Professional Documents
Culture Documents
ESCO Catalogue PDF
ESCO Catalogue PDF
WORLD LEADER IN
SPECIALIZED EQUIPMENT
FOR THE HEAVY DUTY
TRUCK, EARTHMOVER,
AND MINING AFTERMARKET
VOL.26
Known Throughout The World For
Value, Quality, And Commitment To
Provide The Same Quality Of Service To
Our Customers...
ESCO is a World Leader in the Manufacturing of Quality Tire Service Equipment for
Automotive, Agricultural, Truck, OTR, and Mining Industries.
Based out of a 26,000 sq. ft. warehouse, ESCO provides first rate service to Customers
worldwide. ESCO’s equipment is used for Tire Changing, Lifting, and Wheel Servicing around
the world.
ESCO has an in-house hydraulic repair facility where we feature a, “Guaranteed 24 Hour
Turnaround Hydraulic Tool Repair Program”. ESCO is known in the Tire Changing
Industry as the “Expert” in servicing Heavy Duty Single and Multi-Piece Rims. We have been
in business for over 25 years, and have the Proper Tools to Keep Your Equipment Moving...
PNEU-TEK
Tire Tools
TM
x TM TM
T RU CK T I RE D E M O U N T TOOL
Rams, high tonnage jacks, support jack plates, jumbo jacks &
Rams & Jacks............................10 accessories
Truck & bus valves double seal caps, dual foot air chucks,
Valves & Hardware...................13 tire tread depth gauge, valve cores, valve caps, valve cap tool
Brake Safe
Brake Safe....................................31
4 ton forklift jack, 7.5 ton forklift jack, forklift jack stands,
Forklift Jacks & Stands..............37 3 ton jack stands
passenger & truck tire bead seaters, premium hydraulic oil, hydraulic
Accessories.................................38 couplers & Hydraulic hoses
OSHA
Many of ESCO’s products aid employers in complying with OSHA Regulation 29 CFR 1910.177
“Servicing Multi Piece and Single Piece Wheel/Rim/Tires”
WARNING:
These Products as well as all tire tools, should never be used
by persons unless they have been properly trained according to
O.S.H.A Regulation #29CFR1910.177 entitled “Servicing Single-
Piece and Multi-Piece Rim Wheels.”
Bead Breakers/Kits Professional Series
10100 KITS:
#10209 #10207 #10209
10100 - Giant Tire Bead Breaker Tool 10100 - Giant Tire Bead Breaker Tool
10592 - Pump, Air Hydraulic, 5 quart 10500 - Turbo II pump, Air Hydraulic, 3 1/2 Quart
10604 - Hose Assembly with Hose Coupler, 8’ 10604 - Hose Assembly with Hose Coupler, 8’
SEE IT IN ACTION: Visit our website at WWW.ESCO.NET for a video demonstration of this product
#10211
10103 KITS:
#10211
10103 - Giant Tire Bead Breaker Tool
10504 - Turbo Pump II, Air Hydraulic, 2 Gallon
10618 - 12’ Hydraulic Hose
10605 - Male Coupler with female threads
10105 KIT:
#10222
10105 - 10105 Bead Breaker
10592 - Pump, Air Hydraulic, 5 quart #10222
10604 - Hose Assembly with Hose Coupler, 8’
#10101
#10202
10101 KITS:
#10202
10101 - “Combi” Bead Breaker Tool
10592 - Pump, Air Hydraulic, 5 Quart
10604 - Hose assembly with Hose Coupler, 8’
#10200 #10200
10101 - “Combi” Bead Breaker Tool
10500 - Turbo II Pump, Air Hydraulic, #10201
3 1/2 Quart +
10604 - Hose Assembly with Hose
Coupler, 8’
#10201
10101 - “Combi” Bead Breaker Tool
10590 - Pump, Air Hydraulic, 2 1/2 Quart
10604 - Hose Assembly with Hose
