Professional Documents
Culture Documents
Lab 7.sample
Lab 7.sample
7
Objective:
To Study Load Flow Analysis of Power System on PWS19 using Gauss-Seidal Method
Apparatus:
Intel Based Computer
Theory:
Load Flow by Gauss-Seidel Method:
Procedure:
Firstly I placed a Bus bar 1 and rated it with the 15kV and named it as slack bus.
Then I placed a Generator 1 and with input and output rating of 413MW and -23Mvar.
Then I placed a Generator 2 and with input and output rating of 470MW and 410Mvar.
I also placed a load with input and output rating of 80MW and 40Mvar.
I also placed a load with input and output rating of 800MW and 280Mvar with Bus 2.
Attach Generator 2 with Bus 3 of nominal voltage of 15kV.
Now we connect Bus field with each bus bar to measure the phase and magnitude of
voltage on bus.
Insert Bus 4 with nominal voltage of 345kV. Select Orientation as up.
Insert Bus 5 with nominal voltage of 345kV. Select Orientation as up.
Insert transformer and transmission lines with following parameters:
Save the Case.
Now we connect Bus field with each bus bar to measure the phase and magnitude of
voltage on bus.
Goto Tools and click on “Log”.A dialog box will appear.
Goto Tools and click on “Solve> Gauss-Seidal Power Flow”
At last I run my program for observations.
One-Line Diagram:
Edit Mode:
Run Mode:
Analysis:
Conclusion:
__________________________________________________________________
__________________________________________________________________
__________________________________________________________________
__________________________________________________________________
__________________________________________________________________
__________________________________________________________________