
• See TDS for More Detailed Information
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 109
†For the most up-to-date MPI specifications, visit www.mpi.net
LENMAR®
®
Homeowner Wood Finishes
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1WB.1300 Waterborne
Stain
Interior Wiping NA X 10.3% 3-4 hrs. 400-450 Minimal 240 Qualifies for LEED® Credit, MPI 186
Spar Varnish
A special blend of tough resins, flexible oil and UV blockers makes this varnish a great choice for wood
and other exterior surfaces exposed to sun and weather.
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Code Product Colors Bases Vol Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
LENMAR-COATINGS.COM
1WB.1400 Waterborne
Gloss
Aqua-Plastic® Urethane Clear NA 27.5% 2-4 hrs. 400-500 0.9-1.1 322 Qualifies for LEED® Credit
MPI 121, 130
Lenmar®
1WB.1410 Waterborne Aqua-Plastic® Urethane Clear NA 27.5% 2-4 hrs. 400-500 0.9-1.1 323 Qualifies for LEED® Credit
Semi-Gloss MPI 121, 129
1WB.1427 Waterborne
Satin
Aqua-Plastic® Urethane Clear NA 27.5% 2-4 hrs. 400-500 0.9-1.1 335 Qualifies for LEED® Credit
MPI 121, 128
1WB.1420 Waterborne
Dull
Aqua-Plastic® Urethane Clear NA 27.5% 2-4 hrs. 400-500 0.9-1.1 305 Qualifies for LEED® Credit
MPI 121, 181
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 111
†For the most up-to-date MPI specifications, visit www.mpi.net
®
Waterborne Wood Floor Finishes
Code Product Colors Bases Wt. Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1PR.304 ClearCoat PRO, Satin Clear NA 31.0% ± 1.0% 3-4 hours 450-550 1.0-1.5 245
1PR.306 ClearCoat PRO, Semi-Gloss Clear NA 30.0% ± 1.0% 3-4 hours 450-550 1.0-1.5 247
1PR.309 ClearCoat PRO, Gloss Clear NA 30.0% ± 1.0% 3-4 hours 450-550 1.0-1.5 249
Code Product Colors Bases Wt. Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1PR.504 ClearCoat PRO HT, Satin Clear NA 33.0% ± 1.0% 3-4 hours 450-550 1.0-1.5 135
1PR.506 ClearCoat PRO HT, Semi-Gloss Clear NA 32.0% ± 1.0% 3-4 hours 450-550 1.0-1.5 137
1PR.509 ClearCoat PRO HT, Gloss Clear NA 31.0% ± 1.0% 3-4 hours 450-550 1.0-1.5 137
112 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
®
Waterborne Wood Floor Finishes
Code Product Colors Bases Wt. Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1PR.704 ClearCoat PRO XD, Satin Clear NA 33.0% ± 1.0% 3-4 hours 450-550 1.0-1.5 135
1PR.706 ClearCoat PRO XD, Semi-Gloss Clear NA 32.0% ± 1.0% 3-4 hours 450-550 1.0-1.5 137
1PR.709 ClearCoat PRO XD, Gloss Clear NA 31.0% ± 1.0% 3-4 hours 450-550 1.0-1.5 137
Code Product Colors Bases Wt. Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1PR.100 ClearCoat PRO Sealer Clear NA 31.0% ± 1.0% 3-4 hours 450-550 1 265 LENMAR-COATINGS.COM
Lenmar®
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 113
†For the most up-to-date MPI specifications, visit www.mpi.net
®
Waterborne Wood Floor Finishes
Code Product Colors Bases Wt. Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1YB.100 ECH₂O® Sealer Clear NA 29.0% ± 1.0% 3-4 hours 600 0.8-1.0 190 Qualifies for LEED® Credit
114 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
®
Interior Wood Flooring
Code Product Colors Bases Wt. Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Polyurethane Floor Finish,
1Y.555 Clear NA 45.0%-55.0% Overnight 450 1.5-2.0 446 MFMA
Gloss
Polyurethane Floor Finish,
1Y.724 Clear NA 35.0%-45.0% Overnight 450 1.5-2.0 515
Semi-Gloss
Polyurethane Floor Finish,
1Y.617 Clear NA 35.0%-45.0% Overnight 450 1.5-2.0 506
Satin
Polyurethane Floor Finish,
1Y.915 Clear NA 35.0%-45.0% Overnight 450 1.5-2.0 514
Dull-Rubbed
Code Product Colors Bases Wt. Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Polyurethane Floor Finish,
1Y.359 Clear NA
LENMAR-COATINGS.COM
50.0%-60.0% Overnight 450 1.5-2.0 348 Qualifies for LEED® Credit, MPI 56
Gloss (350 VOC)
Polyurethane Floor Finish,
Lenmar®
1Y.356 Clear NA 50.0%-60.0% Overnight 450 1.5-2.0 341 Qualifies for LEED® Credit
Semi-Gloss (350 VOC)
Polyurethane Floor Finish,
1Y.354 Clear NA 50.0%-60.0% Overnight 450 1.5-2.0 341 Qualifies for LEED® Credit, MPI 57
Satin (350 VOC)
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 115
†For the most up-to-date MPI specifications, visit www.mpi.net
®
Interior Wood Flooring
Code Product Colors Bases Wt. Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1Y.809 CourtTime Gym Floor Finish, Gloss Clear NA 49.0% ± 1.0% Overnight 450 1.5-2.0 446 MFMA
Code Product Colors Bases Wt. Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1Y.519 RapidSeal Dual Purpose Sealer Clear NA 36.0% ± 1.0% 2-4 hours 450 0.75-1.25 548 MFMA
116 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
®
Interior Wood Flooring
Code Product Colors Bases Wt. Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1T.992 Moisture Cure Urethane Gloss Clear NA 40.0% ± 1.0% 6-8 hours 550 1.0-1.3 576
LENMAR-COATINGS.COM
Lenmar®
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 117
†For the most up-to-date MPI specifications, visit www.mpi.net
®
Interior Wood Floor Cleaning & Prep
Code Product Colors Bases Wt. Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Floor Cleaner
Designed to clean hardwood floors easily and without any film or residue left behind. It is ideal for
cleaning floors prior to recoating.
Code Product Colors Bases Wt. Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
118 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
®
Clear Conversion Varnishes
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
MegaVar® Plus, WW Conv.
1M.6309 Clear 90+ 50.0% 30-45 min. 650 1.3-1.7 498 AWS
Varn. Gloss
MegaVar® Plus, WW Conv.
1M.6306 Clear 60 50.0% 30-45 min. 650 1.3-1.7 496 AWS
Varn. S/Gloss
MegaVar® Plus, WW Conv.
1M.6304 Clear 40 50.0% 30-45 min. 650 1.3-1.7 493 AWS
Varn. Satin
MegaVar® Plus, WW Conv.
1M.6302 Clear 20 50.0% 30-45 min. 650 1.3-1.7 491 AWS
Varn. Dull
MegaVar® Plus, WW Conv.
1M.6301 Clear 10 50.0% 30-45 min. 650 1.3-1.7 498 AWS
Varn. Flat
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1M.4309 MegaVar® WW Conv. Varn. Gloss Clear 90+ 40.0% 30-45 min. 500 1.0-1.3 585 AWS
1M.4306 MegaVar® WW Conv. Varn. S/Gloss Clear 60 40.0% 30-45 min. 500 1.0-1.3 597 AWS
1M.4302 MegaVar® WW Conv. Varn. Dull Clear 20 40.0% 30-45 min. 500 1.0-1.3 578 AWS
1M.4301 MegaVar® WW Conv. Varn. Flat Clear 10 40.0% 30-45 min. 500 1.0-1.3 583 AWS
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 119
†For the most up-to-date MPI specifications, visit www.mpi.net
®
Clear Conversion Varnishes
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1C.5300 MegaVar® WW Conv. Sealer Clear NA 38.0% 30 min. 500 0.9-1.2 553 AWS
120 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
®
Clear Precatalyzed Lacquers
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
UltraMax® Plus, WW Precat Lac,
1D.359 Clear 90+ 32.0% 30 min. 400 0.8-1.0 616 AWS
Gloss
UltraMax® Plus, WW Precat Lac,
1D.356 Clear 60 32.0% 30 min. 400 0.8-1.0 613 AWS
S/Gloss
UltraMax® Plus, WW Precat Lac,
1D.354 Clear 40 32.0% 30 min. 400 0.8-1.0 611 AWS
Satin
UltraMax® Plus, WW Precat Lac,
1D.352 Clear 20 32.0% 30 min. 400 0.8-1.0 610 AWS
Dull
UltraMax® Plus, WW Precat Lac,
1D.351 Clear 10 32.0% 30 min. 400 0.8-1.0 607 AWS
Flat
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1D.339 UltraLaq® WW Precat Lac, Gloss Clear 90+ 27.0% 30 min. 325 0.7-0.9 667 AWS
1D.336 UltraLaq® WW Precat Lac, S-Gloss Clear 60 27.0% 30 min. 325 0.7-0.9 666 AWS
1D.334 UltraLaq® WW Precat Lac, Satin Clear 40 27.0% 30 min. 325 0.7-0.9 664 AWS
LENMAR-COATINGS.COM
1D.332 UltraLaq® WW Precat Lac, Dull Clear 20 27.0% 30 min. 325 0.7-0.9 662 AWS
Lenmar®
1D.331 UltraLaq® WW Precat Lac, Flat Clear 10 27.0% 30 min. 325 0.7-0.9 659 AWS
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 121
†For the most up-to-date MPI specifications, visit www.mpi.net
®
Clear Precatalyzed Lacquers
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1C.360 UltraLaq® WW Vinyl Sealer Clear NA 21.0% 20-30 min. 225 0.6-0.8 680 AWS
1C.370 UltraLaq® WW Precat Vinyl Sealer Clear NA 22.0% 20-30 min. 225 0.6-0.8 669 AWS
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
UltraMax® 550 VOC WW Precat,
1D.459 Clear 85+ 32.0% ± 1.0% 30-45 mins 370-400 0.7-1.2 550
Gloss
UltraMax® 550 VOC WW Precat,
1D.456 Clear 60 32.0% ± 1.0% 30-45 mins 370-400 0.7-1.2 550
S/Gloss
1D.454 UltraMax® 550 VOC WW Precat, Satin Clear 40 32.0% ± 1.0% 30-45 mins 370-400 0.7-1.2 550
1D.452 UltraMax® 550 VOC WW Precat, Dull Clear 20 32.0% ± 1.0% 30-45 mins 370-400 0.7-1.2 550
1D.451 UltraMax® 550 VOC WW Precat, Flat Clear 10 32.0% ± 1.0% 30-45 mins 370-400 0.7-1.2 550
122 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Pigmented Conversion
®
Varnishes & Precats
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1S.758 MegaVar® White Conv. Varn. Gloss White 80+ 45.0% 30-45 min. 500 1.0-1.3 536 AWS
1S.756 MegaVar® White Conv. Varn. S/Gloss White 60 45.0% 30-45 min. 500 1.0-1.3 538 AWS
1S.754 MegaVar® White Conv. Varn. Satin White 40 45.0% 30-45 min. 500 1.0-1.3 541 AWS
1S.752 MegaVar® White Conv. Varn. Dull White 20 45.0% 30-45 min. 500 1.0-1.3 541 AWS
1S.750 MegaVar® Conversion Undercoater White NA 65.0% 30 min. 600 1.2-1.5 466 AWS
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1M.808 UltraLaq® White Precat Lacq. Gloss White 85+ 43.0% 30 min. 400 1.0-1.3 610 AWS
1M.806 UltraLaq® White Precat Lacq. S/Gloss White 60 43.0% 30 min. 400 1.0-1.3 615 AWS
1M.804 UltraLaq® White Precat Lacq. Satin White 40 43.0% 30 min. 400 1.0-1.3 615 AWS
LENMAR-COATINGS.COM
1M.802 UltraLaq® White Precat Lacq. Dull White 20 43.0% 30 min. 400 1.0-1.3 614 AWS
Lenmar®
1C.800 UltraLaq® White Precat Undercoater White 10 42.0% 30 min. 400 1.0-1.3 546 AWS
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 123
†For the most up-to-date MPI specifications, visit www.mpi.net
®
CAB/Acrylic Finishes
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
UltraUniLaq® CAB/Acrylic Clear,
1M.979 Clear 90+ 24.0% 30 min. 300 0.6-1.0 672
Gloss
UltraUniLaq® CAB/Acrylic Clear,
1M.976 Clear 60 24.0% 30 min. 300 0.6-1.0 669
S/Gloss
UltraUniLaq® CAB/Acrylic Clear,
1M.974 Clear 40 24.0% 30 min. 300 0.6-1.0 668
Satin
UltraUniLaq® CAB/Acrylic Clear,
1M.972 Clear 20 24.0% 30 min. 300 0.6-1.0 668
Dull
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Ultra UniLaq® CAB/Acrylic White,
1M.969 White 90+ 34.0% 30 min. 350 0.7-1.1 665
Gloss
Ultra UniLaq® CAB/Acrylic White,
1M.966 White 60 34.0% 30 min. 350 0.7-1.1 664
S-Gloss
Ultra UniLaq® CAB/Acrylic White,
1M.964 White 40 34.0% 30 min. 350 0.7-1.1 663
Satin
Ultra UniLaq® CAB/Acrylic White,
1M.962 White 20 34.0% 30 min. 350 0.7-1.1 662
Dull
124 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
®
CAB/Acrylic Finishes
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1C.475 Ultra UniLaq® CAB - Acrylic Sealer Clear NA 16.0% 20-30 min. 200 0.5-0.8 744
1C.360 UltraLaq® WW Vinyl Sealer Clear NA 21.0% 20-30 min. 225 0.6-1.0 680
1C.204 UltraLaq® White Vinyl Sealer White NA 30.0% 15-20 min. 225 0.6-0.8 675
LENMAR-COATINGS.COM
Lenmar®
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 125
†For the most up-to-date MPI specifications, visit www.mpi.net
®
Nitrocellulose Lacquers
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1LL.210 DuraLaq® WW Lacquer Clear, Gloss Clear 90+ 25.0% 30 min. 300 0.6-1.0 659
1LL.216 DuraLaq® WW Lacquer Clear, S/Gloss Clear 60 25.0% 30 min. 300 0.6-1.0 659
1LL.214 DuraLaq® WW Lacquer Clear, Satin Clear 40 25.0% 30 min. 300 0.6-1.0 661
