Professional Documents
Culture Documents
Sauter - Katalog 2018 EN
Sauter - Katalog 2018 EN
Sauter - Katalog 2018 EN
TEST SERVICE
reliable availability, product data sheets, FC______________________________________ 10 TE_______________________________________ 40
·· 2 years warranty FH-M___________________________________ 12 TF_______________________________________ 41
user instructions, useful FH-S____________________________________11 TG______________________________________ 41
knowledge, technical glossary, FK________________________________________ 9 THM-N/-S_____________________________ 16
images and much for you to for industry, laboratory and quality assurance FL_______________________________________ 13 TI_______________________________________ 52
diverse HB______________________________________ 50 TN-EE__________________________________ 47
download, practical topic areas, HD______________________________________ 51 TN-US_________________________________ 46
·· One-stop-shopping: from force which will guide you to the right HK-D/-DB_____________________________ 54 TU-US__________________________________ 48
gauges up to light measuring product in your industry as well HMM/-NP_____________________________ 55 TVL_____________________________________ 14
HMO___________________________________ 57 TVM-N/-NL___________________________ 19
instruments – everything from as a smart search engine for HN-D___________________________________ 56 TVO____________________________________ 17
one supplier measuring instruments HO__________________________________ 59/60 TVO-S__________________________________ 18
HO-M___________________________________61 TVP/-L_________________________________ 15
·· Quick as a flash, find the product LB______________________________________ 35 TVS_____________________________________ 20
Printed in Germany
by SAUTER GmbH
z-cs-gb-sp-20181
you want with the “Measuring LD______________________________________ 36
instruments Quick-Finder” at
www.sauter.eu PROFESSIONAL Keyword index
Coating thickness gauge, digital_______________________________________________ 38–41
MEASURING
Do you have questions about our products? Force gauge, digital________________________________________________________________ 9–13
Force gauge, mechanical_____________________________________________________________ 8
Our customer consultants will be pleased to assist you: Hardness tester, digital____________________________________________ 51, 53–57, 59–61
Hardness tester, Leeb___________________________________________________________ 53–57
Hardness tester, Shore_________________________________________________________ 49–52
Product specialist UK, IE, MT, Scandinavia DK, DE (zip code 0, 1, 2) Hardness testing, (UCI)_________________________________________________________ 58–61
Impact type sensor______________________________________________________________ 54–57
Measuring technology
Integrated calliper gauge, digital______________________________________________ 34–36
Leeb hardness tester, digital___________________________________________________ 53–57
Irmgard Russo Marietta Diener Bettina Schwedt Length meter, digital____________________________________________________________ 34–36
Tel. +49 [0] 7433 9933 - 208 Tel. +49 [0] 7433 9933 - 167 Tel. +49 [0] 7433 9933 - 141 Light measuring instrument____________________________________________________ 63, 64
Fax +49 [0] 7433 9933 - 29208 Fax +49 [0] 7433 9933 - 29167 Fax +49 [0] 7433 9933 - 29141 Material thickness gauge, ultrasonic_________________________________________ 42–48
russo@kern-sohn.com Mobil +49 [0] 151 46143236 Mobil +49 [0] 171 3059661 Measuring head, external_______________________________ 38, 40, 41, 43–48, 54-56
Occupational safety_____________________________________________________________ 62–66
diener@kern-sohn.com bettina.schwedt@kern-sohn.com Printer_______________________________________________________________ 10–13, 48, 55–57
Shore hardness tester, analogue___________________________________________________ 50
Software____________________________________________________________________________22–24
ES, PT, Central and South America, EE, BG, South East Asia, AUS, NZ, North America, NL, SLO, HR, BA, RS, MK, Sound level meter_______________________________________________________________ 65, 66
LT, LV, PL Middle East, Africa, Oceania, DE (zip code 3) Germany (zip code 4) Spring balances_____________________________________________________________________ 5–7
Spring tester___________________________________________________________________________ 21
Jesús Martínez Corinna Klaass Taras Mikitisin Test stand, force-, manual_______________________________________________________ 14,15
Tel. +49 [0] 7433 9933 - 209 Tel. +49 [0] 7433 9933 - 215 Tel. +49 [0] 7433 9933 - 143 Test stand, force-, motorised___________________________________________________16–21
Test stand, Shore-, manual__________________________________________________________ 52
Fax +49 [0] 7433 9933 - 29209 Fax +49 [0] 7433 9933 - 29215 Fax +49 [0] 7433 9933 - 29143 Torque gauges____________________________________________________________________ 31–33
Mobil +49 [0] 151 46143229 klaass@kern-sohn.com Mobil +49 [0] 171 5590115 Wall thickness gauge____________________________________________________________ 42–48
jesus.martinez@kern-sohn.com mikitisin@kern-sohn.com
HU, RO Germany zip code 5, 6) GUS, CZ, SK Technical Service Force measurement accessories from page 25
1-jaw-clamp attachment___________ 25 Roll clamps, eccentric______________ 25
Fabienne Kolbus Inna Wandler Stefan Rothmund 2 wide jaw grip attachment________ 25 Roller tension clamps_______________ 26
Tel. +49 [0] 7433 9933 - 305 Tel. +49 [0] 7433 9933 - 167 Tel. +49 [0] 7433 9933 - 179 3-point bending device_____________ 27 Rolling-clamp attachment__________ 25
Adapter________________________________ 30 Rope and thread tension clamps__ 26
Fax +49 [0] 7433 9933 - 29305 Fax +49 [0] 7433 9933 - 29167 Fax +49 [0] 7433 9933 - 195
Angle bracket_________________________ 25 Screw-in tension clamp_____________ 25
fabienne.kolbus@kern-sohn.com wandler@kern-sohn.com rothmund@kern-sohn.com Attachments__________________________ 30 Sensor_________________________________ 27
Ball-shaped head, Stainless steel___ 27 Small clamp___________________________ 25
Belt tension clamps_____________ 26, 27 Tensiometer attachment____________ 30
Cable fixture__________________________ 25 Tombstone tester____________________ 30
DAkkS Calibration Service Carrying strap________________________ 30 Wedge tension clamp_______________ 26
Connection cable____________________ 30 Wide jaw clamp______________________ 25
FR, BeNeLux, DK, GR, TR, North, Door tester____________________________ 30
Drum clamps_________________________ 25
Maghreb, Africa, Central & South
Flat clamp_____________________________ 25
America, Germany (Zip Code 8, 9) Flat jaw attachment_________________ 25
Athina Ioakimidou Force measurement clamp__ 26, 28/29
Tel. +49 [0] 7433 9933 - 123 Grip clamp attachment_____________ 25
Sauter GmbH Tel. +49 [0] 7433 9933 - 0 Fax +49 [0] 7433 9933 - 29123 Handle bar, stainless steel_________ 30
Long clamp___________________________ 25
c/o KERN & SOHN GmbH Fax +49 [0] 7433 9933 - 149 athina.ioakimidou@kern-sohn.com
Parallel jaw grip______________________ 25
Ziegelei 1 Pressure disc_________________________ 27
72336 Balingen info@sauter.eu Quick clamp__________________________ 26
Germany www.sauter.eu Relais module________________________ 30
Ring fixture___________________________ 25
KERN Pictograms Retailer information KERN Calibration service – Test service for measuring instruments
Adjusting program (CAL): GLP/ISO record keeping: KERN Measurand Measuring range Price
For quick setting of the instrument’s of measurement data with date, Sales conditions Services excl. VAT,
accuracy. External adjusting time and serial number. Only DAkkS calibration certificate for force gauges (extract) ex works
weight required. with SAUTER printers All prices are valid as of January 1st 2018 until a new version of the KERN DirectCash: The quick, secure COD procedure for protection Further details on the internet www.kern-lab.com €
SAUTER catalogue is released. In Europe, all prices do not include the against non-payment. With the KERN DirectCash COD system, you can
Calibration block: DAkkS Calibration
Measuring units: applicable V.A.T. safely deliver orders to end customers with unknown credit rating, with
standard for adjusting or
correcting the measuring Weighing units can be switched no risk of non-payment. Please request further details on this procedure. 963-161 Force (Tension) 10 N – 500 N 135,–
to e.g. non-metric at the touch of At SAUTER there is no minimum order value. For orders less than
device. 963-162 > 500 N–2 KN 165,–
a key. Please refer to website for € 15.00 there is no re-sale discount available. Hire Purchase Force (Tension)
more details. Financing is available using KERN hire purchase – easy and convenient. 963-163 Force (Tension) > 2 KN–5 KN 225,–
Peak hold function: Delivery Conditions: we supply ex works Balingen, i.e. the transport
capturing a peak value within a Measuring with tolerance costs are invoiced. Any goods supplied, remain SAUTER’s property Hire Purchase gives you the option of purchasing any product from 963-261 Force (Compression) 10 N – 500 N 135,–
measuring process. range (limit-setting function):
Upper and lower limiting can until Measuring in a tolerance area (limit value function). Upper and the range against a simple monthly installment. The product value is 963-262 Force (Compression) > 500 KN–2 KN 165,–
be programmed individually. lower limit value is programmable. The measurement process is financed over the period of the agreement. On payment of the last 963-263 Force (Compression) > 2 KN–5 KN 225,–
The process is supported by an
D-K-19408-01-00
Scan mode: supported by an acoustic and visual signal, see respective models installment, the ownership of the contract item automatically transfers
continuous capture and display audible or visual signal, see the 963-361 Force (Tens. and Comp.) 10 N – 500 N 245,–
relevant model complete payment for the goods sold has been received. from the contractor to the contractee.
