This document summarizes the results of three extrusion trials (Trial A, B, and C) conducted on different dates in October. Each trial used 5000 denier yarn with 14 joint and 5.8 gpd tenacity and 14% ±1% elongation. Trial A used an KTK-1/2 extruder while Trials B and C used an SX90 extruder at different screw configurations. The raw materials, processing dates, machines used, and planned meeting date are also noted.
This document summarizes the results of three extrusion trials (Trial A, B, and C) conducted on different dates in October. Each trial used 5000 denier yarn with 14 joint and 5.8 gpd tenacity and 14% ±1% elongation. Trial A used an KTK-1/2 extruder while Trials B and C used an SX90 extruder at different screw configurations. The raw materials, processing dates, machines used, and planned meeting date are also noted.
This document summarizes the results of three extrusion trials (Trial A, B, and C) conducted on different dates in October. Each trial used 5000 denier yarn with 14 joint and 5.8 gpd tenacity and 14% ±1% elongation. Trial A used an KTK-1/2 extruder while Trials B and C used an SX90 extruder at different screw configurations. The raw materials, processing dates, machines used, and planned meeting date are also noted.