1LL.212 DuraLaq® WW Lacquer Clear, Dull Clear 20 25.0% 30 min. 300 0.6-1.0 660
1LL.211 DuraLaq® WW Lacquer Clear, Flat Clear 10 25.0% 30 min. 300 0.6-1.0 652
1C.397 DuraLaq® WW High Solids Sealer Clear NA 28.0% 30 min. 300 0.6-1.0 634
1C.423 DuraLaq® WW High Build Sealer Clear NA 23.0% 30 min. 300 0.6-1.0 670
1C.203 DuraLaq® WW Nitrocellulose Sealer Clear NA 22.0% 30 min. 300 0.6-1.0 672
126 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
®
Nitrocellulose Lacquers
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1LL.689 DuraLaq® High Solids Pro, Gloss Clear 90+ 29.0% 30 min. 350 0.6-1.0 659
1LL.686 DuraLaq® High Solids Pro, S/Gloss Clear 60 29.0% 30 min. 350 0.6-1.0 656
1LL.684 DuraLaq® High Solids Pro,, Satin Clear 40 29.0% 30 min. 350 0.6-1.0 655
1LL.682 DuraLaq® High Solids Pro, Dull Clear 20 29.0% 30 min. 350 0.6-1.0 660
1LL.639 DuraLaq® High Build Pro, Gloss Clear 90+ 31.0% 30 min. 350 0.6-1.0 658
1LL.636 DuraLaq® High Build Pro, S/Gloss Clear 60 31.0% 30 min. 350 0.6-1.0 661
1LL.634 DuraLaq® High Build Pro, Satin Clear 40 31.0% 30 min. 350 0.6-1.0 654
1LL.632 DuraLaq® High Build Pro, Dull Clear 20 31.0% 30 min. 350 0.6-1.0 652
1C.383 DuraLaq® HB Lacquer Sealer Clear NA 26.0% 30 min. 400 0.6-1.0 672
1C.399 DuraLaq® HV N/C Sealer Clear NA 26.0% 30 min. 400 0.6-1.0 653
1C.201 DuraLaq® Production Sealer Clear NA 22.0% 30 min. 400 0.6-1.0 671
LENMAR-COATINGS.COM
Lenmar®
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 127
†For the most up-to-date MPI specifications, visit www.mpi.net
®
Nitrocellulose Lacquers
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1A.02 DuraLaq® White Concentrate, Gloss White 80+ 45.0% 30 min. 400 0.6-1.0 614
1H.12 DuraLaq® White Concentrate, S/Gloss White 60 45.0% 30 min. 400 0.6-1.0 615
1A.03 DuraLaq® White Concentrate, Dull White 20 45.0% 30 min. 400 0.6-1.0 607
1A.97 DuraLaq® Black Concentrate, Gloss Black 80+ 38.0% 30 min. 400 0.6-1.0 637
1A.13 DuraLaq® Black Concentrate, S/Gloss Black 60 38.0% 30 min. 400 0.6-1.0 634
1A.87 DuraLaq® Black Concentrate, Dull Black 40 38.0% 30 min. 400 0.6-1.0 631
1C.216 DuraLaq® Black Undercoater Black NA 43.0% 30 min. 400 0.6-1.0 602 NC
128 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
®
Nitrocellulose Lacquers
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1K01.99x9 DuraLaq® Lacquer Tint Bases, Gloss Bases 90+ 24.0%-45.0% 30 min. 400 0.6-1.0 582
1K01.99x6 DuraLaq® Lacquer Tint Bases, S/Gloss Bases 60 24.0%-45.0% 30 min. 400 0.6-1.0 574
1K01.99x4 DuraLaq® Lacquer Tint Bases, Satin Bases 40 24.0%-45.0% 30 min. 400 0.6-1.0 569
1K02.4776 DuraLaq® Lacquer Tint Bases, S/Gloss Bases 60 44.0% 30 min. 400 0.6-1.0 596
1K02.4774 DuraLaq® Lacquer Tint Bases, Satin Bases 40 44.0% 30 min. 400 0.6-1.0 597
LENMAR-COATINGS.COM
Lenmar®
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 129
†For the most up-to-date MPI specifications, visit www.mpi.net
®
275 VOC Conversion Varnishes
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
MegaVar® 275 VOC WW Conversion
1M.2509 Clear 85+ 36.0% ± 1.0% 45-60 mins. 480-500 1.0-1.5 275
Varnish, Gloss
MegaVar® 275 VOC WW Conversion
1M.2506 Clear 60 36.0% ± 1.0% 45-60 mins. 480-500 1.0-1.5 275
Varnish, S/Gloss
MegaVar® 275 VOC WW Conversion
1M.2504 Clear 40 36.0% ± 1.0% 45-60 mins. 480-500 1.0-1.5 275
Varnish, Satin
MegaVar® 275 VOC WW Conversion
1M.2502 Clear 20 36.0% ± 1.0% 45-60 mins. 480-500 1.0-1.5 275
Varnish, Dull
MegaVar® 275 VOC WW Conversion
1M.2501 Clear 10 36.0% ± 1.0% 45-60 mins. 480-500 1.0-1.5 275
Varnish, Flat
130 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
®
275 VOC Precatalyzed Lacquers
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
UltraLaq® 275 VOC Precat Clear,
1D.2219 Clear 90+ 30.0% 30 min. 350 0.6-1.0 261 AWS
Gloss
UltraLaq® 275 VOC Precat Clear,
1D.2216 Clear 60 30.0% 30 min. 350 0.6-1.0 261 AWS
S/Gloss
UltraLaq® 275 VOC Precat Clear,
1D.2214 Clear 40 30.0% 30 min. 350 0.6-1.0 261 AWS
Satin
UltraLaq® 275 VOC Precat Clear,
1D.2212 Clear 20 30.0% 30 min. 350 0.6-1.0 262 AWS
Dull
UltraLaq® 275 VOC Precat Clear,
1D.2211 Clear 10 30.0% 30 min. 350 0.6-1.0 262 AWS
Flat
1C.2138 UltraLaq® 275 VOC WW Vinyl Sealer Clear NA 30.0% 30 min. 350 0.6-1.0 265 AWS
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
UltraLaq® 275 VOC Precat White,
1M.2269 White 90+ 35.0% 30 min. 400 0.8-1.0 263 AWS
Gloss
UltraLaq® 275 VOC Precat White,
1M.2266 White 60 35.0% 30 min. 400 0.8-1.0 263 AWS
S/Gloss
UltraLaq® 275 VOC Precat White,
LENMAR-COATINGS.COM
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 131
†For the most up-to-date MPI specifications, visit www.mpi.net
®
275 VOC Nitrocellulose Lacquers
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
DuraLaq® 275 VOC WW Lacquer,
1LL.2316 Clear 60 25.0% 30 min. 300 0.6-1.0 261
S/Gloss
DuraLaq® 275 VOC WW Lacquer,
1LL.2314 Clear 40 25.0% 30 min. 300 0.6-1.0 261
Satin
DuraLaq® 275 VOC WW Sanding
1C.2153 Clear NA 24.0% 30 min. 300 0.6-1.0 274
Sealer
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
DuraLaq® 275 VOC Production HB,
1M.2429 Clear 90+ 25.0% 30 min. 250 0.6-1.0 270
Gloss
DuraLaq® 275 VOC Production HB,
1M.2426 Clear 60 25.0% 30 min. 250 0.6-1.0 270
S/Gloss
DuraLaq® 275 VOC Production HB,
1M.2424 Clear 40 25.0% 30 min. 300 0.6-1.0 271
Satin
DuraLaq® 275 VOC HP Lacquer
1C.2350 Clear NA 20.0% 30 min. 250 0.5-0.8 270
Sanding Sealer
132 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
®
275 VOC Nitrocellulose Lacquers
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
DuraLaq® 275 VOC White Lacquer,
1M.2309 White 90+ 35.0% 30 min. 400 0.8-1.0 266
Gloss
DuraLaq® 275 VOC White Lacquer,
1M.2306 White 60 35.0% 30 min. 400 0.8-1.0 268
S/Gloss
DuraLaq® 275 VOC White Lacquer,
1M.2304 White 40 35.0% 30 min. 400 0.8-1.0 268
Satin
DuraLaq® 275 VOC White
1C.2395 White NA 50.0% 30 min. 400 0.9-1.2 261
Undercoater
LENMAR-COATINGS.COM
Lenmar®
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 133
†For the most up-to-date MPI specifications, visit www.mpi.net
®
Waterborne Systems
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1WB.509 MegaVar® WB Urethane, Gloss Clear 90+ 31.0% 30 min. 350 0.8-1.1 268 AWS
1WB.506 MegaVar® WB Urethane, S/Gloss Clear 60 31.0% 30 min. 350 0.8-1.1 267 AWS
1WB.504 MegaVar® WB Urethane, Satin Clear 40 31.0% 30 min. 350 0.8-1.1 266 AWS
1WB.502 MegaVar® WB Urethane, Dull Clear 20 31.0% 30 min. 350 0.8-1.1 271 AWS
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1WB.109 DuraLaq® WB Acrylic Finish, Gloss Clear 90+ 28.0% 30-45 min. 300 0.6-1.0 378
1WB.106 DuraLaq® WB Acrylic Finish, S/Gloss Clear 60 28.0% 30-45 min. 300 0.6-1.0 372
1WB.104 DuraLaq® WB Acrylic Finish, Satin Clear 40 28.0% 30-45 min. 300 0.6-1.0 377
1WB.102 DuraLaq® WB Acrylic Finish, Dull Clear 20 28.0% 30-45 min. 300 0.6-1.0 378
1WB.100 DuraLaq® WB Acrylic Sealer Clear NA 28.0% 30-45 min. 300 0.6-1.0 375
134 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
®
Waterborne Systems
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1WB.209 DuraLaq® WB Acrylic White, Gloss White 90+ 34.0% 30 min. 350 0.7-1.1 239 Qualifies for LEED® Credit
1WB.206 DuraLaq® WB Acrylic White, S-Gloss White 60 34.0% 30 min. 350 0.7-1.1 243 Qualifies for LEED® Credit
1WB.204 DuraLaq® WB Acrylic White, Satin White 40 34.0% 30 min. 350 0.7-1.1 240 Qualifies for LEED® Credit
1WB.202 DuraLaq® WB Acrylic White, Dull White 20 34.0% 30 min. 350 0.7-1.1 237 Qualifies for LEED® Credit
1WB.200 DuraLaq® WB Undercoater Clear NA 44.0% 20-30 min. 350 0.8-1.1 70 Qualifies for LEED® Credit
LENMAR-COATINGS.COM
Lenmar®
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 135
†For the most up-to-date MPI specifications, visit www.mpi.net
®
Wiping Stains
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
17 stock colors plus base,
1AS.12xx QuickStain® Alkyd Wiping Stain 17 NA 12.0%-40.0% 30 min. NA NA 500
1AS.1200
1U.1000 QuickStain® Low Solids W/S Base NA 9.0% 30 min. NA NA 736 Base only
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
17 stock colors plus base,
1LS.12xx QuickStain® Lacquer Wiping Stain 17 NA 11.0-40.0% 30 min. NA NA 798
1LS.1000
1202 Cherry Mahogany 1207 Golden Oak 1212 Ebony 1217 Dark Walnut
1203 New England Walnut 1208 Fruitwood 1213 White 1218 Traditional Cherry
1204 Dark Mahogany 1209 Special Walnut 1214 Mission Oak 1200/1000 Neutral Base
1205 Cordovan 1210 Spanish Oak 1215 Dark Cherry
1206 Spice Brown 1211 Salem Maple 1216 Blackberry
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1WB.1100 QuickStain® Waterborne Wiping Stain base NA 12.0%-14.0% 30 min. NA NA 239 Qualifies for LEED® Credit
136 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
®
Glazes
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1GZ.1000 QuickStain® Traditional Glaze Base Base NA 35.0%-55.0% 45-120 min. NA NA 348 4 stock colors plus base, 1GZ.1000
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
LENMAR-COATINGS.COM
Lenmar®
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 137
†For the most up-to-date MPI specifications, visit www.mpi.net
®
Dyes
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
138 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
®
Specialty Coatings
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1W.482 DuraLaq® Booth Coater, Clear Clear NA 41.0% 30 min. 600 2.5-3.5 83
1W.483 DuraLaq® Booth Coater, White White NA 51.0% 30 min. 600 2.5-3.5 86
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
1D.669 DuraLaq® Crackle Finish Clear 5 10.0% 30-45 min. 600 0.6-1.0 767
Code Product Colors Gloss Wt Sol. Recoat Cov. sq.ft. DFT mils VOC gm./l. Specifications†
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 139
†For the most up-to-date MPI specifications, visit www.mpi.net
®
Solvents and Thinners
Code Product VOC gm./l.
1A.101 Acetone 0
140 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Environmental Commitment
& Product Certifications
Benjamin Moore & Co. is known for an unwavering commitment to industry-leading quality, innovation and
Useful Information
environmental responsibility. Our 1,600+ employees in the U.S. and Canada work hard every day to make
sure that reputation endures. From developing innovative paints that are environmentally responsible, to
manufacturing them safely and efficiently, to helping out in our communities, we care about the impact of our
products and our actions.
We are very involved in the green building movement. We manufacture many interior paints that qualify for
credits from the U.S. Green Building Council’s LEED® program. Natura®, our greenest paint, meets Green
Seal standards, is certified asthma and allergy friendly® and Cradle to Cradle Certified™ Silver. Our decision
to pursue these certifications confirms our commitment to the long-term sustainability of the company, our
employees, the environment and our communities. We plan to expand the number of products certified to
select standards every year.
The U.S. Green Building Council (USGBC) is committed to transforming the way buildings are designed,
constructed and operated through LEED, the top third-party verification system for sustainable structures around
the world. LEED, or Leadership in Energy and Environmental Design, is a certification program for buildings and
communities that guides their design, construction, operations and maintenance toward sustainability. It is based
on prerequisites and credits that a project meets to achieve a certification level: Certified, Silver, Gold and Platinum.
