Professional Documents
Culture Documents
11 - Mh2-Mh4-My9-Mh6 Auto
11 - Mh2-Mh4-My9-Mh6 Auto
Vehicle Applications
Buick Enclave (MY9, MH6)
Buick LaCrosse (MH2, MH4)
Cadillac SRX (MH2, MH4)
Chevrolet Equinox (MH2, MH4)
Chevrolet Malibu (MH2)
Chevrolet Traverse (MY9, MH6)
GMC Acadia (MY9, MH6)
GMC Terrain (MH2, MH4)
Product Highlights
Front-drive and all-wheel-drive transaxle
Advanced clutch-to-clutch shift operation
Tuned for quick launch and fuel-efficient cruising
Compact dimensions aid packaging
Hyper-elliptical torque converter saves space
Vane-type variable capacity pump aids efficiency
Ground and honed gears for precise fit and lower noise/vibration
Unique input shaft eliminates costly machining and adds strength
Maximum engine torque rating of 280 lb.-ft. (380 Nm) – MH2, MH4
Maximum gearbox torque rating of 355 lb.-ft. (480 Nm) – MH2, MH4
Maximum engine torque rating of 301 lb.-ft. (407 Nm) – MY9, MH6
Maximum gearbox torque rating of 280 lb.-ft. (380 Nm) – MY9, MH6
Overview
The Hydra-Matic 6T70 (MH2, MH4) and 6T75 (MY9, MH6) transmissions are part of
GM’s family of technically advanced, fuel-saving six-speed automatics designed to
optimize efficiency while delivering exceptional smoothness and an excellent feeling of
performance.
The 6T70 applications include the MH2 version for FWD vehicles and the MH4 variant
for AWD models; it is used in cars and small crossovers, including:
Buick LaCrosse (3.6L V-6 VVT)
Cadillac SRX (3.0L V-6 DI)
Chevrolet Equinox (3.0L V-6 DI)
Chevrolet Malibu (3.6L V-6 VVT)
GMC Terrain (3.0L V-6 DI).
The 6T75 has a higher engine torque rating. The MY9 version is used in FWD models
and the MY9 version is matched with AWD systems. It is used with large crossovers,
including:
Buick Enclave (3.6L V-6 DI)
Chevrolet Traverse (3.6L V-6 DI)
GMC Acadia (3.6L V-6 DI).
A wide overall ratio spread of 6.04:1 allows a “steep” first gear, as well as a “tall”
overdrive top gear for low-rpm highway cruising. Acceleration is maximized, as is fuel
economy. Engine noise is also lower during cruising. Because of the wide ratio spread
(6.04:1), first gear is a very high ratio, which provides brisk acceleration from a stop.
Sixth, however, is an overdrive ratio, which keeps the engine revolutions as low as
possible for highway cruising, reducing engine friction losses and improving fuel
economy.
Design Details
The 6T70/6T75’s design features three planetary gearsets used with three stationary
clutches and two rotating clutches, which save space compared to freewheeling designs.
Freewheeling mechanisms allow perfect timing between shifts, but also take up more
space and add more components to the transmission. However, due to the electronic
controls, the clutch-to-clutch concept of the 6T70/6T75 delivers the same accurate shift
timing.
Adaptive shift controls include automatic grade braking, which commands the
transmission to remain in a lower gear if the vehicle is decelerating or coasting on a
downgrade. This takes advantage of engine braking to prevent unwanted acceleration.
This reduces the need for the driver to brake during a hill descent. The control module
receives input that monitors brake pedal usage, vehicle acceleration rate, throttle
position, and even whether a trailer is connected to the vehicle.
On-Axis Design
Instead of “folding” the transmission around the end of a transversely mounted engine,
which has been one of the dominant GM transaxle design conventions, the 6T70/6T75
contains all of the gearing in line with the crankshaft centerline of the engine. The
advantages of this layout can translate to a shorter overall vehicle length, more interior
room and lower powertrain height.
Gear changes from second to sixth gear ratios are accomplished with a precise clutch-
to-clutch action, where the clutch is engaged in one gear at exactly the same time it is
released in another. The first-to-second upshift, however, is a freewheeling action, where
the second gear clutch engages while the first gear one-way clutch spins freely. This
allows a greater degree of smoothness at lower vehicle speeds.
Compact Dimensions
State-of-the-art dimensions enable spacious packaging and enhance potential safety
design opportunities. In addition, styling opportunities for lower hood lines are also
enabled by the compact dimensions of the 6T70 and 6T75.
Maintenance
The 6T70/6T75 is filled for life with DEXRON®-VI premium fluid, which does not require
changing under normal use. It was developed to have a more consistent viscosity profile;
a more consistent shift performance in extreme conditions; and less degradation over
time. The fluid was validated to improve durability and shift stability during the life of the
transmission.
Transmission Control Module
A 32-bit transmission control module (TCM) monitors transmission performance and
compensates for normal wear in components such as clutch plates, so transmission
performance remains consistent for the life of the transmission. The control module also
“tests” the components of the transmission following assembly to optimize the interaction
of the components.
The TCM is mounted inside the transmission, where temperatures remain mostly
constant compared to an external-mounted module. It is small in size, which helps
minimize the overall size of the transmission. The transmission and module are
assembled together, so no additional connections are necessary during vehicle
assembly.
TECHM
The 6T70/6T75’s transmission electronic hydraulic control module (TEHCM –
pronounced “TECH-im” by engineers) contains basic software and algorithms shared
among all Hydra-Matic six-speed variants, including RWD, FWD and AWD. The module
is located inside the transmission, which reduces manufacturing complexity, and
requires only vehicle-specification calibration to the core program. The TECHM also
enables features such manual shift control and grade logic.
###