Professional Documents
Culture Documents
PG 0031 HK 2014 en Ölflex Classic 110
PG 0031 HK 2014 en Ölflex Classic 110
PG 0031 HK 2014 en Ölflex Classic 110
Various applications
ÖLFLEX®
PVC outer sheath and numbered cores
UNITRONIC®
ÖLFLEX® CLASSIC 110
VDE-registered oil-resistant PVC control cable for a wide range of applications
Info
ETHERLINE®
conductors
HITRONIC®
▯ Oil-resistant according to DIN EN 50290-2- cable
22 (TM54)
■ Application range Core identification code
Black with white numbers acc. to VDE
▯ For fixed installation as well as occasional ■ Norm references / Approvals 0293-1
flexing at free, non-continuously recurring ▯ VDE reg. no. 7030 for the following sizes:
movement without tensile load Specific insulation resistance
up to 2.5 mm²: 2 - 65 cores
> 20 GOhm x cm
▯ Dry or damp rooms that are subject to from 4 mm²: 2 - 7 cores
medium mechanical loads Conductor stranding
▯ Suitable for torsional applications which ■ Product make-up Fine wire according to DIN EN 60228
are typical for the loop in wind turbine ▯ Fine-wire strand made of bare copper
(VDE 0295), class 5 / IEC 60228 class 5
generators (WTG) wires Torsion movement in WTG
EPIC®
▯ In power chains for a travelling distance up ▯ PVC insulation LAPP P8/1 TW-0 & TW-1, refer to Appendix T0
to 5 m and 0,2 ... 1 million bending cycles, ▯ Cores twisted in layers Minimum bending radius
for following dimensions: 0,5 to 2.5mm² ▯ PVC outer sheath, grey (RAL 7001) Occasional flexing: 10 x outer diameter
and 2 to 7 conductors In power chains: 15 x outer diameter
Fixed installation: 4 x outer diameter
Nominal voltage
SKINTOP®
U0/U: 300/500 V
Test voltage
4000 V
Protective conductor
G = with GN-YE protective conductor
X = without protective conductor
Temperature range
Occasional flexing: -15°C to +70°C
In power chains: -5°C to +70°C
SILVYN®
Fixed installation: -40°C to +80°C
Article number Number of cores and Standard lengths, metre Outer diameter Copper index (kg/km) Weight (kg/km)
mm² per conductor (mm)