This document outlines essential water quality parameters for plantation and gardening, including pH levels between 7.2-8.4, TDS between 2000-3000 PPM, chlorides less than 1000 PPM, and salinity less than 450 PPM. It also provides the water quality measurements of RO reject water, which has a pH of 8.1, TDS of 1442 PPM, chlorides of 148 PPM, and salinity of 266 PPM. The document notes that conductivity below 4000 declares suitable water in terms of salinity, and conductivity above 4800 uS/cm is considered saline water, according to NEQS limits for irrigation water in Pakistan.
This document outlines essential water quality parameters for plantation and gardening, including pH levels between 7.2-8.4, TDS between 2000-3000 PPM, chlorides less than 1000 PPM, and salinity less than 450 PPM. It also provides the water quality measurements of RO reject water, which has a pH of 8.1, TDS of 1442 PPM, chlorides of 148 PPM, and salinity of 266 PPM. The document notes that conductivity below 4000 declares suitable water in terms of salinity, and conductivity above 4800 uS/cm is considered saline water, according to NEQS limits for irrigation water in Pakistan.
This document outlines essential water quality parameters for plantation and gardening, including pH levels between 7.2-8.4, TDS between 2000-3000 PPM, chlorides less than 1000 PPM, and salinity less than 450 PPM. It also provides the water quality measurements of RO reject water, which has a pH of 8.1, TDS of 1442 PPM, chlorides of 148 PPM, and salinity of 266 PPM. The document notes that conductivity below 4000 declares suitable water in terms of salinity, and conductivity above 4800 uS/cm is considered saline water, according to NEQS limits for irrigation water in Pakistan.