RCC94 Two-Way Slabs (Tables)

You might also like

Download as xls, pdf, or txt
Download as xls, pdf, or txt
You are on page 1of 5

Project Spreadsheets to BS 8110 & EC2 The Concrete Centre

Client Advisory Group Made by Date Page


Location 32nd floor - corner panel F to G: 1 to 2 RMW 25-Jun-2018 174
2-WAY SPANNING INSITU CONCRETE SLABS to BS 8110:2005 (Table 3.14) Checked Revision Job No
Originated from RCC94.xls v3.1 © 2006 TCC chg - R68

DIMENSIONS MATERIALS STATUS VALID DESIGN


short span, lx m 2.80 fcu N/mm² 40 gc = 1.50 F G
long span, ly m 3.80 fy N/mm² 500 gs = 1.15 Edge 1
h mm 300 steel class A 1

Lx = 2.8 m
Top cover mm 40 Density kN/m³ 23.6 Plan
Btm cover mm 40 (Normal weight concrete)

Edge 4

Edge 2
LOADING characteristic EDGE CONDITIONS
Self weight kN/m² 7.08 Edge 1 D C = Continuous
Extra dead kN/m² 0.00 Edge 2 D D = Discontinuous Ly = 3.8 m
Total Dead, gk kN/m² 7.08 gf= 1.40 Edge 3 D
Imposed, qk kN/m² 36.88 gf= 1.60 Edge 4 D 2
Design load, n kN/m² 68.91 See Figure 3.8 and clauses 3.5.3.5-6 Edge 3

SHORT LONG EDGE 1 EDGE 2 EDGE 3 EDGE 4 BS8110


MAIN STEEL SPAN x SPAN y Free Free Free Free Reference
ßs 0.084 0.056 0.000 0.000 0.000 0.000 Table 3.14
M kNm/m 45.6 30.3 0.0 0.0 0.0 0.0
d mm 254.0 242.0 254.0 240.0 254.0 240.0
k' 0.156 0.156 0.156 0.156 0.156 0.156
k 0.018 0.013 0.000 0.000 0.000 0.000
Z mm 241.3 229.9 241.3 228.0 241.3 228.0 3.4.4.4
As req mm²/m 435 303 0 0 0 0
As min mm²/m 390 390 390 390 390 390 Table 3.25
As deflection mm²/m 435 303 ~ ~ ~ ~
Ø mm 12 12 12 16 12 16
Layer B1 B2 T1 T2 T1 T2
@ mm 250 275 275 500 275 500
As prov mm²/m 452 411 411 402 411 402
= % 0.178 0.170 0.162 0.168 0.162 0.168 %
S max mm 762 738 762 736 762 736 Clause
Subclause (a) (a) (a) (a) (a) (a) 3.12.11.2.7
DEFLECTION
fs 321 245 0 0 0 0 Eqn 8
Mod factor 1.361 Eqn 7
Perm L/d 27.23 Actual L/d 11.02 Asx enhanced 0.0% for deflection control Table 3.10

TORSION STEEL BOTH EDGES DISCONTINUOUS ONE EDGE DISCONTINUOUS
Ø mm 10 X Y X Y
As req mm²/m 390 390 3.5.3.5
As prov T mm²/m 411 402 5000 5000
Additional As T req mm² 0 0 0 0
As prov B mm²/m 452 411 452 411
Bottom steel not curtailed in edge strips at free edges

SUPPORT REACTIONS (kN/m char uno) (See Figure 3.10) Sum ßvx = 0.842 Table 3.15
EDGE 1 EDGE 2 EDGE 3 EDGE 4 Sum ßvy = 0.667
1, F-G G, 2-1 2, F-G F, 2-1 equations
ßv 0.421 0.333 0.421 0.333 19 & 20
Dead kN/m 8.35 6.61 8.35 6.61
Imposed kN/m 43.47 34.42 43.47 34.42
Vs kN/m 81.2 64.3 81.2 64.3
OUTPUT/SUMMARY
SHORT LONG EDGE 1 EDGE 2 EDGE 3 EDGE 4
PROVIDE SPAN SPAN 1, F-G G, 2-1 2, F-G F, 2-1
MAIN STEEL H12 @ 250 B1 H12 @ 275 B2 H12 @ 275 T1 H16 @ 500 T2 H12 @ 275 T1 H16 @ 500 T2

