Professional Documents
Culture Documents
Open CD M Report
Open CD M Report
Open CD M Report
Project
First Saved Sunday, June 19, 2016
Last Saved Tuesday, May 15, 2018
Product Version 17.1 Release
Save Project Before Solution No
Save Project After Solution No
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 2 of 42
Contents
l Units
l Model (C2)
¡ Geometry
n SolidModel.1
¡ Construction Geometry
n Paths
¡ Coordinate Systems
¡ Connections
n Contacts
¡ Mesh
¡ Imported Plies
n ACP (Pre)
n SolidModel.1.h5(ACP (Pre))
n All layers(ACP (Pre))
n HDPE inner(ACP (Pre))
n P1__+55(ACP (Pre))
n P1L1__HDPE inner(ACP (Pre))
n +55(ACP (Pre))
n P1__55(ACP (Pre))
n First layer
n -55(ACP (Pre))
n P1__-55(ACP (Pre))
n Second Layer
n +55(ACP (Pre))
n P1__+55(ACP (Pre))
n Third Layer
n -55(ACP (Pre))
n P1__-55(ACP (Pre))
n Fourth Layere
n HDPE outer(ACP (Pre))
n P1__HDPE outer(ACP (Pre))
n P1L1__HDPE outer(ACP (Pre))
¡ Named Selections
¡ Static Structural (C3)
n Analysis Settings
n Loads
n Solution (C4)
n Solution Information
n Total Deformation
n Total Deformation
n Equivalent Elastic Strain
n Equivalent Elastic Strain
n Damage Status
n Results
n Normal Stress
n Results
n Energy Dissipated Per Unit Volume
n Results
n Fiber Tensile Damage Variable
n Results
n Directional Deformation
n Directional Deformation
n Matrix Tensile Damage Variable
n Results
n Matrix Compressive Damage Variable
n Results
n Fiber Compressive Damage Variable
n Results
n Shear Damage Variable
n Results
l Material Data
¡ HDPE_int
¡ Epoxy-EGlass_Wet
Units
TABLE 1
Unit System Metric (mm, kg, N, s, mV, mA) Degrees rad/s Celsius
Angle Degrees
Rotational Velocity rad/s
Temperature Celsius
Model (C2)
Geometry
TABLE 2
Model (C2) > Geometry
Object Name Geometry
State Fully Defined
Definition
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 3 of 42
TABLE 3
Model (C2) > Geometry > Parts
Object Name SolidModel.1
State Meshed
Graphics Properties
Visible Yes
Transparency 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature By Environment
Behavior None
Material
Assignment Composite Material
Nonlinear Effects Yes
Thermal Strain Effects Yes
Bounding Box
Length X 69.811 mm
Length Y 69.542 mm
Length Z 254. mm
Properties
Volume 3.4959e+005 mm³
Centroid X 2.748e-004 mm
Centroid Y -1.1067e-005 mm
Centroid Z 127. mm
Statistics
Nodes 12376
Elements 10404
Mesh Metric Orthogonal Quality
Min 0.162750697730572
Max 0.77067600132544
Average 0.350398908257672
Standard Deviation 0.259239091772053
Transfer Properties
Source B5::ACP (Pre)
TABLE 4
Model (C2) > Construction Geometry
Object Name Construction Geometry
State Fully Defined
Display
Show Mesh No
TABLE 5
Model (C2) > Construction Geometry > Paths
Object Name Path Path 2
State Fully Defined
Definition
Path Type Two Points
Path Coordinate System Global Coordinate System
Number of Sampling Points 50. 47.
Suppressed No
Start
Coordinate System Global Coordinate System
Start X Coordinate 25.4 mm 0. mm
Start Y Coordinate 0. mm 25.4 mm
Start Z Coordinate 127. mm 0. mm
Location Defined
End
Coordinate System Global Coordinate System
End X Coordinate 32.385 mm 0. mm
End Y Coordinate 0. mm 25.4 mm
End Z Coordinate 127. mm 250. mm
Location Defined
Coordinate Systems
TABLE 6
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 4 of 42
Connections
TABLE 7
Model (C2) > Connections
Object Name Connections
State Fully Defined
Auto Detection
Generate Automatic Connection On Refresh Yes
Transparency
Enabled Yes
TABLE 8
Model (C2) > Connections > Contacts
Object Name Contacts
State Fully Defined
Definition
Connection Type Contact
Scope
Scoping Method Geometry Selection
Geometry All Bodies
Auto Detection
Tolerance Type Slider
Tolerance Slider 0.
Tolerance Value 0.68112 mm
Use Range No
Face/Face Yes
Cylindrical Faces Include
Face/Edge No
Edge/Edge No
Priority Include All
Group By Bodies
Search Across Assemblies
Statistics
Connections 0
Active Connections 0
Mesh
TABLE 9
Model (C2) > Mesh
Object Name Mesh
State Solved
Display
Display Style Body Color
Statistics
Nodes 12376
Elements 10404
Mesh Metric Orthogonal Quality
Min 0.16275
Max 0.77068
Average 0.3504
Standard Deviation 0.25924
Model Assembly
Read Only Yes
TABLE 10
Model (C2) > Imported Plies
Object Name Imported Plies
State Solved
Definition
Type Imported Plies
Suppressed No
Material
Nonlinear Effects Yes
Thermal Strain Effects Yes
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 5 of 42
ACP (Pre)
SolidModel.1.h5(ACP (Pre))
P1__+55(ACP (Pre))
TABLE 11
Model (C2) > Imported Plies > ACP (Pre) > SolidModel.1.h5(ACP (Pre)) > All layers(ACP (Pre)) > HDPE inner(ACP (Pre)) > P1__+55(ACP (Pre)) > P1L1__HDPE inner(ACP
(Pre))
Object Name P1L1__HDPE inner(ACP (Pre))
State No State
Definition
Name in Source P1L1__HDPE inner
ID in Source P1L1__HDPE inner
Material HDPE_int
Thickness 2.49 mm
Angle 0. °
Number of Elements 1734.
Transfer Properties
Source B5::ACP (Pre)
+55(ACP (Pre))
P1__55(ACP (Pre))
TABLE 12
Model (C2) > Imported Plies > ACP (Pre) > SolidModel.1.h5(ACP (Pre)) > All layers(ACP (Pre)) > +55(ACP (Pre)) > P1__55(ACP (Pre)) > First layer
Object Name First layer
State No State
Definition
Name in Source P1L1__+55
ID in Source P1L1__+55
Material Epoxy-EGlass_Wet
Thickness 0.50165 mm
Angle 55. °
Number of Elements 1734.
Transfer Properties
Source B5::ACP (Pre)
-55(ACP (Pre))
P1__-55(ACP (Pre))
TABLE 13
Model (C2) > Imported Plies > ACP (Pre) > SolidModel.1.h5(ACP (Pre)) > All layers(ACP (Pre)) > -55(ACP (Pre)) > P1__-55(ACP (Pre)) > Second Layer
Object Name Second Layer
State No State
Definition
Name in Source P1L1__-55
ID in Source P1L1__-55
Material Epoxy-EGlass_Wet
Thickness 0.50165 mm
Angle -55. °
Number of Elements 1734.
Transfer Properties
Source B5::ACP (Pre)
+55(ACP (Pre))
P1__+55(ACP (Pre))
TABLE 14
Model (C2) > Imported Plies > ACP (Pre) > SolidModel.1.h5(ACP (Pre)) > All layers(ACP (Pre)) > +55(ACP (Pre)) > P1__+55(ACP (Pre)) > Third Layer
Object Name Third Layer
State No State
Definition
Name in Source P1L1__+55
ID in Source P1L1__+55.2
Material Epoxy-EGlass_Wet
Thickness 0.50165 mm
Angle 55. °
Number of Elements 1734.