of measurements.
The Hire Purchase Agreement can – if you so choose – be set for a 963-362 Force (Tens. and Comp.) > 500 N–2 KN 300,–
Delivery is usually via courier service.
period of between one and five years. This package includes the transfer
of items as well as the guarantee for the entire transfer period. 963-363 Force (Tens. and Comp.) > 2 KN–5 KN 405,–
Push and Pull: ZERO:
Resets the display to “0”. When you see this symbol by truck, please ask for prices.
the measuring device can capture
tension and compression forces. Compared with buying the product, KERN hire purchase offers the Factory calibration
advantage that the initial financial investment is largely not applicalble. 961-161 ≤ 500 N 135,–
Extract from general terms and conditions: Force (Tension)
This is particularly relevant when purchasing a number of products,
Length measurement: Battery operation: Court of jurisdiction/Legal domicile: 72336 Balingen, Germany; 961-162 Force (Tension) ≤ 2.000 N 165,–
for example when refitting a laboratory, a company department or a
captures the geometric dimensions Ready for battery operation. Commercial register N°: HRB 400865, AG Stuttgart; 961-163 Force (Tension) ≤ 10.000 N 225,–
of a test object or the movement The battery type is specified hospital ward. In addition the monthly installments constitute a direct
Managing director: Albert Sauter, Martin Sauter.
during a test process. for each device. cost and the item does not have to be capitalised by the purchaser. Do 961-164 Force (Tension) ≤ 20.000 N 350,–
For the full Terms and Conditions, please refer to the website.
you have queries to our hire purchase? Our customer consultants are 961-165 Force (Tension) ≤ 50.000 N 520,–
www.kern-sohn.com/en/kern/agbs.html
Focus function: Rechargeable battery pack: glad to help you.
961-166 Force (Tension) ≤ 100.000 N 940,–
increases the measuring rechargeable set. rice changes and product changes are likely in individual cases due
P
accuracy of a device within a to product modifications as well as error. 961-261 Force (Compression) ≤ 500 N 135,–
defined measuring range.
Marketing support 961-262 Force (Compression) ≤ 2.000 N 165,–
Sale or return: within 14 days of purchase. Not valid for order-specific
adaptations such as special productions, cable extensions, special Catalogues, brochures, branch prospectuses – your own 961-263 Force (Compression) ≤ 5.000 N 225,–
Internal memory: Mains adapter:
to save measurements in the 230V/50Hz in standard version weights, etc. or test services such as calibration etc. Depending on the personalised marketing tools 961-361 Force (Tens. and Comp.) ≤ 500 N 245,–
device memory. for EU. On request GB, AUS or time and effort involved, there may be processing and storage costs, Our catalogue and branch prospectuses are available free of charge.
USA version available. 961-362 Force (Tens. and Comp.) ≤ 2.000 N 300,–
please ask for details. A neutral version of the catalogue, without the SAUTER address imprint,
is also available for your marketing activities free of charge, larger 961-363 Force (Tens. and Comp.) ≤ 5.000 N 405,–
Data interface RS-232: Power supply: arranty: 2 years. (Does not apply to consumables such as batteries,
W
bidirectional, for connection of Integrated, 230V/50Hz in EU. quantities on request..
rechargeable battery packs, etc.) ≤ 2.000 µm
printer and PC. More standards e.g. GB, AUS 961-110 Coating thickness 120,–
or USA on request. On demand we will print your company address on address labels F or N
free of charge, for the backside of the catalogue, larger quantities on
Data interface USB: Motorised drive: After-Sales-Service 961-112 Coating thickness
≤ 2.000 µm
170,–
The mechanical movement is request. In this way you will receive your individual marketing tool. FN
To connect the measuring
instrument to a printer, PC carried out by a electric motor. Repair services within 1 week at our plant in Balingen, transportation
or other peripheral devices.
Our catalogues and branch prospectuses are available in following Wall thickness ≤ 300 mm
costs are additional. Our expert Service technicians will be pleased 961-113 120,–
languages: DE, GB, FR, IT, ES The advantages of using KERN in-house calibration (ultra sound) (in stainless steel)
to assist you and will make sure that your device is quickly back in
Data interface Infrared: Motorised drive: operation. ·· Quick calibration: duration four working days only in laboratory
To transfer data from the The mechanical movement is For sets up to
961-170 Hardness Shore 95,–
measuring instrument to a carried out by a synchronous rice reduction on a new device: if repair costs are exceeding the
P ·· Competence: Calibration laboratory meets the highest metrological 7 plates
printer, PC or other peripheral motor (stepper).
devices. current value of the defective device, a new device will be offered at standards (in the field of mass)
a discount price. This offer is valid only up to 2 years after warranty 961-131 Hardness Leeb 400–800 HLD 120,–
Fast-Move:
·· Keeping recalibration calendar for your individual instrument
Control outputs expiration.
(optocoupler, digital I/O): the total length of travel can Test block
be covered by a single lever ·· Universal use: Calibration possible for variety of instruments 961-132 Hardness Leeb (for Leeb 120,–
to connect relays, signal lamps, Spare parts service within 48 hours, transportation costs are additional.
valves, etc. movement. of different manufacturers durometer)
961-270 Hardness UCI 200–800 HV 260,–
Analogue interface: DAkkS calibration possible: 961-150 Length ≤ 300 mm 120,–
to connect a suitable peripheral The time required for DAkkS Visit us our online shop: www.sauter.eu
961-190 Light ≤ 200.000 lx 165,–
device for analogue processing calibration is shown in days in Recalibration
of the measurements the pictogram.
Online-Shop Special offers Weight
·· Typical industrial recalibration times may be recommended 961-100 (Mechanical balances/ ≤ 5 kg 72,–
At your disposal round the clock. Delivery and Special offers, special models and
service via your specialist dealer. opportunities – something for everybody as follows: Spring balances)
Statistics: Factory calibration:
using the saved values, the The time required for factory and always up to date – just drop in! - daily use (once or several times): Recalibration times: 12 months Weight
device calculates statistical data, calibration is specified in the Measuring instruments Quick-Finde 961-101 (Mechanical balances/ > 5–50 kg 88,–
such as average value, standard pictogram. Find the product you want with the “Measuring - weekly use (or less frequent use): Recalibration times: 24 months Spring balances)
deviation etc. instruments Quick-Finder” in no time.
