Professional Documents
Culture Documents
SN200-1 2016-05 e PDF
SN200-1 2016-05 e PDF
1 Scope ............................................................................................................................................................................ 1
2 Requirements ............................................................................................................................................................... 1
3 Principles...................................................................................................................................................................... 2
3.1 Country-specific regulations ........................................................................................................................................... 2
3.2 Safety regulations .......................................................................................................................................................... 2
3.3 Hazardous materials / environmental protection ............................................................................................................ 2
3.3.1 Basic specifications ....................................................................................................................................................... 2
3.3.2 Inadmissible hazardous materials .................................................................................................................................. 2
3.3.3 Admissible hazardous materials .................................................................................................................................... 2
3.3.4 Radioactivity .................................................................................................................................................................. 2
3.4 Tolerancing principle ...................................................................................................................................................... 2
3.5 Reference surface ......................................................................................................................................................... 2
3.6 Residual magnetism ...................................................................................................................................................... 3
3.7 Marking of components during manufacture .................................................................................................................. 3
This copy will not be updated in case of changes!
1 Scope
This company standard specifies requirements and principles for manufacture and supply of mechanical and fluid power
system products/materials of SMS group.
2 Requirements
The requirements specified in the parts of SN 200 shall be fulfilled if no other requirements are made in drawings, ordering
and/or other manufacturing documents. This standard is indicated as binding document in drawing title blocks, contracts
and/or ordering documents.
If the requirements cannot be fulfilled, consulting with SMS group is necessary.
The SN 200 series of standards comprises the following additional parts:
Number of pages: 5
Edited by: © SMS group GmbH 2016
"The present document is protected by copyright. Reproduction, distribution and utilization of this document
SMS group as well as communication of its contents to others are prohibited unless expressly authorized by us. Any
Standards Office violations will be prosecuted under criminal law and will result in an obligation to pay damages.
All rights reserved."
Page 2
SN 200-1:2016-05
3 Principles
3.1 Country-specific regulations
The place of use of a machine or a component determines the country-specific regulations to be observed.
3.3.4 Radioactivity
All products and materials shall be free of ionising radiation which exceeds the natural characteristic radiation. Ionising radia-
tion is considered to exceed the characteristic radiation when a radiation level is found during an examination which is higher
than the level of the ambient radiation.
SMS group reserves the right of refusing the acceptance of products/materials found to possess such excess ionising
radiation.
Annex A
(for information)
Structure of the WBS number (example)
The WBS (work breakdown structure) element in SAP defines a supply or service to be effected or rendered within the scope
of a project. Figure A.1 shows the structure of the WBS number in an example for SMS group.
A00026.460.02.02.5350
Beispiele:
A = Anlagenprojekt
Klassifizierung des Projekts I = Innenprojekt
E = Ersatzteilprojekt
Anlagentyp
46 =CSP- Anlage
optional Gliederungsebene 3
Produkteinheit
Produkteinheit 5350 Schlingenheber