Transfer Properties
Source B5::ACP (Pre)
-55(ACP (Pre))
P1__-55(ACP (Pre))
TABLE 15
Model (C2) > Imported Plies > ACP (Pre) > SolidModel.1.h5(ACP (Pre)) > All layers(ACP (Pre)) > -55(ACP (Pre)) > P1__-55(ACP (Pre)) > Fourth Layere
Object Name Fourth Layere
State No State
Definition
Name in Source P1L1__-55
ID in Source P1L1__-55.2
Material Epoxy-EGlass_Wet
Thickness 0.50165 mm
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 6 of 42
Angle -55. °
Number of Elements 1734.
Transfer Properties
Source B5::ACP (Pre)
Named Selections
TABLE 17
Model (C2) > Named Selections > Named Selections
Object SOLIDMODEL.1_ALL_ELEMENTS_BOT SOLIDMODEL.1_ALL_ELEMENTS_TOP SOLIDMODEL.1_EDGESET.1_WALL SOLIDMODEL.1_SOL_EPOXY_BOT SOLIDMODEL.1_SOL_E
Name (ACP (Pre)) (ACP (Pre)) (ACP (Pre)) (ACP (Pre))
State Fully Defined
Scope
Scoping
Geometry Selection
Method
Geometry 1 Face
Definition
Send to
Yes
Solver
Visible Yes
Program
Controlled Exclude
Inflation
Statistics
Type Imported
Total
1 Face
Selection
Surface
44446 mm² 55628 mm² 1376.3 mm² 44446 mm²
Area
Suppressed 0
Used by
Mesh No
Worksheet
Transfer Properties
Source B5::ACP (Pre)
Tolerance
Tolerance
Type
Zero
Tolerance
Relative
Tolerance
TABLE 19
Model (C2) > Static Structural (C3) > Analysis Settings
Object Name Analysis Settings
State Fully Defined
Restart Analysis
Restart Type Program Controlled
Load Step 1
Substep 18
Time 0.66044 s
Step Controls
Number Of Steps 1.
Current Step Number 1.
Step End Time 1. s
Auto Time Stepping Program Controlled
Solver Controls
Solver Type Program Controlled
Weak Springs Program Controlled
Solver Pivot Checking Program Controlled
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 7 of 42
TABLE 20
Model (C2) > Static Structural (C3) > Loads
Object Name Pressure Displacement Displacement 2 Displacement 3
State Fully Defined
Scope
Scoping Method Geometry Selection
Geometry 1 Face
Definition
Type Pressure Displacement
Define By Normal To Components
Applied By Surface Effect
Magnitude Tabular Data
Suppressed No
Coordinate System Global Coordinate System cylindrical
X Component Free 0. mm (ramped)
Y Component Free 0. mm (ramped) Free
Z Component 0. mm (ramped) Free
Tabular Data
Independent Variable Time
FIGURE 1
Model (C2) > Static Structural (C3) > Pressure
TABLE 21
Model (C2) > Static Structural (C3) > Pressure
Steps Time [s] Pressure [MPa]
0. 0.
1
1. 20.
FIGURE 2
Model (C2) > Static Structural (C3) > Displacement
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 8 of 42
FIGURE 3
Model (C2) > Static Structural (C3) > Displacement 2
FIGURE 4
Model (C2) > Static Structural (C3) > Displacement 3
Solution (C4)
TABLE 22
Model (C2) > Static Structural (C3) > Solution
Object Name Solution (C4)
State Solve Failed
Adaptive Mesh Refinement
Max Refinement Loops 1.
Refinement Depth 2.
Information
Status Solve Required, Restart Available
MAPDL Elapsed Time 28 m 23 s
MAPDL Memory Used 160. MB
MAPDL Result File Size 437.63 MB
Post Processing
Calculate Beam Section Results No
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 9 of 42
TABLE 23
Model (C2) > Static Structural (C3) > Solution (C4) > Solution Information
Object Name Solution Information
State Solve Failed
Solution Information
Solution Output Time Increment
Newton-Raphson Residuals 0
Identify Element Violations 0
Update Interval 2.5 s
Display Points All
FE Connection Visibility
Activate Visibility Yes
Display All FE Connectors
Draw Connections Attached To All Nodes
Line Color Connection Type
Visible on Results No
Line Thickness Single
Display Type Lines
FIGURE 5
Model (C2) > Static Structural (C3) > Solution (C4) > Solution Information
Total Deformation
TABLE 24
Model (C2) > Static Structural (C3) > Solution (C4) > Total Deformation > Results
Object Name Total Deformation
State Solved
Scope
Scoping Method Geometry Selection
Geometry All Bodies
Definition
Type Total Deformation
By Time
Display Time 0.61617 s
Calculate Time History Yes
Identifier
Suppressed No
Results
Minimum 0.24434 mm
Maximum 0.94623 mm
Minimum Occurs On SolidModel.1
Maximum Occurs On SolidModel.1
Minimum Value Over Time
Minimum 6.3275e-002 mm
Maximum 0.26195 mm
Maximum Value Over Time
Minimum 0.3068 mm
Maximum 41.645 mm
Information
Time 0.61617 s
Load Step 1
Substep 5
Iteration Number 18
FIGURE 6
Model (C2) > Static Structural (C3) > Solution (C4) > Total Deformation > Total Deformation
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 10 of 42
TABLE 25
Model (C2) > Static Structural (C3) > Solution (C4) > Total Deformation > Total Deformation
Time [s] Minimum [mm] Maximum [mm]
0.2 7.9303e-002 0.3068
0.4 0.15861 0.6136
0.55 0.21808 0.84369
0.58375 0.23147 0.89548
0.6175 0.24487 0.94831
0.62889 0.24936 0.96512
0.63402 0.25141 0.97425
0.63914 0.2534 0.98039
0.6426 0.2548 0.98779
0.64606 0.25617 0.99287
0.6484 0.25711 0.99736
0.65073 0.25802 1.0001
0.65231 0.25868 1.0044
0.65389 0.25923 1.0043
0.65625 0.26024 1.0105
0.65785 0.26088 1.0132
0.65944 0.26157 1.0183
0.66044 0.26195 1.0187
1. 6.3275e-002 41.645
FIGURE 7
Model (C2) > Static Structural (C3) > Solution (C4) > Equivalent Elastic Strain > Equivalent Elastic Strain
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 11 of 42
TABLE 27
Model (C2) > Static Structural (C3) > Solution (C4) > Equivalent Elastic Strain > Equivalent Elastic Strain
Time [s] Minimum [mm/mm] Maximum [mm/mm]
0.2 6.2115e-004 3.9526e-003
0.4 1.2423e-003 7.9051e-003
0.55 1.7082e-003 1.087e-002
0.58375 1.813e-003 1.1537e-002
0.6175 1.9178e-003 1.224e-002
0.62889 1.9529e-003 1.2455e-002
0.63402 1.9682e-003 1.2611e-002
0.63914 1.9772e-003 1.2643e-002
0.6426 2.0023e-003 1.2824e-002
0.64606 2.0071e-003 1.2884e-002
0.6484 2.015e-003 1.2976e-002
0.65073 2.0201e-003 1.2996e-002
0.65231 2.0246e-003 1.3106e-002
0.65389 2.0325e-003 1.3068e-002
0.65625 2.0377e-003 1.32e-002
0.65785 2.0441e-003 1.3255e-002
0.65944 2.0431e-003 1.3387e-002
0.66044 2.0497e-003 1.3379e-002
1. 2.0533e-003 3.8727
Damage Status
TABLE 28
Model (C2) > Static Structural (C3) > Solution (C4) > Damage Status > Results
Object Name Damage Status Damage Status 2 Damage Status 3 Damage Status 4 Damage Status 6
State Solved Solve Failed Solved Solve Failed
Scope
Scoping Method Geometry Selection Geometry Selection Geometry Selection Geometry Selection Named Selection
Geometry All Bodies All Bodies All Bodies All Bodies
Sub Scope By Ply Ply Ply Ply
Ply First layer Second Layer Third Layer Fourth Layere First layer
Position Bottom Bottom Bottom Bottom
Named Selection MEDIUM DISK
Definition
Type Damage Status Damage Status Damage Status Damage Status
By Time Time Time Time
Display Time 0.4 s 0.70164 s 0.63541 s 0.76122 s
Calculate Time History Yes Yes Yes Yes
Identifier
Suppressed No No No No
Integration Point Results
Display Option Averaged Averaged Averaged Averaged
Results
Minimum 0. 0. 0. 0.