For example, to earn maximum LEED credits as a low-emitting product under the newest standard, LEED v4, flat
paint must meet a VOC level of 50 g/L or less (100 g/L or less for non-flats), as well as be emissions certified.
The Cradle to Cradle Certified™ Product Standard guides designers and manufacturers through a continual
improvement process that looks at a product through five quality categories: material health, material reutilization,
renewable energy and carbon management, water stewardship, and social fairness. Benjamin Moore has two paints
that are Cradle to Cradle Certified™ Silver: Ultra Spec® 500 Waterborne Interior Paint (base formulation only for
Flat, Low-Sheen, Eggshell, Semi-Gloss, Gloss and Primer) and Natura® (base formulation only for Primer, Flat,
Eggshell, Semi-Gloss and Pearl).
The asthma & allergy friendly™ Certification Program, administered by the Asthma and Allergy Foundation of
America (AAFA) in partnership with the international research organization, Allergy Standards Ltd. (ASL), is an
independent program created to scientifically test and identify consumer products that are more suitable for
people with asthma and allergies. Natura® is certified asthma & allergy friendly®.
The CERTIFIED ASTHMA & ALLERGY FRIENDLY Mark is a Registered Certification Mark of the ASTHMA AND ALLERGY FOUNDATION OF AMERICA and ALLERGY STANDARDS, LTD.
Cradle to Cradle Certified™ is a certification mark licensed by the Cradle to Cradle Products Innovation Institute. All other marks are the property of their respective own
141
Environmental Commitment
& Product Certifications
Green Seal is a nonprofit organization founded in 1989 to safeguard the health of people and the planet.
Green Seal provides science-based environmental certification standards to help manufacturers, purchasers
and consumers make responsible choices that positively impact business behavior and improve quality of life.
Thousands of products and services in over 390 categories have been certified to meet Green Seal standards.
Natura® meets Green Seal™ Standard GS-11 based on effective performance, minimized/recycled packaging,
and protective limits on VOCs and human toxicity. GreenSeal.org.
MPI CATEGORY 10
Gloss Level
1-2
Paints certified to MPI’s Green Performance Standard provide performance and durability equal to their
conventional counterparts; have eliminated or contain only trace quantities of various undesirable chemical
components such as phthalates; and have reduced VOC levels. MPI GPS 1 sets VOC levels aligned with LEED
requirements; MPI’s GPS 2 – the most stringent in North America when introduced in 2007 – has a maximum
allowable VOC level of 50 g/L across the board for all paint types. Many of Benjamin Moore’s products are
certified to MPI’s Green Performance Standard.
SM
The Living Building Challenge Imperative 11 requires manufacturers to disclose the ingredients in their
products to show they are free of “red list” chemicals and materials. The red list represents materials, chemicals
and elements known to pose serious risks to human health and the environment as defined by the Green
Building Alliance. Declare supports the Living Building Challenge by providing a transparent materials database
that project teams can select from to meet Imperative 11. A complete list of ingredients ensures that project
teams are specifying materials that are red list-free or comply with a red list exception. As a result, Declare
provides consumers with easy-to-understand information regarding raw materials and source location. The
Declare database features Benjamin Moore’s Sure Seal® Latex Primer Sealer, Ultra Spec® HP Acrylic Metal
Primer HP04, Ultra Spec® 500 Interior Eggshell Finish N538, Ultra Spec® 500 Interior Flat Finish N536, Ultra
Spec® 500 Interior Low Sheen Finish N537, Ultra Spec® 500 Interior Primer N534, and Ultra Spec® Exterior
Flat Finish N447.
Benjamin Moore & Co. will continue its commitment to finding, developing and formulating its products
utilizing new technologies and raw materials while being ever aware of their impact on the environment.
142 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Environmental Commitment
& Product Certifications
Useful Information
In addition, all of our premium Gennex®-tinted interior paints have earned Benjamin Moore’s Green
Promise® designation.
Benjamin Moore’s Green Promise® designation is our company’s assurance that this product meets – and
often exceeds – rigorous environmental and performance criteria regarding VOCs, emissions, application,
washability, scrubbability, and packaging, while also delivering the premium levels of performance you
expect from Benjamin Moore.
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 143
†For the most up-to-date MPI specifications, visit www.mpi.net
Approved Products MPI® Standards
MPI# Product Type Listing Mfr Label Product Name Code
1 Aluminum Paint Benjamin Moore® Corotech® Alkyd Gloss Aluminum Enamel V200-78
2 Aluminum Paint, Heat Resistant (Up to 427°C - 800°F) Benjamin Moore® Corotech® High Heat Aluminum V264-78
Masonry Interior/Exterior Acrylic High Build
3 Primer, Alkali Resistant, Water Based Benjamin Moore® Super Spec® 608, 609
Masonry Primer
4 Block Filler, Latex, Interior/Exterior Benjamin Moore® Coronado® Super Kote 5000® Latex Production Block Filler Flat 958
4 Benjamin Moore® Super Spec® Masonry Interior/Exterior High-Build Block Filler 206
4 X-Green™ Benjamin Moore® Super Spec® Masonry Interior/Exterior High-Build Block Filler 206
4 X-Green™ Benjamin Moore® Coronado® Super Kote 5000® Latex Production Block Filler Flat 958
5 Primer, Alkyd/Oil for Exterior Wood Benjamin Moore® Fresh Start® Multi-Purpose Oil Based Primer o24
5 Benjamin Moore® Fresh Start® Exterior Wood Primer o94
5 Benjamin Moore® Coronado® Maxum® Exterior Oil Primer B800
5 Benjamin Moore® Super Spec® Exterior Alkyd Primer 176
5 Benjamin Moore® Arborcoat® Exterior Primer 366
6 Primer, Latex for Exterior Wood Benjamin Moore® Fresh Start® High-Hiding All Purpose Primer o46
6 Benjamin Moore® Fresh Start® Multi-Purpose Latex Primer N023
6 Benjamin Moore® Sure Seal® Latex Primer Sealer 27
6 Benjamin Moore® Insl-x® Block Out® Acrylic House Paint Primer TB-1100
6 Benjamin Moore® Super Spec® Latex Exterior Primer 169
9 Alkyd, Exterior Gloss (MPI Gloss Level 6) Benjamin Moore® Corotech® Alkyd Urethane Gloss Enamel V200
9 Benjamin Moore® Corotech® High Solids Quick Dry Gloss Enamel V225
9 Benjamin Moore® Super Spec HP® Urethane Alkyd Gloss Enamel P22
10 Latex, Exterior Flat (MPI Gloss Level 1) Benjamin Moore® Regal® Select Exterior High-Build Flat Finish N400
10 Benjamin Moore® Aura® Waterborne Exterior Paint Flat Finish 629
10 Benjamin Moore® ben® Waterborne Exterior Flat Finish 541
10 Benjamin Moore® Ultra Spec® EXT Exterior Flat Finish N447
10 Benjamin Moore® Regal® Select Moorlife® Exterior Flat Finish W105
10 Benjamin Moore® Coronado® Supreme Exterior Flat House Paint 8
10 Benjamin Moore® Coronado® Crylicote® Acrylic Flat House Paint 10
10 Benjamin Moore® Coronado® Super Kote 5000® Exterior 801
11 Benjamin Moore® Ultra Spec® EXT Exterior Gloss Finish N449
11 Benjamin Moore® ben® Waterborne Exterior Semi-Gloss Finish 543
11 Benjamin Moore® Regal® Select Waterborne Exterior Semi-Gloss Finish N403
13 Stain, Exterior, Solvent Based, Semi-Transparent Benjamin Moore® Arborcoat® Alkyd Semi-Transparent Deck & Siding Stain C328
13 Benjamin Moore® Arborcoat® Alkyd Translucent Deck & Siding Finish 326
15 Latex, Exterior, Low Sheen (MPI Gloss Level 3-4) Benjamin Moore® Ultra Spec® EXT Exterior Satin Finish N448
15 Benjamin Moore® Regal® Select Exterior High-Build Low Lustre Finish N401
15 Benjamin Moore® ben® Waterborne Exterior Low Lustre Finish 542
15 Benjamin Moore® Aura® Waterborne Exterior Low Lustre Finish 634
16 Stain, Exterior, Water Based, Solid Hide Benjamin Moore® Coronado® Maxum® 100% Acrylic Solid Color Stain B2000
16 Benjamin Moore® Arborcoat® Ultra Flat Solid Siding Stain 610
16 Benjamin Moore® Arborcoat® Solid Deck & Siding Stain 640
17 Primer, Bonding, Water Based Benjamin Moore® Fresh Start® Multi-Purpose Latex Primer N023
17 Benjamin Moore® Fresh Start® High Hiding All Purpose Primer o46
17 X-Green™ Benjamin Moore® Fresh Start® Multi-Purpose Latex Primer N023
17 X-Green™ Benjamin Moore® Fresh Start® High Hiding All Purpose Primer o46
18 Primer, Zinc Rich, Organic Benjamin Moore® Corotech® Organic Zinc Rich Primer V170
23 Primer, Metal, Surface Tolerant Benjamin Moore® Coronado® Rust Scat® Alkyd Metal Primer 35
27 Floor Enamel, Alkyd, Gloss (MPI Gloss Level 6) Benjamin Moore® Corotech® Alkyd Urethane Gloss Enamel V200
31 Varnish, Polyurethane, Moisture Cured, Gloss (MPI Gloss Level 6) Benjamin Moore® Corotech® Aromatic Moisture Cured Urethane Clear V580
32 Traffic Marking Paint, Alkyd Benjamin Moore® Insl-x® Alkyd Traffic Paint TP24xx
33 Stain, for Exterior Wood Decks Benjamin Moore® Arborcoat® Waterborne Translucent Deck & Siding Stain N623
33 Benjamin Moore® Arborcoat® Alkyd Semi-Transparent Deck & Siding stain 328/C328
33 Benjamin Moore® Arborcoat® Alkyd Translucent Deck & Siding Finish 326
33 Benjamin Moore® Arborcoat® Transluscent Deck & Siding Stain N623
35 Bituminous Coating Benjamin Moore® Corotech® Coal Tar Epoxy V157
38 Elastite® SUPER-STRETCH 20 Mil 100% Benjamin Moore® Coronado® Acrylic Elastomeric Waterproof Coating 166
39 Primer, Latex, for Interior Wood Benjamin Moore® Fresh Start® Multi-Purpose Latex Primer N023/F023
39 Benjamin Moore® Fresh Start® High Hiding All Purpose Primer o46
39 Benjamin Moore® Sure Seal® Latex Primer Sealer 27
39 Benjamin Moore® Insl-x® Aqua Lock® Plus Primer Sealer AQ-0400
144 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Approved Products MPI Standards
MPI# Product Type Listing Mfr Label Product Name Code
Useful Information
Texcrete® Waterborne Acrylic Masonry
42 Textured Coating, Latex, Flat Benjamin Moore® Coronado® 3196
Waterproofer Medium Texture
43 Latex, Interior, (MPI Gloss Level 4) Benjamin Moore® Regal® Select Waterborne Interior Pearl Finish 550
43 Benjamin Moore® Ultra Spec® 500 Interior Semi-Gloss Finish N539
43 Benjamin Moore® Aura® Waterborne Interior Satin Finish 526
Waterborne Satin
43 Benjamin Moore® Acrylic Low Lustre Enamel N314
Impervo®
43 Benjamin Moore® Super Hide® Zero VOC Interior Semi-Gloss 358
43 Benjamin Moore® Coronado® Super Kote 5000® Latex Satin 1160
43 Benjamin Moore® Coronado® Super Kote 5000® Zero 503
43 X-Green™ Benjamin Moore® Coronado® Super Kote 5000® Zero 503
43 X-Green™ Benjamin Moore® Ultra Spec® 500 Interior Semi-Gloss Finish N539
43 X-Green™ Benjamin Moore® Super Hide® Zero VOC Interior Semi-Gloss 358
43 X-Green™ Benjamin Moore® Aura® Waterborne Interior Satin Finish 526
43 X-Green™ Benjamin Moore® Regal® Select Waterborne Interior Pearl Finish 550
44 Latex, Interior, (MPI Gloss Level 2) Benjamin Moore® Ultra Spec® 500 Interior Low Sheen Finish N537
