Professional Documents
Culture Documents
Sample Spiral Stair Assembly Drawing PDF
Sample Spiral Stair Assembly Drawing PDF
Sample Spiral Stair Assembly Drawing PDF
)
(Typ
23° p)
Tread support plates from 10mm THK plate, ribs (Ty
123 Finial detail and material to be
from 12mm THK plate. Both ribs and support confirmed. Dia 150 ball (from hardwood)
plates are fully welded to centre post shown for illustration purposes only.
NOTES:
1. All fabricated metal items from 304 Grade Stainless Steel finished to mirror polish.
2. Site welding and polishing required.
3. Stair Steelwork may need to be manufactured in 2 sections to allow installation on site.
4. Handrail welded to posts on site.
5. This drawing to be read in conjunction with XX.42.01 - In Situ Assembly
6. Stair designed in accordance with BS 5395: Part 2 : 1984, Category B Private Stair.
DETAIL D
Individual Rise : 212mm
Centre Line Going : 194mm
SCALE 1 : 10
Nominal tread angle on plan : 23 degrees
Clear width : 828mm
VIEW FROM UNDERSIDE Baluster posts from dia 26.9 x3.2 CHS,
fitted with top end cap and dia 12 x70
handrail spigot. Posts secured to treads
using M10 stud rod screwed into
internal tread boss inside post and
secured under tread with 3mm oversize
washer and M10 Dome Nut.
4440
2756
14 Treads from select hardwood. 40mm THK.
All treads fitted with 3 no. 3mm wide aluminium anti -
slip bars rebated into tread and protruding
approxmately 1.5mm. Timber treads secured to tread
support plate using 8 No. size #8 (A2 SS) countersunk
wood screws from underside.
935
A A
372
5
6 4
200 R950
3
7
Scale 1:10
114.30
200
2
8
23° (typ)
1
9
SECTION A-A
82
10
8
solve
HOLE CENTRES ON FABRICATED PARTS 1.0
GENERAL NOTES (U.N.O.) FINISH: CLIENT:
- DEBUR AND BREAK SHARP EDGES PROFILED PLATES TOLERANCES
LASER CUTS 0.2
A N OTHER
- ALL HOLES NORMALLY DRILLED
- DIMENSIONS ARE IN MILLIMETERS FLAME CUTS 1.5
STATUS: TITLE:
PLAN VIEW - DO NOT SCALE DRAWING MACHINED PARTS TOLERANCES
LINEAR AND ANGULAR DIMS SAMPLE engineering MODIFIED MIXER 1
Mechanical Engineering Design
Copyright © Solve Engineering UP TO 100 0.1
and Draughting Services
100 TO 400 0.2
and/or their clients. This drawing OVER 400 0.5 NAME SIGNATURE DATE
and/or any part thereof must not DRAWN S. PAUL MAY 2012 e: sam@solveengineering.com DWG NO.
SAMPLE SPIRAL STAIR ASSEMBLY DRAWING
REVISION
be reproduced without the GEOMETRICAL TOLERANCES
CHK'D
t: 02825 882058
MACHINED PARTS ISO 2768-H w: www.solveengineering.com
permission of the owner. OTHERWISE ISO 2768-L WEIGHT: KG SCALE:1:20 SHEET 1 OF 1 SHEET SIZE: A1