Maximum 0. 1. 1. 1. 0.
Minimum Occurs On SolidModel.1 SolidModel.1 SolidModel.1 SolidModel.1
Maximum Occurs On SolidModel.1 SolidModel.1 SolidModel.1 SolidModel.1
Minimum Value Over Time
Minimum 0. 0. 0. 0.
Maximum 0. 0. 0. 0.
Maximum Value Over Time
Minimum 0. 0. 0. 0.
Maximum 1. 1. 1. 1. 0.
Information
Time 0.4 s 0.70164 s 0.63541 s 0.76122 s
Load Step 1 1 1 1
Substep 2 999999 7 999999
Iteration Number 3 68 33 68
FIGURE 8
Model (C2) > Static Structural (C3) > Solution (C4) > Damage Status > Damage Status
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 12 of 42
TABLE 29
Model (C2) > Static Structural (C3) > Solution (C4) > Damage Status > Damage Status
Time [s] Minimum Maximum
0.2
0.4 0.
0.55
0.58375 0.5
0.6175
0.62889
0.63402
0.63914
0.6426
0.64606 0.
0.6484
0.65073 1.
0.65231
0.65389
0.65625
0.65785
0.65944
0.66044
1.
FIGURE 9
Model (C2) > Static Structural (C3) > Solution (C4) > Damage Status > Damage Status 2
TABLE 30
Model (C2) > Static Structural (C3) > Solution (C4) > Damage Status > Damage Status 2
Time [s] Minimum Maximum
0.2
0.4
0.55
0.
0.58375
0.6175
0.62889
0.63402
0.63914
0.6426
0.64606 0.
0.6484
0.65073
0.65231 1.
0.65389
0.65625
0.65785
0.65944
0.66044
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 13 of 42
1.
FIGURE 10
Model (C2) > Static Structural (C3) > Solution (C4) > Damage Status > Damage Status 3
TABLE 31
Model (C2) > Static Structural (C3) > Solution (C4) > Damage Status > Damage Status 3
Time [s] Minimum Maximum
0.2
0.4
0.55
0.
0.58375
0.6175
0.62889
0.63402
0.63914
0.6426
0.64606 0.
0.6484
0.65073
0.65231 1.
0.65389
0.65625
0.65785
0.65944
0.66044
1.
FIGURE 11
Model (C2) > Static Structural (C3) > Solution (C4) > Damage Status > Damage Status 4
TABLE 32
Model (C2) > Static Structural (C3) > Solution (C4) > Damage Status > Damage Status 4
Time [s] Minimum Maximum
0.2
0.4
0.
0.55
0.58375
0.6175
0.5
0.62889
0.63402
0.63914 0.
0.6426
0.64606
0.6484 1.
0.65073
0.65231
0.65389
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 14 of 42
0.65625
0.65785
0.65944
0.66044
1.
FIGURE 12
Model (C2) > Static Structural (C3) > Solution (C4) > Damage Status > Damage Status 6
TABLE 33
Model (C2) > Static Structural (C3) > Solution (C4) > Damage Status > Damage Status 6
Time [s] Minimum Maximum
0.2
0.4
0.55
0.58375
0.6175
0.62889
0.63402
0.63914
0.6426
0.64606 0. 0.
0.6484
0.65073
0.65231
0.65389
0.65625
0.65785
0.65944
0.66044
1.
Normal Stress
TABLE 34
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Results
Object Name Hoop 1 Hoop 2 Hoop 3 Hoop 4 Axial Axial 2 Axial 3 Axial 4 Axial Inner Axial outer Hoop outer
State Solved Solve Failed
Scope
Scoping Method Geometry Selection Geometry Selection
Geometry All Bodies All Bodies
Sub Scope By Ply Ply
Second Third Fourth Second Third Fourth P1L1__HDPE inner(ACP P1L1__HDPE outer(ACP
Ply First layer First layer
Layer Layer Layere Layer Layer Layere (Pre)) (Pre))
Position Top/Bottom Top/Bottom
Definition
Type Normal Stress Normal Stress
Orientation Y Axis Y Axis Z Axis Y Axis
By Time Time
Display Time 0.6175 s 0.65944 s 0.4 s 0.83822 s Last
Coordinate System cylindrical cylindrical
Calculate Time
Yes Yes
History
Identifier
Suppressed No No
Integration Point Results
Display Option Averaged Averaged
Average Across
No No
Bodies
Results
2.4761 7.5764 -2032.4 -443.03 -914.19 -1872. -2833.5 -732.96
Minimum 6.3766 MPa -140.49 MPa -1274. MPa
MPa MPa MPa MPa MPa MPa MPa MPa
165.12 105.22 1338.7 2127.1
Maximum 174.32 MPa 1135.7 MPa 351.1 MPa 672.05 MPa 164.99 MPa 3273.5 MPa 1045.5 MPa
MPa MPa MPa MPa
Minimum Occurs
SolidModel.1 SolidModel.1
On
Maximum Occurs
SolidModel.1 SolidModel.1
On
Minimum Value Over Time
-537.18 -661.96 -1409.2 -2032.4 -443.03 -914.19 -1872. -2833.5 -732.96
Minimum -140.49 MPa -1274. MPa
MPa MPa MPa MPa MPa MPa MPa MPa MPa
Maximum 2.7402 6.5821 MPa 12.694 15.972 MPa -5.2453 -1.6783 5.3495 8.1349 -5.3528 MPa -0.54694 1.7806 MPa
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 15 of 42
FIGURE 13
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Hoop 1
TABLE 35
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Hoop 1
Time [s] Minimum [MPa] Maximum [MPa]
0.2 0.80293 53.422
0.4 1.6059 106.84
0.55 2.2081 146.91
0.58375 2.3368 155.93
0.6175 2.4761 165.12
0.62889 2.4937 168.11
0.63402 2.574 169.85
0.63914 2.0907 170.68
0.6426 2.358 171.96
0.64606 2.5541 172.24
0.6484 2.5672 172.65
0.65073 2.6242 172.63
0.65231 2.6632 173.06
0.65389 2.5567 172.46
0.65625 2.6643 173.49
0.65785 2.641 174.