44 Benjamin Moore® Regal® Select Waterborne Interior Eggshell Finish 549
44 Benjamin Moore® Coronado® Super Kote 5000® Latex Low Sheen Eggshell 1130
44 Benjamin Moore® Coronado® Super Kote 5000® Latex Eggshell 30
44 Benjamin Moore® ben® Waterborne Interior Eggshell Finish W626
44 Benjamin Moore® Aura® Waterborne Interior Eggshell Finish 524
44 Benjamin Moore® Natura® Waterborne Interior Eggshell Finish 513
44 Benjamin Moore® Super Hide® Zero VOC Interior Low-Sheen 356
44 X-Green™ Benjamin Moore® Natura® Waterborne Interior Eggshell Finish 513
44 X-Green™ Benjamin Moore® Ultra Spec® 500 Interior Low Sheen Finish N537
44 X-Green™ Benjamin Moore® Regal® Select Waterborne Interior Eggshell Finish 549
44 X-Green™ Benjamin Moore® Super Hide® Zero VOC Interior Low-Sheen 356
44 X-Green™ Benjamin Moore® Aura® Waterborne Interior Eggshell Finish 524
44 X-Green™ Benjamin Moore® ben® Waterborne Interior Eggshell Finish W626
44 X-Green™ Benjamin Moore® Coronado® Super Kote 5000® Zero 504
45 Primer Sealer, Alkyd, Interior Benjamin Moore® Fresh Start® Multi-Purpose Oil Based Primer o24
45 Benjamin Moore® Fresh Start® Alkyd Enamel Underbody 217
45 Benjamin Moore® Super Spec® Alkyd Enamel Undercoat & Primer Sealer C245
45 Benjamin Moore® Insl-x® Odor-Less Alkyd Primer Sealer NO-4000
46 Undercoat, Enamel, Interior Benjamin Moore® Fresh Start® Alkyd Enamel Underbody 217
46 Benjamin Moore® Super Spec® Alkyd Enamel Undercoat & Primer Sealer C245
47 Benjamin Moore® Super Spec® Alkyd Semi-Gloss Enamel C271
48 Alkyd, Interior, Gloss (MPI Gloss Level 6-7) Benjamin Moore® Coronado® Rust Scat® Alkyd Urethane Gloss Enamel 31
48 Benjamin Moore® Super Spec HP® Urethane Alkyd Gloss Enamel P22
48 Benjamin Moore® Corotech® Alkyd Urethane Gloss Enamel V200
49 Alkyd, Interior, Flat (MPI Gloss Level 1) Benjamin Moore® Super Spec® Alkyd Calcimine Recoater 306
50 Benjamin Moore® Super Spec® Latex Enamel Undercoater and Primer Sealer 253
50 Benjamin Moore® Coronado® Grip & Seal Latex Stain Blocker 116
50 Benjamin Moore® Coronado® Super Kote™ 3000 Interior Latex Primer 948
50 Benjamin Moore® Eco Spec® WB Interior Primer N372
50 Benjamin Moore® Natura® Zero VOC Interior Primer 511
50 Benjamin Moore® Fresh Start® High-Hiding All Purpose Primer o46
50 Benjamin Moore® Coronado® Super Kote 5000® Acrylic Latex Primer 40
50 Benjamin Moore® Regal® Classic Premium Interior Latex Primer N216
50 Benjamin Moore® Ultra Spec® 500 Interior Latex Primer N534
50 X-Green™ Benjamin Moore® Natura® Zero VOC Intrerior Primer 511
50 X-Green™ Benjamin Moore® Fresh Start® High-Hiding All Purpose Primer o46
50 X-Green™ Benjamin Moore® Ultra Spec® 500 Interior Latex Primer N534
50 X-Green™ Benjamin Moore® Eco Spec® WB Interior Primer N372
52 Latex, Interior, (MPI Gloss Level 3) Benjamin Moore® Super Hide® Zero VOC Interior Eggshell 357
52 Benjamin Moore® Ultra Spec® 500 Interior Eggshell Finish N538
52 Benjamin Moore® Eco Spec® WB Interior Eggshell Finish N374
52 Benjamin Moore® Regal® Classic Premium Interior Eggshell Finish N319
52 X-Green™ Benjamin Moore® Eco Spec® WB Interior Eggshell Finish N374
52 X-Green™ Benjamin Moore® Ultra Spec® 500 Interior Eggshell Finish N538
52 X-Green™ Benjamin Moore® Super Hide® Zero VOC Interior Eggshell 357
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 145
†For the most up-to-date MPI specifications, visit www.mpi.net
Approved Products MPI Standards
MPI# Product Type Listing Mfr Label Product Name Code
53 Latex, Interior, Flat (MPI Gloss Level 1) Benjamin Moore® Regal® Classic Premium Interior Flat Finish N215
53 Benjamin Moore® Regal® Select Waterborne Interior Flat Finish 547
53 Benjamin Moore® ben® Waterborne Interior Flat Finish W625
53 Benjamin Moore® Ultra Spec® 500 Interior Flat Finish N536
53 Benjamin Moore® Regal® Classic Premium Interior Matte Finish N221
53 Benjamin Moore® Super Hide® Zero VOC Interior Flat 355
53 Benjamin Moore® Regal® Select Waterborne Interior Matte Finish 548
53 Benjamin Moore® Eco Spec® WB Silver Interior Flat Finish 473
53 Benjamin Moore® Eco Spec® WB Interior Flat Finish N373
53 Benjamin Moore® Aura® Waterborne Interior Matte Finish 522
53 Benjamin Moore® Coronado® Super Kote 5000® Latex Flat 28
53 Benjamin Moore® Natura® Waterborne Interior Flat Finish 512
53 X-Green™ Benjamin Moore® Eco Spec® WB Interior Flat Finish N373
53 X-Green™ Benjamin Moore® Regal® Select Waterborne Interior Flat Finish 547
53 X-Green™ Benjamin Moore® Super Hide® Zero VOC Interior Flat 355
53 X-Green™ Benjamin Moore® Regal® Select Waterborne Interior Matte Finish 548
53 X-Green™ Benjamin Moore® Eco Spec® WB Silver Interior Flat Finish 473
53 X-Green™ Benjamin Moore® Natura® Waterborne Interior Flat Finish 512
53 X-Green™ Benjamin Moore® Aura® Waterborne Interior Mattel Finish 522
53 X-Green™ Benjamin Moore® Aura® Waterborne Interior Matte finish 522
53 X-Green™ Benjamin Moore® ben® Waterborne Interior Flat Finish W625
53 X-Green™ Benjamin Moore® Ultra Spec® 500 Interior Flat Finish N536
53 X-Green™ Benjamin Moore® Coronado® Super Kote 5000® Zero 501
54 Latex, Interior, Semi-Gloss (MPI Gloss Level 5) Benjamin Moore® Ultra Spec® 500 Interior Gloss Finish N540
54 Benjamin Moore® Aura® Waterborne Interior Semi Gloss Finish 528
54 Benjamin Moore® Natura® Waterborne Interior Semi-Gloss Finish 514
54 Benjamin Moore® Regal® Classic Premium Interior Semi-Gloss Finish N333
54 Benjamin Moore® Regal® Select Waterborne Interior Semi-Gloss Finish 551
53 Benjamin Moore® Coronado® Super Kote 5000® Latex Semi-Gloss 32
54 Benjamin Moore® Eco Spec® WB Interior Semi-Gloss Finish N376
54 X-Green™ Benjamin Moore® Eco Spec® WB Interior Semi-Gloss Finish N376
54 X-Green™ Benjamin Moore® Regal® Select Waterborne Interior Semi Gloss Finish 551
54 X-Green™ Benjamin Moore® Ultra Spec® 500 Interior Gloss Finish N540
54 X-Green™ Benjamin Moore® Aura® Waterborne Interior Semi-Gloss Finish 528
54 X-Green™ Benjamin Moore® Natura® Waterborne Interior Semi Gloss Finish 514
55 Dry Fall, Alkyd, Flat Benjamin Moore® Coronado® Super Kote 5000 Dry Fall Alkyd Flat 105
56 Varnish, Interior, Polyurethane, Oil Modified, Gloss Benjamin Moore® Lenmar® Polyurethane High Gloss Finish 1Y-359
57 Varnish, Interior, Polyurethane, Oil Modified, Satin Benjamin Moore® Lenmar® Polyurethane Satin Finish 1Y-354
TuffCrete® Solvent Based Acrylic Concrete Stain &
58 Stain, for Concrete Floors Benjamin Moore® Insl-x® CST-5100
Waterproofing Sealer
58 Benjamin Moore® Insl-x® TuffCrete® Waterborne Acrylic Concrete Stain CST-2110
61 Benjamin Moore® Ultra Spec® Latex Vapor Barrier Sealer 573
64 Fire Retardant Coating, Latex, Interior, Flat (ULC/UL Approved) Benjamin Moore® Insl-x® Fire Retardant Coating Latex Intumescent Flat Finish LFR-110
69 Primer, Bonding, Solvent Based Benjamin Moore® Insl-x® Prime Lock® Plus Alkyd Primer/Sealer PS8000
Polyurethane, Two-Component, Pigmented, Gloss (MPI Gloss
72 Benjamin Moore® Corotech® Aliphatic Acrylic Urethane Gloss V500
Level 6-7)
78 Varnish, Aliphatic Polyurethane, Two-Component Benjamin Moore® Corotech® Aliphatic Acrylic Urethane Gloss V500
78 Benjamin Moore® Corotech® Aliphatic Acrylic Urethane V515
79 Primer, Alkyd, Anti-Corrosive for Metal Benjamin Moore® Coronado® Rust Scat® Alkyd Metal Primer 35
79 Benjamin Moore® Corotech® Alkyd Fabrication Primer V140
79 Benjamin Moore® Super Spec HP® D.T.M. Alkyd Low Lustre Enamel P23
79 Benjamin Moore® Super Spec HP® Alkyd Metal Primer P06
81 Alkyd, Quick Dry, Semi-Gloss Benjamin Moore® Corotech Quick Dry Alkyd Semi-Gloss Enamel V231
81 Benjamin Moore® Super Spec HP® D.T.M. Alkyd Semi-Gloss Enamel P24
82 Epoxy Deck Coating (Slip-Resistant) Benjamin Moore® Corotech® Polyamide Epoxy Gloss Coating V400+NSA
83 Polyurethane Deck Coating (Slip-Resistant) Benjamin Moore® Corotech® Aliphatic Acrylic Urethane V515 + NSA
83 Benjamin Moore® Corotech® Aliphatic Acrylic Urethane Semi-Gloss V510-NSA
83 Benjamin Moore® Corotech® Aliphatic Acrylic Urethane Gloss V500-NSA
96 Alkyd, Quick Dry, Gloss Benjamin Moore® Corotech® Quick Dry Alkyd Gloss Enamel V230
96 Benjamin Moore® Corotech® High Solids Quick Dry Gloss Enamel V225
96 Benjamin Moore® Corotech® Rapid Dry Gloss Coating V220
146 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Approved Products MPI Standards
MPI# Product Type Listing Mfr Label Product Name Code
Useful Information
97 Traffic Marking Paint, Latex Benjamin Moore® Insl-x® Latex Traffic Paint TP-22xx
97 Benjamin Moore® Insl-x® Latex Traffic Paint TP-32xx
97 Benjamin Moore® Insl-x® Acrylic Fast-Set Traffic Paint TP-23xx
98 Epoxy, High Build, Gloss Benjamin Moore® Corotech® Polyamide Epoxy Gloss Coating V400
Tuffcrete® Solvent Acrylic Concrete Stain &
104 Sealer, Solvent Based, for Concrete Floors Benjamin Moore® Insl-x® CST-5100
Waterproofing Sealer Clear
105 Graffiti Protection Top-Coat Benjamin Moore® Corotech® Aliphatic Acrylic Urethane V515
105 Benjamin Moore® Corotech® Acrylic, Aliphatic Urethane Gloss V500
105 Benjamin Moore® Corotech® Waterborne Urethane Gloss Coating V540
107 Primer, Rust-Inhibitive, Water Based Benjamin Moore® Ultra Spec® HP Acrylic Metal Primer P04
107 Benjamin Moore® Coronado® Rust Scat® Acrylic Metal Primer 36
107 X-Green™ Benjamin Moore® Ultra Spec® HP Acrylic Metal Primer P04
108 Epoxy, High Build, Low Gloss Benjamin Moore® Corotech® Polyamide Epoxy Semi-Gloss Coating V400/V400-91
114 Latex, Interior, Gloss (MPI GLoss Level 6) Benjamin Moore® Ultra Spec® HP D.T.M. Acrylic Gloss Enamel HP28
114 Benjamin Moore® Coronado® Rust Scat® Acrylic Gloss Enamel 80
114 Benjamin Moore® Corotech® Quick Dry Acrylic Spray D.T.M. Gloss V300
114 Benjamin Moore® Imprevex® Latex High Gloss Enamel W309
114 X-Green™ Benjamin Moore® Imprevex® Latex High Gloss Enamel W309
116 Benjamin Moore® Corotech® Epoxy Mastic Coating V160
117 Water Repellant, Clear (Not Paintable) Benjamin Moore® Coronado® Texcrete® Silicone Water Repellent 194
118 Dry Fall, Latex, Flat Benjamin Moore® Coronado® Super Kote 5000® Dry Fall Latex Flat N110
118 Benjamin Moore® Benjamin Moore® Dry Fall Latex Dry Fall Flat 395
119 Latex, Exterior, Gloss (MPI Gloss Level 6) Benjamin Moore® Impervex® Latex High Gloss W309
121 Benjamin Moore® Benwood® Stays Clear® Acrylic Polyurethane Low Lustre N423
121 Top-Coat for Multicolored Coating, Clear Benjamin Moore® Lenmar® Aqua-Plastic® Waterborne Urethane 1WB Line
128 Varnish, Water Based, Clear, Satin Benjamin Moore® Lenmar® Aqua-Plastic® Urethane Satin 1WB.1427
129 Varnish, Water Based, Clear, Semi-Gloss Benjamin Moore® Lenmar® Aqua-Plastic® Urethane Semi-Gloss 1WB.1410
130 Varnish, Water Based, Clear, High Gloss (MPI Gloss Level 6-7) Benjamin Moore® Lenmar® Aqua-Plastic® Urethane Gloss 1WB.1400
130 Benjamin Moore® Benwood® Stays Clear® Acrylic Polyurethane High Gloss N422
134 Benjamin Moore® Ultra Spec® HP Acrylic Metal Primer HP04
136 Primer, Stain Blocking, Solvent Based Benjamin Moore® Insl-x® Odorless Alkyd Primer Sealer NO-4000
136 Benjamin Moore® Fresh Start® Multi Purpose Oil Based Primer o24