·· Recalibration prices: The prices for initial calibration and recalibration Express service:
One-Stop-Shopping manufacturer’s basic
PC Software: Package shipment:
to transfer the measurement data The time required for internal From force gauge to test stand – are identical (see the table shown here). Costs for cleaning or for 962-116 official verification with 50,–/device
from the device to a PC. shipping preparations is shown Calibration everything from one supplier. the production of special holders to carry out the calibration will be lead time of 48h (only at
in days in the pictogram. In our accredited DAkks calibration laboratories, calculated separately, if required. initial purchase)
we produce internationally recognised DAkkS and
Factory calibration certificates for balances and test Downloads
Printer: Pallet shipment: weights as well as measuring instruments. For each model there is an individual
a printer can be connected The time required for internal Note: For further calibration services please see www.sauter.eu
shipping preparations is shown brochure, user manual or pictures.
to the device to print out the
measurement data. in days in the pictogram.
Product group index 2018
01
Force measurement 4–30
· Accessories
02
Torque measurement 31–33
03
Length measurement 34–36
04
Coating thickness measurement 37–41
05
Material thickness measurement 42–48
06
Hardness testing of plastics (Shore) 49–52
07
Hardness testing of metals (Leeb) 53–57
08
Hardness testing of metals (UCI) 58–61
09
Occupational safety/Environment 62–66
Calibration service 67
3
Force measurement
Note: All standard force-measuring devices are available with a factory Irmgard Russo
calibration certificate as an option. All electronic force-measuring Product specialist Force measurement
devices with a measuring range of ≤ 5 kN are also available with a
DAkkS calibration certificate as an option. For details on our calibration Tel. +49 [0] 7433 9933 - 208
services, please see page 67 or visit our website www.sauter.eu Fax +49 [0] 7433 9933 - 29208
russo@kern-sohn.com
01
STANDARD OPTION
01
Features Accessories
·· Aluminium scale tube: robust, long service ·· High-quality workmanship: Wear-resistant, ·· Pressure-Set, suitable for models with
life, rustproof colour-anodised precision scale with high weighing range < 2,5 kg/25 N,
·· Gramme/Kilogram scale: Measuring result resolution for accurate readout of the measuring SAUTER 281-890, € 70,–
display in grammes or kilograms instead of N result ·· Pressure-Set, suitable for models with
·· Compressive force measurement: possible weighing range ≥ 5 kg/50 N,
using an optional pressure set, see accessories SAUTER 285-890, € 75,–
Technical data
·· Drag pointer and carrying handle: as standard ·· Clip, suitable for models with weighing
on all models of the SAUTER 285 range ·· Accuracy of: ± 0,3 % of the load range ≤ 2,5 kg/25 N,
·· Handrail: thanks to the rotating handrail the ·· Tare range: 20 % of [Max] SAUTER 281-151-002, € 6,–
scale can always be aligned to be at the very ·· Bird weighing cone, suitable for models
best line of sight with weighing range 50 g–500 g,
·· High precision: Zero-play spring bearing SAUTER 281-891, € 15,–
with integrated tare screw for highly-precise ·· Drag pointer for spring balances, suitable
adjustment for models with weighing range < 2,5 kg/25 N,
·· Non-fatigue stainless steel spring SAUTER 281-051-001, € 6,–
·· Clip loop which can be freely rotated of ·· Drag pointer for spring balances, suitable
the lower suspension bracket by 360° for for models with weighing range ≥ 5 kg/50 N,
models with [Max] ≤ 1 kg SAUTER 285-897, € 10,–
STANDARD OPTION
01
Features Accessories
·· Aluminium scale tube: robust, long service ·· Clip loop which can be freely rotated of ·· Pressure-Set, suitable for models with
life, rustproof the lower suspension bracket by 360° weighing range < 2,5 kg/25 N,
·· Newton scale: Measuring result display in ·· High-quality workmanship: Wear-resistant, SAUTER 281-890, € 70,–
Newton colour-anodised precision scale with high ·· Pressure-Set, suitable for models with
·· Compressive force measurement: possible resolution for accurate readout of the measuring weighing range ≥ 5 kg/50 N,
using an optional pressure set, see accessories result SAUTER 285-890, € 75,–
·· Carrying handle as standard ·· Clip, suitable for models with weighing
·· Drag pointer as standard on all models of range ≤ 2,5 kg/25 N,
Technical data
the SAUTER 283 range with [Max] ≥ 50 N SAUTER 281-151-002, € 6,–
·· Handrail: thanks to the rotating handrail the ·· Accuracy of: ± 0,3 % of the load ·· Drag pointer for spring balances, suitable
scale can always be aligned to be at the very ·· Tare range: 20 % of [Max] for models with weighing range < 2,5 kg/25 N,
best line of sight, on all models of the SAUTER SAUTER 281-051-001, € 6,–
283 range with [Max] ≥ 50 N ·· Drag pointer for spring balances, suitable
·· High precision: Zero-play spring bearing for models with weighing range ≥ 5 kg/50 N,
with integrated tare screw for highly-precise SAUTER 285-897, € 10,–
adjustment
·· Non-fatigue stainless steel spring
STANDARD OPTION
01
STANDARD OPTION
01
STANDARD OPTION
01
Features Accessories
·· Turnable display with backlight ·· Data interface RS-232 standard, only for ·· Force-time data transfer software for
·· Peak-Hold function to capture peaks connection to the printer graphical representation on the PC and
(measurement result will be “frozen” for a ·· Selectable: AUTO-OFF function or permanent data transfer to Microsoft Excel®,
short time) or Track function mode for a operation SAUTER AFH FAST, € 115,–
continuous measurement indication (period ·· Delivered in a robust carrying case ·· Force-displacement data transfer software
of time approx. 10 s) ·· Selectable measuring units: N, kg, oz, lb with graphic display of the measurement
·· Metal housing for durable use in harsh ·· Standard attachments: as shown below process, SAUTER AFH FD, € 650,–
environmental conditions ·· Can be mounted on all SAUTER test stands ·· Plug-In for data transfer of measuring
·· Capacity display: A bar lights up to show data from the measuring instrument and
how much of the measuring range is still transfer to a PC, e.g. in Microsoft Excel®,
Technical data
available SAUTER AFI-1.0, € 90,–
·· Measuring with tolerance range ·· Precision: 0,2 % of [Max] ·· Standard attachments,
(limit-setting function): Upper and lower ·· Internal measuring frequency: 1000 Hz SAUTER AC 43, € 45,–
limiting can be programmed between 10 ·· Overload protection: 150 % of [Max] ·· Matrix needle printer KERN YKN-01N, € 230,–
and 100% of MAX, in pull and push direction. ·· Overall dimensions W×D×H 145×73×34 mm ·· Thermal printer, KERN YKB-01N, € 290,–
The process is supported by an acoustic and ·· Thread: M6 ·· Statistics thermal printer,
visual signal. ·· Net weight approx. 0,94 kg KERN YKS-01, € 390,–
·· Safety: If loads exceed 110 % of the measuring ·· Permissible ambient temperature ·· Label printer, KERN YKE-01, € 590,–
range, the device will give clear acoustic and -10 °C/40 °C ·· Further accessory see www.sauter.eu and
visual signals page 25 et seqq.