0.65944 2.6931 174.96
0.66044 2.7402 174.93
1. -537.18 673.29
FIGURE 14
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Hoop 2
TABLE 36
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Hoop 2
Time [s] Minimum [MPa] Maximum [MPa]
0.2 1.924 53.034
0.4 3.8479 106.07
0.55 5.2909 145.84
0.58375 5.6202 154.8
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 16 of 42
FIGURE 15
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Hoop 3
TABLE 37
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Hoop 3
Time [s] Minimum [MPa] Maximum [MPa]
0.2 3.7882 52.608
0.4 7.5764 105.22
0.55 10.418 144.67
0.58375 11.058 153.55
0.6175 11.76 162.71
0.62889 11.956 165.61
0.63402 12.063 167.35
0.63914 11.785 168.03
0.6426 12.044 169.45
0.64606 12.305 169.78
0.6484 12.349 170.39
0.65073 12.452 170.45
0.65231 12.52 171.19
0.65389 12.447 170.84
0.65625 172.21
12.567
0.65785 172.89
0.65944 12.585 174.25
0.66044 12.694 173.96
1. -1409.2 906.54
FIGURE 16
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Hoop 4
TABLE 38
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Hoop 4
Time [s] Minimum [MPa] Maximum [MPa]
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 17 of 42
FIGURE 17
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Axial
TABLE 39
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Axial
Time [s] Minimum [MPa] Maximum [MPa]
0.2 -5.2453 3.8772
0.4 -10.491 7.7544
0.55 -14.425 10.662
0.58375 -15.404 11.316
0.6175 -16.466 11.987
0.62889 -16.683 12.216
0.63402 -16.596 12.381
0.63914 -16.463 12.483
0.6426 -16.452 12.678
0.64606 -16.453 12.684
0.6484 -16.486 12.805
0.65073 -16.552 12.822
0.65231 -16.559 12.995
0.65389 -16.67 13.009
0.65625 -16.648 13.252
0.65785 -16.68 13.414
0.65944 -16.683 13.661
0.66044 -16.658 13.626
1. -443.03 351.1
FIGURE 18
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Axial 2
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 18 of 42
TABLE 40
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Axial 2
Time [s] Minimum [MPa] Maximum [MPa]
0.2 -1.6783 3.948
0.4 -3.3567 7.8961
0.55 -4.6155 10.857
0.58375 -4.8981 11.523
0.6175 -5.1741 12.167
0.62889 -5.2513 12.414
0.63402 -5.3119 12.499
0.63914 -5.4832 12.645
0.6426 -5.4622 12.685
0.64606 -5.3466 12.751
0.6484 -5.3442 12.79
0.65073 -5.3557 12.857
0.65231 -5.3354 12.856
0.65389 -5.4243 12.954
0.65625 -5.3595 12.932
0.65785 -5.444 12.971
0.65944 -5.5387 12.952
0.66044 -5.5328 12.991
1. -914.19 672.05
FIGURE 19
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Axial 3
TABLE 41
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Axial 3
Time [s] Minimum [MPa] Maximum [MPa]
0.2 1.5653 7.019
0.4 3.1306 14.038
0.55 4.3046 19.302
0.58375 4.5705 20.483
0.6175 4.8863 21.59
0.62889 4.9786 21.975
0.63402 5.0167 22.131
0.63914 5.0992 22.463
0.6426 5.103 22.452
0.64606 5.1551 22.48
0.6484 5.1835 22.514
0.65073 5.2166 22.628
0.65231 5.2355 22.613
0.65389 5.2561 22.766
0.65625 5.2829 22.711
0.65785 5.3113 22.814
0.65944 5.3157 22.816
0.66044 5.3495 22.833
1. -1872. 1338.7
FIGURE 20
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Axial 4
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 19 of 42
TABLE 42
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Axial 4
Time [s] Minimum [MPa] Maximum [MPa]
0.2 2.4623 10.797
0.4 4.9247 21.594
0.55 6.7714 29.691
0.58375 7.1866 31.529
0.6175 7.5805 33.563
0.62889 7.7427 34.164
0.63402 7.7895 34.58
0.63914 7.8971 34.996
0.6426 7.9121 35.265
0.64606 7.9539 35.391
0.6484 7.9778 35.568
0.65073 8.0303 35.742
0.65231 8.0205 35.884
0.65389 8.1107 35.994
0.65625 8.0737 36.131
0.65785 8.1134 36.255
0.65944 8.0963 36.401
0.66044 8.1349 36.427
1. -2833.5 2127.1
FIGURE 21
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Axial Inner
TABLE 43
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Axial Inner
Time [s] Minimum [MPa] Maximum [MPa]
0.2 -5.3528 -2.1083
0.4 -10.706 -4.2165
0.55 -14.72 -5.7977
0.58375 -15.625 -6.1532
0.6175 -16.576 -6.4966
0.62889 -16.873 -6.6182
0.63402 -17.075 -6.6462
0.63914 -17.177 -6.7209
0.6426 -17.364 -6.7033
0.64606 -17.412 -6.7461
0.6484 -17.507 -6.7423
0.65073 -17.548 -6.7816
0.65231 -17.636 -6.7544
0.65389 -17.654 -6.8012
0.65625 -17.754 -6.7839
0.65785 -17.81 -6.7819
0.65944 -6.742
-17.905
0.66044 -6.7721
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 20 of 42
1. -140.49 164.99
FIGURE 22
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Axial outer
TABLE 44
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Axial outer
Time [s] Minimum [MPa] Maximum [MPa]
0.2 -0.54694 2.6481
0.4 -1.0939 5.2962
0.55 -1.5041 7.2823
0.58375 -1.5966 7.7299
0.6175 -1.7055 8.1973
0.62889 -1.7299 8.3369
0.63402 -1.7715 8.4387
0.63914 -1.7414 8.5076
0.6426 -1.8125 8.5701
0.64606 -1.8255 8.5776
0.6484 -1.8617 8.6071
0.65073 -1.8523 8.6345
0.65231 -1.9077 8.6625
0.65389 -1.8609 8.6819
0.65625 -1.9314 8.7028
0.65785 -1.9511 8.7195
0.65944 -2.0266 8.7466
0.66044 -2.0117 8.7388
1. -1274. 3273.5
FIGURE 23
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Hoop outer
TABLE 45
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Hoop outer
Time [s] Minimum [MPa] Maximum [MPa]
0.2 0.54821 3.7386
0.4 1.0964 7.4772
0.55 1.5076 10.281
0.58375 1.5999 10.913
0.6175 1.691 11.585
0.62889 1.7205 11.783
0.63402 1.7309 11.953
0.63914 1.7243 12.01
0.6426 1.7407 12.174
0.64606 1.7616 12.195
0.6484 1.7629 12.286
0.65073 1.7724 12.308
0.65231 1.7701 12.422
0.65389 1.7739 12.384
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 21 of 42
FIGURE 24
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Hoop outer > Figure
TABLE 46
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Results
Object Name Hoop inner Normal Stress Normal Stress 2 Normal Stress 3 Normal Stress 4
State Solve Failed Solved Solve Failed
Scope
Scoping Method Geometry Selection Path Named Selection Path
Geometry All Bodies All Bodies
Sub Scope By Ply Layer Ply Layer
Ply P1L1__HDPE inner(ACP (Pre)) First layer
Position Top/Bottom Top Top/Bottom Top
Path Path 2 Path Path
Layer Entire Section Entire Section
Named Selection MEDIUM DISK
Definition
Type Normal Stress Normal Stress Normal Stress
Orientation Y Axis X Axis Y Axis
By Time Time Time
Display Time Last 0.4 s Last
Coordinate System cylindrical Fiber Coordinate System cylindrical
Calculate Time History Yes Yes Yes
Identifier
Suppressed No No No
Integration Point Results
Display Option Averaged Averaged Averaged
Average Across Bodies No No No
Results
Minimum -72.025 MPa 0. MPa -72.145 MPa 99.952 MPa -72.145 MPa
Maximum 105.82 MPa 0. MPa 84.104 MPa 102.91 MPa 84.104 MPa
Minimum Occurs On SolidModel.1 SolidModel.1 SolidModel.1 SolidModel.1
Maximum Occurs On SolidModel.1 SolidModel.1 SolidModel.1 SolidModel.1
Minimum Value Over Time
Minimum -72.025 MPa 0. MPa -72.145 MPa -579.05 MPa -72.145 MPa
Maximum -1.6651 MPa 0. MPa 7.5587 MPa 165.03 MPa 7.5587 MPa
Maximum Value Over Time
Minimum 1.9515 MPa 0. MPa 49.31 MPa 51.455 MPa 49.31 MPa
Maximum 105.82 MPa 0. MPa 162.83 MPa 829.86 MPa 162.83 MPa
Information
Time 1. s 0.4 s 1. s
Load Step 1 1 1
Substep 999999 2 999999
Iteration Number 68 3 68
Graph Controls
X-Axis S S
FIGURE 25
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Hoop inner
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 22 of 42
TABLE 47
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Hoop inner
Time [s] Minimum [MPa] Maximum [MPa]
0.2 -1.6651 1.9515
0.4 -3.3302 3.9031
0.55 -4.579 5.3667
0.58375 -4.8596 5.6961
0.6175 -5.1374 6.0366
0.62889 -5.2301 6.1449
0.63402 -5.2716 6.2143
0.63914 -5.3532 6.2367
0.6426 -5.3472 6.3093
0.64606 -5.3632 6.3443
0.6484 -5.3785 6.3852
0.65073 -5.3967 6.3986
0.65231 -5.4011 6.4463
0.65389 -5.4274 6.4284
0.65625 -5.43 6.4894
0.65785 -5.4458 6.5117
0.65944 -5.4452 6.5704
0.66044 -5.4497 6.5726
1. -72.025 105.82
FIGURE 26
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Normal Stress
TABLE 48
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Normal Stress
Length [mm] Value [MPa]
0.