137 Primer, Stain Blocking, Water Based Benjamin Moore® Fresh Start® Multi-Purpose Latex Primer N023
137 Benjamin Moore® Fresh Start® High-Hiding All Purpose Primer o46
137 Benjamin Moore® Sure Seal® Latex Primer Sealer o27
137 X-Green™ Benjamin Moore® Fresh Start® Multi-Purpose Latex Primer N023
137 X-Green™ Benjamin Moore® Fresh Start® High-Hiding All Purpose Primer o46
137 X-Green™ Benjamin Moore® Sure Seal® Latex Primer Sealer o27
138 Latex, Interior, High Performance Architectural, (MPI Gloss Level 2) Benjamin Moore® Aura® Waterborne Interior Eggshell Finish 524
138 Benjamin Moore® Ultra Spec® 500 Interior Low Sheen Finish N537
138 Benjamin Moore® Regal® Select Waterborne Interior Eggshell Finish 549
138 X-Green™ Benjamin Moore® Regal® Select Waterborne Interior Eggshell Finish 549
138 X-Green™ Benjamin Moore® Aura® Waterborne Interior Eggshell Finish 524
138 X-Green™ Benjamin Moore® Ultra Spec® 500 Interior Low Sheen Finish N537
139 Latex, Interior, High Performance Architectural, (MPI Gloss Level 3) Benjamin Moore® Regal® Classic Premium Interior Eggshell Finish N319
139 Benjamin Moore® Ultra Spec® 500 Interior Eggshell Finish N538
139 X-Green Benjamin Moore® Ultra Spec® 500 Interior Eggshell Finish N538
140 Latex, Interior, High Performance Architectural, (MPI Gloss Level 4) Benjamin Moore® Aura® Waterborne Interior Satin Finish 526
140 Benjamin Moore® Ultra Spec® 500 Interior Semi Gloss Finish N539
140 Benjamin Moore® Regal® Select Waterborne Interior Pearl Finish 550
140 Benjamin Moore® Insl-x® Cabinet Coat Urethane Acrylic Satin Enamel CC-45XX
140 X-Green™ Benjamin Moore® Aura® Waterborne Interior Satin Finish 526
140 X-Green™ Benjamin Moore® Regal® Select Waterborne Interior Pearl Finish 550
140 X-Green™ Benjamin Moore® Ultra Spec® 500 Interior Semi-Gloss Finish N539
Latex, Interior, High Performance Architectural, Semi-Gloss (MPI
141 Benjamin Moore® Ultra Spec® HP D.T.M. Acrylic Low Lustre Enamel HP25
Gloss Level 5)
141 Benjamin Moore® Ultra Spec® HP D.T.M. Acrylic Semi-Gloss Enamel HP29
141 Benjamin Moore® Natura® Waterborne Interior Semi Gloss Finish 514
Cabinet Coat Urethane Acrylic Semi-Gloss Enamel
141 Benjamin Moore® Insl-x® CC-46XX
CC
141 Benjamin Moore® Ultra Spec® 500 Interior Gloss Finish N540
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 147
†For the most up-to-date MPI specifications, visit www.mpi.net
Approved Products MPI Standards
MPI# Product Type Listing Mfr Label Product Name Code
141 Benjamin Moore® Aura® Waterborne Interior Semi Gloss Finish 528
141 Benjamin Moore® Regal® Select Waterborne Interior Semi-Gloss Finish 551
141 X-Green™ Benjamin Moore® Regal® Select Waterborne Interior Semi-Gloss Finish 551
141 X-Green™ Benjamin Moore® Aura® Waterborne Interior Semi-Gloss Finish 528
141 X-Green™ Benjamin Moore® Ultra Spec® 500 Interior Gloss Finish N540
141 X-Green™ Benjamin Moore® Natura® Waterborne Interior Semi Gloss Finish 514
143 Latex, Interior, Institutional Low Odor/VOC, Flat (MPI Gloss Level 1) Benjamin Moore® Regal® Select Waterborne Interior Matte Finish 548
143 Benjamin Moore® Natura® Waterborne Interior Flat Finish 512
143 Benjamin Moore® Aura® Waterborne Interior Matte Finish 522
143 Benjamin Moore® Regal® Select Waterborne Interior Flat Finish 547
143 Benjamin Moore® Eco Spec® WB Interior Flat Finish N373
143 Benjamin Moore® Eco Spec® WB Silver Interior Flat Finish 473
143 Benjamin Moore® Ultra Spec® 500 Interior Flat Finish N536
143 X-Green™ Benjamin Moore® Ultra Spec® 500 Interior Flat Finish N536
143 X-Green™ Benjamin Moore® Aura® Waterborne Interior Matte Finish 522
143 X-Green™ Benjamin Moore® Natura® Waterborne Interior Flat Finish 512
143 X-Green™ Benjamin Moore® Regal® Select Waterborne Interior Flat Finish 547
143 X-Green™ Benjamin Moore® Eco Spec® WB Interior Flat Finish N373
143 X-Green™ Benjamin Moore® Eco Spec® WB Silver Interior Flat Finish 473
143 X-Green™ Benjamin Moore® Regal® Select Waterborne Interior Matte Finish 548
144 Latex, Interior, Institutional Low Odor/VOC, (MPI Gloss Level 2) Benjamin Moore® Natura® Waterborne Interior Eggshell Finish 513
144 Benjamin Moore® Ultra Spec® 500 Interior Low Sheen Finish N537
144 Benjamin Moore® Regal® Select Waterborne Interior Eggshell Finish 549
144 X-Green™ Benjamin Moore® Natura® Waterborne Interior Eggshell Finish 513
144 X-Green™ Benjamin Moore® Ultra Spec® 500 Interior Low Sheen Finish N537
144 X-Green™ Benjamin Moore® Regal® Select Waterborne Interior Eggshell Finish 549
145 Latex, Interior, Institutional Low Odor/VOC, ( MPI Gloss Level 3) Benjamin Moore® Ultra Spec® 500 Interior Eggshell Finish N538
145 X-Green™ Benjamin Moore® Ultra Spec® 500 Interior Eggshell Finish N538
146 Latex, Interior, Institutional Low Odor/VOC, (MPI Gloss Level 4) Benjamin Moore® Ultra Spec® 500 Interior Semi Gloss Finish N539
146 X-Green™ Benjamin Moore® Ultra Spec® 500 Interior Semi Gloss Finish N539
147 Latex, Interior, Institutional Low Odor/VOC, Semi-Gloss
(MPI Gloss Waterborne Interior
Benjamin Moore ® Aura® 528
Level 5) Semi-Gloss Finish
147 Benjamin Moore® Ultra Spec® 500 Interior Gloss Finish N540
147 Benjamin Moore® Regal® Select Waterborne Interior Semi-Gloss Finish 551
147 X-Green™ Benjamin Moore® Regal® Select Waterborne Interior Semi-Gloss Finish 551
147 X-Green™ Benjamin Moore® Aura® Waterborne Interior Semi-Gloss Finish 528
147 X-Green™ Benjamin Moore® Ultra Spec® 500 Interior Gloss Finish N540
149 Primer Sealer, Interior, Institutional Low Odor/VOC Benjamin Moore® Ultra Spec® 500 Interior Latex Primer N534
149 Benjamin Moore® Eco Spec® WB Interior Primer N372
149 Benjamin Moore® Natura® Zero VOC Interior Primer 511
149 X-Green™ Benjamin Moore® Eco Spec® WB Interior Primer N372
149 X-Green™ Benjamin Moore® Ultra Spec® 500 Interior Latex Primer N534
149 X-Green™ Benjamin Moore® Natura® Zero VOC Interior Primer 511
151 Light Industrial Coating, Interior, Water Based (MPI Gloss Level 3) Benjamin Moore® Corotech® Pre-Catalyzed Epoxy Eggshell V342
153 Light Industrial Coating, Interior, Water Based, Semi-Gloss
(MPI Gloss D.T.M. Acrylic Low Lustre
Benjamin Moore ® Ultra Spec® HP HP25
Level 5) Enamel
153 Benjamin Moore® Super Spec HP® D.T.M. Acrylic Semi-Gloss HP29
153 Benjamin Moore® Coronado® Rust Scat® Acrylic Semi-Gloss Enamel 90
153 Benjamin Moore® Corotech® Acrylic D.T.M. Semi-Gloss Enamel V331
154 Benjamin Moore® Coronado® Rust Scat® Acrylic Gloss Enamel 80
154 Benjamin Moore® Ultra Spec® HP D.T.M. Acrylic Gloss Enamel HP28
154 Benjamin Moore® Corotech® Acrylic D.T.M. Gloss Enamel V330
155 Dry Fall, Latex (MPI Gloss Level 3 Benjamin Moore® Coronado® Super Kote 5000 Latex Dry Fall Eggshell 122
155 Benjamin Moore® Latex Dry Fall Eggshell 396
Maxum Semi-Transparent Acrylic Deck & Siding
156 Stain, Exterior, Water Based, Semi-Transparent Benjamin Moore® Coronado® B7600
Stain
156 Benjamin Moore® Arborcoat® Waterborne Semi-transparent Deck & Siding Stain N638
156 Benjamin Moore® Arborcoat® Waterborne Translucent Deck & Siding Stain W623
165 Benjamin Moore® Advance® Interior Matte Finish 791
148 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Approved Products MPI Standards
MPI# Product Type Listing Mfr Label Product Name Code
Useful Information
172 Alkyd, Water Based, Primer, Interior Benjamin Moore® Advance® Waterborne Alkyd Primer 790
172 X-Green Alkyd, Water Based, Primer, Interior Benjamin Moore® Advance® Waterborne Alkyd Primer 790
Polyurethane, Two-Component, Pigmented, Semi-Gloss (Gloss
174 Benjamin Moore ® Corotech® Aliphatic Acrylic Urethane Semi-Gloss V510
Level 5)
177 Epoxy, Semi-Gloss (MPI Gloss Level 5) Benjamin Moore® Corotech® Polyamide Epoxy V400-91
181 Varnish, Water Based, Clear MPI Gloss Level 3 Benjamin Moore® Lenmar® Aqua-Plastic® Waterborne Urethane Clear Dull 1WB.1420
186 Stain, Interior, Water Based, Semi-Transparent Benjamin Moore® Lenmar® Interior Waterborne Wiping Wood Stain 1WB-1300
205 Benjamin Moore® Corotech® Aliphatic Acrylic Urethane Gloss V500
205 Benjamin Moore® Corotech® Aliphatic Acrylic Urethane V515
205 Benjamin Moore® Corotech® Waterborne Urethane V540
214 Latex, Exterior (MPI Gloss Level 2) Benjamin Moore® Regal® Select Exterior low lustre finish W103
214 Benjamin Moore® Ultra Spec® EXT Exterior low lustre finish N455
214 Benjamin Moore® Coronado® Super Kote 5000® Exterior 803
226 Dry Fall, Latex, Semi-Gloss (MPI Gloss Level 5) Benjamin Moore® Coronado® Super Kote 5000® Dry Fall Latex Semi-Gloss 112
226 Benjamin Moore® Benjamin Moore® Dry Fall Latex Dry Fall Semi-Gloss 397
226 Benjamin Moore® Benjamin Moore® Dry Fall Latex Dry Fall Semi-Gloss 397
Latex, High Performance Architectural, Semi-Gloss (MPI Gloss
256 Benjamin Moore® Regal Select® Waterborne Exterior Semi-Gloss Finish N403
Level 5)
Latex, Exterior, High Performance Architectural, Low Sheen (MPI
315 Benjamin Moore ® Aura® Waterborne Exterior Low Lustre Finish 634
Gloss Level 3-4)
315 Benjamin Moore® Regal® Select Exterior High-Buid Low Lustre Finish N401
315 Benjamin Moore® Regal® Select Exterior High-Buid Low Lustre Finish N401
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 149
†For the most up-to-date MPI specifications, visit www.mpi.net
Products that Qualify for LEED V4 Credit as Low-Emitting
Materials/Qualifies for CHPS low emitting credit
Label Product Name Product Code Label Product Name Product Code
Aura® Waterborne Interior Matte Finish 522 Eco Spec® WB Silver Interior Semi-Gloss Finish 476
Aura® Waterborne Interior Eggshell Finish 524 Super Hide® Zero VOC Interior Flat 355
Aura® Waterborne Interior Satin Finish 526 Super Hide® Zero VOC Interior Low-Sheen 356
Aura® Waterborne Interior Semi-Gloss Finish 528 Super Hide® Zero VOC Interior Eggshell 357
Waterborne Interior Bath & Spa Super Hide® Zero VOC Interior Semi-Gloss 358
Aura® 532
Matte Finish
Century Interior Paint Soft Touch Matte 030 Ultra Spec® HP Acrylic Metal Primer HP04
Natura® Waterborne Interior Flat Finish 512 Ultra Spec® HP D.T.M. Acrylic Low Lustre Enamel HP25**
Natura® Waterborne Interior Eggshell Finish 513 Ultra Spec® HP D.T.M. Acrylic Gloss Enamel HP28**
Natura® Waterborne Interior Semi-Gloss Finish 514 Ultra Spec® HP D.T.M. Acrylic Semi-Gloss HP29**
Regal® Select Waterborne interior Flat Finish 547 Benjamin Moore® Knock down Flat 343
Regal® Select Waterborne Interior Matte Finish 548 Benjamin Moore® Knock down Satin 344
Regal® Select Waterborne Interior Eggshell Finish 549 Fresh Start® Multi-Purpose Latex Primer N023
Regal® Select Waterborne Interior Pearl Finish 550 Fresh Start® High-Hiding All Purpose Primer 46
Regal® Select Waterborne Interior Semi-Gloss Finish 551 Fresh Start® Natura® Zero VOC Interior Primer 511
Masonry Interior/Exterior High-Build
Benjamin Moore® Waterborne Ceiling Paint 508 Ultra Spec® 571
Block Filler
Ultra Spec Masonry Int/Ext 100%
Impervex® Latex High Gloss Enamel W309 Ultra Spec® 608
Acrylic Sealer
ben® Waterborne Interior Flat Finish W625 Ultra Spec Masonry Int/Ext Acrylic