·· Internal memory for up to 500 measurement
values
·· Data interface USB standard
STANDARD OPTION
s. p. 67
01
s. p. 67
01
FH 50K.:
·· Dimensions load cell W×D×H
108×76,3×25,5 mm
·· Thread: M18
FH 100K.:
Universal digital force gauges for tension and compression ·· Dimensions load cell W×D×H
178×152,2×51,3 mm
tests with external measuring cell and RS-232 data interface ·· Thread: M30
STANDARD OPTION
s. p. 67
Model Measuring range Readout Price Option DAkkS calibration certificate (≤ 5 kN)/Factory calibration certificate
excl. of VAT Tensile force Compressive force Tensile/Compressive force
[Max] [d] ex works
SAUTER kN N € KERN € KERN € KERN €
FH 1K. 1 0,5 730,– 963-162 165,– 963-262 165,– 963-362 300,–
FH 2K. 2 1 730,– 963-162 165,– 963-262 165,– 963-362 300,–
FH 5K. 5 1 940,– 963-163 225,– 963-263 225,– 963-363 405,–
FH 10K. 10 5 1100,– 961-164 350,– – – – –
FH 20K. 20 10 1110,– 961-164 350,– – – – –
FH 50K. 50 10 1290,– 961-165 520,– – – – –
FH 100K. 100 50 1550,– 961-166 940,– – – – –
01
Features Accessories
·· Turnable display with backlight ·· Delivered in a robust carrying case ·· Plug-In for data transfer of measuring
·· Peak-Hold function to capture peaks ·· SAUTER FL 2K: with external sensor, data from the measuring instrument and
(measurement result will be “frozen” for a Tension loops and pressure plates are transfer to a PC, e.g. in Microsoft Excel®,
short time) or Track function mode for a included in delivery SAUTER AFI-1.0, € 90,–
continuous measurement indication (period ·· Standard attachments: as shown above ·· Force-time data transfer software for
of time approx. 10 s) (not for FL 2K) graphical representation on the PC and
·· Metal housing for durable usage in harsh ·· Selectable measuring units: N, kN, kg, oz, lbf data transfer to Microsoft Excel®,
environmental conditions SAUTER AFH FAST, € 115,–
·· Can be mounted on all SAUTER test stands ·· Force-displacement data transfer software
Technical data
·· Capacity display: A bar lights up to show with graphical reprensentation of the meas-
how much of the measuring range is still ·· Internal measuring frequency: 1000 Hz urement process, SAUTER AFH FD, € 650,–
available ·· Precision: 0,2 % of [Max] ·· USB cable, SAUTER FL-A01, € 49,–
·· Measuring with tolerance range ·· Overload protection: 120 % of [Max] ·· RS-232 adapter cable,SAUTER FL-A04, € 49,–
(limit-setting function): Upper and lower ·· Dimensions W×D×H 175×75×30 mm ·· Thermal printer, KERN YKB-01N, € 290,–
limiting can be programmed individually, in ·· Thread: M6 ·· Statistics thermal printer,
pull and push direction. The process is ·· Dimensions load cell W×D×H 76,2×51×19 mm KERN YKS-01, € 390,–
supported by an audible and visual signal. ·· Thread: M12 ·· Label printer, KERN YKE-01, € 590,–
·· Internal memory for up to 500 measurement ·· Rechargeable battery pack integrated, ·· Supports for fastening of objects as well as
values standard, operating time up to 10 h without additional accessories, please see page 25
·· Continuous analogue output: Linear voltage backlight, charging time approx. 8 h onwards or www.sauter.eu
signal in dependence to the load (-2 to +2V ) ·· Net weight approx. 0,5 kg
STANDARD OPTION
s. p. 67
01
STANDARD
01
TVP-L.:
·· Digital length meter
-- Measuring range: 100 mm
-- Readout: 0,01 mm
-- Zero setting possible
-- Pre-length can be set manually
STANDARD
TVP-L.
01
THM 500N500S
Features Accessories
·· New: Step motor for greatest ease of use ·· Figure shows the premium operating panel ·· Digital length measuring device, measuring
only at THM 500N500S of SAUTER THM 500N500N range 200 mm, readout 0,01 mm, details see
-- for constant speed from the smallest to ·· Solid and versatile fixing options of page 35, SAUTER LB 200-2., € 1050,–
the maximum load SAUTER force measuring devices, see ·· Mounting the length measuring device
-- allows testing at minimum speed and full accessory page 25 et seqq. onto a SAUTER test stand at the factory,
load ·· Suitable for all SAUTER force measuring SAUTER LB-A02, € 190,–
-- for higher positioning accuracy. Precise devices up to 500 N (not supplied with the ·· Linear potentiometer for length measure-
starting and stopping, without follow-up product) ment, measuring range: 300 mm,
movement, even at high speeds readout: 0.01 mm, for details see page 36,
-- precise adjustment of the process speed SAUTER LD, from € 590,–
Technical data
using the information shown on the display ·· Mounting the length measuring device
·· Easy to use onto a SAUTER test stand at the factory,
THM-N:
·· Efficient working SAUTER LD-A06, € 260,–
·· Minimum distance between left and right
·· Robust design and heavy duty metal ·· Force-displacement data transfer software
object fastening: 30 mm
construction with graphical representation of the measuring
·· Maximum travel length: 220 mm
·· Linear adjustable jaw vice process, only in combination with SAUTER LD,
(protected by electronic end switches)
The clamping vice can be locked and finely SAUTER AFH LD, € 250,–
·· Overall dimensions W×D×H 170×345×550 mm
adjusted sidewards and up/down using the ·· Force-time data transfer software for
·· Net weight approx. 35 kg
setting wheel. graphical representation on the PC and
·· Repeat function for fatigue tests data transfer to Microsoft Excel®,
THM-S:
·· Digital speed display to read the process SAUTER AFH FAST, € 115,–
·· Maximum travel length: 240 mm (protected
speed straightaway ·· Force-displacement data transfer software
by electronic end switches)
·· Premium operating panel: with graphic display of the measurement
·· Overall dimensions W×D×H 695×235×300 mm
-- Digital speed display process, SAUTER AFH FD, € 650,–
·· Net weight approx. 48 kg
-- Digital repeat function display ·· Data transfer software for repeat tests,
-- Control of the test stand using SAUTER AFH FGT, € 850,–
PC software SAUTER AFH
STANDARD OPTION
THM THM-S
01
STANDARD OPTION
01
B
SAUTER TVO 1000N500S
Features Accessories
·· Motorised test stand for tension/compression ·· Robust construction ·· Digital length measuring device SAUTER LB,
force testing ·· Fixation of SAUTER force measuring devices only for TVO 500N300S and TVO 500N300,
·· New: Step motor for greatest ease of use up to 2 kN possible SAUTER LB 300-2., € 1150,–
-- for constant speed from the smallest to the ·· Solid and flexible possibilites of fixation ·· Mounting the length measuring device
maximum load of mouns for test objects, see accessory onto a SAUTER test stand at the factory,
-- allows testing at minimum speed and full load page 25 et seqq. SAUTER LB-A02, € 190,–
-- for higher positioning accuracy. Precise ·· The large diagram shows the TVO 1000N500S ·· Linear potentiometer for length measure-
starting and stopping, without overrun, test stand with: SAUTER FH force measuring ment, measuring range: 225, 300, 500 or
even at high speeds device, length measuring device SAUTER LD 700 mm, readout: 0.01 mm, for details see
-- precise adjustment of the process speed as well as mounts for the force measuring page 36, SAUTER LD, from € 590,–
using the information shown on the display device and test objects, not supplied with ·· Mounting the length measuring device
·· A wide range of application possibilities the product onto a SAUTER test stand at the factory,
because of its large travelling distance SAUTER LD-A06, € 260,–
·· Automatic or manual process mode ·· Force-displacement data transfer software
Technical data
·· Premium operating panel with graphical representation of the measuring
-- Digital speed display ·· Speed accuracy: 1 % of [Max] process, only in combination with SAUTER LD,
-- Digital repeat function ·· Positioning accuracy when shutting down: SAUTER AFH LD, € 250,–
-- Control of the test stand using ± 0,05 mm ·· Force-time data transfer software for
PC software SAUTER AFH ·· Dimensional drawings see instruction manual graphical representation on the PC and
·· Table-top version for easy operation on www.sauter.eu data transfer to Microsoft Excel®,
SAUTER AFH FAST, € 115,–
·· Force-displacement data transfer software
with graphic display of the measurement
