Professional Documents
Culture Documents
CLI Command Modes: Slot Slot
CLI Command Modes: Slot Slot
The CLI can be used to execute commands for the CTL, SWT, or GLCP cards. By default,
after connecting to the AOLT-4000 and successful password verification, the connection is
made to the View mode of the CTL card. At any time, you can connect to a desired card using
the following commands:
slot <slot-id> , where slot-id is 3 or 15, connects to the SWT card of the specified
slot.
slot <slot-id> , where slot-id is 4 through 13, connects to the GLCP card of the
specified slot.