Professional Documents
Culture Documents
Flowserve HSO Ps-30-8-E
Flowserve HSO Ps-30-8-E
Experience In Motion
Pump Supplier to the World
Flowserve is the driving force in the global industrial Product Brands of Distinction
pump marketplace. No other pump company in the
world has the depth or breadth of expertise in the ACEC™ Centrifugal Pumps
successful application of pre-engineered, engineered Aldrich™ Pumps
and special purpose pumps and systems.
Byron Jackson ® Pumps
HSO/HDO
General and Special
Purpose Barrel Pumps for
the Oil and Gas Industry
ISO 13709/API 610 (BB5)
HDO
Sag Boring Prolongs Wear Ring Life Forged Barrel Casing, Suction
Sag boring is applied to all volutes nine stages and higher. and Discharge Heads
The bottom volute casing is bored in incremental steps The barrel casing and discharge head houses the pump
towards the center. This design accommodates the static cartridge and is a split pressure level design. A full dis-
deflection of the rotating assembly caused by the weight charge pressure rated barrel design is also available.
of the shaft and impellers when the pump is not operating.
During start-up the shaft will straighten and casing rings Forged pressure containment parts are provided in the
will slide upwards to maintain clearances. This process following materials:
eliminates rubbing of wear rings commonly found with • Carbon steel overlaid with stainless steel at all critical
slender shaft and high numbers of stages. metal-to-metal seating fits and high-velocity areas
• Stainless steels
Robust Bearing System • Duplex and super duplex stainless steels
• Carbon steel overlaid with Inconel ® on all wetted areas
Sleeve journal radial bearings and tilting pad thrust bear-
ings are standard, utilizing either air, fan or water cooling Alternative materials are available to suit individual
as needed. Duplex ball thrust bearings are available where service requirements.
appropriate and permitted by ISO 13709/API 610 (BB5).
The bolted discharge head features only one high-
pressure, fully confined, circular compression gasketed
sealing joint to the atmosphere for superior reliability.
An optional bolted suction head also is available.
6
flowserve.com
Global Service
and Technical
Support
Energy
Latin America
Flowserve Corporation
Martín Rodriguez 4460
B1644CGN-Victoria-San Fernando
Buenos Aires, Argentina
Telephone: +54 11 4006 8700
Telefax: +54 11 4714 1610
Asia Pacific
Flowserve Pte. Ltd.
10 Tuas Loop
Singapore 637345
Telephone: +65 6771 0600
Telefax: +65 6779 4607
XX-XX-XX† (E)
Bulletin PS-30-8a (E) Printed
Printed in
in USA.
USA. October
September
2007.
2010.
© Flowserve
© Flowserve
Corporation
Corporation
flowserve.com