process, SAUTER AFH FD, € 650,–
·· Data transfer software for repeat tests,
SAUTER AFH FGT, € 850,–
·· Mount for force measuring devices of
STANDARD OPTION the SAUTER FH range with external load cell,
SAUTER TVO-A01, € 65,–
01
Test stand with electric motor for standard measurements ·· For dimensional drawing see operating instruc-
tions on www.sauter.eu/en/TVM-N/...TVM-NL
– now with longer guide columns ·· Net weight on request
Features Accessories
·· Premium operating panel -- Direct installation of the load cell for ·· Linear potentiometer for length measure-
-- Digital speed display measuring devices with external load cell ment, measuring range: 225, 300, 500 or
-- Digital repeat function with a measuring range starting from 700 mm, readout: 0.01 mm, for details see
-- Control of the test stand using 1,000 N page 36, SAUTER LD, from € 590,–
PC software SAUTER AFH -- Direct installation of the external ·· Mounting the length measuring device
·· Force controlled automatic switchoff, Teststop load cell on the cross beam (only onto a SAUTER test stand at the factory,
after achieving an adjusted limit load, only in for TVM-N. ≥ 20 kN SAUTER LD-A06, € 260,–
combination with a SAUTER FH force gauge -- Mount for force-measuring devices ·· Length measuring device SAUTER LB,
·· Repeat function for long-term loading tests from the SAUTER FH range with external SAUTER LB 300-2., € 1150,–
·· Digital speed display to read the travelling measuring cell ·· Mounting the length measuring device
speed straightaway ·· The large figure shows the TVM-N test stand onto a SAUTER test stand at the factory,
·· Maximum travel distance protected by with: SAUTER FH force measuring device, SAUTER LB-A02, € 190,–
electronic end switches SAUTER LD length measuring device, longer ·· Force-displacement data transfer software
·· SAUTER LA length measuring device as guide columns as well as mount for force with graphical representation of the measuring
standard, to read the travel distance with a measuring device and test objects, not process, only in combination with SAUTER LD,
readout of 0.01 mm supplied with the product SAUTER AFH LD, € 250,–
·· Solid and versatile fixing options of mounts ·· Force-displacement data transfer software
for test objects, see accessory page 25 et seqq. with graphic display of the measurement
Technical data
·· Particularly flexible installation options for process, SAUTER AFH FD, € 650,–
the most variable force measuring devices, ·· Speed accuracy: 3 % of [Max] ·· Mount for force measuring devices from
such as, SAUTER FH, FA, FK, FL: ·· Initial height of the mounting plate from the the SAUTER FH range with external load cell,
-- Direct installation of measuring devices upper edge of the motor housing: 171 mm SAUTER TVM-A01, € 65,–
with internal load cell up to a measuring ·· Maximum stroke of the mounting plate: 385 mm ·· Longer columns with the same travel
range of 500 N (only with TVM 5000N230N. ·· Minimal distance between mounting plate and distance, up to 500 mm,
and TVM 10KN120N.) underside of the upper device mounting: 85 mm SAUTER AFH 18, € 560,–
STANDARD OPTION ·· Overall dimensions W×D×H
410×255×1550 mm
Model Measuring range Speed range Length of columns Max. travelling Price
distance excl. of VAT
[Max] ex works
SAUTER N mm/min mm mm €
TVM 5000N230N. 5000 10–230 635 210 1910,–
TVM 5000N230NL 5000 10–230 1135 210 2050,–
TVM 10KN120N. 10000 30–120 1135 210 2600,–
TVM 20KN120N. 20000 30–120 1135 210 3390,–
TVM 30KN70N. 30000 5–70 1135 210 4000,–
01
Features Accessories
·· Motorised test stand for tension/compression ·· The large figure shows the TVS test stand ·· Linear potentiometer for length measure-
force testing with: SAUTER FH force measuring device, ment, measuring range: 225, 300, 500 or
·· Premium operating panel SAUTER LD length measuring device, 700 mm, readout: 0.01 mm, for details see
-- Digital speed display longer guide columns as well as mount for page 36, SAUTER LD, from € 590,–
-- Digital repeat function force measuring device and test objects, ·· Mounting the length measuring device
-- Control of the test stand using not supplied with the product onto a SAUTER test stand at the factory,
PC software SAUTER AFH ·· For force-displacement testing: Please order SAUTER LD-A06, € 260,–
·· New: Step motor for greatest ease of use the optional SAUTER LB length measuring ·· Length measuring device SAUTER LB,
-- for constant speed from the smallest to device and software AFH FD or SAUTER LD SAUTER LB 300-2., € 1150,–
the maximum load length measuring device and software AFH ·· Mounting the length measuring device
-- allows testing at minimum speed and full LD as well as the factory fitting of the length onto a SAUTER test stand at the factory,
load measuring device with the product SAUTER LB-A02, € 190,–
-- for higher positioning accuracy. Precise ·· Force-displacement data transfer software
starting and stopping, without follow-up with graphical representation of the measuring
Technical data
movement, even at high speeds process, only in combination with SAUTER LD,
-- precise adjustment of the process speed ·· Speed accuracy: 1 % of [Max] SAUTER AFH LD, € 250,–
with indication on the display ·· Positioning accuracy when shutting down: ·· Force-displacement data transfer software
·· Maximum travelling distance protected by ± 0,05 mm with graphic display of the measurement
electronic end switches ·· Initial height of the mounting plate from the process, SAUTER AFH FD, € 650,–
·· Large working area by means of long guide upper edge of the motor housing: 171 mm ·· Mount for force measuring devices from
columns as standard, which allows a wide ·· Maximum stroke of the mounting plate: 385 mm the SAUTER FH range with external load cell,
range of fixing options ·· Minimal distance between the mounting SAUTER TVM-A01, € 65,–
·· SAUTER LA length measuring device as plate and the underside of the upper device ·· Longer columns with the same travel
standard, to read the measurement range mounting: 85 mm distance, up to 500 mm,
with a readout of 0.01 mm ·· Overall dimensions W×D×H 410×255×1550 mm SAUTER AFH 18, € 560,–
STANDARD OPTION ·· For dimensional drawing see the operating
instructions on www.sauter.eu/en/TVS
·· Net weight on request
Model Measuring range Speed range Max. travelling Length of columns Price
distance excl. of VAT
[Max] ex works
SAUTER N mm/min mm mm €
TVS 5000N240 5000 1–240 215 1135 3550,–
TVS 10KN100 10000 1–200 215 1135 4450,–
TVS 20KN100 20000 1–70 215 1135 4650,–
TVS 30KN80 30000 1–70 215 1135 4950,–
TVS 50KN80 50000 1–70 215 1135 6550,–
01
STANDARD OPTION
Model Measuring range Readout Net weight Price Option Factory calibration
excl. of VAT certificates compression
[Max] [d] ex works
SAUTER N N kg € KERN €
SD 50N100. 50 0,01 21 1950,– 961-261O 135,–
SD 100N100. 100 0,02 21 1950,– 961-261O 135,–
SD 200N100. 200 0,05 21 1950,– 961-261O 135,–
SD 300N100.* 300 0,1 21 1950,– 961-261O 135,–
SD 500N100. 500 0,1 21 1950,– 961-261O 135,–
*ONLY WHILE STOCKS LAST!
www.sauter.eu · Order hotline +49 [0] 7433 9933 - 0 Force measurement 21
Data transfer software SAUTER AFH FAST
01
STANDARD
Model Price
excl. of VAT
ex works
SAUTER €
AFH FAST 115,–
01
Model Price
excl. of VAT
ex works
SAUTER €
AFH FD 650,–
AFH LD 250,–
New model
www.sauter.eu · Order hotline +49 [0] 7433 9933 - 0 Force measurement 23
Data transfer software SAUTER AFI-1.0
01
STANDARD
Model Price
excl. of VAT
ex works
SAUTER €
AFI-1.0 90,–
Price reduction
26 Force measurement accessories All prices listed here are without german legal VAT (19%)
For tension tests > 5000 N For compression tests > 500 N
Belt tension clamp AD 9255 Stainless steel ball-shaped head AC 02 01
up to 20 kN, € 1800,– for compression and fracture tests € 55,–
suitable for tensile force tests with 2 pieces up to 5 kN, (e.g. foam, glass), 2 pieces
belts or any other soft, flexible, flat Thread: M6/M10
materials with a maximum sample
thickness of 2,5 mm a test object
width up to 80 mm Small 3-point bending device (steel) AD 9300
up to 10 kN, € 1530,–
central scale 80-0-80 mm.
