This document provides a test protocol and report for a laboratory hot air oven called "VENTICELL". It summarizes 5 tests performed on the oven including: [1] temperature stability at 120°C with a tolerance of ±1°C, [2] temperature stable time of 20 minutes, [3] time-delayed program start was not applicable, [4] number of cycles was not applicable, and [5] printing interval was not applicable. The tests were marked as passing.
To Determine The Coefficient of Performance of Heat Pump and Production of Heat Pump Performance Curves Over A Range of Source and Delivery Temperatures
This document provides a test protocol and report for a laboratory hot air oven called "VENTICELL". It summarizes 5 tests performed on the oven including: [1] temperature stability at 120°C with a tolerance of ±1°C, [2] temperature stable time of 20 minutes, [3] time-delayed program start was not applicable, [4] number of cycles was not applicable, and [5] printing interval was not applicable. The tests were marked as passing.
This document provides a test protocol and report for a laboratory hot air oven called "VENTICELL". It summarizes 5 tests performed on the oven including: [1] temperature stability at 120°C with a tolerance of ±1°C, [2] temperature stable time of 20 minutes, [3] time-delayed program start was not applicable, [4] number of cycles was not applicable, and [5] printing interval was not applicable. The tests were marked as passing.
This document provides a test protocol and report for a laboratory hot air oven called "VENTICELL". It summarizes 5 tests performed on the oven including: [1] temperature stability at 120°C with a tolerance of ±1°C, [2] temperature stable time of 20 minutes, [3] time-delayed program start was not applicable, [4] number of cycles was not applicable, and [5] printing interval was not applicable. The tests were marked as passing.
$led#nter Protocol and Report Ventice!!-707,20L7 Fitlrintrtpnfqn Umi$l "VENT!CELL" Laboratory Hot Air Oven
Stopping the program P1
Depress ON/OFF again
TEST PROTOCOL.l
VENTICELL
SI.No. Tested Set Disp. Mea. Deviation Comm.
Value Value Vatue L Temperature (Set By User) r20 IZC, t\q.7 O,3 cb< 2 Temperature stable time (20min) 2gtnnin 00,2o 26la\a CIo 0 v<- 3 Time-delayed program start n{ tA nJrA ,JIA NTA ^jfA 4 Number of cycles JiF nilf\ ,{4} N(ft i'{ tft 5 Printing lnterval Nfff d/n Nifr N/^ r../'f+
Note: Tolerance is + 1"C of the set temperature.
pass{ Fair f N/A []
Narvtr Derr 5leruarunt
/ \---: Execurso ev l'f-,;hn Ki-r,"lpt lo tb,7 tu,l) Ir-- VeRrrreo gv ahibagc- Bf t0 1 o71 ul7 %.
To Determine The Coefficient of Performance of Heat Pump and Production of Heat Pump Performance Curves Over A Range of Source and Delivery Temperatures