Coupler, 8’
SEE IT IN ACTION: Visit our website at WWW.ESCO.NET For a video demonstration of this product
10102 KIT:
#10221 10620 Conversion Kit which will allow a standard 10101 style
#10221 Bead Breaker to be converted into a 10102 Bead Breaker
10102- “Maxi” Bead Breaker Tool
The kit consists of:
10500 - Turbo II Pump, Air Hydraulic, • Two 306135L Replaceable Teeth
3 1/2 Quart • One 36853L Claw
10604 - Hose Assembly with Hose • One 420438L Clamp
Coupler 8’
#10620
#10203
10106 KIT:
#10203
10106 - Bead Breaker
10500 - Pump, Hydraulic 3.5 Quart
10604 - Hose Assembly with Hose Coupler, 8’
#70160
#10104
#10216
#10212
#10223
10107 KITS:
#10220
#10107 10107 - Bead Breaker
10592 - Pump, Air Hydraulic 5 Quart
10604 - Hose Assembly with Hose Coupler, 8’
#10220
This bead breaker utilizes European technology to offer a lightweight tool, weighing only 32 pounds. Designed
specifically for use on NEW Heavy Duty 3 piece Earth Mover wheels, that replace the older 5 piece rims with bead
loosening pockets, the tool is ideal for commercial tire dealers.
• 3-hour Earthmover Tire Service Training video which features 15 different modules,
covering the basic safety guidelines for servicing OTR tires, wheels, and rims in the field.
• The video is accompanied by a 200+ page workbook which features hundreds of
four-color photos outlining the step-by-step procedures and various industry resources.
• Students that successfully complete the final exam receive a
TIA Certificate of Completion.
#10000
10500 KITS:
#10501 #10501C
10500 - Turbo II Air Hydraulic Pump 3 1/2 Quart 10500 - Turbo II Air Hydraulic Pump 3 1/2 Quart
10610 - Hose Assembly, 8’ 10604 - Hose Assembly with Hose Coupler, 8’
10592 KITS:
#10593 #10593C
10592 - Air Hydraulic Pump 5 Quart 10592 - Air Hydraulic Pump 5 Quart
10610 - Hose Assembly, 8’ 10604 - Hose Assembly with Hose Coupler, 8’
10590 KIT:
#10591
#10590 10590 - 2 1/2 Quart Pump
10610 - Hose Assembly, 8’
#10591
#10505
10504 KIT:
#10505
10504 - Turbo II 2 Gallon Pump
10610 - Hose Assembly, 8’
#10504
GP PUMP
#90510 • Low Air Consumption (Only 9 cfm) • Rugged construction for
• Large steel 5 qt. reservoir provides plenty of years of service.
oil for operating multiple tools. • Sealed oil feed system.
• Compact Design. • Safer release valve.
• Built-in release valve. • Weight: 35 lbs. (16 kg)
• 10,000 psi max
#90511 90510 KIT:
#90511
90510 - GP PUMP
#GP705 10601 - Hydraulic Oil
Does Not Come Filled With Oil 10604 - Hose Assembly with Hose Coupler 8’
Cylinders/Rams
#10301-10306 Model # Tonnage Retracted Hgt. Stroke Wgt.
10301 10 Tons 4 3/4” 2 1/8” 6 lbs. (3 kg)
10302 10 Tons 6 3/4” 4 1/8” 8 lbs. (4 kg)
10303 10 Tons 9 3/4” 6 1/8” 11 lbs. (5 kg)
10304 10 Tons 11 3/4” 8” 12 lbs. (5 kg)
10305 10 Tons 13 3/4” 10 1/8” 14 lbs. (6 kg)
10306 30 Tons 4 5/8” 2 7/16” 15 lbs. (7 kg)
Hydraulic Rams are a staple for any Tire Dealer/Technician that service
Earthmover Tires. They are used to break the beads on the backside of the tire. In
this case, clearance may make it difficult to use a bead breaker due to a limitation
of space behind the wheel. 8” Rams with a retracted height of 12 3/4” are the ram
of choice in the Mining/Heavy Construction Industry.
