CODES AND STANDARDS
The following key design standards will apply. It is the contractor's responsibility to
ensure that the latest versions of applicable codes are adhered to.
Process systems
Standard/Code
Title
Process Systems
API RP 2A
Recommended Practice for Planning, Designing and Constructing
Fixed Offshore Platforms — Working Stress Design
API Std 610 Centrifugal Pumps for Petroleum, Heavy Duty Chemical and Gas
APIRP 14¢ Analysis, Design, installation and Testing of Basic Surface Safety
Systems on Offshore Production Platforms
APIRP 14E Recommended Practice for Design and Installation of Offshore
Production Platform Piping Systems
API 12J Specifications for Oil & Gas Separators
API RP 520 Parts
1&
Sizing, Selection and Installation of Pressure-Relieving Devices in
Refineries
API RP 521 Guide for Pressure-Relieving and Depressuring Systems.
ASME B31.3 Process Piping
pare NS Standard Gas Transmission and Distribution Piping Systems
Boiler & Pressure Vessel Code, Rules for Construction of
ASME VIII Pressure Vessels
DNV OS-F101 Offshore Standard for Submarine Pipelines‘StandardiCode
Title
NACE MR-01-75
Standard Material Requirements - Sulphide Stress Cracking
Resistant Metallic Materials for Oilfield Equipment
Mechanical Design
DNV OS-F101 _ | Offshore Standard for Submarine Pipelines
ASME B31.8 Standard Gas Transmission and Distribution Piping Systems.
ASME B31.3__| Process Piping
ASMEB16.6 —_| Steel Pipe Flanges and Flange Fitting
ASME B16.9 __| Factory Made Wrought Butt-velding Fittings
ASME A58.1__| Building Code Requirements for Minimum Design Loads in Building
and Other Structure
API RP 2A, Recommended Practice for Planning, Designing and Constructing
Fixed Offshore Platforms — Working Stress Design
ASME Sec. |__| ASME Boiler & Pressure Vessel Code, Section Il - Materials
‘ASME Sec. Vill | ASME Boiler & Pressure Vessel Code, Section Vill - Rules for
Construction of Pressure Vessels
ASME Sec. V | ASME Boiler and Pressure Vessel Code, Section V: Non
Destructive Examination
‘ASME Sec. IX _ | ASME Boiler and Pressure Vessel Code, Section IX: Welding and
Brazing Qualifications
API610 Centrifugal Pumps for Petroleum, Heavy Duty Chemical and Gas
APIG1S ‘Special Purpose Gear Units for Petroleum, Chemical and gas
Industry Service - Sth Editions
API614 Lubrication Shaft-Sealing and Control-Oil system for Special
Purpose Applications
API 670, Machinery Protection Systems
‘API Spec2C | Offshore Cranes
API Spec SL | Specification for Line Pipe
API Spec 12D _| Specification for Field Welded Tanks for Storage of Production
Liquids
‘API Spec 12F | Specification for Shop Welded Tanks for Storage of Production
Liquids
API RP 2D ‘API recommended Practice 2D, Operation and Maintenance of
Offshore Cranes, 5th EditionsStandard/Code
Title
API RP 14C. Analysis, Design, Installation and Testing of Basic Surface Safety
Systems on Offshore Production Platforms
API RP 14E Recommended Practice for Design and Installation of Offshore
Production Platform Piping Systems
API RP 500 Recommended Practice for Classification of Locations for Electrical
Installations at Petroleum Facilities Classified as Class |, Division 1
and Division 2
API RP 505 Recommended Practice for Classification of Locations for Electrical
Installations at Petroleum Facilities Classified as Class |, Zone 0,
Zone 1 and Zone 2
API RP 520 Parts
tall
Sizing, Selection and Installation of Pressure-Relieving Devices in
Refineries
API RP 524 Guide for Pressure-Relieving and De-pressuring Systems
AWS D 1.1 Structural Welding Code - Steel
WRC 107 Local Stresses in Spherical and Cylindrical Shells Due to External
Loadings
WRC 297 Local Stresses in Cylindrical Shells Due to External Loading on
Nozzle
NACE MR Standard Material Requirements — Sulphide Stress Cracking
0175 /1SO Resistant Metallic Materials for Oilfield Equipment
15156
Oil Industry Safety Directorate (OISD)
OISD-STD-110 | Recommended Practices on Static Electricity Rev. |
OISD-STD-113 | Classification of Area for Electrical Installation at Hydrocarbon
and Handiing Facilities
(OISD-STD-137 _ | Inspection of Electrical Equipment
OISD-STD-146 _| Preservation of Ideal Electrical Equipment
OISD-STD-147 _| Inspection & Safe Practice During Electrical installations
OISD-STD-149 | Design Aspects for Safety in Electrical Systems
OISD-STD-173 _| Fire Protection System for Electrical Installations
OISD-STD-180 _| Lightning Protection
OISD-STD-189 | Fire Protection System for Oil and Gas Fixed Type Offshore
Production Platforms Part (I) DRAFT.‘StandardiCode
Title
OISD-STD-191 | Oil Field Explosive Safety
Indian Standards
18 2148:2004 _] Electrical Apparatus for Explosive Gas Atmospheres -Flameproof
Enclosure “d”
IS 5780:2002 Electrical Apparatus for Explosive Gas Atmospheres -Intrinsically
Safe “i”
IS 13408 Part | Code of Practice for the Selection, Installation and Maintenance of
