Professional Documents
Culture Documents
CV3393BH B 10 Specification V1.0
CV3393BH B 10 Specification V1.0
REV: V1.0
EW
LCD TV CONTROL BOARD
SPECIFICATION
I
AV
MODEL : CV3393BH-B-10
AUTHOR :
R
CHECKED BY :
APPROVED BY :
LT
http:// WWW.CULTRAVIEW.COM
H T U U T H
ShenZhen Cultraview Digital Technology CO.,LTD
ITEM
EW
2. GENERAL DESCRIPTION.................................................................................................. 3
3. FEATURES........................................................................................................................... 4
5. ENVIRONMENTAL CONDITION...................................................................................... 7
I
6. SUBSTITUTABLE PRIMARY MATERIALS..................................................................... 8
AV
7. PICTURE............................................................................................................................ 10
8. INTERFACE DEFINITION................................................................................................ 11
9. CONFIGURATION............................................................................................................. 14
R
10. APPLICATION REQUIREMENT.................................................................................... 15
11. EXCURSUS...................................................................................................................... 16
LT
U
2. GENERAL DESCRIPTION
That product is digital & analogue TV board, can receive the NTSC analogue
television and the ATSC digital television. Apply to the North American ATSC
high-definition TV market.
EW
QAM (meet the performance requirements of ITU-J83).
Supports USB 2.0 Multimedia Player;supports audio and video play; supports
picture browse.
I
The largest support various TFT-LCD 1920x1080 resolutions module.
AV
HDMI 1.3/1.4 Compliant; HDCP 1.2 Compliant.
Digital(AC-3)
U
enhancement
3. FEATURES
Type TFT-LCD
PANEL
Resolution Max. 1920X1080
Interface Single/ Double LVDS
Input Impedance 75Ω
Video System NTSC
EW
ATV
M, J, 4.43.
Sound System
BTSC/A2
Input Impedance 75Ω
Bandwidth 6MHz
DTV Modulation ATSC:8VSB QAM:64QAM, 256QAM
Video System MPEG 2 MP@HL
Sound System MPEG 1/ layer 1/AC-3
Sync H: 30-75KHz V: 56-75Hz
I
PC Video Level 0.7Vp-p@75ohm
AV
MODE
AV
Color system
Max 1920X1080@60Hz
PAL/NTSC/SECAM
Video Level 1Vp-p@75ohm
Audio Level 500mV rms
Video Level Y:1Vp-p@75ohm,PbPr:0.7Vp-p@75ohm
YPbPr
Audio Level 500mVrms
R
Format 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
EW
(Divx Need license) AAC
The Max Resolution And
MPEG-2,MPEG-4,H.264 MP2
.mp4 Frame
(Divx Need license) PCM
Rate:1080p@30fps
.mpg MPEG-1,MPEG-2 (AC3 Need
Max Data Rate: 20 Mbps
license)
.mkv / MPEG-1/2/4,H.264,
(DTS Need
.mov (Divx Need license)
license)
Media
The Max
I
MP2
.dat MPEG-1 Resolution:352×288
(AC3 Need
AV license)
(DTS Need
Max Data Rate: 20 Mbps
The Max
.vob MPEG-2 Resolution:720×576
license)
Max Data Rate: 20 Mbps
The Max Resolution And
.rm/ Frame
RV8,RV9, RV10 COOK
.rmvb Rate:1080p@30fps
R
Max Data Rate: 10 Mbps
Max Resolution:
.jpg Progressive JPEG
1024×768
LT
Max Resolution:
.jpeg Baseline JPEG
15360×8640
Max Resolution:
9600×6400
PHOTO .bmg ----
Pixel Depth:
1/4/8/16/24/32 bpp
U
Max Resolution:
Non-Interlaced
9600×6400
.png
Max Resolution:
Interlaced
C
1200×800
.mp3 --- MP3 Sample Rate:
32K~48KHz
.wma --- WMA Bit Rate: 32K~320Kbps
MUSIC
Channel: Mono/Stereo
.m4a / Sample Rate: 8K~48KHz
--- AAC
.aac Bit Rate: 24K~384Kbps
Channel: Mono/Stereo
Note:
1)This product includes the following optional patented technologies : Dolby, DTS,
DIVX, SRS , etc. If you need to use these patented, please provide the patent license to
us, so that the product can meet your requirements . (此产品包括如下可选的专利技术:
EW
DOLBY、DTS、DIVX、SRS 等,如您需要开通这些功能,请提前提供相关专利许可给到
我司,以便产品能满足您的要求。)
I
AV
R
LT
U
C
5. ENVIRONMENTAL CONDITION
EW
AMP POWER +12V +12V--+26V 2A 100mVp-p
The current of panel, Inverter and extension modules are not included in max
current.
Power Up Timing
POWER
I
+5Vstb
HWRESET
AV T1
PWR_ON/OFF T2
+5V
R
T4
+12V
TIME
LT
General materials
Including SMT capacitors, SMT resistors, diodes, transistors, MOSFET, connectors,
common inductance, electrolytic capacitor, PCB etc., and having no obvious
changes in appearance or color. Our company has two or three alternative suppliers
with these materials, maybe we will alternative use these materials for follow-up
EW
mass production due to delivery time, stock or other reasons. We no longer notice
your company the alternative materials used. If necessary, you can apply for using
related materials (mention as above) in samples stage.
