Professional Documents
Culture Documents
Woltman Type PDF
Woltman Type PDF
Working Condition
Features
· Removable element structure, easy installation · Water temperature: 0.1℃~40℃ ( 0.1℃~90℃
and maintenance, register for universal use within for hot water meter).
this range detachable without Removing the · Water pressure: PN10/16/25.
meter from the pipeline.
· Dry-dial, Magnetic drive sensitive action, small Maximum Permissible Error
pressure loss.
· Vacuum sealed register ensures the dial keep · In the lower zone from qmin inclusive up to but
free from fog and Keep the reading clear in a excluding qt is ±5%.
long term service. · In the upper zone from qt inclusive up to and
· Selected high quality materials for steady & including qs is ±2% (±3% for hot water meter).
reliable charac teristic.
· Technical data conform to international standard Flow Error Curve
ISO 4064. +5
(%)
+2
Optional Features
· Plastic register, copper register and full glass 0
Error
register.
-2
· Accuracy: R=50/80.
· Size: DN50-500mm.
· Cold / Hot water.
· Reed switch option.
-5
· Flange standard can be choose. q q q
· 360 degree rotate can be choose. min t p
· Cast iron, Ductile iron, SS304,SS316 body can q
s
be choose.
Flow Rate
· Working pressure: PN16/25.
(m /h)
· Color can be change on body and cover.
3
Dimensions
D2
3. Sealed Register
L 24. Retainer
NOTE: The flange dimension conforms to ISO7005-2:1988 13. Connecting Lever 33. Transmission Shaft
standard. Order for products of special requirements
is also accepted.
14. Adjusting Plate 34. Sheath
Pulse Position
15. Support
Size Pulse Position
16. Bolt 35. Bevel Gear
DN50-65 10/100/1000L/Pulse
17. Turbine Component 36. Lower Bearing
DN80-200 100/1000L/Pulse
DN250-300 1000L/Pulse 18. Rectifier
37. Gasket
38. Screw
Pressure Loss Curve
39. Nut
0.03 DN50 DN65DN80DN100DN125 DN150 DN200DN250DN300
19. Screw
40. Gasket
Pressure Loss (MPa)
0.02
41. Turbine Shaft Hold
0.01
20. O-ring 42. Turbine Shaft
21. Body
Flow Technique Specification
Nominal Flow Maximum Permanent Maximum Permanent Minimum Reading Maximum Reading
Flow Q4 Flow Q3 Q3 /Q1 Q2 /Q1 Flow Q2 Flow Q1 Full Glass Seal Common Seal Full Glass Seal Common Seal
DN m 3 /h m 3 /h m3
31.3 25 50 1.6 0.8 0.5
50 4 2 0.0005 0.0002 999,999 999,999
50 40 80 1.6 0.8 0.5
4 2
50 1.6 1.3 0.8
65 50 40 4 3.2 0.0005 0.0002 999,999 999,999
80 1.6 0.8 0.5
4 2
50 1.6 2 1.3
80 78.8 63 4 5 0.002 0.002 999,999 9,999,999
80 1.6 1.3 0.8
4 3.2
50 1.6 3.2 2
100 125 100 4 8 0.002 0.002 999,999 9,999,999
80 1.6 2 1.3
4 5
50 1.6 4 3.2
125 200 160 4 12.8 0.002 0.002 999,999 9,999,999
80 1.6 3.2 2
4 8
50 1.6 8 5
150 312.5 250 4 20 0.002 0.002 999,999 9,999,999
80 1.6 5 3.1
4 12.4
50 1.6 12.8 8
200 500 400 4 32 0.002 0.002 999,999 9,999,999
80 1.6 8 5
4 20
25 1.6 40.3 25.2
250 787.5 630 4 100.8 0.02 0.02 9,999,999 99,999,999
50 1.6 20 12.6
4 50.4
25 1.6 64 40
300 1250 1000 4 160 0.02 0.02 9,999,999 99,999,999
50 1.6 32 20
4 80
Warranty
All meters will be guaranteed against defects in workmanship and materials for a period of one (1) year from
the date of acceptance. Defective meters or parts discovered within this period shall be replaced without
charge upon return to the SH-MECH Meters.