5.2083
10.417
15.625
20.833
26.042
31.25
36.458
41.667
46.875
52.083
57.292
62.5
67.708
72.917
78.125
83.333
88.542
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 23 of 42
93.75
98.958
104.17
109.38
114.58
119.79
125.
130.21
135.42
140.63
145.83
151.04
156.25
161.46
166.67
171.88
177.08
182.29
187.5
192.71
197.92
203.13
208.33
213.54
218.75
223.96
229.17
234.38
239.58
244.79
250.
FIGURE 27
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Normal Stress 2
TABLE 49
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Normal Stress 2
Length [mm] Value [MPa]
0.
0.13696
0.27392
0.41088
0.54784
0.6848
0.82176
0.95873
1.0957
1.2326
1.3696
1.5066
1.6435
1.7805
1.9175
2.0544
2.1914
2.3283
2.4653
2.6023 -22.656
2.7392 -23.364
2.8762 -24.072
3.0131 -24.78
3.1501 -25.488
3.2871 -26.196
3.424 -26.904
3.561 -27.612
3.6979 -28.32
3.8349 -29.028
3.9719 -29.736
4.1088 -30.444
4.2458 -31.153
4.3827 -31.861
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 24 of 42
4.5197 -32.569
4.6567 -33.277
4.7936 -33.985
4.9306 -34.693
5.0675 -41.483
5.2045 -51.704
5.3415 -61.925
5.4784 -72.145
5.6154 -57.857
5.7524 -42.609
5.8893 -27.361
6.0263 -8.4493
6.1632 19.642
6.3002 47.733
6.4372 75.825
6.5741 84.104
6.7111 79.617
6.848 75.129
6.985 70.641
FIGURE 28
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Normal Stress 3
TABLE 50
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Normal Stress 3
Time [s] Minimum [MPa] Maximum [MPa]
0.2 49.976 51.455
0.4 99.952 102.91
0.55 137.43 141.5
0.58375 145.87 150.18
0.6175 154.29 158.86
0.62889 157.15 161.8
0.63402 158.42 163.11
0.63914 159.72 164.45
0.6426 160.57 165.33
0.64606 161.44 166.22
0.6484 162.02 166.81
0.65073 162.61 167.43
0.65231 162.99 167.82
0.65389 163.42 168.26
0.65625 163.98 168.84
0.65785 164.39 169.25
0.65944 164.77 169.65
0.66044 165.03 169.92
1. -579.05 829.86
FIGURE 29
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Normal Stress 4
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 25 of 42
TABLE 51
Model (C2) > Static Structural (C3) > Solution (C4) > Normal Stress > Normal Stress 4
Length [mm] Value [MPa]
0.
0.13696
0.27392
0.41088
0.54784
0.6848
0.82176
0.95873
1.0957
1.2326
1.3696
1.5066
1.6435
1.7805
1.9175
2.0544
2.1914
2.3283
2.4653
2.6023 -22.656
2.7392 -23.364
2.8762 -24.072
3.0131 -24.78
3.1501 -25.488
3.2871 -26.196
3.424 -26.904
3.561 -27.612
3.6979 -28.32
3.8349 -29.028
3.9719 -29.736
4.1088 -30.444
4.2458 -31.153
4.3827 -31.861
4.5197 -32.569
4.6567 -33.277
4.7936 -33.985
4.9306 -34.693
5.0675 -41.483
5.2045 -51.704
5.3415 -61.925
5.4784 -72.145
5.6154 -57.857
5.7524 -42.609
5.8893 -27.361
6.0263 -8.4493
6.1632 19.642
6.3002 47.733
6.4372 75.825
6.5741 84.104
6.7111 79.617
6.848 75.129
6.985 70.641
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 26 of 42
FIGURE 30
Model (C2) > Static Structural (C3) > Solution (C4) > Energy Dissipated Per Unit Volume > Energy Dissipated Per Unit Volume
TABLE 53
Model (C2) > Static Structural (C3) > Solution (C4) > Energy Dissipated Per Unit Volume > Energy Dissipated Per Unit Volume
Time [s] Minimum [mJ/mm³] Maximum [mJ/mm³]
0.2
0.4 0.
0.55
0.58375 2.3296e-003
0.6175 2.4272e-002
0.62889 2.8075e-002
0.63402 4.1149e-002
0.63914 6.0325e-002
0.6426 6.8195e-002
0.64606 0. 7.6665e-002
0.6484 8.3069e-002
0.65073 8.88e-002
0.65231 9.3776e-002
0.65389 0.10944
0.65625 0.11625
0.65785 0.1207
0.65944 0.12687
0.66044 0.13257
1. 0.13579
FIGURE 31
Model (C2) > Static Structural (C3) > Solution (C4) > Energy Dissipated Per Unit Volume > Energy Dissipated Per Unit Volume 2
TABLE 54
Model (C2) > Static Structural (C3) > Solution (C4) > Energy Dissipated Per Unit Volume > Energy Dissipated Per Unit Volume 2
Time [s] Minimum [mJ/mm³] Maximum [mJ/mm³]
0.2
0.4
0.55
0.
0.58375
0.6175
0.62889
0.63402 2.6403e-003
0.63914 1.8847e-002
0.6426 0. 2.1869e-002
0.64606 2.6615e-002
0.6484 3.0965e-002
0.65073 3.5057e-002
0.65231 3.9094e-002
0.65389 5.6934e-002
0.65625 6.2873e-002
0.65785 6.6878e-002
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 27 of 42
0.65944 7.2763e-002
0.66044 7.9715e-002
1. 8.2792e-002
FIGURE 32
Model (C2) > Static Structural (C3) > Solution (C4) > Energy Dissipated Per Unit Volume > Energy Dissipated Per Unit Volume 3
TABLE 55
Model (C2) > Static Structural (C3) > Solution (C4) > Energy Dissipated Per Unit Volume > Energy Dissipated Per Unit Volume 3
Time [s] Minimum [mJ/mm³] Maximum [mJ/mm³]
0.2
0.4
0.55
0.
