Professional Documents
Culture Documents
Application: Instrument Commissioning Technician: Jignesh I Patel
Application: Instrument Commissioning Technician: Jignesh I Patel
Application: Instrument Commissioning Technician: Jignesh I Patel
JIGNESH I PATEL
PERSONAL DETAILS
Email : jigsnau@yahoo.co.in
Jigspatel292519@gmail.com
Skype JIGNESH29680
Passport Detail : L0064677, DATE OF ISSUE-28/04/2013,
PLACE OF ISSUE-DOHA
VALID UP TO-27/04/2023
QUALIFICATION
3 YEAR DIPLOMA INSTRUMENT AND CONTROL in year 2003 to 2006 with A Grade Form Institute of
Business Management & Engineering SURAT
INDAI (Approved & attested by Indian government & UAE EMMBESSY)
WORK EXPERIENCE
A total of 13 Yrs. Plus years’ experience in onshore & offshore oil & gas, Power plant,
fertilizer & LNG project.
EPC projects like power plant which include project planning & scheduling, engineering, construction,
maintenance, inspection, testing and commissioning of online process Instrumentation systems &
equipment’s.
Projects consists of installation, commissioning & maintenance of Siemens SGT5-4000F,DOOSAN Boiler
wellhead control panel (WHCP), Utility & Instrument air system (IA), Smart well cabinets, Chemical
Injection skid (CI-skids), delta-V DCS system, SIS ESD system, tank gauging and FGS system.
Experience in the field of Onshore & Offshore Projects (E&I), Construction, Commissioning,
Maintenance and Preparation of QA/QC Documents & Closeout Reports for oil & gas industry.
Generally exposed in Construction, Inspection & commissioning phases of Projects and preparation of
inspection & testing check sheets, commissioning procedures and QA/QC documentation.
Preparation of commissioning binders and reviewing commissioning procedures.
Preparations on commissioning procedures
Preparations to do Inspection & testing check sheets for field instruments &
System
Preparations on working procedures for hazardous area instruments
Maintenance & Calibration of Instruments (Pneumatic & Electronic)
Commissioning of Instrumentation Systems including DCS, PLC and
FIELDBUS
Preparation for closeout reports and QA/QC documents
Inspection of incoming materials of store & take care of proper preservation.
Nature of Work
Participate on Tri- Party walk down with other departments as Commissioning Department
Representatives.
Responsible to ensure that Instrument associated loops has been tested with its operating range and
control limits as per project specification & manufacturer recommendation.
Monitored Technicians daily activities, for the daily progress reports, Prepared worked packs
Required to close ITR
Involved in onshore/ offshore well Head control loop checking, calibration, recalibration, verification,
rectification,
Modification and simulation of various instrumentation and control instruments, function test,
Pre-commissioning & commissioning Activities.
Responsible for all maintenance jobs on the wellhead platforms as an individual charge to carry out the
daily routine checks, preventive maintenance, modifications, involved in operations and well tests.
Installed wellhead Christmas tree instrumentation and brought the wells on-line.
Preparation of Calibration reports, ITR’s (Inspection and Test reports) as per standards.
Tested all kind of instruments like Pressure, Temperature, Level, Flow Transmitter
Make Rosemount, Siemens, ABB, E&H
Instrument loops checked and commissioned including Control Package, HVAC and Fire & Gas
System/Sub-system and control valve, on –off valves and relief valves to Attend Trouble shooting of
Process control and taking Corrective Preventive action.
Investigate and determine root cause of equipment underperformances.
Fire & Gas system 4100u simplex, Mini max 5100 commissioning & maintenance
Involve in Site Acceptance Test, loop checking and function test of ICSS.
Participate to a frequent coordination meeting for a smooth plan of instrumentation, ongoing
Operations, and other disciplines activities.
Qatar Gas 3&4 (QCS) offshore project. Construction & loop Checking and Maintenance work,
Commissioning work Supervised and monitored subcontractor’s instrument installation, pre
commissioning and commissioning activities.
Ensure that all installation is in accordance with the APPROVED FOR CONSTRUCTION drawing and
general standard as per project specification. Coordinate with client, vendor service engineer and
subcontractor’s staff and other discipline in depth knowledge of cable installation and instruments,
cable termination, tray works, panel and junction box installation and small bore instrument-piping
system. Provide technical assistance to other discipline as required.