Belt tension clamp AD 9256 Consisting of one support beam, two
up to 50 kN, € 3060,– support brackets and a curved fin each
suitable for tensile force tests with 2 pieces with permanently fixed radii, radius of
belts or any other soft, flexible, flat the fin 3,2 mm, radii of the support brackets
materials with a maximum sample 3,2 + 5 mm, other radii on request.
thickness of 2,5 mm a test object Gap between the two support brackets
width up to 80 mm 4–150 mm. Width of the brackets 30 mm
Pressure disc AC 08
for compression tests up to 5 kN € 55,–
(e. g. plastics), ∅ 49 mm, 2 pieces
inner thread: M10
All prices listed here are without german legal VAT (19%) Force measurement accessories 27
Dynamometer clamp SAUTER AE 2K
01
STANDARD
01
STANDARD
The SAUTER range has just one static torque device for determining
the force expended when opening rotary or screw caps of bottles.
Quick-Finder
Measuring Readout Model Price Page
range excl. VAT,
[Max] [d] ex works
Nm Nm SAUTER €
0.5 0,0001 DB 0.5-4 1590,– 33
1 0,0002 DB 1-4 1590,– 33
1 0,0002 DA 1-4 1790,– 32
5 0,001 DB 5-3 1590,– 33
5 0,001 DA 5-3 1890,– 32
10 0,002 DB 10-3 1590,– 33
Irmgard Russo
10 0,002 DA 10-3 1890,– 32
Product specialist Torque measurement 20 0,005 DB 20-3 1790,– 33
50 0,01 DB 50-2 1790,– 33
Tel. +49 [0] 7433 9933 - 208 100 0,02 DB 100-2 1790,– 33
Fax +49 [0] 7433 9933 - 29208 200 0,05 DB 200-2 1790,– 33
russo@kern-sohn.com 500 0,05 DA 500-2 1790,– 33
31
Digital torquemeter SAUTER DA
02
02
Technical data
Convenient way to test the torque of tools ·· Backlit LCD graphics display
·· Units can be selected:
Nm, lbf-in, kgf-cm, kgf-m, ft-lbf
·· Precision: ± 0,5 % of [Max]
·· Measuring frequency: 1000 Hz
Features
·· Usable measuring range:
·· Particularly suitable for testing torque ·· Internal data memory saves up to 500 5–100 % of [Max]
wrenches, electric hand screwdrivers and measurements. The memory contents can ·· Overload protection: 150 % of [Max]
cordless screwdrivers be transferred to the PC using optional ·· Rechargeable battery pack integrated,
·· Torque pick-up system for dynamic software standard, operating time up to 18 h without
testing of electric screwdrivers ·· Peak hold function to capture the peak backlight, charging time approx. 14 h
·· Metal housing for continuous use in tough value or Track-Funktion for continuous ·· Overall dimensions W×D×H 200×100×50 mm
environmental conditions display of measurement ·· Net weight approx. 3 kg
·· Capacity display: A bar lights up to show ·· Can be used in both directions of rotation
how much of the measuring range is still ·· Measuring with tolerance range
Accessories
available. (limit-setting function): Upper and lower
·· LCD graphics display with backlight limiting can be programmed individually. ·· Plug-In for data transfer of measuring
·· Rubber feet with anti-slip feature at The process is supported by an audible and data from the measuring instrument and
SAUTER DB 0.5-4 up to DB 10-3 visual signal transfer to a PC, e.g. in Microsoft Excel®,
·· Stable mounting plate for solid fixation ·· AUTO-OFF function SAUTER AFI-1.0, € 90,–
at SAUTER DB 20-3 up to DB 500-2 ·· Force-time data transfer software for
·· USB and RS-232 data interfaces included graphical representation on the PC and
·· Scope of delivery: Torque pick-up, sturdy data transfer to Microsoft Excel®,
carry case, mounting plate (models with SAUTER AFH FAST, € 115,–
[Max] ≥ 20 Nm) ·· RS-232/PC connection cable
SAUTER FL-A04, € 49,–
·· USB/PC connection cable
SAUTER FL-A01, € 49,–
STANDARD OPTION
Quick-Finder
Readout Measuring Model Price Page
range excl. VAT,
[d] [Max] ex works
mm mm SAUTER €
0,01 200 LB 200-2. 1050,– 35
0,01 225 LD 225 590,– 36
0,01 300 LB 300-2. 1150,– 35
0,01 300 LD 300 630,– 36
0,01 500 LB 500-2. 1250,– 35
0,01 500 LD 500 790,– 36
0,01 700 LD 700 850,– 36
34
Digital length measuring device SAUTER LB
03
STANDARD OPTION
03
STANDARD
37
Digital coating thickness gauge SAUTER TB
04
STANDARD OPTION
04
STANDARD OPTION
TC 1250-0.1FN-CAR. 100 | 1250 0,1 | 1 Combination instrument: F/N 470,– 961-112 170,–
04
STANDARD OPTION
SAUTER TF SAUTER TG
04
SAUTER TG:
·· External sensor for difficult-to-access
measuring points
STANDARD OPTION
F: Convex: 1,5
TF 1250-0.1FN. 100 | 1250 0,1 | 1 Combination instrument: F/N Concave: 25 530,– 961-112 170,–
N: Convex: 3
TG 1250-0.1FN. 100 | 1250 0,1 | 1 Combination instrument: F/N
Concave: 50 530,– 961-112 170,–
In this way the wall thickness of, for example, ship’s hulls, pipes,
tanks and components in sites or machines can be determined.
