Professional Documents
Culture Documents
Huawei OLT MA5680T/MA5683T Super Control Unit Board H802SCUN Hardware Description
Huawei OLT MA5680T/MA5683T Super Control Unit Board H802SCUN Hardware Description
Compiled by Thunder-link.com
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their
respective holders.
Notice
The purchased products, services and features are stipulated by the contract made between
Huawei and the customer. All or part of the products, services and features described in this
document may not be within the purchase scope or the usage scope. Unless otherwise
specified in the contract, all statements, information, and recommendations in this document
are provided "AS IS" without warranties, guarantees or representations of any kind, either
express or implied.
The information in this document is subject to change without notice. Every effort has been
made in the preparation of this document to ensure accuracy of the contents, but all
statements, information, and recommendations in this document do not constitute a
warranty of any kind, express or implied.
Email: support@huawei.com
H802SCUN Board
Contents
8.6.8 H802SCUN Board
Parameters
Working Principle
Figure 1 Working principle of the H802SCUN board
The control module manages the entire board and the service
boards, and communicates with the fan tray through the extended
serial port.
The power module supplies power to other functional modules of
the board.
The clock module provides clock signals for other functional
modules of the board.
The switching module provides the GE port and the 10GE port to
switch and aggregate services at Layer 2 or Layer 3.
Providing four GE ports for upstream transmission using
ports on the front panel
Providing two GE/10GE ports for each upstream boards in
upstream transmission
Providing 16 GE/10GE ports for implementing GE/10GE
switching on each service board
Providing two 10GE ports for load sharing with the
standby control board(supported in V800R011C00 and later versions)
Indicator
Indicator Name Status Meaning