Involve in maintaining the availability of spare parts, the latest revision of all Contract Documents, Drawings,
Specifications, SPs, PRs, ERDs, DEPs and Standards, required for Quality Assurance, Quality Control and
inspection. Coordinate with purchasing department concerning procurement and delivery of materials.
Conducting pre installation, Testing & calibration of all new instruments such as; FF transmitters, FGS
detectors, Analyzers, control & shutdown valves, MOVs, RCS valves etc.
Working under PMC as loop check supervisor. Responsible for carry out loops check with master loop
drawing like P&ID, ILD, instrument data sheet, etc. Carry out Foundation field bus instruments
download & commissioning with vendor. All segment checked through FTB segment checker
instrument. Familiar with project WINPCS system & QCRD system for refer of project documents.
Familiar with EMERSON DELTA V DCS system as well as TRICONEX IPS system.
Responsibility includes execute construction activities for installation of DCS/ESD cabinet, field
instrument installation, wiring and termination, pre commissioning/loop checked, execute hot loop cut
over of the plant as per process system wise and commissioning of the plant. As built of construction
drawing for final turn over.
Coordination with client inspectors of RLOC to develop and implementing, technical and project specific
procedures, ITP, Method statements and other quality management system procedures to international
codes and standards. Preparation of instrument loop package, documentation of loop tested and
packages and updating of instrument database and maintaining up to date documentation, preparation
and submitting of as-built drawings and data sheets. Inspection for the Installation of Field Mounted
Instruments, Junction Boxes, Local Panels, Pneumatic Leak Test of Air Line Tubing.
Perform inspection of materials and equipment to ensure compliance to approved specifications, proper
handling, storage, preservation and protection of materials of our own project as well as vendor
packages with project standard specification.
Ensure the vendor-supplied instruments are in compliance with the data sheets and other
recommended Project specifications ISO standards and practices such as API, ISA, and CCI etc.
Perform “Hold¨, “Witness¨ and “Surveillance” Inspections and Test to ensure compliance to project
specifications, standards, method statement or work procedure and Inspection Test Plan. Prepare
Inspection Reports; Initiate NCR-Non Conformance Report, FIR-Field Inspection Report, and Equipment
Deficiency Reports as required. Familiar with lotus notes 6.5 for project specifications, Takeover XP for
project hand over, datasheets, P&ID, ILD & construction drawing etc.
Liaising with the client representatives for final acceptances and accomplished activities. Preparation of
request for inspection, check and review inspection records and Test certificates. Preparation of
discrepancy and non-conformance reports Preparation of calibration and testing method statements
Performing Construction Inspection/witnessing all kinds of process instruments calibration and Testing
as per projects specification and approved quality control procedures QCP/ITP.
Calibration of control valve & Smart, HONEYWELL, TDC 3000DCS&PLC- TMR (TRICONEX) and Vibration,
BENTLY NEVDA with 3500 and Instrument cable termination, Loop Checking all of Instrument DCS &
Field side and Plant Commissioning Performing Inspection/witnessing etc.
Construction side team leader & permit holder of job. Implementation of modification of change in DCS
Foxboro I/A series 8.3, Schneider MODICON Quantum PLC with Mess network Installation & erection of
cable trays, flexible SS conduit, system cabinets & it’s hardware FCP 270 field control processor,
communication cabinet & it’s hardware module, Ethernet switch cabinet, new operation CPU & HMI,
work station 1&3 HMI, Power cables, field bus cables, fiber optic cables, CAT 5 cables, GPS system with
antenna, power supply module for PLC etc.
Lead and monitor technical personnel in performing their duties. Review instrument drawing and
implement on site according to owner’s standard and codes. Installation of Instruments according to
the hook up and P & ID drawings Implement safety procedure to correct unsafe working condition
attend coordination meeting and discuss construction matters.