Min. Height Max. Height Stroke Weight Min. Height Max. Height Stroke Weight
10 1/2” 16 1/2” 6” 33 lbs. (15 kg) 14 3/8” 24 3/8” 10” 41 lbs. (19 kg)
The 10439 Air Hydraulic Jack is ideal for low profile, heavy duty lifting.
It’s design allows for an easy fit between the wheels of tandem axle
vehicles, saving time and labor.
Specifications:
Capacity: 44 Tons
Handle Length: 57 7/8”
Min. Height: 9 1/4”
Max. Height: 19 1/2”
Jumbo Jacks
• Ideal for: Giant Tire Changing, Mining, Railroads,
Construction Rigging.
• NO NEED for Cribbing - Time Savings.
• Balanced for easy moving.
• Large pneumatic wheels.
• Only 23” wide, the jacks fit in tight spots
• 50” long, 8 position handle for easy tilt back
and moving of the Jack.
• Welded fully enclosed heavy-duty steel frame with
built in lifting holes.
• Rotary style air pump.
• Minimum 90 to 150 psi air supply needed to
power hydraulic pump.
• Extension holders bolted to frame for easy storage.
• Easy to change air filter.
Model # TR No. Bend Angle “L” Horiz. Length “H” Vertical Length
20502 J-650 80o 3 1/8” (79.4mm) 1 5/64” (27.4mm)
o
20505 J-4000-6 90 6” (152.4mm) 1 5/64” (27.4mm)
Straight Valves
#20504
#20503
Clamp-in Spuds
Fits the 13/16” diameter valve hole. The 20507 spud (TR-SP8) can
attach any Super Large Bore valve to the rim through a standard valve hole (13/16”
diameter). Tire must be dismounted to change spud.
#20507
#20501 (TR No. 600HP) used to 80 psi cold inflation pressure, and
fits .453” diameter valve hole, maximum rim thickness .205” at valve hole.
#20501
A Bend B Hex
Model # TR No.
Height Angle Length Nut
o
20493 554D .98 60 2.6 HN-22
o
20494 555D .98 60 2.6 HN-22
Valve Caps
Nickel Plated Metal Dome Valve. (Tire & Rim No. VC-3)
#20510
Special design allows the valve core to stay attached to the tool
after it is removed from the valve. A great tool to keep the valve core
from getting dropped or lost.
#20498
The #20499 makes it easy to remove and install valve caps on inside dual
wheels. Designed for aluminum wheels with small hand holes, it comes with a
protective sleeve to prevent scratching. Also works great at removing tight or
cross-threaded caps. Positive hold while valve is serviced. Keeps cap in tool.
Length 8.25” without handle.
#20499
Complete line of tire valve hardware available.
Call us at 1-800-352-9852 for more information.
Tank
Model # Tank Size Material Weight
Width x Diameter
20390AL 5 Gallon Aluminum 14 lbs. (7 kg) 18” x 10”
20390 5 Gallon Steel 21 lbs. (10 kg) 18” x 10”
20391AL 8 Gallon Aluminum 17 lbs. (8 kg) 21” x 10”
20391 8 Gallon Steel 26 lbs. (12 kg) 21” x 10”
20392 14 Gallon Aluminum 23 lbs. (10 kg) 27” x 12”
TM
#20394 #20395 TM
Upgrade the Yellow Bead Seater you already have with either kit.
These upgrade kits comes in the 1 1/2” Quick Release Valve for five gallon tanks and the 2” for the ten and thirteen
gallon tanks. The two port manifold has two access points for the Safety Pop-Off and the filler valve. This eliminates
the 90o filler valve that used to be on the top of the bushing. This is a more efficient way of assembly, and cuts down
on replacements of the 90 NPT that was softer material. Included: a plug for the outlet where the Safety Pop-Off was
located before. The new gauge has a restrictor to keep the quick discharge from damaging the reading mechanism.
