Professional Documents
Culture Documents
HM 350-4
HM 350-4
HM 350-4
HM 350 Eco V
HM 350 V
3
Instructions for use Instructions of order Sample spare part
ing order:
Important note: Please note the full identification For hydraulic hammer HM 350
This spare parts list contains no number of your HM 350 Eco V. 0371 0 HM 350 Eco V 0016
safety regulations and is merely This code can be found on the cyl
intended to assist in the ordering inder ( part no.2 ) HammerNo.
of spare parts. Determine the quantity of individ Hammertype
For information on operating, ual parts which are required and Cylinder dimension index
servicing or repairing the hammer, need to be ordered. CylinderNr.
the relevant operating manual The order must indicate the fol
must be consulted at all costs. lowing details:
Please observe the safety regu 4 Tensioning bolts
lations listed in the relevant oper H full identification code of the Part ident no. 3362 2655 41
ating manual. HM 350 Eco V
H required quantity
Atlas Copco Construction H part ident. no Important:
Tools GmbH H designation Please indicate the address to
which the parts should be sent
and the type of shipment required.
Working tools
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
ÂÂÂÂÂÂÂÂÂÂÂÂ
ÂÂÂÂÂÂÂ
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
ÂÂÂÂÂÂÂÂÂÂÂÂ
ÂÂÂÂÂÂÂ
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
ÂÂÂÂÂÂÂÂÂÂÂÂ
ÂÂÂÂÂÂÂ
Description Useful length Weight Part ident. no.
[ mm ] [ kg ]
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
ÂÂÂÂÂÂÂÂÂÂÂÂ
Standard designs:
ÂÂÂÂÂÂÂ
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
ÂÂÂÂÂÂÂÂÂÂÂÂ
ÂÂÂÂÂÂÂ
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
ÂÂÂÂÂÂÂÂÂÂÂÂ
ÂÂÂÂÂÂÂ
Ø 90
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
Moil point
ÂÂÂÂÂÂÂÂÂÂÂÂ
ÂÂÂÂÂÂÂ 450 38 3362 2655 65
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
ÂÂÂÂÂÂ
ÂÂÂÂÂÂÂÂÂÂÂÂ
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ ÂÂÂÂÂÂÂ
ÂÂÂÂÂÂ
ÂÂÂÂÂÂÂ
Flat chisel 450 39 3362 2684 45
cross−cut
Please note:
Working tools will be subject to wear in the normal course of operations.
4
Main dimensions and weight HM 350 Eco V
410 560
1213
240
360 25
260
260
40
22 100
450
90
320
480
Weight: . . . . . . . . . . . . . 420 kg
(as shown, without chisel and adapter)
5
Hydraulic hammer HM 350 Eco V
29
7
32
6
9 18
1
19
21
20
11
14
13
40
Tool
ident. no.
3
T
15
10 35 P CL
12 2
P
27 8
26
25 30
47
31
34 33
21
23
22 5
29 44
4 43
36
46 45 37 46
43
28
6
Spare parts list HM 350 Eco V
Part. Part ident. Qty. Designation
no. no.
Parts marked with K will be subject to wear in the normal course of operations.
When ordering spare parts please do not forget to state the tool ident. no.
7
Hydraulic hammer HM 350 V
202
102
104
114
150 200
103 100
105 105
115
202
107
201
106
8
Spare parts List for Hydraulic hammer HM 350 Eco V
Part no.. Part ident. Qty. Designation
no.
Parts marked with K will be subject to wear in the normal course of operations.
When ordering spare parts please do not forget to state the tool ident. no.
Note:
When a hammer box assembly is ordered, a loose CE nameplate is included in the consignment in accordance
with European CE legislation. The weight stated on the adhesive nameplate refers to the weight of the hydraulic
hammer plus hammer box (not including connector and tool).
After the hydraulic hammer and the hammer box have been assembled the CE nameplate should be attached
to rear of the hammer box (see Section 3 of the operating manual). Only then may the complete unit be used.
9
Manual lubricating
Spare parts list − connecting kit for HM 350 Eco V
Part No. Pt.Id.No. Quantity Designation
Parts marked with K will be subject to wear in the normal course of operations.
When ordering spare parts please do not forget to state the tool ident. no.
254
250
252
251
253
Important:
The grease line (part no. 253) must be laid in accordance with the diagram, ensuring that it can
be moved freely and does not make contact at any point.
10
Automatic lubricating
Spare parts list − connecting kit for ContiLube® II on HM 350 Eco V
Part No. Pt.Id.No. Quantity Designation
3363 0852 48 x Connection kit for ContiLube® II on HM 350 Eco V
03 3363 0673 33 1 Adapter plate
04 3363 0673 29 2 Welding sheet
05 3360 0265 11 4 Cylindrical bolt
06 3360 1037 51 4 Cylindrical bolt
07 3361 8505 96 8 Pair of locking rings
10 3363 0662 33 4 Fitting
11 K 3363 0838 75 2 Hose
12 3362 2698 59 1 Adapter
13 3362 3281 38 1 Nut
20 3363 0662 34 2 Fitting
22 K 3363 0838 80 1 Hose
− 3361 0316 66 1 Loctite 243
Parts marked with K will be subject to wear in the normal course of operations.
When ordering spare parts please do not forget to state the tool ident. no.
5, 7 20 3 10 12 11 10 13 4 6, 7
ContiLube® II
20 10 22
Parts 5, 6 and 13 secured by Loctite 243
Important:
The hydraulic hoses (parts 11 and 22) must be laid in accordance with the diagram, ensuring
that it can be moved freely and does not make contact at any point.
11
Atlas Copco Construction Tools GmbH
Helenenstrasse 149 S D 45143 Essen
P. O. Box 10 21 52 S D 45021 Essen
Telephone +49 201 633 0
Telefax +49 201 633 1547
Telefax after−sales service +49 201 633 1352
Internet: www.hydraulic−attachments.com
Federal Republic of Germany