Professional Documents
Culture Documents
5110 InjectionCleaner 17.0 en
5110 InjectionCleaner 17.0 en
Injection Cleaner
Description
Highly effective combination of active agents for
cleaning and protection. This product is formulated in
accordance with the latest standard of fuel and addit-
ive technology and meets the requirements of today's
engines, fuels and running conditions. Suitable for all
gasoline fuel injection systems such as K, KE and L-
Jetronic systems, etc.
Properties
- cleans the injection system Available pack sizes
- reduces pollutant emissions 300 ml Can sheet metal 5110
- removes carbon deposits from the intake valves and D-F-NL
in the combustion chamber
300 ml Can sheet metal 2522
- optimum dosage
D-E-P
- cost-effective due to exact dosage
- guarantees low fuel consumption 300 ml Can sheet metal 2822
- tested for turbochargers and catalytic converters DK/N-S-FIN
300 ml Can sheet metal 1803
Technical data GB-GR-I
Odor charakteristisch / 300 ml Can sheet metal 1971
characteristic D-PL-BG
Color / appearance gelb / yellow 300 ml Can sheet metal 1918
D-F-I
Form flüssig / liquid
300 ml Can sheet metal 8361
Flash point 63 °C
GB-ARAB-F
Density at 15 °C 0,806 g/cm³
300 ml Can sheet metal 8376
Viscosity at 40 °C 2,0 mm²/s D-H-RO
300 ml Can sheet metal 1993
Areas of application D-RUS-UA
For rectifying problems such as difficulties with start- 300 ml Can sheet metal 2124
ing, irregular idling, poor throttle response, perform- D-GB-E
ance losses, surges due to lean mixture and poor ex-
haust values caused by contaminated injection sys- 300 ml Can sheet metal 2786
tems. Repeat treatment if problems reoccur. Suitable GB-AUS
for all gasoline injection systems. 300 ml Can sheet metal 2902
GB-HEB
Application 300 ml Can sheet metal 7128
One 300 ml can is sufficient for up to 70 liters of fuel. ALGERIEN-GB-ARAB-F
This product is effective over 2,000 km. The additive
300 ml Can sheet metal 20686
can be mixed with fuel at any time since mixing is
D-GB-CN
spontaneous.
300 ml Can sheet metal 20804
D-GB-SLO-SRB-HR
300 ml Can sheet metal 20867
JP
50 l Drum sheet metal 5113
D-GB
195 l Drum sheet metal 4036
D-GB
Injection Cleaner