This kit is the same components on the New Cyclone X-Series Bead Seaters. This kit consists of 6 pieces.
Standard Barrel
The Standard Barrel is a redesigned version of the original barrels seen
on most bead seaters. This new barrel is made with a higher grade steel,
built to last and withstand heavy use. Newly designed rim bead support lip
and wider barrel opening for better air disbursement. Comes equipped on
all Cyclone X-Series Bead Seaters. 1 1/2” discharge. (2” Barrel #20420) #20412
CycloBurst Barrel
The New CycloBurst Barrel is redesigned to better
#20423 disburse air throughout the tire when seating with any
Cyclone X-Series Bead Seater. The newly designed
rim/bead supports hold the barrel on the tire with ease and
seat the bead faster and easier than any of the competition.
Disburses 4 to 5 times faster and equally throughout the tire
producing a perfect seat every time. Easy installation and
#20422
easy to use. 3 Different Models that are designed to help
get the job done. #20421 designed specifically for use with
tire changing machines; making it easier to seat the bead
when working on the tire, on tire machines.
#20421
#20399
#20400
The True Seat Tire Inflation Cage effortlessly centers your tire and rim ensuring
that the tire is seated correctly and evenly every time. Even tire seating is essential
in eliminating tire wear and wobble that often occurs with uneven bead seating. In
addition it easily raises and lowers the tire without back-breaking effort.
Weight: 100 lbs. (45 kg)
#20407
the wheel.
• Newly designed reversible hook to work on a
larger range of rim/flanges.
• Will handle much wider range of tires from
automotive tires and up.
• Operates with impact wrench and or
air ratchet wrench.
#20429 • 5” Stroke
• Weight: 13 lbs. (6 kg)
The Tyr-X Truck Tire Demounting Tool is a safe, quick, and reliable tire demounting tool
that makes tire demounting a simple process.
The bearing pivot joint allows the tool to work easily and smoothly. The pivot hooks ensure
easy and positive operation. Its design eliminates aggressive stretching of the tire bead.
One of the easiest and fastest manual truck tire demounting tool on the market. Works on
standard truck tires (22.5-24.5) and can be used for the first bead of super singles or
double wide truck tires. Weight: 17 lbs. (8 kg)
x
TRUCK TIRE DEMOUNT TOOL
TM
x TM
T RU C K T I R E D E M O U N T TO O L
#20408
PNEU-TEK
Tire Tools
TM
This unit works as a hand-held tire machine and shines where other tools fall short. It can tackle
the hard 19.5 reverse hubs and grader tires.
Can be used on all tires sizes from 10” ATV Tires and up.
Great for agricultural tires, one piece grader, loader, forestry and back hoe tires.
Weight: 21 lbs. (9 kg)
Pneu-Tek Impact Demounter Mount/Demount Kits available For Small Tire and Large Tire. Call For More Information
GOLDEN TOOL
TNT-100-1 Dismount Tool TNT-100 Kit
• Removes both top and bottom bead from Mount & Dismount Tire Tool Kit:
short side - no need to flip tire/rim.
• Demount all tubeless tires 17.5” thru 24.5” • TNT-100-1
And Super Singles up through 315/22.5” • TNT-200M
• Including most radial and bias ply tires.
• Demounts tire in 8 seconds.
#90512-1
#90512
#90513-1
#90513
#90515-1
#90515
#90514
42”
13”
37”
The Pneu-Tek Impact Wheel Puller is a speciality tool that quickly, easily
and safely demounts the second bead on a wide variety of tires with
difficult stiff sides.
Works GREAT for sprinkler, forestry, and off-road super single flotation
tires. Pulls wheel off of tire.
PNEU-TEK
Tire Tools
TM
#20418
The Pneu-Tek Bead Push Off Tool is a uniquely designed Bead Push Off Tool that, unlike other
Bead Push Off Tools, is Pneumatic. Works on single piece and multi piece tire/rims.