ADDITIONAL CORNER 1 CORNER 2 CORNER 3 CORNER 4


TORSION STEEL F1 G1 G2 F2
X direction
placed in edge strips
Y direction

CHECKS BAR Ø SINGLY MIN MAX GLOBAL


Lx > Ly < COVER REINFORCED SPACING SPACING DEFLECTION STATUS
OK OK OK OK OK OK VALID DESIGN
Project Spreadsheets to BS 8110 & EC2
Location 32nd floor - corner panel F to G: 1 to 2
2-WAY SPANNING INSITU CONCRETE SLABS to BS 8110:2005 (Table 3.14) Made by RMW Job No R68
Originated from RCC94.xls v3.1 © 2006 TCC Date 25-Jun-18

APPROXIMATE WEIGHT of REINFORCEMENT

SUPPORT WIDTHS GRIDLINE 1 G 2 F


(mm) WIDTH 300 300 300 300

TOP STEEL Type Dia Spacing No Length Unit wt Weight


Across grid 1 H 12 @ 275 13 775 0.888 8.9
Across grid G H 16 @ 500 5 775 1.578 6.1
Across grid 2 H 12 @ 275 13 775 0.888 8.9
Across grid F H 16 @ 500 5 775 1.578 6.1

Along grid 1 H 12 @ 275 2 3525 0.888 6.3


Along grid G H 12 @ 275 2 2525 0.888 4.5
Along grid 2 H 12 @ 275 2 3525 0.888 6.3
Along grid F H 12 @ 275 2 2525 0.888 4.5

Torsion bars H 10 0 0 0.617 0.0

BOTTOM STEEL
Short span - middle H 12 @ 250 12 2600 0.888 27.7
edges H 12 @ 250 2 3025 0.888 5.4
Long span - middle H 12 @ 275 8 3650 0.888 25.9
edges H 12 @ 275 2 3725 0.888 6.6

SUMMARY
Reinforcement density (kg/m³) 30.7 Total reinforcement in bay (kg) 117
Disclaimer
All advice or information from the British Cement Association and/or The Concrete Centre
intended for those who will evaluate the significance and limitations of its contents and t
responsibility for its use and application. No liability (including that for negligence) for any
resulting from such advice or information is accepted by the BCA, TCC or their subcontract
suppliers or advisors. Users should note that all TCC software and publications are subjec
revision from time to time and should therefore ensure that they are in possession of the la
version.

This spreadsheet should be used in compliance with the accompanying publication 'User Guide
Spreadsheets: v3' available from The Concrete Bookshop, www.concretebookshop.com, Tel +
(0)700 4 607777 or +44 (0)1276 607140

Status of spreadsheet
Public release version.

Revision history RCC94 Two-way Slabs (Tables)

Date Version
28-Jun-06 RCC94 v3.1

12-Nov-05 RCC94 v3.0


22-Jan-03 RCC94 v2.1
11-Oct-02 RCC94 v2.0

22-Jun-00 RCC94 v1.3

8-Jun-00 RCC94 v1.2

24-Mar-00 RCC94 v1.1

6-Aug-99 RCC94 v1.0


nformation from the British Cement Association and/or The Concrete Centre is
hose who will evaluate the significance and limitations of its contents and take
or its use and application. No liability (including that for negligence) for any loss
such advice or information is accepted by the BCA, TCC or their subcontractors,
dvisors. Users should note that all TCC software and publications are subject to
me to time and should therefore ensure that they are in possession of the latest

et should be used in compliance with the accompanying publication 'User Guide RC


v3' available from The Concrete Bookshop, www.concretebookshop.com, Tel +44
7 or +44 (0)1276 607140

This spreadsheet is shareware. It may be distributed freely, but may not be used for
commercial purposes until the user has registered with the TCC via
The Concrete Bookshop.
ry RCC94 Two-way Slabs (Tables)

Action Size (kB)


v3 release. Page nos, User Guide and registration details
212
amended.
Updated to 2005 versions of BS8110 & BS8666 239
DETR logo replaced by DTI. 206
Version 2 enhancements 224
Orientation warning added at MAIN:Q21 (N Thomas)
136
Conditional formating Main!K10:P19 altered
MAIN:D34 etc corrected to include As min. 135
MAIN:F46 moved to correct position, MAIN:D64-D67
135
reformatted, continuity hatching added to diagram.
First public release.
136
Includes b version comments

You might also like