Ultra Spec® 609
High Build Masonry Primer
ben® Waterborne Interior Eggshell Finish W626 Benwood® Stays Clear® Acrylic Polyurethane - High Gloss N422***
ben® Waterborne Interior Semi-Gloss Finish W627 Benwood® Stays Clear® Acrylic Polyurethane - Low Lustre N423***
Advance® Waterborne Interior Alkyd Primer 790 Benwood® Stays Clear® Acrylic Polyurethane - Flat N425***
Advance® Waterborne Alkyd Satin 792 Ultra Spec® SCUFF-X™ Interior Matte Finish 484
Ultra Spec® 500 Interior Latex Primer N534 Ultra Spec® SCUFF-X™ Interior Eggshell Finish 485
Ultra Spec® 500 Interior Flat Finish N536 Ultra Spec® SCUFF-X™ Interior Satin Finish 486
Ultra Spec® 500 Interior Low Sheen Finish N537 Chalkboard Paint 308
Ultra Spec® 500 Interior Eggshell Finish N538 Super Kote 5000® Interior Primer
Coronado® Super Kote 5000® 40
sealer
Ultra Spec® 500 Interior Semi-Gloss Finish N539 Coronado® Super Kote 5000® Super Kote 5000® Block filler 958
Ultra Spec® 500 Interior Gloss Finish N540 Super Kote 5000® zero VOC interior
Coronado® Super Kote 5000® 501
flat
Eco Spec® WB Interior Primer N372 Super Kote 5000® zero VOC interior
Coronado® Super Kote 5000® 502
eggshell
Eco Spec® WB Interior Flat Finish N373 Super Kote 5000® zero VOC interior
Coronado® Super Kote 5000® 503
satin
Eco Spec® WB Interior Eggshell Finish N374
Super Kote 5000® zero VOC interior
Coronado® Super Kote 5000® 504
Eco Spec® WB Interior Semi-Gloss Finish N376 semi-gloss
Corotech® Waterborne Urethane V540
Eco Spec® WB Silver Interior Flat Finish 473
150 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Product Index By Brand
Code Product Name Type Use Page
Benjamin Moore®
0024 Fresh Start® Multi-Purpose Oil-Based Primer O Int/Ext 10
027 Sure Seal® Latex Primer Sealer L Int/Ext 11
0030 CENTURY® L Int 9
0046 Fresh Start® High-Hiding All Purpose Primer L Int/Ext 10
0094 Fresh Start® Exterior Wood Primer O Ext 10
0100 Fresh Start® MoorWhite® Exterior Wood Primer O Ext 10
121 Floor & Patio Latex Enamel High Gloss L Int/Ext 20
147 Aura® Grand Entrance® Satin Finish O Int/Ext 31
Product Index
148 Aura® Grand Entrance® High Gloss Finish O Int/Ext 31
0176 Super Spec® Exterior Alkyd Primer O Ext 38
0217 Fresh Start® Enamel Underbody Primer O Int 10
0244 Benjamin Moore® Block Filler L Int/Ext 36
0253 Super Spec® Latex Enamel Undercoater and Primer Sealer L Int 38
258 Muresco® Ceiling Paint L Int 19
0275 Super Spec® Interior Latex Flat Finish L Int 39
0276 Super Spec® Interior Latex Semi-Gloss Finish L Int 39
0277 Super Spec® Interior Latex Pearl Finish L Int 39
0281 Super Spec® Interior 100% Acrylic Semi-Gloss Enamel L Int 39
0306 Super Spec® Alkyd Calcimine Recoater O Int 38
0307 Studio Finishes® Chalkboard Paint L Int 25
0308 Chalkboard Paint L Int 24
0311 Studio Finishes® Latex Glitter Effect L Int 25
0313 Composite Deck Cleaner NA Ext 34
0315 Remove NA Ext 34
0317 Brightener & Neutralizer NA Ext 34
0320 Arborcoat® Waterproofer L Ext 32
0343 Benjamin Moore® Acrylic Knockdown Flat L Int 36
0344 Benjamin Moore® Acrylic Knockdown Satin L Int 36
0354 Super Hide® Zero VOC Interior Primer L Int 37
0355 Super Hide® Zero VOC Interior Flat L Int 37
0356 Super Hide® Zero VOC Low Sheen L Int 37
0357 Super Hide® Zero VOC Interior Eggshell L Int 37
0358 Super Hide® Zero VOC Interior Semi-Gloss L Int 37
0359 Ultra Spec® Masonry 100% Acrylic Elastomeric Coating Flat L Ext 46
0360 Ultra Spec® Masonry 100% Acrylic Elastomeric Coating Low Lustre L Ext 46
0366 Arborcoat® Exterior Oil Primer O Ext 33
0386 Studio Finishes® Latex Texture - Sand L Int 25
Key: L=Latex O=Alkyd/Oil S=Other/Special Int=For Interior Use Ext=For Exterior Use N/A=Not Applicable
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 151
†For the most up-to-date MPI specifications, visit www.mpi.net
Product Index By Brand
Code Product Name Type Use Page
Benjamin Moore®
0395 Benjamin Moore® Dry Fall Latex Flat L Int 36
0396 Benjamin Moore® Dry Fall Latex Eggshell L Int 36
0397 Benjamin Moore® Dry Fall Latex Semi-Gloss L Int 36
0408 Studio Finishes® Latex Glaze Extender L Int 25
0409 Studio Finishes® Alkyd Glaze O Int 25
0450 Ultra Spec® Exterior Acrylic Solid Color Stain L Ext 50
0452 Ultra Spec® Masonry Acrylic Latex Satin - FIL L Int/Ext 45
0473 Eco Spec® WB Silver Flat Finish L Int 42
0474 Eco Spec® WB Silver Eggshell Finish L Int 42
0476 Eco Spec® WB Silver Semi-Gloss Finish L Int 42
0484 Ultra Spec® SCUFF-X® Interior Matte Finish L Int 47
0485 Ultra Spec® SCUFF-X® Interior Eggshell Finish L Int 47
0486 Ultra Spec® SCUFF-X® Interior Satin Finish L Int 47
0508 Waterborne Ceiling Paint L Int 19
0511 Fresh Start® Natura® Zero VOC Primer L Int 10
0512 Natura® Waterborne Interior Paint Flat Finish L Int 14
0513 Natura® Waterborne Interior Paint Eggshell Finish L Int 14
0514 Natura® Waterborne Interior Paint Semi-Gloss Finish L Int 14
518 Extender NA Int/Ext 35
0521 Aura®Waterborne Interior/Exterior Color Foundation L Int/Ext 12 & 26
0522 Aura® Waterborne Interior Matte Finish L Int 12
0524 Aura®Waterborne Interior Eggshell Finish L Int 12
0526 Aura® Waterborne Interior Satin Finish L Int 12
0528 Aura® Waterborne Interior Semi-Gloss Finish L Int 12
0532 Aura® Bath & Spa Matte Finish L Int 13
0541 ben® Waterborne Exterior Flat Finish L Ext 30
0542 ben® Waterborne Exterior Low Lustre Finish L Ext 30
0543 ben® Waterborne Exterior Soft-Gloss Finish L Ext 30
0544 Regal® Select Exterior REVIVE™ for Vinyl Siding L Ext 29
0547 Regal®Select Waterborne Interior Flat Finish L Int 15
0548 Regal®Select Waterborne Interior Matte Finish L Int 15
0549 Regal® Select Waterborne Interior Eggshell Finish L Int 15
0550 Regal® Select Waterborne Interior Pearl Finish L Int 15
0551 Regal® Select Waterborne Interior Semi-Gloss Finish L Int 15
0571 Ultra Spec® Masonry Int/Ext Hi-Build Block Filler L Int/Ext 45
0573 Ultra Spec® Latex Vapor Barrier Primer Sealer L Int 44
0580 Super Spec® Prep Coat Hi-Build Latex Interior Primer L Int 44
Key: L=Latex O=Alkyd/Oil S=Other/Special Int=For Interior Use Ext=For Exterior Use N/A=Not Applicable
152 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Product Index By Brand
Code Product Name Type Use Page
Benjamin Moore®
0608 Ultra Spec® Masonry Interior/Exterior 100% Acrylic Sealer L Int/Ext 45
0609 Ultra Spec® Masonry Interior/Exterior 100% Acrylic High Build Masonry Sealer L Int/Ext 45
0610 Arborcoat® Ultra Flat Solid Siding Stain L Ext 32
0620 Studio Finishes® Latex Metallic Glaze L Int 25
0621 Studio Finishes® Molten Metallics® O Int/Ext 25
0629 Aura® Waterborne Exterior Flat Finish L Ext 26
0631 Aura® Waterborne Exterior Satin Finish L Ext 26
0632 Aura® Waterborne Exterior Semi-Gloss Finish L Ext 26
Product Index
0634 Aura® Waterborne Exterior Low Lustre Finish L Ext 26
0636 Arborcoat® Protective Clear Coat S Ext 32
0639 Arborcoat® Semi-Solid Deck & Siding Stain S Ext 32
0640 Arborcoat® Solid Deck & Siding Stain L Ext 32
0790 Advance® Primer S Int 18
0791 Advance® Matte Finish S Int 18
0792 Advance® Satin Finish S Int 18
0793 Advance® Semi-Gloss Finish S Int 18
0326/C326 Arborcoat® Alkyd Translucent Deck & Siding Stain O Ext 33
0328/C328 Arborcoat® Alkyd Semi-Transparent Deck & Siding Stain O Ext 33
0329/C329 Arborcoat® Alkyd Semi-Solid Deck & Siding Stain O Ext 33
C235 Satin Impervo® O Int 22
C271 Super Spec® Alkyd Semi-Gloss Enamel O Int 39
C274 Super Spec® Interior Latex Eggshell Finish L Int 39
HP04 Acrylic Metal Primer L Int/Ext 51
HP25 Ultra Spec® HP D.T.M. Acrylic Low Lustre Enamel L Int/Ext 51
HP28 Ultra Spec® HP D.T.M. Acrylic Gloss Enamel L Int/Ext 51
HP29 Ultra Spec® HP D.T.M. Acrylic Semi-Gloss Enamel L Int/Ext 51
N023 Fresh Start® Multi-Purpose Latex Primer L Int/Ext 10
N122 Floor & Patio Latex Enamel Low Sheen L Int/Ext 20
N215 Regal® Classic Premium Interior Flat Finish L Int 16
N216 Regal® Classic Premium Interior Primer L Int 16
N221 Regal® Classic Premium Interior Matte Finish L Int 16
N310 Regal® Classic Premium Interior Pearl Finish L Int 16
N314 Waterborne Satin Impervo® L Int 22
N316 Restore NA Ext 34
N318 Multi-Purpose Cleaner NA Ext 34
N319 Regal® Classic Premium Interior Eggshell Finish L Int 16
N333 Regal® Classic Premium Interior Semi-Gloss Finish L Int 16
Key: L=Latex O=Alkyd/Oil S=Other/Special Int=For Interior Use Ext=For Exterior Use N/A=Not Applicable
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 153
†For the most up-to-date MPI specifications, visit www.mpi.net
Product Index By Brand
Code Product Name Type Use Page
Benjamin Moore®
N372 Eco Spec® WB Primer L Int 43
N373 Eco Spec® WB Flat Finish L Int 43
N374 Eco Spec® WB Eggshell Finish L Int 43
N376 Eco Spec® WB Semi-Gloss Finish L Int 43
N400 Regal® Select Exterior High-Build Flat Finish L Ext 28
N401 Regal® Select Exterior High-Build Low Lustre Finish L Ext 28
N403 Regal® Select Exterior High-Build Soft Gloss Finish L Ext 28
N405 Studio Finishes® Latex Glaze L Int 25
N422 Benwood® Stays Clear® Acrylic Polyurethane, Gloss L Int 21
N423 Benwood® Stays Clear® Acrylic Polyurethane, Low Lustre L Int 21
N425 Benwood® Stays Clear® Acrylic Polyurethane, Flat L Int 21
N447 Ultra Spec® EXT Flat Finish L Ext 49
N448 Ultra Spec® EXT Satin Finish L Ext 49
N449 Ultra Spec® EXT Gloss Finish L Ext 49
N455 Ultra Spec® EXT Low Lustre Finish L Ext 49
N534 Ultra Spec® 500 Interior Latex Primer L Int 48
N536 Ultra Spec® 500 Interior Flat Finish L Int 48
N537 Ultra Spec® 500 Interior Low Sheen Finish L Int 48
N538 Ultra Spec® 500 Interior Eggshell Finish L Int 48
N539 Ultra Spec® 500 Interior Semi-Gloss Finish L Int 48
N540 Ultra Spec® 500 Interior Gloss Finish L Int 48
N558 Ultra Spec® EXT Latex Primer L Ext 49
N638 Arborcoat® Semi-Transparent Deck & Siding Stain S Ext 32
N794 Advance® High Gloss Finish S Int/Ext 18
P06 Super Spec® HP Alkyd Metal Primer O Int/Ext 40
P22 Super Spec® HP Urethane Alkyd Gloss Enamel O Int/Ext 40
P23 Super Spec® HP D.T.M. Alkyd Low Lustre Enamel O Int/Ext 41
P24 Super Spec® HP D.T.M. Alkyd Semi-Gloss Enamel O Int/Ext 41
W096 Regal® Select Exterior MoorGlo® Soft Gloss Finish L Ext 27
W103 Regal® Select Exterior MoorGard® Low Lustre Finish L Ext 27
W105 Regal® Select Exterior MoorLife® Flat Finish L Ext 27
W309 Impervex® High Gloss Enamel L Int/Ext 23
W322 Kitchen & Bath L Int 24
W623 Arborcoat® Translucent Deck & Siding Stain S Ext 32
W625 ben® Waterborne Interior Flat Finish L Int 17
W626 ben® Waterborne Interior Eggshell Finish L Int 17
W627 ben® Waterborne Interior Semi-Gloss Finish L Int 17
Key: L=Latex O=Alkyd/Oil S=Other/Special Int=For Interior Use Ext=For Exterior Use N/A=Not Applicable
154 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Product Index By Brand
Code Product Name Type Use Page
Coronado®
2 Cryli Cote® 100% Acrylic Exterior Paint Gloss L Ext 92
4 Optimum Hide® Low Odor Ceiling L Int 98
10 Cryli Cote® 100% Acrylic Exterior Paint Flat L Ext 92
13 Rust Scat® Polyurethane Enamel Semi-Gloss O Int/Ext 95
16 Tough Walls Acrylic Paint & Primer Ultra Flat L Int 85