(Note: The alternative materials which have been accepted by our materials
confirmation department and PP will enter our system.)
Key materials
Including crystals, LDO , DC-DC, Amplifier, Audio &Video switch, and having obvious
changes in appearance and color of general materials, Our company has two or
I
three alternative suppliers with these materials (See following table for detail),
maybe we will alternative use these materials for follow-up mass production due to
AV
delivery time, stock or other reasons. We will notice your company the alternative
materials used in written form. If necessary, you can apply for using related materials
(mention as above) in samples stage.
Name Main Type Brand Backup Type Brand
BM1117 BM
LDO BL1117 BL
BCD1117 BCD
R
24MHz +-20PPM 20PF
ZG
24MHz +-20PPM HC 49US
RS
20PF HC 49US 24MHz +-20PPM 20PF
TJ
LT
HC 49US
Crystal
16MHz +-10PPM 20PF
RS
16MHz +-10PPM HC 49US
ZG
20PF HC 49US 16MHz +-10PPM 20PF
TJ
HC 49US
U
Core materials
Including FLASH, TUNER, and the materials related to change software. Our
company has two or three alternative suppliers with these materials (See following
table for detail), maybe we will alternative use these materials for follow-up mass
C
production due to delivery time, stock or other reasons. We will notice your company
in written form and we must get your company confirm whether accept before using
the alternative materials.
I EW
AV
R
LT
U
C
7. PICTURE
TOP VIEW
EW
J5: KEY&IR
J6:PANEL POWER
` J8: INVERTER
I
AV
J9: POWER IN
J10:
IIC
J12/J13:
AV&YPBPR INPUT
FRONT VIEW
R
SIDE VIEW:
U
C
ROUT LOUT
EARPHONE COAX USB
AUDIO OUT
8. INTERFACE DEFINITION
EW
2 R- Audio R- Channel Output
3 L- Audio L- Channel Output
4 L+ Audio L+Channel Output
I
3 +12V AMP +12V DC Power Supply
4 +12V
AV
AMP +12V DC Power Supply
J7 LVDS INTERFACE(2×15PIN/2.0)
EW
NO. SYMBOL DESCRIPTION
1 VCC
2 VCC Power Supply For Panel
3 VCC
4 GND Ground
5 GND Ground
I
6 GND Ground
7
8
RXO0-
RXO0+
AV
LVDS ODD 0- Signal
LVDS ODD 0+ Signal
9 RXO1- LVDS ODD 1- Signal
10 RXO1+ LVDS ODD 1+ Signal
11 RXO2- LVDS ODD 2- Signal
12 RXO2+ LVDS ODD 2+ Signal
13 GND Ground
R
14 GND Ground
15 RXOC- LVDS ODD Clock- Signal
16 RXOC+ LVDS ODD Clock + Signal
LT
26 GND Ground
27 RXEC- LVDS EVEN Clock- Signal
28 RXEC+ LVDS EVEN Clock + Signal
29 RXE3- LVDS EVEN 3- Signal
30 RXE3+ LVDS EVEN 3+ Signal
EW
J9.BUILT-IN POWER SUPPLY CONNECTOR(10PIN/2.54)
NO. SYMBOL DESCRIPTION
1 +12V +12V DC Power Supply
2 GND Ground
3 +5V
Main +5V Power Supply
4 +5V
5 P_+5V
I
Panel Power Supply
6 P_+5V
7
8
GND
GND
Ground
AV
9 ON/OFF Power On/Off
10 5VSTB +5V DC Power Supply when Standby
4 Pr YpbPr-Pr Input
5 GND Ground
6 Pb YpbPr-Pb Input
C
9. CONFIGURATION
Board Type :
I EW
AV
R
The thickness of PCB board: 1.6 mm
Component the tallest altitude: 16 mm
Install diameter inside the bore 3.5mm
LT
U
C
EW
attend ESD transaction.
When the whole set assemble, it can down pack or side pack, but don't
make the board transform or distort, don't be subjected to heavy pressure.
The hole of each port does not be opened too small, especially the HDMI
port hole, avoid the whole set morphing to cause the extrusion of port when
installing.
The hole of RGB socket is recommended the situation of not using the
screw stationary on the RGB socket to fix on the structure board.
I
The connected wire which between the other boards and this board can't be
leaded too long, or affect performance and image quality.
AV
The whole set inner wires matching reasonable, each connected wire try to
not directly cross the PCB board, especially cross over from the main IC,
avoid affect the whole set EMC performance.
n order to obtain better EMC effect of the whole set, we suggest the LVDS
twisted pair wire between the main board and panel must be tied up well
and try to use shielding wire. If it’s possible, try to put on the magnetic belt
ring on the wire which near the board terminal.
R
The HDMI and HDCP on the main board are all passed the related
certifications, but we just provide testing certification of the inner usage
standard. If you need to use legal HDMI and HDCP, please apply related
LT
All rights reserve, if the specification has fluctuation and take real object as quasi 15
ShenZhen Cultraview Digital Technology CO.,LTD
11. EXCURSUS
I EW
AV
R
LT
U
C
All rights reserve, if the specification has fluctuation and take real object as quasi 16