Professional Documents
Culture Documents
Rewrite in Rectangular Form Homework Help ENG BL 09062017
Rewrite in Rectangular Form Homework Help ENG BL 09062017
Question:
The answer:
To rewrite the function set in the parametric form into the rectangular form we have to rewrite in the
form y ( x) . The expressions for x and y can be represented as x x(t ) and y y (t ) . Now we
can rewrite it so that we could eliminate the parameter t from the expressions x(t ) and y (t ) . The
obtained values for the parameter t are equalized and the obtained equality is then brought to form
y f ( x) .
From the expression x(t ) e2t we will determine t according to the following procedure:
x(t ) e2t
now we logarithm left and right side with natural logarithm to solve the
bases of potentials e 2t
ln( x(t )) ln(e2t )
now we get
ln( x(t )) e 2t
1
multiply the left and right sides with
2
1 1
ln( x(t )) 2t
2 2 finally we have the result for parameter t
1
t ln( x(t ))
2
We should add the obtained value to y y (t ) and we would immediately get the expression containing
y and x and the parameter t no longer existed.
However!!! Here the expression for y y(t ) e1 is not dependent on parameter t and has a constant
value for any parameter t value.
Thus, by eliminating the parameter t from one expression and substituting in another expression of the
thus obtained parameter t , we can not get the expression y ( x) in rectangular form.
That's why we use another approach. We will show the table where we will determine the values for
x(t ) and y (t ) for the given parameter values t . For the parameter values t we will only take some
characteristic values, eg t 0; t 1; t 1; t ; t .
x x(t ) e2t
y y (t ) e1
0 e 20 e0 1 1
e 1
e
1 1 1
e2( 1) e2 e 1
e2 e
1 e 2( 1) e 2 1
e 1
e
1 1 1
e2( ) e
0 e 1
e e
e2( )
e 1
e 1
e
Observing the obtained values for x x(t ) and y y (t ) in the table we can conclude that the values
for x x(t ) range from 0 to , that is, the domain of x(t ) is equal to 0; . We can also see
that the value for y y (t ) is equal to all the values of parameter t from ; and therefore
for all values of x from 0; . Now we can see that the value for y (t ) is not defined for x 0 .
Now we can rewrite our expression in the parametric form into rectangular form as