22 Tough Walls Acrylic Paint & Primer Semi-Gloss L Int 85
23 Tough Walls Alkyd Semi-Gloss Enamel O Int 86
24 Tough Walls Acrylic Paint & Primer Flat L Int 85
Product Index
28 Super Kote 5000® Acrylic Latex Paint Flat L Int 88
30 Super Kote 5000® Acrylic Latex Paint Eggshell L Int 88
31 Rust Scat® Polyurethane Enamel Gloss O Int/Ext 95
32 Super Kote 5000® Acrylic Latex Paint Semi-Gloss L Int 88
34 Tough Walls Acrylic Paint & Primer Eggshell L Int 85
35 Rust Scat® Alkyd Metal Primer O Int/Ext 95
36 Rust Scat® Waterborne Acrylic Primer O Int/Ext 94
40 Super Kote 5000® Acrylic Latex Primer L Int 91
48 Elastite® 100% Acrylic Masonry Sealer L Int/Ext 97
60 Tough Walls Acrylic Paint & Primer Satin L Int 85
62 FinalTouch® Flat Wall Paint L Int 98
80 Rust Scat® Waterborne Acrylic Enamel Gloss O Int/Ext 94
88 Super Kote® 1000 Latex Paint Flat L Int 90
90 Rust Scat® Waterborne Acrylic Enamel Semi-Gloss O Int/Ext 94
105 Super Kote 5000® Dry Fall Alkyd Flat O Int 99
112 Super Kote 5000® Dry Fall Semi-Gloss L Int 99
116 Grip & Seal Latex Stain Blocker L Int/Ext 98
160 Elastite® 10 MIL 100% Acrylic Elastomeric Waterproof Coating L Ext 97
162 Elastite® 20 MIL 100% Acrylic Elastomeric Waterproof Coating L Ext 97
166 Elastite® SUPER-STRETCH 20 MIL 100% Acrylic Elastomeric Waterproof Coating L Ext 97
194 Texcrete® Silicone Water Repellent L Ext 96
301 Super Kote® 3000 Latex Paint Flat L Int 89
302 Super Kote® 3000 Latex Paint Eggshell L Int 89
304 Super Kote® 3000 Latex Paint Semi-Gloss L Int 89
410 Cryli Cote® 100% Acrylic Exterior Paint Satin L Ext 92
501 Super Kote 5000® Zero Acrylic Latex Flat L Int 87
502 Super Kote 5000® Zero Acrylic Latex Eggshell L Int 87
503 Super Kote 5000® Zero Acrylic Latex Stain L Int 87
504 Super Kote 5000® Zero Acrylic Latex Semi-Gloss L Int 87
Key: L=Latex O=Alkyd/Oil S=Other/Special Int=For Interior Use Ext=For Exterior Use N/A=Not Applicable
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 155
†For the most up-to-date MPI specifications, visit www.mpi.net
Product Index By Brand
Code Product Name Type Use Page
Coronado®
651 Rust Scat® Polyurethane Enamel Satin O Int/Ext 95
701 Coronado Grand® Interior Acrylic Latex Paint and Primer Matte L Int 84
702 Coronado Grand® Interior Acrylic Latex Paint and Primer Eggshell L Int 84
704 Coronado Grand® Interior Acrylic Latex Paint and Primer Semi-Gloss L Int 84
800 Coronado® Maxum® Deck and Siding Primer O Ext 101
801 Super Kote 5000® Exterior Flat L Ext 93
803 Super Kote 5000® Exterior Satin L Ext 93
804 Super Kote 5000® Exterior Semi-Gloss L Ext 93
908 Super Kote 5000® Acrylic Knock Down Flat L Int 100
918 Super Kote 5000® Acrylic Knock Down Satin L Int 100
948 Super Kote® 3000 Latex Primer L Int 91
1066 Elastite® 100% Acrylic Masonry Sealer L Ext 97
1130 Super Kote 5000® Acrylic Latex Low Sheen Eggshell Wall Paint L Int 88
1160 Super Kote 5000® Acrylic Latex Satin Wall Paint L Int 88
2000 Coronado® Maxum® Solid Color Siding Stain L Ext 101
3192 Texcrete® WB Acrylic Masonry Waterproofer Sand Finish L Ext 96
3194 Texcrete® WB Acrylic Masonry Waterproofer Smooth Finish L Ext 96
3196 Texcrete® WB Acrylic Masonry Waterproofer Medium Finish L Ext 96
7300 Coronado® Maxum® Translucent Deck and Siding O Ext 101
7400 Coronado® Maxum® Translucent Deck and Siding L Ext 101
7500 Coronado® Maxum® Semi-Transparent Deck and Siding O Ext 101
7600 Coronado® Maxum® Semi-Transparent Deck and Siding L Ext 101
8500 Coronado® Maxum® Solid Color Deck Stain L Ext 101
958-11 Super Kote 5000® Production Block Filler L Int/Ext 96
N110 Super Kote 5000® Dry Fall Latex Flat L Int 99
COROTECH®
V027 Clear Acrylic Sealer L Int/Ext 56
V110 Acrylic Metal Primer L Int/Ext 56
V125 Water Reducible Epoxy Ester Primer L Int/Ext 57
V114 Acrylic Block Filler L Int/Ext 78
V131 Universal Metal Primer O Int/Ext 58
V132 Prep All Universal Metal Primer O Int/Ext 58
V133 Alkyd Shop Cote Primer O Int/Ext 59
V140 Alkyd Fabrication Primer O Int/Ext 59
V142 Shop Primer O Int/Ext 60
V150 Polyamide Epoxy Primer S Int/Ext 61
Key: L=Latex O=Alkyd/Oil S=Other/Special Int=For Interior Use Ext=For Exterior Use N/A=Not Applicable
156 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Code Product Name Type Use Page
COROTECH®
V155 100% Solids Epoxy Pre-Primer S Int/Ext 61
V156 Moisture Tolerant Quick Set Epoxy Sealer S Int/Ext 62
V157 Coal Tar Epoxy S Int/Ext 79
V160 Epoxy Mastic S Int/Ext 70
V163 Waterborne Epoxy Block Filler S Int/Ext 78
V165 Epoxy Patch Kit S Int/Ext 70
V170 Organic Zinc Rich Primer S Int/Ext 62
V175 Waterborne Bonding Primer L Int/Ext 57
Product Index
V180 Rust Arrestor S Int/Ext 79
V200 Alkyd Urethane Enamel Gloss O Int/Ext 66
V201 Alkyd Urethane Enamel Semi-Gloss O Int/Ext 66
V210 Water Reducible Alkyd Enamel L Int/Ext 66
V220 Rapid Dry Alkyd Enamel O Int/Ext 67
V225 High Solids Rapid Dry Enamel O Int/Ext 67
V230 Quick Dry Alkyd Enamel Gloss O Int/Ext 68
V231 Quick Dry Alkyd Enamel Semi-Gloss O Int/Ext 68
V260 Electrostatic Alkyd Semi-Gloss Enamel O Int/Ext 69
V264 Silicone Alkyd High Heat Aluminum O Int/Ext 69
V300 Quick Dry Acrylic Spray DTM L Int/Ext 63
V330 Acrylic DTM Enamel Gloss L Int/Ext 64
V331 Acrylic DTM Enamel Semi-Gloss L Int/Ext 64
V341 Pre-Catalyzed Waterborne Epoxy Semi-Gloss S Int 65
V342 Pre-Catalyzed Waterborne Epoxy Eggshell S Int 65
V400 Polyamide Epoxy Coating S Int/Ext 71
V410 Fast Dry Polyamide Epoxy Coating S Int/Ext 71
V430 100% Solids Epoxy Floor Coating S Int 72
V440 Waterborne Amine Epoxy S Int/Ext 72
V450 Waterborne Acrylic Epoxy S Int/Ext 73
V500 Aliphatic Acrylic Urethane Gloss S Int/Ext 75
V510 Aliphatic Acrylic Urethane Semi-Gloss S Int/Ext 75
V515 Aliphatic Urethane Coating S Int/Ext 75
V520 Polyester Urethane S Int/Ext 76
V540 Waterborne Urethane S Int/Ext 76
V580 Aromatic Moisture Cured Urethane S Int 77
V600 Oil & Grease Emulsifier S Int/Ext 80
V610 Citrus Based Cleaner S Int/Ext 80
V620 Concrete & Masonry Etcher S Int/Ext 80
Key: L=Latex O=Alkyd/Oil S=Other/Special Int=For Interior Use Ext=For Exterior Use N/A=Not Applicable
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 157
†For the most up-to-date MPI specifications, visit www.mpi.net
Product Index By Brand
Code Product Name Type Use Page
COROTECH®
V630 Anti-Slip Aggregate NA Int/Ext 74
V700 Urethane Reducer NA NA 81
V701 Brushing Reducer NA NA 81
V703 Xylene NA NA 82
V704 Epoxy Thinner NA NA 82
V705 Alkyd Gloss and Hardness Catalyst NA NA 82
Insl-x®
AMW-1000 Waterblock® Acrylic Masonry Waterproofer L Int/Ext 105
AQ-0400 Aqua Lock® Plus White L Int/Ext 103
AQ-0577 Aqua Lock® Plus Deep Tint L Int/Ext 103
BO-5500 Athletic Field Marking Paste L Ext 108
CC-45XX Cabinet Coat Satin Finish L Int 109
CC-46XX Cabinet Coat Semi-Gloss Finish L Int 109
CR-26XX Chlorinated Rubber Swimming Pool Paint S Ext 106
CST-2XXX TuffCrete® Waterborne Acrylic Concrete Stain L Int/Ext 105
CST-5XXX TuffCrete® Solvent Acrylic Concrete Stain & Waterproofing Sealer O Int/Ext 105
EC-3210 Lead Block® Lead Encapsulant L Int/Ext 109
EGF-XXX Insl-x Decorative Floor Flakes N/A Int/Ext 104
EGG-XXX GarageGuard® Waterborne Epoxy Garage Floor Coating L Int 104
FK-13XX Freezer Kote S Int 109
FLB-100 TuffCrete® Acrylic Epoxy Clear Bonding Primer/Sealer L Int/Ext 105
FM-65XX Acrylic Field Marking Paint L Ext 108
HTF-XXX Hot Trax® Epoxy Fortified Acrylic Concrete and Garage Floor Paint L Int/Ext 104
IG-40XX Epoxy Swimming Pool Paint S Ext 106
IL-6800 Seal Lock® Plus S Int 103
LFR-1100 Latex Fire Retardant Paint L Int 109
NO-4000 Odor Less O Int/Ext 103
PS-8000 Prime Lock Plus O Int/Ext 103
RP-27XX Rubber-Based Swimming Pool Paint, Satin S Ext 106
SU-0XXX Sure Step® Anti-Slip Coating L Int/Ext 104
SXA-110 Stix® Waterborne Bonding Primer L Int/Ext 109
TB-1100 Block Out® Exterior Primer L Ext 103
TP-22XX Latex Traffic Paint L Ext 107
TP-23XX Acrylic Fast-Set Traffic Paint L Ext 107
TP-24XX Alkyd Traffic Paint O Ext 107
Key: L=Latex O=Alkyd/Oil S=Other/Special Int=For Interior Use Ext=For Exterior Use N/A=Not Applicable
158 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Product Index By Brand
Code Product Name Type Use Page
Insl-x®
TP-32XX Latex Traffic Paint L Ext 107
TP-33XX Acrylic Fast-Set Traffic Paint L Ext 107
TP-34XX Alkyd Traffic Paint O Ext 107
TRC-007 Tru-flex® Concrete Bond Coat L Int/Ext 108
TRC-035 Tru-flex® Patch N Level L Int/Ext 108
TRC-038 Tru-flex® Line Marking Paint L Int/Ext 108
TRC-040 Tru-flex® Neutral Filler Coat L Int/Ext 108
TRC-060 Tru-flex® Cushion Coat L Int/Ext 108
Product Index
TRC-08X Tru-flex® Smooth Colored Finish Coats L Int/Ext 108
TRC-28x Tru-flex® Textured Colored Finished Coats L Int/Ext 108
TS-3XXX Tough Shield® Floor & Patio L Int/Ext 104
WR-10XX Waterborne Swimming Pool Paint, Semi-Gloss L Ext 106
LENMAR®
1A.02 Duralaq® Pigmented Lacquer Concentrate Gloss White S Int 128
1A.03 Duralaq® Pigmented Lacquer Concentrate Dull Rubbed White S Int 128
1A.101 Acetone NA NA 140
1A.106 N-Butyl Acetate NA NA 140
1A.114 Lacquer Retarder S Int 140
1A.13 Duralaq® Pigmented Lacquer Concentrate Semi-Gloss Black S Int 128
1A.137 Mineral Spirits NA NA 140
1A.355 Butyl Cellosolve NA NA 140
1A.406 All Purpose Thinner NA NA 140
1A.519 Lacquer Thinner NA NA 140
1A.622 Catalyst for Conversion Varnish S Int 140
1A.822 Catalyst, Precat S Int 140
1A.87 Duralaq® Pigmented Lacquer Concentrate Dull Rubbed Black S Int 128
1A.97 Duralaq® Pigmented Lacquer Concentrate Gloss Black S Int 128
1AS.1200 QuickStain® Alkyd Wiping Stain Clear Base O Int 136
1AS.12xx QuickStain® Alkyd Wiping Stain O Int 136
1B.210 Flow Additive S Int 140
1B.500 Flattening Additive NA NA 140
1C.201 Duralaq® Production Sealer S Int 127
1C.203 Duralaq® WW Nitrocellulose Sealer S Int 126
1C.204 Ultralaq® White Vinyl Sealer S Int 125
1C.2138 UltraLaq® 275 VOC Water White Vinyl Sanding Sealer S Int 131
Key: L=Latex O=Alkyd/Oil S=Other/Special Int=For Interior Use Ext=For Exterior Use N/A=Not Applicable
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 159
†For the most up-to-date MPI specifications, visit www.mpi.net
Product Index By Brand
Code Product Name Type Use Page
LENMAR®
1C.2153 DuraLaq® 275 VOC Water White Lacquer Sanding Sealer S Int 132
1C.216 Duralaq® Black Undercoater S Int 128
1C.2350 DuraLaq® 275 VOC HP Lacquer Sanding Sealer S Int 132
1C.2395 DuraLaq® 275 VOC White Undercoater S Int 131&133
1C.358 Duralaq® High Hide Premium Undercoater S Int 128
1C.360 Ultralaq® WW Vinyl Sanding Sealer S Int 122
1C.365 Duralaq® White HB Undercoater S Int 128
1C.370 Ultralaq® Precatalyzed Water White Vinyl Sanding Sealer S Int 122
1C.380 Ultralaq® Quick Dry Water White Precatalyzed Vinyl Sanding Sealer S Int 122
1C.383 Duralaq® High-Build Nitrocellulose Pro Sealer S Int 127
1C.397 Duralaq® High Solids WW Nitrocellulose Sanding Sealer S Int 126
1C.399 Duralaq® High-Viscosity N/C Production Sealer S Int 127
1C.402 Duralaq® High Hide Premium White Undercoat S Int 128
1C.421 Duralq® White Undercoater S Int 128
1C.423 Duralaq® WW High Build Sealer S Int 126
