Professional Documents
Culture Documents
Modules / Lectures: 1. Combing
Modules / Lectures: 1. Combing
Modules / Lectures
(https://www
Combing
(https://twitt
Introduction to Combing ()
(https://www
Factors affecting combing ()
(https://www
Preparation for combing () india-085866
(https://plus.
Combing Operation ()
Sliver formation ()
Automation in Combing ()
Roving
Yarn Doubling
1. Combing
1.8 Process Control in Combing :
Process Control
In combers, the important aspects to be controlled are waste level, combing efficiency and sliver irregularity. Mills generally fix the
amount of comber waste to be extracted only by past experience and not on the fiber length distribution of the cottons processed
which primarily determines the amount of waste to be removed to achieve the desired fiber length uniformity.
Best results of combing of Indian cottons are generally achieved by suitable adjustments of detaching distance, even though the top
comb penetration is not very deep. However, the cottons have a high fiber length uniformity but the lap contains too many impurities
and neps, a deep penetration of top comb is desirable, without fiber rupture., combing efficiency and sliver irregularity. Mills generally
fix the amount of comber waste to be extracted only by past experience and not on the fiber length distribution of the cottons
processed which primarily determines the amount of waste to be removed to achieve the desired fiber length uniformity.
Mill process all classes of cottons in the same comber without regard to the suitability of the needling arrangement. Coarsening of
the needling scheme helps to reduce the comber waste by 2% for coarser cottons and by 1% for finer cottons. Incase of heavier laps,
it increases the comber waste by 2 to 3% as compared with lighter laps.
Important: Please enable javascript in your browser and download Adobe Flash player
Site Maintained by Web Studio, IIT Madras. Contact Webmaster: nptel@iitm.ac.in (mailto:nptel@iitm.ac.in )