Quick-Finder
Readout Measuring Model Price Page
range excl. VAT,
[d] [Max] ex works
mm mm SAUTER €
0,01 0,75–80 TN-GOLD 80 690,– 45
0,01 30 TN 30-0.01EE 890,– 47
0,01 60 TN 60-0.01EE 1200,– 47
0,01 80 TU 80-0.01US. 1170,– 48
0,01 80 TN 80-0.01US. 620,– 46
0,01 | 0,1 230 TU 230-0.01US. 1170,– 48
0,01 | 0,1 300 TU 300-0.01US. 1260,– 48
Taras Mikitisin 0,01 | 0,1 230 TN 230-0.01US. 620,– 46
0,01 | 0,1 300 TN 300-0.01US. 710,– 46
Product specialist
0,1 80 TN 80-0.1US. 560,– 46
Material thickness measurement 0,1 200 TB 200-0.1US. 320,– 43
0,1 200 TB 200-0.1US-RED. 270,– 43
Tel. +49 [0] 7433 9933 - 143 0,1 225 TD 225-0.1US. 370,– 44
Fax +49 [0] 7433 9933 - 29143 0,1 230 TN 230-0.1US. 560,– 46
mikitisin@kern-sohn.com 0,1 300 TN 300-0.1US. 660,– 46
42
Ultrasonic thickness gauge SAUTER TB-US
STANDARD OPTION
05
Features Technical data Accessories
·· External sensor for difficult-to-access ·· Precision: 0,5 % of [Max] + 0,1 mm ·· Software, interface cable included,
measuring points ·· Dimensions W×D×H 120×65×30 mm SAUTER ATD-01, € 90,–
·· Data interface RS-232 included ·· Battery operation, batteries standard ·· External sensor, 5 MHz, ∅ 6 mm, for thin
·· Base plate for adjustment incorporated 4× 1.5V AAA, AUTO-OFF function to test materials: Measuring range (steel)
·· Delivered in a robust carrying case preserve batteries 1–50 mm, SAUTER ATB-US01, € 190,–
·· Selectable measuring units: mm, inch ·· Net weight approx. 0,164 kg ·· External sensor, 5 MHz, ∅ 12 mm, for hot
test materials: Measuring range (steel)
1–225 mm at normal temperatures,
4–100 mm at temperatures of up to 300 °C,
SAUTER ATB-US02, € 295,–
·· External sensor, 5 MHz, ∅ 8 mm,
SAUTER ATB-US06, € 100,–
·· External sensor, 5 MHz, ∅ 10 mm,
SAUTER ATU-US09, € 110,–
·· External sensor, 5 MHz, ∅ 10 mm,
transducer at an angle of 90°,
SAUTER ATU-US10, € 110,–
·· Ultrasound contact gel, standard,
can be reordered, approx. 60 ml,
SAUTER ATB-US03, € 30,–
STANDARD OPTION
05
Features Technical data
·· You can use the TN-GOLD to determine ·· Using the SAUTER SSG software (included), ·· Precision: 0,5 % of [Max] ± 0,04 mm
whether gold or silver bars and coins are you can determine whether the test item is ·· Dimensions W×D×H 74×32×150 mm
genuine or whether they contain a core genuine or contains a false core – and you ·· Battery operation, batteries standard
of a different material can be very confident of the result 2× 1.5V AA, AUTO-OFF function to
·· The instrument measures the thickness of ·· Known additions in tested gold items – e.g. preserve the batteries
gold bars and gold coins using ultrasound copper or silver – are compensated by the ·· Net weight approx. 245 g
·· Process: Ultrasound waves are directed software
onto the test object using a sensor. The ·· In addition, the software determines the
Accessories
waves penetrate the test object, are then value of the gold item. The price of gold is
reflected from a surface opposite the object polled on line continuously ·· External sensor, 5 MHz, ∅ 6 mm,
and then picked up again by the sensor. The ·· It is the only test process which measures SAUTER ATB-US01, € 190,–
measurement determined by this process right through the whole bar or the whole coin ·· Ultrasound contact gel, standard,
will be compared with the material thickness without interference and thereby guarantees can be reordered, approx. 60 ml,
as measured by a traditional calliper gauge. the highest level of certainty SAUTER ATB-US03, € 30,–
On the basis of the measurement given, ·· Internal memory for up to 20 files (with up ·· Plug-In for data transfer of measuring
false cores (Figure: grey) for example, those to 100 values per file) data from the measuring instrument and
made of tungsten, lead, etc. can be easily ·· Base plate for adjustment incorporated transfer to a PC, e.g. in Microsoft Excel®,
identified, as the ultrasound reacts differently, ·· Data interface USB, standard SAUTER AFI-1.0, € 90,–
compared with pure gold ·· Delivered in a robust carrying case ·· External sensor, 7 MHz, ∅ 6 mm, for thin test
·· Selectable measuring units: mm, inch materials: Measuring range 0,75–80 mm (steel),
SAUTER ATU-US02, € 110,–
STANDARD OPTION
STANDARD OPTION
Model Measuring range Measuring range Readout Sensor Sound velocity Price Option
Echo-echo Plus-Echo excl. of VAT Factory calibration certificates
[d] ex works
SAUTER mm mm mm m/sec € KERN €
TN 30-0.01EE 3 - 30 0,65 - 600 0,01 5 MHz | ∅ 12 mm 1000–9999 890,– 961-113 120,–
TN 60-0.01EE 3 - 60 0,65 - 600 0,01 5 MHz | ∅ 12 mm 1000–9999 1200,– 961-113 120,–
Price reduction
www.sauter.eu · Order hotline +49 [0] 7433 9933 - 0 Material thickness measurement 47
Ultrasonic thickness gauge SAUTER TU-US
STANDARD OPTION
Currently, there are two types of devices used for this test: Mechanical
measuring devices with drag indicator and electronic measuring devices.
Both types of measuring devices can be operated with test stands (such
as the SAUTER TI series). With a test stand, measurements can be
carried out more consistently and accurately.
At this time, KERN does not calibrate Shore hardness testing instruments.
As an alternative, we recommend that the measuring device is operated
with a calibrated kit of test plates (such as SAUTER AHBA 01).
Quick-Finder
Readout Measuring Hardness Model Price Page
range type excl. VAT,
[d] [Max] ex works
HS HS SAUTER €
1,0 HA 100 HA A HBA 100-0. 105,– 50
1,0 HA0 100 HA0 A0 HB0 100-0. 135,– 50
Taras Mikitisin 1,0 HD 100 HD D HBD 100-0. 140,– 50
0,1 HA 100 HA A HDA 100-1. 375,– 51
Product specialist
0,1 H0 100 H0 A0 HD0 100-1. 375,– 51
Hardness testing of plastics 0,1 HD 100 HD D HDD 100-1. 375,– 51
– – A0 TI-AC. 240,– 52
Tel. +49 [0] 7433 9933 - 143 – – D TI-D. 300,– 52
Fax +49 [0] 7433 9933 - 29143 – – A0 TI-ACL 270,– 52
mikitisin@kern-sohn.com – – D TI-DL 340,– 52
49
Analogue Shore hardness tester SAUTER HB
STANDARD
STANDARD OPTION
Lever operated test stand for hardness testing with base plate
made out of glass
STANDARD
Model Suitable for Length of column Poids de contrôle Net weight Price
approx. excl. of VAT
ex works
SAUTER mm kg €
TI-AC. HBA, HB0 245 1 4,5 240,–
TI-D. HBD 245 5 8,5 300,–
TI-ACL HDA, HD0 300 1 4,5 270,–
TI-DL HDD 300 5 8,5 340,–
Since 1978, a rebound test was used for the first time for mobile
measuring, in accordance with Dietmar Leeb. To do this, a standardised
impact body (such as SAUTER AHMO D01) is shot against the item to
be tested. The rebound of the impact body leads to a deformation of
the upper surface, which results in a loss of kinetic energy. This loss of
energy is determined by measuring the speed and herefrom the Leeb
hardness value (HL) is calculated.
These measuring devices can be used in any location. Usually they are
equipped with a large internal data memory, which allows to record
the measurements at goods receipt or in production.
