09.2012 Guide Step-By-Step Step 1. Mount the Scania Multi 09.2012 and run setup.exe (IF automatic NOT come...)
Only for winXP
Step2. Select Next
Step3. Select Next
Step4. Install Microsoft .NET framework 1.1 This installation is only asked if your computer does not have NETFramework 1.1 My case Step5. Installation complete press OK
Step6. Install IsoView Select YES
Step7. Select Next
Step8.Select YES
Step9. Select a name for your company example”###” and NEXT
Step10. Select NEXT
Step11. Select Finish
Step12. Select YES to install Acrobat Reader 6.0.1 I have installed on my Pc acrobat reader XI Pro I have selected YES to this installation
Step13. Select NEXT
Step14. Select NEXT
Step15. Select NEXT
Step16. Select INSTALL
Step17. Select FINISH
Step18. Select options 1º Application and Data ,2º tick Accept , and press NEXT
Step19. Select NEXT
Takes long time If you find that the installation does not proceed, terminates the application through the task manager , REBOOT PC and restart from first step. Is not need to install Acrobat Reader again or other aplication. Step20. Select YES Step21. Select APPLY and CLOSE
DO NOT RUN SCANIA MULTI
Step22. Lunch Microsoft Acess 20** And open Multi.mdb "C:\MultiDat\Catalog\Multi.mdb"
Step23. Enable contente Blocked
Step24. Open the table "MultiProParameter"
Step25. On parameter "PROD_STAMP"
Replace with: *').$,#( t Save! Step26. Close Microsoft Acess 20** And from Desktop RUN Scania Multi