10” Stroke
PNEU-TEK
Tire Tools
TM
#20424
Mounting Bars
#20402
The #20403 is a shorter 35” heavy duty mounting bar that makes it
easier to handle when mounting on the machine or in a vertical position.
Weight: 6 lbs. (3 kg)
The #20404 is a longer 52” heavy duty mounting bar that gives you
more leverage when mounting in a horizontal position on the ground.
Weight: 8 lbs. (4 kg)
Accessories
Tire Bead Keepers
Bead Wedge Bead Keeper for AG. Tire Bead Keeper
Tractor Tire
#20405
#20397 #20406
3’x3’
#20410
#20411
• Lightweight aluminium body with brass calibration bar and O-ring seals.
• Calibrated 10-120 psi in 2 lb. Increments.
• Precise inflation/deflation control.
• 1/4” female inlet with clip-on air chuck.
• Hoses come in 6 and 12 feet.
• Lock on or Clip on Chuck Available.
• 1/4” Hose, matches up with component sizes. Clip on Chuck
Special Order of Torque Master with higher Torque Values available upon request
Torque Wrench
• Extremely Accurate
• Consistent Torque Values +/- 4%
• Designed to Torque Various Ranges
of Wheel Types and Sizes.
• Use on Single & Dual Wheels.
Specifications:
Square Range Ratchet Engagements Length Weight
Model
Drive N.m ft lb Diameter per revolution
Why Torque?
It’s The Law: OSHA Regulations
Require Accurate Torquing of #10007
Wheels To Help Prevent Wheel Off’s
Rethread Kit
• A 30-second solution to an hour-long job.
• Solves the problem of removing and replacing damaged wheel studs.
• Today’s complex disc brake, four wheel drive, and front wheel drive vehicles make
replacing damaged wheel studs a costly job; This cost must frequently be absorbed.
• If the rotor becomes bent or warped during stud replacement, then it must be turned;
If you turn one rotor, then you must also turn the other one.
• Damaged studs can be renewed in minutes without removing the caliper, rotor, or stud
• Lifetime guarantee.
• Individual sizes also available.
#30100
7/16” 1/2” SAE Left 1/2” 9/16”
SIZES:
5/8” 12mm - 1.25” 12mm - 1.5” 14mm - 1.5”
Save-A-Stud Plus
• Restore don’t replace.
• The best way to fix damaged threads.
• A 30-second solution to an hour-long job.
• Repairs wheel studs, spindles, and standard threaded studs.
• Damaged studs can be renewed in minutes without removing
the caliper, rotor, or stud.
• Unique, patented hinged design (instead of two separate halves)
• Lifetime guarantee.
• Unit comes complete with a plastic carrying case.
7/16” - 20 1/2”- 20 9/16” - 18 5/8” - 18
#30120
SIZES:
12mm - 1.25 12mm - 1.50 12mm - 1.75 14mm x 1.50
#30125
• Removes Damaged
1 1/8” BUDD wheel
#40100
inner cap nuts
#40125
Extended Threading
allowing Skirt Nut to go down into
Hub-Piloted Disc Wheel an extra
3/16” (5mm) into stud hole.
SKIRT NUT
#70132
Tire Steps
• Heavy duty, portable safety step.
• Easy way to service truck engine compartments.
• Holds up to 400 lbs.
• Folds for compact storage (less than 4")
• Galvanized heavy duty steel construction.
• Weight: 19 lbs. (8 kg)
Model # Hole Count Bolt Circle Stud Diameter Studs For: • Graphite/nylon separator plate
is placed between the hub or
60100 10 Hole 11 1/4” 1 1/8” and 7/8” Stud Piloted Wheels
drum and the wheel and/or
60101 10 Hole 11 1/4” 3/4” Stud Piloted Wheels
between two wheels on a dual
60102 10 Hole 285.75mm 22mm Hub Piloted Wheels
application.