0.58375
0.6175
0.62889
0.63402 7.389e-004
0.63914 1.1814e-002
0.6426 1.3307e-002
0.64606 0. 1.5373e-002
0.6484 1.7176e-002
0.65073 1.8877e-002
0.65231 2.1145e-002
0.65389 3.7525e-002
0.65625 4.1781e-002
0.65785 4.4894e-002
0.65944 5.0314e-002
0.66044 5.7325e-002
1. 6.1571e-002
FIGURE 33
Model (C2) > Static Structural (C3) > Solution (C4) > Energy Dissipated Per Unit Volume > Energy Dissipated Per Unit Volume 4
TABLE 56
Model (C2) > Static Structural (C3) > Solution (C4) > Energy Dissipated Per Unit Volume > Energy Dissipated Per Unit Volume 4
Time [s] Minimum [mJ/mm³] Maximum [mJ/mm³]
0.2
0.4 0.
0.55
0.58375 3.6917e-004
0.6175 5.1954e-003
0.62889 6.0687e-003
0.63402 0. 7.6551e-003
0.63914 1.8885e-002
0.6426 2.0151e-002
0.64606 2.1732e-002
0.6484 2.3036e-002
0.65073 2.4274e-002
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 28 of 42
0.65231 2.5379e-002
0.65389 4.0901e-002
0.65625 4.2523e-002
0.65785 4.3754e-002
0.65944 4.6209e-002
0.66044 5.2165e-002
1. 5.5612e-002
FIGURE 34
Model (C2) > Static Structural (C3) > Solution (C4) > Fiber Tensile Damage Variable > Fiber Tensile Damage Variable
TABLE 58
Model (C2) > Static Structural (C3) > Solution (C4) > Fiber Tensile Damage Variable > Fiber Tensile Damage Variable
Time [s] Minimum Maximum
0.2
0.4
0.
0.55
0.58375
0.6175 1.4904e-002
0.62889 1.7256e-002
0.63402 2.8784e-002
0.63914 3.6406e-002
0.6426 4.5007e-002
0.64606 0. 5.2402e-002
0.6484 5.8032e-002
0.65073 6.2742e-002
0.65231 6.6675e-002
0.65389 7.0072e-002
0.65625 7.5784e-002
0.65785 7.9731e-002
0.65944 8.4354e-002
0.66044 8.7081e-002
1. 8.9739e-002
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 29 of 42
FIGURE 35
Model (C2) > Static Structural (C3) > Solution (C4) > Fiber Tensile Damage Variable > Fiber Tensile Damage Variable 2
TABLE 59
Model (C2) > Static Structural (C3) > Solution (C4) > Fiber Tensile Damage Variable > Fiber Tensile Damage Variable 2
Time [s] Minimum Maximum
0.2
0.4
0.55
0.
0.58375
0.6175
0.62889
0.63402 1.0262e-003
0.63914 1.9065e-003
0.6426 4.7577e-003
0.64606 0. 8.1219e-003
0.6484 1.172e-002
0.65073 1.4733e-002
0.65231 1.7866e-002
0.65389 2.0588e-002
0.65625 2.5586e-002
0.65785 2.9298e-002
0.65944 3.3775e-002
0.66044 3.6533e-002
1. 3.9211e-002
FIGURE 36
Model (C2) > Static Structural (C3) > Solution (C4) > Fiber Tensile Damage Variable > Fiber Tensile Damage Variable 3
TABLE 60
Model (C2) > Static Structural (C3) > Solution (C4) > Fiber Tensile Damage Variable > Fiber Tensile Damage Variable 3
Time [s] Minimum Maximum
0.2
0.4
0.55
0.58375
0.6175
0.62889
0.
0.63402
0.63914
0.6426 0.
0.64606
0.6484
0.65073
0.65231 8.8154e-004
0.65389 1.643e-003
0.65625 4.1886e-003
0.65785 6.5324e-003
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 30 of 42
0.65944 9.9804e-003
0.66044 1.2194e-002
1. 1.4207e-002
FIGURE 37
Model (C2) > Static Structural (C3) > Solution (C4) > Fiber Tensile Damage Variable > Fiber Tensile Damage Variable 4
TABLE 61
Model (C2) > Static Structural (C3) > Solution (C4) > Fiber Tensile Damage Variable > Fiber Tensile Damage Variable 4
Time [s] Minimum Maximum
0.2
0.4
0.55
0.58375
0.6175
0.62889
0.63402
0.63914
0.
0.6426
0.64606 0.
0.6484
0.65073
0.65231
0.65389
0.65625
0.65785
0.65944 4.1331e-004
0.66044 6.4871e-004
1. 8.6271e-004
Directional Deformation
TABLE 62
Model (C2) > Static Structural (C3) > Solution (C4) > Directional Deformation > Results
Object Name Directional Deformation
State Solve Failed
Scope
Scoping Method Geometry Selection
Geometry All Bodies
Definition
Type Directional Deformation
Orientation Y Axis
By Time
Display Time Last
Coordinate System cylindrical
Calculate Time History Yes
Identifier
Suppressed No
Results
Minimum -0.68857 mm
Maximum 0.59929 mm
Minimum Occurs On SolidModel.1
Maximum Occurs On SolidModel.1
Minimum Value Over Time
Minimum -0.68857 mm
Maximum -5.214e-004 mm
Maximum Value Over Time
Minimum 6.6487e-004 mm
Maximum 0.59929 mm
Information
Time 1. s
Load Step 1
Substep 999999
Iteration Number 68
FIGURE 38
Model (C2) > Static Structural (C3) > Solution (C4) > Directional Deformation > Directional Deformation
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 31 of 42
TABLE 63
Model (C2) > Static Structural (C3) > Solution (C4) > Directional Deformation > Directional Deformation
Time [s] Minimum [mm] Maximum [mm]
0.2 -5.214e-004 6.6487e-004
0.4 -1.0428e-003 1.3297e-003
0.55 -1.4338e-003 1.8284e-003
0.58375 -1.5218e-003 1.9406e-003
0.6175 -1.6096e-003 2.0527e-003
0.62889 -1.6395e-003 2.0907e-003
0.63402 -1.6527e-003 2.1076e-003
0.63914 -1.6665e-003 2.181e-003
0.6426 -1.6745e-003 2.1359e-003
0.64606 -1.6831e-003 2.1478e-003
0.6484 -1.6897e-003 2.1575e-003
0.65073 -1.696e-003 2.167e-003
0.65231 -1.6985e-003 2.172e-003
0.65389 -1.7054e-003 2.1831e-003
0.65625 -1.7085e-003 2.1887e-003
0.65785 -1.7135e-003 2.2002e-003
0.65944 -1.717e-003 2.2075e-003
0.66044 -1.7202e-003 2.2137e-003
1. -0.68857 0.59929
FIGURE 39
Model (C2) > Static Structural (C3) > Solution (C4) > Matrix Tensile Damage Variable > Matrix Tensile Damage Variable 1st ply
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 32 of 42
TABLE 65
Model (C2) > Static Structural (C3) > Solution (C4) > Matrix Tensile Damage Variable > Matrix Tensile Damage Variable 1st ply
Time [s] Minimum Maximum
0.2
0.4
0.55
0.
0.58375
0.6175
0.62889
0.63402 5.2912e-003
0.63914 9.7096e-003
0.6426 1.3833e-002
0.64606 0. 1.7718e-002
0.6484 2.0755e-002
0.65073 2.3967e-002
0.65231 2.6727e-002
0.65389 2.9631e-002
0.65625 3.3961e-002
0.65785 3.6858e-002
0.65944 3.991e-002
0.66044 4.1649e-002
1. 4.3303e-002
FIGURE 40
Model (C2) > Static Structural (C3) > Solution (C4) > Matrix Tensile Damage Variable > Matrix Tensile Damage Variable ply 2
TABLE 66
Model (C2) > Static Structural (C3) > Solution (C4) > Matrix Tensile Damage Variable > Matrix Tensile Damage Variable ply 2
Time [s] Minimum Maximum
0.2
0.4
0.55
0.