411992 Electrical Apparatus for Use in Potentially Explosive Atmospheres
(Other than Mining Applications or Explosives Processing and
Manufacture) - Part 1: General
IS 13346:2004 | Electrical Apparatus for Explosive Gas Atmospheres -General
Requirements
Is 13047 ‘Specification for Low-voltage Switchgear and Control gear
18 8623 Specification for Low-Voltage Switchgear and Control gear
Assemblies
18 3716:1978 | Application guide for insulation coordination
1S 2165-Part1 | Part 1: Phase to Earth insulation Coordination Principles and
Rules
1S 2165-Part2 _| Part 2: Phase to Phase Insulation Coordination Principles and
Rules
1S 2165-Part5 | Part 5: Procedures for High-Voltage Direct Current (HVDC)
Converter Stations
1S 2206-Part 1 | Flameproof Electric Lighting Fittings-Part 1: Well-Glass and
Bulkhead types
1s 3842 ‘Application Guide for Electrical Relays for AC Systems
IS 12021:1987
‘Specification for Control Transformers for Switchgear and Control
Gear for Voltages not Exceeding 1000 Vac
IS 12032 Part 7:
1987
Graphical Symbols for Diagrams in the Field of Electro-
Technology: Part 7 Switchgear, Control Gear and Protective
Devices
International Standards
API RP 500 Recommended Practice for Classification of
Locations for
Electrical Installations at Petroleum Facilities Classified as Class |,
Division 1 and Division 2
API RP 505 Recommended Practice for Classification of
Locations for
Electrical Installations at Petroleum Facilities Classified as Class |,‘StandardiCode
Title
Zone 0, Zone 1 and Zone 2
APLRP 14F Design and Installation of Electrical Systems for Fixed and
Floating Offshore Petroleum Facilities for Unclassified and Class
1, Division 1, and Division 2 Locations
APIRP 14FZ | Design and Installation of Electrical Systems for Fixed and
Floating Offshore Petroleum Facilities for Unclassified and Class
1, Zone 0, Zone 1 and Zone 2 Locations
BS 381C Colour Standards for General Purposes.
IEC 1000 Basic EMC Standards
IEC 60269 Low Voltage Fuses - Fuses With Enclosed Fuse-Links.
IEC 60332 Tests on Cables under Fire Conditions
Part 1: Tests on Single Vertical Insulated Wire or Cable
Part 3: Tests on Bunched Wire or Cables
IEC 60359 Direct Acting Indicating Electrical Measurement Instruments and
Their Accessories.
IEC 60502 ‘Approval and Test Specification - Electric Cables - Thermoplastic
Insulated - < 0.6/1KV.
IEC 60529 Degrees of protection - electrical equip (Ingress Protection Code).
1EC 60079-0 | Electrical Apparatus for Explosive Gas Atmospheres, Part 0:
General Requirements
IEC 60079-1 Electrical Apparatus for Explosive Gas Atmospheres, Part 1:
Construction and Ventilation Test of Flameproof Enclosures for
Electrical Apparatus
IEC 60079-10 | Electrical Apparatus for Explosive Gas Atmospheres, Part 10:
Classifications of hazardous areas
IEC 60092-3 _| Electrical Installations in Ships-Cables (Construction, Testing and
Installation)
IEC 60331 Fire Resisting Characteristics of Electric Cables,
IEC 60332-3 | Tests on Electric Cables under Fire Conditions
IEC 605 Approval and Test Specification - General Requirements for
Electrical Equipment.
IEC 61000-5-2 | EMC- Installation and Mitigation Guidelines Earthing and CablingStandardiCode
Title
EC 61508 Functional Safety of —_Electrical/Electronic/Programmable
Electronic Safety Related Systems.
1EC 61511 Standard for Functional Safety: Safety instrumented Systems for
the Process Industry
1ECT1 1EC99 Surge arresters (diverters)
EC 782 Transducers for electrical measurement.
EC 801 EMC requirements for industrial process control instrumentation
IEE Regulations for electrical installations (IEE Wiring Regulations)
NFPA 70 National Electrical Code
Electrical system:
1EC 60079 Electrical Apparatus for Explosive Environment
IEC 60529 Degrees of Protection Provided by Enclosures (IP codes)
IEC 60334 Fire Resisting Characteristics of Electric Cables
1EC 60332 Test on Electrical cables under fire conditions. Part 3 Test on
bunched wires and cables.
EC 60485 General Rules for Terminal Marking System
1EC 61000 Electromagnetic Compatibility
EC 61131 Programmable Controllers
1EC 61204 LV Power Supply with DC Output Characteristics and Safety
Requirements.
IEC 61508 Functional Safety of Electrical) Electronic!
Programmable
Electronic ~ Safety Related System
IEC 61892-7 | Mobile and Fixed Offshore Units - Electrical Installation -
Hazardous Area,
IEC 244 Measurement Methods Applicable to Radio Transmitter
IEC 315, Measurement Methods for Radio Receivers of Different Classes
of Emission
IEC 1508 Functional Safety: Safety Related SystemStandard/Code | Title
API RP 551 Process Measurement Instrumentation
API RP 554 Process Instrument and Control
API RP 14FZ RP for Design and Installation of Electrical System for Fixed and
Floating Offshore Petroleum Facilities for Unclassified and Class
1 Zone 0, Zone1 and Zone 2 locations
API RP 14J Design and Hazard Analysis for Offshore Production Analysis