60104 10 Hole 335mm 22mm Hub Piloted Wheels • The wheel-guard is highly
60105 8 Hole 275mm 20mm Hub Piloted Wheels recommended in severe
60106 8 Hole 6 1/2” 4.82” ID, 5/8” GM & Dodge applications where corrosion
60107 8 Hole 6 1/2” 5.25 ID, 5/8” Oval Holes, Ford and/or wear has been identified
60108 8 Hole 225mm 6.75” ID, 5/8” Locating Holes Ford 19.5” as a problem.
60109 10 Hole 335mm/13.189” 22 mm Budd Axle: Bus Wheels • Both aluminum and steel truck
wheels will benefit from the wheel
guard.
• Won’t lose its grip on the outer cap nut so there is no loss of torque
this will give the torque wrench maximum power and efficiency.
• Won’t slip or rotate out of position, significantly reducing the
potential for damage to chrome and aluminum wheels.
• Wrench Locks onto rim.
Slide Hammer
#70150
Mounting Clamp
#70210
• For European style rim clamp tire changers.
• Acts like a third and fourth hand.
• Clamp holds tire bead in drop center. Clamps quickly to rim, won’t allow
tire to “walk”.
• Plastic, will not mar or scratch decorative or aluminum rims.
#70200
• Eliminates damage to mag, chrome, • Eliminates “booties” that slip off “combo” tool.
and alloy wheels. • Change inserts in seconds.
• Fits all center post tire changers. • Not for use on steel wheels.
• Replaceable polymer inserts get 500 to 700 • Shipped complete with one set of replacement
mounts/demounts when used correctly. polymer inserts.
#40324
#40322
#40326
Fits type 24LS and 30LS square
port long stroke brake chambers
2.50”
#40331
Fits type 24LS and 30LS square
port long stroke brake chambers BRAKES OUT OF
ADJUSTMENT
Truck (Power Unit) Kits
Clevis Chamber Ref. Unit Typical
Model #
Pin Size Types Stroke Applications
40324 1/2” 16, 20, 24 1.75” Most Steering Axles
40326 1/2” 24LS, 30LS sq. port 2.50” Long-stroke, square port chambers, drive & steer
40328 1/2” 24LS, 30LS, sq. port 2.50” Clamp-on pointer for long push rods
40322 1/2” 30, 16L, 20L, 24L 2.00” Most drive axles & long stroke steering axles
40330 1/2” 30 extended pushrod 2.00” Clamp-on pointer for long push rods
*AIRBAG KIT
Description: Model #
Single Safety Relief and Control Valve 12119
Nipple and Industrial Nipple with Valve 12123
20 Feet Air Bag Jack Hose and Couplers 12122
#10543
#10544
#10540P
Model # Gallons Freeze Point Model # Gallons Freeze Point Simply put dry
#10934
o material into a
10925 6 X 10930 330 -35 F
o
container and add
10926 55 X 10931 6 -50 F predetermined
amount of water
10927 330 X 10932 55 -50o F and mix. Use of
10928 6 -35o F 10933 330 -50o F compressed air
o to aid in mixing is
10929 55 -35 F 10934 Sold Per lb. Powder suggested.
#10455
Specifications:
Sold as individual stands
Capacity: 22 Ton
• The 10455 Jack Stand is used for fleet and maintenance garages.
Per Jack Stand
• Pin type support column adjusts to three different axle height positions.
3 Positions
• Adjustment pin is secured to stand to prevent loss.
Low Height: 14”
• Handle provides ease of positioning and carrying.
Max Height: 20”
• 3/8” thick solid steel base plate for added stability.
Weight: 34 lbs. (15 kg)
• MAXIMUM CAPACITY 22 TONS (44 Ton per Set)
Tire Sling
• Works from the end of the truck boom and is used to depress
or push back the bead seat band and flange ring for fast and
#90200
easy removal of locking ring on OTR/Earthmover 5 piece rims
OTR/Earthmover tires .
• Standard unit fits 25” through 51” rims.
• Fits all Boom Truck Cranes
(Some May Need Slight Modification)
• Meets OSHA requirement and acts
as a tire inflation cage when left
in position during the inflation of
earth mover tires.