Projects consists of installation, commissioning & maintenance of wellhead control panel (WHCP)
Erosion and corrosion monitoring system (ECMS), make: Corrosion, Utility & Instrument air system
(IA), Smart well cabinets, Chemical Injection skid
All kind of field instruments like pressure, temperature, vibration, level, F&G system, Calibration,
installation, loop checked, pre-commissioning, commissioning done in central process plant of crude oil
Clusters well head instruments like SSSV valve, chock valve, wing valve, interface level control system,
HIPPS control system etc. Fire & gas H2S gas, combustion gas, UV IR flame detectors, smoke
detectors, heat detectors calibration done of ICARE OPTRONICS
(CI-skids), delta-V DCS system, QMR ESD system, tank gauging and FGS system
Perform stepwise commissioning tasks according to the overall plan and procedure, as directed by the
Instruments Supervisors and Instruments Commissioning Engineers
Monitor Mechanical Completion Pre-Commissioning and Commissioning –
Instruments/Controls/Automation systems activities and prepare to support/participate in accelerated
custody transition activities at site.
Carried Out System Commissioning Of DCS System, PLC System, Mark V, Bentley Nevada Vibration
System, Fire & Gas System, ABB SCADA System, Checking With System Integration Test, Loop Testing
From Field To Individual Instrument & System, Detailed Function Login (FLD), Checking As Per Cause &
Effect Correction & Modification During Commissioning As Per Requirement Of Vendor Representative.
Good Command Over Reading & Understanding Of P&ID Loop Diagrams & Logic Diagrams Related To
Interlocking And Emergency Shutdown System, & Prepare Data Sheet & Calibration Report, Prepare
Loop Package Folder.
Familiar With Installation & Commissioning Calibration & Trouble Shooting Of CORIOLIS MASS
FLOWMETER
o Good Knowledge Over Calibration Of FIELD SMART INSTRUMENTS
o (ROSEMOUNT,HONEYWELL, FOXBORO, YOKOGAWA, ABB, SIEAMEN)
Maintenance Overhauling and Calibration of Control Valve, On Off Valve ESD Valve and Related
Accessories Control and Its Monitoring.
Calibration And Loop Checking Of Vibration Monitoring (BENTLYNEVADA), Temperature Scanner
(ROSEMOUNT).
Familiar with SFC (Model 103) (Smart Field Communicator), Hart Communicator (Model 275,375& 475)
Calibration And Checking Of Fire & Gas System Such As Smoke Detector, Gas Detector (H2S, CO) Ultra
Violet Detector, Thermal Detector, Break Glass Units Loop Checking Etc…
Participation in Monthly, Weekly HSE (Health Safety and Environment) Meeting Emergency Drills and
HSE Audits.
Fully Conversant With All The Safety Precaution And Technique Followed In Oil And Gas Industries.
COMPUTER KNOWLEDGE
Operation Systems: DOS, Windows 95/98/XP
Application: MS-Office 2003 (MS-Word, MS-Excel)
P& ID (PEFS/UEFS)
Data Sheet
Location Drawing
Loop Drawing
Instrument Hook up Drawing
Commissioning Procedures
Piping Isometric
Cable Schedule
Junction box Schedule
Panel wiring Drawing
Cable Routing Drawing
Tray Routing Drawing
DCS/PLC functional logic Drawing
All Instrumentation & Electrical Drawing
PERSONAL STRENGTHS
Strong in Interpersonal Communication
Flexibility & Ability to Work in different Circumstances
Focused on company objective and Approach to meet the Desired Results
Languages Known: English, Hindi, Gujarati
CERTIFICATES:
COMMISSIONING TECHNICIAN (OFFSHORE QATAR GAS PROJECT)
----------------------------------------------------------------------------------------------------------------------
A Challenging position, utilizing skill and knowledge developed through my education with an opportunity for
professional growth developed based on performance.
Thanking You
Yours Faithfully
JIGNESH PATEL
H2S, BA & BASIC FIRE FITTING Training in QATAR & SHELL MAJNOON FIELD IRAQ (SIPD)
SEA SURVIVAL at GTSC (Abu Dhabi) EXPAYAR
OTHORISED PERMIT Receiver & Applicant for NPCC,QATAR GAS,SHELL MAJNOON FIELD IRAQ
I like to participate in industrial quiz and also won QATAR GAS monthly Safety award
----------------------------------------------------------------------------------------------------------------------
A Challenging position, utilizing skill and knowledge developed through my education with an opportunity for
professional growth developed based on performance.
Thanking You
Yours Faithfully
JIGNESH PATEL