Quick-Finder
Readout Sensor Model Price Page
excl. VAT,
[d] ex works
Taras Mikitisin HL SAUTER €
Product specialist
1 D HK-D. 1250,– 54
Hardness testing of metals 1 D HK-DB 1390,– 54
1 D HMM. 1190,– 55
Tel. +49 [0] 7433 9933 - 143 1 D HMO. 1770,– 57
Fax +49 [0] 7433 9933 - 29143 1 D HN-D. 1290,– 56
mikitisin@kern-sohn.com 1 D HMM-NP 950,– 55
New 2018
53
Mobile Leeb hardness tester SAUTER HK-D · HK-DB
Accessories
·· Plug-In for data transfer of measuring
data from the measuring instrument and
transfer to a PC, e.g. in Microsoft Excel®,
Premium Durometer for hardness testing – now also with SAUTER AFI-1.0, € 90,–
·· Data transfer software, KERN SCD-4.0, € 150,–
hardness comparison block included ·· Support rings for secure positioning,
SAUTER AHMR 01, € 320,–
·· Impact body Type D, net weight approx. 5,5 g,
Features
hardness ≥ 1600 HV, tungsten carbide, Impact
·· Measures all metal samples ·· Measuring with tolerance range ball ∅ 3 mm, in accordance with the standard
(> 3 kg, thickness > 8 mm) (limit-setting function): Upper and lower ASTM A956-02, SAUTER AHMO D01, € 115,–
·· External impact sensor standard ( Type D) limiting can be programmed individually. ·· External impact sensor Type C. Low energy
·· Mobility: In comparison with stationary The process is supported by an audible and sensor: requires only 25 % impact energy
table-top devices and testing devices with visual signal. compared to type D, for testing tiny or light
an internal sensor, using the SAUTER HK-D. ·· Matrix display: Backlit multi-function objects or the surface of hardened layer,
offers the highest level of mobility and display for all relevant functions at a glance SAUTER AHMR C, € 640,–
flexibility ·· Robust metal housing ·· External impact sensor Type D,
·· All measurement directions possible (360°) SAUTER AHMR D, € 640,–
thanks to an automatic compensation function ·· External impact sensor Type D+15. Slim
Technical data
·· SAUTER HK-DB.: Hardness comparison front section for holes, grooves or re-entrant
block, hardness 760+/-30 HLD, included in ·· Precision: ± 1 % at 800 HLD surfaces, SAUTER AHMR D+15, € 290,–
delivery ·· Minimum sample radius (concave/convex): ·· External impact sensor Type DL, for very
07 ·· Delivered in a sturdy carrying case 50 mm (with support ring: 10 mm) narrow surfaces (∅ 4,5 mm),
·· Measurement value display: Rockwell ·· Minimum sample material thickness: 8 mm SAUTER AHMR DL, € 1590,–
( Type A, B, C), Vickers (HV ), Shore (HS), ·· The lowest weight of the test item on solid ·· External impact sensor Type G. High energy
Leeb (HL), Brinell (HB) support unit: 3 kg sensor: 900 % impact energy compared to
·· Internal memory for up to 600 data groups, ·· Dimensions W×D×H 132×82×31 mm type D, SAUTER AHMR G, € 1590,–
with up to 32 values per group forming the ·· Permissible ambient temperature -10 °C/40 °C ·· Connection cable SAUTER HMO-A04, € 95,–
average value of the group ·· Battery operation, batteries not standard ·· Test block Type D/DC, ∅ 90 mm (± 1 mm),
·· Mini statistics function: displays the 2× 1.5V AA, operating time up to 200 h net weight < 3 kg, hardness range
measured result, the average value, the ·· Net weight approx. 0,45 kg 790 ± 40 HL, SAUTER AHMO D02, € 190,–
impact direction, date and time 630 ± 40 HL, SAUTER AHMO D03, € 190,–
·· USB interface, included 530 ± 40 HL, SAUTER AHMO D04, € 190,–
·· Automatic unit conversion: The measuring ·· Factory calibration certificates for SAUTER
result is automatically converted into all AHMO D02, AHMO D03, AHMO D04,
specified hardness units SAUTER 961-132, € 120,–
STANDARD OPTION
HK-D
Features Accessories
·· Impact (rebound) sensor: The bounce ·· Measurement value display: Rockwell ·· Connection cable, without impact sensor,
module is accelerated by a spring against (B & C), Vickers (HV ), Brinell (HB), Shore SAUTER HMM-A02, € 105,–
the item being tested. Depending on how (HSD), Leeb (HL), tensile strength (MPa) ·· Attachment rings for secure positioning,
hard the object is, the kinetic energy of the ·· Automatic unit conversion: The measuring SAUTER AHMR 01, € 320,–
module will be absorbed. The speed reduction result is automatically converted into all ·· Impact body, SAUTER AHMO D01, € 115,–
will be measured and converted specified hardness units ·· Test block Type D/DC, ∅ 90 mm (± 1 mm),
to Leeb hardness values. net weight < 3 kg, hardness range
·· External impact sensor ( Type D) included 790 ± 40 HL, SAUTER AHMO D02, € 190,–
Technical data
·· Mobility: In comparison with stationary 630 ± 40 HL, SAUTER AHMO D03, € 190,–
table-top devices and testing devices with an ·· Precision: 1 % at 800 HLD (± 6 HLD) 530 ± 40 HL, SAUTER AHMO D04, € 190,–
internal sensor, using the SAUTER HMM. offers ·· Measuring range tensile strength: ·· SAUTER HMM.: Wireless IR printer
the highest level of mobility and flexibility 375–2639 MPa (steel) standard for o´site printing of measurement
·· All measurement directions possible (360°) ·· Min. sample weight on a solid and stable protocols (rechargeable battery operated),
07
thanks to an automatic compensation function support: 3 kg can be reordered, SAUTER AHN-02, € 340,–
·· Standard block for calibration included ·· Minimum sample material thickness: 8 mm ·· Paper roll, 1 piece, for SAUTER AHN-02,
(approx. 790 ± 40 HL) ·· Minimum sample radius (concave/convex): SAUTER ATU-US11, € 15,–
·· Delivered in a robust carrying case 50 mm (with support ring: 10 mm)
·· Internal memory for up to 9 data groups, ·· Dimensions W×D×H 80×30×150 mm
with up to 9 values per group forming the ·· SAUTER HMM.: External mains adaptor for
average value of the group printer, as standard
·· Mini statistics function: displays the ·· Ready for use: Batteries included, 3× 1.5V
measured result, the average value, the AAA, block, operating time up to 30 h,
impact direction, date and time AUTO-OFF function to preserve battery life,
·· New: SAUTER HMM-NP! This model has Battery charge indicator
identical product features as the SAUTER ·· Net weight approx. 0,2 kg
HMM. model, but comes without the wire-
less infrared printer.
STANDARD OPTION
STANDARD OPTION
STANDARD OPTION
Accessories
·· External impact sensor Type D, Leeb standard ·· Test stand for repeatable movements
sensor, as standard, can be reordered at any during testing. In this way you can avoid
time, SAUTER AHMO D, € 340,– errors which could occur with manual
·· Support ring, flat, handling of the sensor. This ensures even
SAUTER HO-A04, € 390,– more stable measurements and more
·· Support ring, small cylinder, precise measuring results. Smooth-running
SAUTER HO-A05, € 450,– mechanical system, stroke length 34 mm,
·· Support ring, large cylinder, maximum height of the test object within the
SAUTER HO-A06, € 450,– test bench 240 mm, swivel probe device for
·· Deep-hole protective cover, measurements outside the base plate, very
SAUTER HO-A07, € 230,– robust construction, net weight approx. 9 kg,
·· Calibration and adjustment plate SAUTER HO-A08, € 1550,–
(hardness test blocks) with defined and
tested steel hardness for regular testing and
adjustment of hardness testing devices. The
hardness values are indicated. A key feature of
the plates is the low-granular, homogenous
finish of the steel, ∅ 90 mm, including
08 calibration certificate, each, € 395,–
28 to 35 HRC: SAUTER HO-A09
38 to 43 HRC: SAUTER HO-A10
48 to 53 HRC: SAUTER HO-A11
58 to 63 HRC: SAUTER HO-A12
STANDARD OPTION
Model Hardness scale Min. weight of test item Min. thickness of test item Price Option
excl. of VAT Factory calibration certificates
ex works
SAUTER € KERN €
HO 1K HV 1 300 2 4500,– 961-270 260,–
HO 2K HV 2 300 2 4500,– 961-270 260,–
HO 5K HV 5 300 2 4500,– 961-270 260,–
HO 10K HV10 300 2 4500,– 961-270 260,–
STANDARD OPTION
Model Hardness Test force Attachment Sensor length Min. weight of Min. thickness Price Option
scale ring test item of test item excl. of VAT Factory calibration certificates
∅ ex works
SAUTER N mm mm g mm € KERN €
HO 3M HV 0.3 3 46 198 300 2 8300,– 960-270 260,–
HO 5M HV 0.5 5 46 198 300 2 8300,– 960-270 260,–
HO 8M HV 0.8 8 46 198 300 2 8300,– 960-270 260,–
HO 10M HV 1 10 46 198 300 2 8300,– 960-270 260,–
For regular calibration, our pick-up and return service can be used,
which will save you a lot of efforts and expenses.
Quick-Finder
Readout Measuring range Model Price P.
excl. VAT,
Taras Mikitisin [d] [Max] ex works
Product specialist SAUTER €
Occupational safety/Environment 0,1|1|10|100 lx 200|2000|20000|200000 lx SO 200K. 85,– 63
0,1|1|10|100 lx 200|2000|20000|200000 lx SP 200K 95,– 64
Tel. +49 [0] 7433 9933 - 143 0,1 dB 130 dB SU 130. 110,– 65
Fax +49 [0] 7433 9933 - 29143 0,1 dB 134 dB SW 1000 1750,– 66
mikitisin@kern-sohn.com 0,1 dB 136 dB SW 2000 960,– 66
62
Light measuring instrument SAUTER SO
STANDARD OPTION 09
09
STANDARD OPTION
09
STANDARD OPTION