0.58375
0.6175
0.62889
0.63402 5.097e-003
0.63914 9.3348e-003
0.6426 1.6198e-002
0.64606 0. 2.2656e-002
0.6484 2.816e-002
0.65073 3.2697e-002
0.65231 3.6877e-002
0.65389 4.0488e-002
0.65625 4.6745e-002
0.65785 5.1317e-002
0.65944 5.6639e-002
0.66044 5.9739e-002
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 33 of 42
1. 6.2823e-002
FIGURE 41
Model (C2) > Static Structural (C3) > Solution (C4) > Matrix Tensile Damage Variable > Matrix Tensile Damage Variable ply 3
TABLE 67
Model (C2) > Static Structural (C3) > Solution (C4) > Matrix Tensile Damage Variable > Matrix Tensile Damage Variable ply 3
Time [s] Minimum Maximum
0.2
0.4
0.55
0.
0.58375
0.6175
0.62889
0.63402 2.1465e-003
0.63914 4.5204e-003
0.6426 1.0234e-002
0.64606 0. 1.5822e-002
0.6484 2.0806e-002
0.65073 2.4943e-002
0.65231 2.8857e-002
0.65389 3.2246e-002
0.65625 3.821e-002
0.65785 4.2565e-002
0.65944 4.7647e-002
0.66044 5.0546e-002
1. 5.3383e-002
FIGURE 42
Model (C2) > Static Structural (C3) > Solution (C4) > Matrix Tensile Damage Variable > Matrix Tensile Damage Variable ply 4
TABLE 68
Model (C2) > Static Structural (C3) > Solution (C4) > Matrix Tensile Damage Variable > Matrix Tensile Damage Variable ply 4
Time [s] Minimum Maximum
0.2
0.4 0.
0.55
0.58375 2.8591e-003
0.6175 2.6774e-002
0.62889 3.0548e-002
0.63402 3.6759e-002
0.63914 0. 4.0882e-002
0.6426 4.5015e-002
0.64606 4.9643e-002
0.6484 5.4428e-002
0.65073 5.8506e-002
0.65231 6.2088e-002
0.65389 6.5181e-002
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 34 of 42
0.65625 7.0606e-002
0.65785 7.451e-002
0.65944 7.9165e-002
0.66044 8.1838e-002
1. 8.4366e-002
FIGURE 43
Model (C2) > Static Structural (C3) > Solution (C4) > Matrix Compressive Damage Variable > Matrix Compressive Damage Variable
TABLE 70
Model (C2) > Static Structural (C3) > Solution (C4) > Matrix Compressive Damage Variable > Matrix Compressive Damage Variable
Time [s] Minimum Maximum
0.2
0.4 0.
0.55
0.58375 6.94e-003
0.6175 4.1437e-002
0.62889 4.7137e-002
0.63402 5.9475e-002
0.63914 6.7632e-002
0.6426 7.621e-002
0.64606 0. 8.3656e-002
0.6484 8.9302e-002
0.65073 9.4017e-002
0.65231 9.7924e-002
0.65389 0.1013
0.65625 0.10696
0.65785 0.11086
0.65944 0.11547
0.66044 0.11819
1. 0.12083
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 35 of 42
FIGURE 44
Model (C2) > Static Structural (C3) > Solution (C4) > Matrix Compressive Damage Variable > Matrix Compressive Damage Variable 2
TABLE 71
Model (C2) > Static Structural (C3) > Solution (C4) > Matrix Compressive Damage Variable > Matrix Compressive Damage Variable 2
Time [s] Minimum Maximum
0.2
0.4
0.55
0.
0.58375
0.6175
0.62889
0.63402 8.9537e-004
0.63914 1.6954e-003
0.6426 4.3336e-003
0.64606 0. 6.7946e-003
0.6484 8.8948e-003
0.65073 1.0762e-002
0.65231 1.2423e-002
0.65389 1.3858e-002
0.65625 1.6416e-002
0.65785 1.8254e-002
0.65944 2.0396e-002
0.66044 2.1617e-002
1. 2.282e-002
FIGURE 45
Model (C2) > Static Structural (C3) > Solution (C4) > Matrix Compressive Damage Variable > Matrix Compressive Damage Variable 3
TABLE 72
Model (C2) > Static Structural (C3) > Solution (C4) > Matrix Compressive Damage Variable > Matrix Compressive Damage Variable 3
Time [s] Minimum Maximum
0.2
0.4
0.55
0.58375
0.6175
0.62889
0.63402
0.63914
0.6426 0. 0.
0.64606
0.6484
0.65073
0.65231
0.65389
0.65625
0.65785
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 36 of 42
0.65944
0.66044
1.
FIGURE 46
Model (C2) > Static Structural (C3) > Solution (C4) > Matrix Compressive Damage Variable > Matrix Compressive Damage Variable 4
TABLE 73
Model (C2) > Static Structural (C3) > Solution (C4) > Matrix Compressive Damage Variable > Matrix Compressive Damage Variable 4
Time [s] Minimum Maximum
0.2
0.4
0.55
0.58375
0.6175
0.62889
0.63402
0.63914
0.6426
0.64606 0. 0.
0.6484
0.65073
0.65231
0.65389
0.65625
0.65785
0.65944
0.66044
1.
FIGURE 47
Model (C2) > Static Structural (C3) > Solution (C4) > Fiber Compressive Damage Variable > Fiber Compressive Damage Variable
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 37 of 42
TABLE 75
Model (C2) > Static Structural (C3) > Solution (C4) > Fiber Compressive Damage Variable > Fiber Compressive Damage Variable
Time [s] Minimum Maximum
0.2
0.4
0.55
0.58375
0.6175
0.62889
0.63402
0.63914
0.6426
0.64606 0. 0.
0.6484
0.65073
0.65231
0.65389
0.65625
0.65785
0.65944
0.66044
1.
FIGURE 48
Model (C2) > Static Structural (C3) > Solution (C4) > Fiber Compressive Damage Variable > Fiber Compressive Damage Variable 2
TABLE 76
Model (C2) > Static Structural (C3) > Solution (C4) > Fiber Compressive Damage Variable > Fiber Compressive Damage Variable 2
Time [s] Minimum Maximum
0.2
0.4
0.55
0.58375
0.6175
0.62889
0.63402
0.63914
0.6426
0.64606 0. 0.
0.6484
0.65073
0.65231
0.65389
0.65625
0.65785
0.65944
0.66044
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 38 of 42
1.
FIGURE 49
Model (C2) > Static Structural (C3) > Solution (C4) > Fiber Compressive Damage Variable > Fiber Compressive Damage Variable 3
TABLE 77
Model (C2) > Static Structural (C3) > Solution (C4) > Fiber Compressive Damage Variable > Fiber Compressive Damage Variable 3
Time [s] Minimum Maximum
0.2
0.4
0.55
0.58375
0.6175
0.62889
0.63402
0.63914
0.6426
0.64606 0. 0.
0.6484
0.65073
0.65231
0.65389
0.65625
0.65785
0.65944
0.66044
1.
FIGURE 50
Model (C2) > Static Structural (C3) > Solution (C4) > Fiber Compressive Damage Variable > Fiber Compressive Damage Variable 4
TABLE 78
Model (C2) > Static Structural (C3) > Solution (C4) > Fiber Compressive Damage Variable > Fiber Compressive Damage Variable 4
Time [s] Minimum Maximum
0.2
0.4
0.55
0.58375
0.6175
0.62889
0.63402
0.63914 0. 0.
