Professional Documents
Culture Documents
Chemrite PP Fibre
Chemrite PP Fibre
Chemrite PP Fibre
Fibre
Product Data
_______________________________________________________________________________
Type Polypropylene fibres
_______________________________________________________________________________
Form White fibre
_______________________________________________________________________________
Packaging Available in 600 gm to 900 gm bags
_______________________________________________________________________________
Storage Condition Protect from direct sunlight. Store in a dry area in original
packaging between +5°C and +40°C.
_______________________________________________________________________________
Shelf Life 18 months minimum if stored properly in original unopened
packaging.
_______________________________________________________________________________
Chemrite P.P. Fibre
_______________________________________________________________________________
Technical Data
______________________________________________________________________________
Density 0.9 ± 0.01 Kg/L
______________________________________________________________________________
Fibre Length Available in lengths of 6, 9, 12, 19 mm.
______________________________________________________________________________
Fibre Diameter Approx: 15 – 30 micron
______________________________________________________________________________
Absorption Nil
______________________________________________________________________________
Tensile Strength 300 – 450 MPa
______________________________________________________________________________
Elongation at Break ≥ 15 %
______________________________________________________________________________
Softening Point 160°C
______________________________________________________________________________
Specific Surface Area Approx 200 m2/Kg
______________________________________________________________________________
Thermal Conductivity Low
______________________________________________________________________________
Alkali Resistance 100%
______________________________________________________________________________
Application Details
______________________________________________________________________________
Dosage Chemrite P.P. Fibre is ready to use. Dosage is 0.6 to 0.9 Kg/m3
(average 100 gm per 50 Kg cement) of the mortar or concrete
depending on the mix ratio.
______________________________________________________________________________
Dispensing Chemrite P.P. Fibre should be ideally added at the batching
plant; although in some cases this may not be possible, then site
addition can be done. If mixing is at the batching plant, the fibre
should be added first along with some mixing water (30%). After
all the other ingredients have been added, including the
remaining mixing water, the concrete or mortar should be mixed
for a further few minutes at full speed to ensure uniform fibre
dispersion.
______________________________________________________________________________
Curing Standard curing practice must be followed.
______________________________________________________________________________
Cleaning Clean all equipment and tools with water immediately after use.
______________________________________________________________________________
Remarks Application temperature +5°C to 40°C.
______________________________________________________________________________
Safety Chemrite P.P. Fibre is non-hazardous & non toxic.
Chemrite P.P. Fibre
_______________________________________________________________________________