1C.475 Ultra Unilaq® CAB Acrylic Sealer S Int 125
1C.5300 MegaVar® Water White Conversion Sealer S Int 120
1C.800 Ultralaq® White Precat undercoater S Int 123
1C.900 Ultra Unilaq® CAB White Undercoater S Int 125
1D.2211 Ultralaq® 275 VOC Water White Precat Flat S Int 131
1D.2212 Ultralaq® 275 VOC Water White Precat Dull S Int 131
1D.2214 Ultralaq® 275 VOC Water White Precat Satin S Int 131
1D.2216 Ultralaq® 275 VOC Water White Precat Semi-Gloss S Int 131
1D.2219 Ultralaq® 275 VOC Water White Precat Gloss S Int 131
1D.331 Ultralaq® Water White Pre-catalyzed Lacquer Flat S Int 121
1D.332 Ultralaq® Water White Pre-catalyzed Lacquer Dull Rubbed S Int 121
1D.334 Ultralaq® Water White Pre-catalyzed Lacquer Satin S Int 121
1D.336 Ultralaq® Water White Pre-catalyzed Lacquer Semi-Gloss S Int 121
1D.339 Ultralaq® Water White Pre-catalyzed Lacquer Gloss S Int 121
1D.351 UltraMax® Plus Water White Precatalyzed Lacquer Flat S Int 121
1D.352 UltraMax® Plus Water White Precatalyzed Lacquer Dull Rubbed S Int 121
1D.354 UltraMax® Plus Water White Precatalyzed Lacquer Satin S Int 121
1D.356 UltraMax® Plus Water White Precatalyzed Lacquer Semi-Gloss S Int 121
1D.359 UltraMax® Plus Water White Precatalyzed Lacquer Gloss S Int 121
1D.451 UltraMax® 550 VOC WW Precat, Flat S Int 122
1D.452 UltraMax® 550 VOC WW Precat, Dull S Int 122
1D.454 UltraMax® 550 VOC WW Precat, Satin S Int 122
Key: L=Latex O=Alkyd/Oil S=Other/Special Int=For Interior Use Ext=For Exterior Use N/A=Not Applicable
160 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Product Index By Brand
Code Product Name Type Use Page
LENMAR®
1D.456 UltraMax® 550 Voc WW Precat, S/Gloss S Int 122
1D.459 UltraMax® 550 VOC WW Precat, Gloss S Int 122
1D.669 DuraLaq® Crackle Finish S Int 139
1E.410 Duralaq® High VIS White Undercoater S Int 128
1GZ.1000 Quickstain® Traditional Glaze Base O Int 137
1GZ.1200 QuickStain® Breakaway Glaze Base S Int 137
1H.12 Duralaq® Pigmented Lacquer Concentrate Semi-Gloss White S Int 128
1K01.99x4 Duralaq® Nitrocellulose Lacquer Satin S Int 129
Product Index
1K01.99x6 Duralaq® Nitrocellulose Lacquer Semi-Gloss S Int 129
1K01.99x9 Duralaq® Nitrocellulose Lacquer Gloss S Int 129
1K02.4774 Duralaq® Nitrocellulose Lacquer Satin S Int 129
1K02.4776 Duralaq® Nitrocellulose Lacquer Gloss S Int 129
1LL.210 Duralaq® Water White Nitrocellulose Lacquer Gloss S Int 126
1LL.211 Duralaq® Water White Nitrocellulose Lacquer Flat S Int 126
1LL.212 Duralaq® Water White Nitrocellulose Lacquer Dull Rubbed S Int 126
1LL.214 Duralaq® Water White Nitrocellulose Lacquer Satin S Int 126
1LL.216 Duralaq® Water White Nitrocellulose Lacquer Semi-Gloss S Int 126
1LL.2314 275 VOC Water White Nitrocellulose Lacquer Satin S Int 132
1LL.2316 275 VOC Water White Nitrocellulose Lacquer Gloss S Int 132
1LL.632 Duralaq® High-Solids, High-Build Production System Dull Rubbed S Int 127
1LL.634 Duralaq® High-Solids, High-Build Production System Gloss S Int 127
1LL.636 Duralaq® High-Solids, High-Build Production System Semi-Gloss S Int 127
1LL.639 Duralaq® High-Solids, High-Build Production System Gloss S Int 127
1LL.682 Duralaq® High-Solids, High Volume Pro System Dull Rubbed S Int 127
1LL.684 Duralaq® High-Solids, High Volume Pro System Satin S Int 127
1LL.686 Duralaq® High-Solids, High Volume Pro System Semi-Gloss S Int 127
1LL.689 Duralaq® High-Solids, High Volume Pro System Gloss S Int 127
1LS.1000 QuickStain® Lacquer Wiping Stain Clear Base S Int 136
1LS.12xx QuickStain® Lacquer Wiping Stain S Int 136
1M.2261 Ultralaq® 275 VOC White Precatalyzed Lacquer Flat S Int 131
1M.2264 Ultralaq® 275 VOC White Precatalyzed Lacquer Satin S Int 131
1M.2266 Ultralaq® 275 VOC White Precatalyzed Lacquer Semi-Gloss S Int 131
1M.2269 Ultralaq® 275 VOC White Precatalyzed Lacquer Gloss S Int 131
1M.2304 Duralaq® 275 VOC Pigmented White Nitrocellulose Lacquer Satin S Int 133
1M.2306 Duralaq® 275 VOC Pigmented White Nitrocellulose Lacquer Semi-Gloss S Int 133
1M.2309 Duralaq® 275 VOC Pigmented White Nitrocellulose Lacquer Gloss S Int 133
1M.2424 Duralaq® 275 VOC Production High Build Nitrocellulose Lacquer Satin S Int 132
Key: L=Latex O=Alkyd/Oil S=Other/Special Int=For Interior Use Ext=For Exterior Use N/A=Not Applicable
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 161
†For the most up-to-date MPI specifications, visit www.mpi.net
Product Index By Brand
Code Product Name Type Use Page
LENMAR®
1M.2426 Duralaq® 275 VOC Production High Build Nitrocellulose Lacquer Semi-Gloss S Int 132
1M.2429 Duralaq® 275 VOC Production High Build Nitrocellulose Lacquer Gloss S Int 132
1M.2501 Megavar® 275 VOC WW Conversion Varnish, Flat S Int
1M.2502 Megavar® 275 VOC WW Conversion Varnish, Dull S Int 130
1M.2504 Megavar® 275 VOC WW Conversion Varnish, Satin S int 130
1M.2506 Megavar® 275 VOC WW Conversion Varnish, S/Gloss S Int 130
1M.2590 Megavar® 275 VOC WW Conversion Varnish, Gloss S Int 130
1M.4301 MegaVar® Clear Water White Conversion Varnish Flat S Int 119
1M.4302 MegaVar® Clear Water White Conversion Varnish Dull Rubbed S Int 119
1M.4304 MegaVar® Clear Water White Conversion Varnish Satin S Int 119
1M.4306 MegaVar® Clear Water White Conversion Varnish Semi-Gloss S Int 119
1M.4309 MegaVar® Clear Water White Conversion Varnish Gloss S Int 119
1M.6301 MegaVar® Plus High-Solids Water White Conversion Varnish Flat S Int 119
1M.6302 MegaVar® Plus High-Solids Water White Conversion Varnish Dull Rubbed S Int 119
1M.6304 MegaVar® Plus High-Solids Water White Conversion Varnish Satin S Int 119
1M.6306 MegaVar® Plus High-Solids Water White Conversion Varnish Semi-Gloss S Int 119
1M.6309 MegaVar® Plus High-Solids Water White Conversion Varnish Gloss S Int 119
1M.802 Ultralaq® White Precatalyzed Topcoat Dull Rubbed S Int 123
1M.804 Ultralaq® White Precatalyzed Topcoat Satin S Int 123
1M.806 Ultralaq® White Precatalyzed Topcoat Semi-Gloss S Int 123
1M.808 Ultralaq® White Precatalyzed Topcoat Gloss S Int 123
1M.962 Ultra Unilaq® CAB Acrylic White Topcoat Dull Rubbed S Int 124
1M.964 Ultra Unilaq® CAB Acrylic White Topcoat Satin S Int 124
1M.966 Ultra Unilaq® CAB Acrylic White Topcoat Semi-Gloss S Int 124
1M.969 Ultra Unilaq® CAB Acrylic White Topcoat Gloss S Int 124
1M.972 Ultra Unilaq® CAB Clear Lacquer Dull Rubbed S Int 124
1M.974 Ultra Unilaq® CAB Clear Lacquer Satin S Int 124
1M.976 Ultra Unilaq® CAB Clear Lacquer Dull Semi-Gloss S Int 124
1M.979 Ultra Unilaq® CAB Clear Lacquer Dull Gloss S Int 124
1PR.100 ClearCoat Pro Series L Int 113
1PR.304 ClearCoat PRO, Satin L Int 112
1PR.305 ClearCoat PRO, Semi-Gloss L Int 112
1PR.309 ClearCoat PRO, Gloss L Int 112
1PR.504 ClearCoat PRO HT, Satin L Int 112
1PR.506 ClearCoat PRO HT, Semi-Gloss L Int 112
1PR.509 ClearCoat PRO HT, Gloss L Int 112
1PR.704 ClearCoat PRO XD, Satin L Int 113
Key: L=Latex O=Alkyd/Oil S=Other/Special Int=For Interior Use Ext=For Exterior Use N/A=Not Applicable
162 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Product Index By Brand
Code Product Name Type Use Page
LENMAR®
1PR.706 ClearCoat XD, Semi-Gloss L Int 113
1PR.709 ClearCoat XD, Gloss L Int 113
1PR.7B ClearCoat Pro XD, Cross-Linker O Int 113
1S.750 MegaVar® Conversion Undercoater S Int 123
1S.752 MegaVar® White Conversion Varnish Dull Rubbed S Int 123
1S.754 MegaVar® White Conversion Varnish Satin S Int 123
1S.756 MegaVar® White Conversion Varnish Semi-Gloss S Int 123
1S.758 MegaVar® White Conversion Varnish Gloss S Int 123
Product Index
1T.992 Moisture Cure Urethane Gloss S Int 117
1U.1000 QuickStain® Alkyd Wiping Stain Neutral Base O Int 136
1U.1053 QuickStain® Gilsonite Base S Int 139
1U.60X QuickStain® Dye Concentrate S Int 138
1U.6xx Quickstain® Dye Stains S Int
1V.109 Spar Varnish O Int/Ext 111
1W.482 Duralaq® Booth Coater, Clear S Int 139
1W.483 Duralaq® Booth Coater, White S Int 139
1WB.100 Duralaq-WB® Waterborne Acrylic Sealer Clear L Int 134
1WB.102 Duralaq-WB® Waterborne Acrylic Clear Dull Rubbed Finish Clear L Int 134
1WB.104 Duralaq-WB® Waterborne Acrylic Clear Satin Finish Clear L Int 134
1WB.106 Duralaq-WB® Waterborne Acrylic Clear Semi-Gloss Finish Clear L Int 134
1WB.109 Duralaq-WB® Waterborne Acrylic Clear Gloss Finish Clear L Int 134
1WB.1100 QuickStain® Waterborne Wiping Stain Clear Base L Int 136
1WB.1300 Waterborne Interior Wiping Wood Stain L Int 111
1WB.1400 Waterborne Aqua-Plastic® Urethane Gloss L Int 111
1WB.1410 Waterborne Aqua-Plastic® Urethane Semi-Gloss L Int 111
1WB.1420 Waterborne Aqua-Plastic® Urethane Gloss Dull L Int 111
1WB.1427 Waterborne Aqua-Plastic® Urethane Gloss Satin L Int 111
1WB.200 Duralaq-WB® Waterborne White Acrylic Sealer L Int 135
1WB.202 Duralaq-WB® Waterborne White Acrylic Dull Rubbed Finish L Int 135
1WB.204 Duralaq-WB® Waterborne White Acrylic Satin Finish L Int 135
1WB.206 Duralaq-WB® Waterborne White Acrylic Semi-Gloss Finish L Int 135
1WB.209 Duralaq-WB® Waterborne White Acrylic Gloss Finish L Int 135
1WB.502 MegaVar® WB Polyurethane Polymer Dull Rubbed Finish S Int 134
1WB.504 MegaVar® WB Polyurethane Polymer Satin Finish S Int 134
1WB.506 MegaVar® WB Polyurethane Polymer Semi-Gloss Finish S Int 134
1WB.509 MegaVar® WB Polyurethane Polymer Gloss Finish S Int 134
1Y.354 Polyurethane Wood Floor Satin Finish (350 VOC) O Int 115
Key: L=Latex O=Alkyd/Oil S=Other/Special Int=For Interior Use Ext=For Exterior Use N/A=Not Applicable
Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 163
†For the most up-to-date MPI specifications, visit www.mpi.net
Product Index By Brand
Code Product Name Type Use Page
LENMAR®
1Y.356 Polyurethane Wood Floor Semi-Gloss Finish (350 VOC) O Int 115
1Y.359 Polyurethane Wood Floor Gloss Finish (350 VOC) S Int 115
1Y.519 Rapid Seal Dual Purpose Sealer S Int 116
1Y.555 Polyurethane Wood Floor Gloss Finish O Int 115
1Y.617 Polyurethane Wood Floor Satin Finish O Int 115
1Y.724 Polyurethane Wood Floor Semi-Gloss Finish O Int 115
1Y.809 CourtTime Gym Floor Gloss Finish O Int 116
1Y.915 Polyurethane Wood Floor Dull Rubbed Finish O Int 115
1YB.100 ECH20® Sealer S Int 114
1YB.311 Degreaser Floor Cleaner NA NA 118
1YB.321 Floor Cleaner NA NA 118
Key: L=Latex O=Alkyd/Oil S=Other/Special Int=For Interior Use Ext=For Exterior Use N/A=Not Applicable
164 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net
Benjamin Moore & Co.
101 Paragon Drive, Montvale, NJ 07645
For more information, visit us at http://www.benjaminmoore.com
©2013, 2017 Benjamin Moore & Co. Advance, Arborcoat, Aura, ben, Benjamin Moore, Benwood, Century, Color Lock,
Color Preview, the Crown Device, Eco Spec, Fresh Start, Gennex, Grand Entrance, Green Promise, Impervex, Impervo,
Molten Metallics, Moore’s, MoorGard, MoorGlo, MoorLife, MoorWhite, Muresco, Natura, Notable, Profinish, Regal, Revive,
Scuff-X, Stays Clear, Studio Finishes, Super Spec, Super Spec HP, Sure Seal, the triangle “M” symbol, and Ultra Spec
are registered trademarks licensed to Benjamin Moore & Co.
All other marks are the property of their respective owner. Printed in the USA. 1/18 HRP
M2451803