0.6426
0.64606
0.6484
0.65073
0.65231
0.65389
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 39 of 42
0.65625
0.65785
0.65944
0.66044
1.
FIGURE 51
Model (C2) > Static Structural (C3) > Solution (C4) > Shear Damage Variable > Shear Damage Variable
TABLE 80
Model (C2) > Static Structural (C3) > Solution (C4) > Shear Damage Variable > Shear Damage Variable
Time [s] Minimum Maximum
0.2
0.4 0.
0.55
0.58375 6.94e-003
0.6175 5.5395e-002
0.62889 6.3152e-002
0.63402 8.6087e-002
0.63914 0.10109
0.6426 0.11726
0.64606 0. 0.13114
0.6484 0.14161
0.65073 0.15031
0.65231 0.15752
0.65389 0.16372
0.65625 0.17409
0.65785 0.18121
0.65944 0.18955
0.66044 0.19446
1. 0.19921
FIGURE 52
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 40 of 42
Model (C2) > Static Structural (C3) > Solution (C4) > Shear Damage Variable > Shear Damage Variable 2
TABLE 81
Model (C2) > Static Structural (C3) > Solution (C4) > Shear Damage Variable > Shear Damage Variable 2
Time [s] Minimum Maximum
0.2
0.4
0.55
0.
0.58375
0.6175
0.62889
0.63402 6.1163e-003
0.63914 1.1219e-002
0.6426 2.0863e-002
0.64606 0. 3.0569e-002
0.6484 3.9519e-002
0.65073 4.6911e-002
0.65231 5.4044e-002
0.65389 6.0185e-002
0.65625 7.1078e-002
0.65785 7.9062e-002
0.65944 8.8445e-002
0.66044 9.3922e-002
1. 9.9526e-002
FIGURE 53
Model (C2) > Static Structural (C3) > Solution (C4) > Shear Damage Variable > Shear Damage Variable 3
TABLE 82
Model (C2) > Static Structural (C3) > Solution (C4) > Shear Damage Variable > Shear Damage Variable 3
Time [s] Minimum Maximum
0.2
0.4
0.55
0.
0.58375
0.6175
0.62889
0.63402 2.1465e-003
0.63914 4.5204e-003
0.6426 0. 1.0234e-002
0.64606 1.5822e-002
0.6484 2.0806e-002
0.65073 2.4943e-002
0.65231 2.9656e-002
0.65389 3.3773e-002
0.65625 4.2238e-002
0.65785 4.8812e-002
0.65944 5.6978e-002
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 41 of 42
0.66044 6.1899e-002
1. 6.682e-002
FIGURE 54
Model (C2) > Static Structural (C3) > Solution (C4) > Shear Damage Variable > Shear Damage Variable 4
TABLE 83
Model (C2) > Static Structural (C3) > Solution (C4) > Shear Damage Variable > Shear Damage Variable 4
Time [s] Minimum Maximum
0.2
0.4 0.
0.55
0.58375 2.8591e-003
0.6175 2.6774e-002
0.62889 3.0548e-002
0.63402 3.6759e-002
0.63914 4.0882e-002
0.6426 4.5015e-002
0.64606 0. 4.9643e-002
0.6484 5.4428e-002
0.65073 5.8506e-002
0.65231 6.2088e-002
0.65389 6.5181e-002
0.65625 7.0606e-002
0.65785 7.451e-002
0.65944 7.9165e-002
0.66044 8.1838e-002
1. 8.4366e-002
Material Data
HDPE_int
TABLE 84
HDPE_int > Constants
Density 9.7e-007 kg mm^-3
TABLE 85
HDPE_int > Isotropic Elasticity
Temperature C Young's Modulus MPa Poisson's Ratio Bulk Modulus MPa Shear Modulus MPa
1340 0.4 2233.3 478.57
TABLE 86
HDPE_int > Tensile Yield Strength
Tensile Yield Strength MPa
37
TABLE 87
HDPE_int > Tensile Ultimate Strength
Tensile Ultimate Strength MPa
38
TABLE 88
HDPE_int > Color
Red Green Blue
-1 -1 -1
Epoxy-EGlass_Wet
TABLE 89
Epoxy-EGlass_Wet > Constants
Density 1.85e-006 kg mm^-3
TABLE 90
Epoxy-EGlass_Wet > Orthotropic Elasticity
Temperature Young's Modulus X Young's Modulus Y Young's Modulus Z Poisson's Poisson's Poisson's Shear Modulus Shear Modulus Shear Modulus
C direction MPa direction MPa direction MPa Ratio XY Ratio YZ Ratio XZ XY MPa YZ MPa XZ MPa
35000 9000 9000 0.28 0.4 0.28 4700 3500 4700
TABLE 91
Epoxy-EGlass_Wet > Orthotropic Strain Limits
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018
Project Page 42 of 42
Temperature Tensile X Tensile Y Tensile Z Compressive X Compressive Y Compressive Z Shear Shear Shear
C direction direction direction direction direction direction XY YZ XZ
2.44e-002 3.8e-003 3.8e-003 -1.5e-002 -1.25e-002 -1.25e-002 1.5e-002 1.2e-002 1.5e-002
TABLE 92
Epoxy-EGlass_Wet > Orthotropic Stress Limits
Temperature Tensile X Tensile Y Tensile Z Compressive X Compressive Y Compressive Z Shear XY Shear YZ Shear XZ
C direction MPa direction MPa direction MPa direction MPa direction MPa direction MPa MPa MPa MPa
780 31 31 -480 -100 -100 60 35 60
TABLE 93
Epoxy-EGlass_Wet > Orthotropic Secant Coefficient of Thermal Expansion
Coefficient of Thermal Expansion X direction Coefficient of Thermal Expansion Y direction Coefficient of Thermal Expansion Z direction
Temperature C
C^-1 C^-1 C^-1
5.5e-006 2.5e-005 2.5e-005
Zero-Thermal-Strain Reference
Temperature C
20
TABLE 94
Epoxy-EGlass_Wet > Puck Constants
Temperature C Compressive Inclination XZ Compressive Inclination YZ Tensile Inclination XZ Tensile Inclination YZ
0.25 0.2 0.3 0.2
TABLE 95
Epoxy-EGlass_Wet > Additional Puck Constants
Interface Weakening Factor Degradation Parameter s Degradation Parameter M
0.8 0.5 0.5
TABLE 96
Epoxy-EGlass_Wet > Tsai-Wu Constants
Temperature C Coupling Coefficient XY Coupling Coefficient YZ Coupling Coefficient XZ
-1 -1 -1
TABLE 97
Epoxy-EGlass_Wet > Damage Evolution Law
Energy Dissipated Viscous Damping Energy Dissipated per Viscous Damping Energy Dissipated Viscous Damping Energy Dissipated per Viscous Damping
per Unit Area from Coefficient for Unit Area from Coefficient for per Unit Area from Coefficient for Unit Area from Coefficient for
Tensile Fiber Tensile Fiber Compressive Fiber Compressive Fiber Tensile Matrix Tensile Matrix Compressive Matrix Compressive Matrix
Damage N mm^-1 Damage Damage N mm^-1 Damage Damage N mm^-1 Damage Damage N mm^-1 Damage
490 1.e-002 100 1.e-002 25 1.e-002 110 1.e-002
TABLE 98
Epoxy-EGlass_Wet > Color
Red Green Blue
-1 -1 -1
file:///C:/Users/Juan/AppData/Roaming/Ansys/v171/Mechanical_Report/Mechanical_... 5/16/2018