• Weight: 65 lbs. (29 kg)
#90300
• Designed to lift the rim base from the tire,
remove the bead seat band from the tire, or
aid in the seating of the bead seat band
during inflation.
• Features 4-point chain hook assembly.
• Easily attaches to the boom.
• 21,600 lb. capacity.
• 5,400 lb. capacity per chain.
• Weight: 34 lbs. (15 kg)
Bead Hooks
• Fits all truck mounted tire cranes. • Angle of tool won’t allow tire to slip off when lifting.
• Heavy duty, rugged construction. • Prevents bead damage.
• Contour of hook same as tire bead.
#10437 Specifications:
10626 Female Coupler with Female Threads (Parker Coupler interchangable with IMT 10,000 PSI
Quick Connect Tools)
Sold Per Case (12 per case) Sold Per Case (4 bags per case)
Application
#10446 • Welded base and cylinder to assure strength and eliminate leaks.
• Chrome-plated pump piston and ram for added rust resistance.
• Extension screw gives added height when necessary.
• Meets ANSI/ASME PALD standards & CE/GS.
• Return Springs for Faster descent.
Min. Height Max. Height Weight
9 5/8” 18 3/4” 35 lbs. (16 kg)
#10858
22 Ton Jack
• Welded base and cylinder to assure
strength and eliminate leaks.
• Chrome-plated pump piston, and ram
for added rust resistance.
• Self-retracting.
• Meets ANSI/ASME PALD standards &
CE/GS.
Min. Height Max. Height Weight
8 1/4” 20 3/4” 90 lbs. (41 kg)
#10448
#10864
#10866
10 Ton Rams
• Used to break beads on the back of 5 piece mover wheels
• Perfect for construction, heavy rigging and moving
• A “Must” for all earth mover tire trucks
#10887-10891
10820 “Economy” Bead Breaker Kit 10821 “Economy” Bead Breaker Kit
10895 “Economy” Bead Breaker 10895 “Economy” Bead Breaker
10604 8’ Hose 10604 8’ Hose
10875 5 Quart Plastic Reservoir Pump 10877 5 Quart Metal Reservoir Pump
#10877
#10875
10822 Giant Bead Breaker Kit 10823 Giant Bead Breaker Kit
10896 Giant Bead Breaker 10896 Giant Bead Breaker
10604 8’ Hose 10604 8’ Hose
10875 5 Quart Plastic Reservoir Pump 10877 5 Quart Metal Reservoir Pump
Model # Lifting Weight Standard Low Stage Raised Height Raised Height Raised Height Max
Capacity Extentions Height 1 Stage 1 Stage 2 Stage 3 Height**
10769 25T/10T 126 lbs. (57 kg) (3)* 7” 3.6” 4” N/A 14.6”
10770 50T/25T 136 lbs. (62 kg) (3)* 8.3” 3.8” 3.5” N/A 15.6”
10771 50T/25T/10T 143 lbs. (65 kg) (3)* 5.5” 2.2” 2” 2.2” 11.9”
10773 35T 135 lbs. (61 kg) (3)* 14.17” 9.84” N/A N/A 24”
* 3 Saddles: 7/8”, 1 3/4”, and 4” ** Maximium Height Without Saddles
ESCO maintains an in-house repair facility in Brooksville, Florida. To insure that our customers have
as little down-time as possible, we offer a 1 day turnaround service.
Our factory repair service is equipped with all the tools and machinery needed to
repair our equipment quickly and affordably. Our trained technicians are the best in the industry. Not
only do we service our own products, but we also service our competitors' products.
If you have a bead breaker, ram, or hydraulic pump that needs repair, ESCO fixes your product
with factory parts and guarantees the repair. In addition to servicing ESCO brand products, we also
repair CP, IMT, Elrick, Branick, Goodyear, FEC, and Haltec lines of bead breakers,
rams and hydraulic pumps.