Professional Documents
Culture Documents
Agilent 54610B Datasheet
Agilent 54610B Datasheet
Test Equipment Solutions Ltd specialise in the second user sale, rental and distribution of
quality test & measurement (T&M) equipment. We stock all major equipment types such as
spectrum analyzers, signal generators, oscilloscopes, power meters, logic analysers etc from
all the major suppliers such as Agilent, Tektronix, Anritsu and Rohde & Schwarz.
We are focused at the professional end of the marketplace, primarily working with customers
for whom high performance, quality and service are key, whilst realising the cost savings that
second user equipment offers. As such, we fully test & refurbish equipment in our in-house,
traceable Lab. Items are supplied with manuals, accessories and typically a full no-quibble 2
year warranty. Our staff have extensive backgrounds in T&M, totalling over 150 years of
combined experience, which enables us to deliver industry-leading service and support. We
endeavour to be customer focused in every way right down to the detail, such as offering free
delivery on sales, covering the cost of warranty returns BOTH ways (plus supplying a loan
unit, if available) and supplying a free business tool with every order.
As well as the headline benefit of cost saving, second user offers shorter lead times, higher
reliability and multivendor solutions. Rental, of course, is ideal for shorter term needs and
offers fast delivery, flexibility, try-before-you-buy, zero capital expenditure, lower risk and off
balance sheet accounting. Both second user and rental improve the key business measure of
Return On Capital Employed.
We are based near Heathrow Airport in the UK from where we supply test equipment
worldwide. Our facility incorporates Sales, Support, Admin, Logistics and our own in-house
Lab.
- No-quibble parts & labour warranty (we provide transport for UK mainland addresses).
- Free loan equipment during warranty repair, if available.
- Full electrical, mechanical and safety refurbishment in our in-house Lab.
- Certificate of Conformance (calibration available on request).
- Manuals and accessories required for normal operation.
- Free insured delivery to your UK mainland address (sales).
- Support from our team of seasoned Test & Measurement engineers.
- ISO9001 quality assurance.
Email: info@TestEquipmentHQ.com
Web: www.TestEquipmentHQ.com
H
HP 54600-Series Oscilloscopes
• 60/100/150/500 MHz bandwidth
Analog feel and digital power for • Choice of: high sample rates,
4 channels, deep memory, or color
precise, accurate troubleshooting at display models
• Real-time vector display
an affordable price • Automatic measurements
• Pre-trigger viewing, trace storage
• Optional remote control/hard copy
* Maximum bandwidth on CH 1 & 2 is 100 MHz at 1, 2, and 5 mV/div. † Trigger sensitivity from 100 MHz to max. bandwidth.
** HP 54602B, for ranges 1, 2, and 5 mV/div, sensitivity between 25 MHz and †† Maximum bandwidth on CH 1 & 2 is 75 MHz at 1, 2 and 5 mV/div.
100 MHz on CH 1 & 2 is 2 div or 4 mV.
*** Trigger sensitivity from dc to 100 MHz.
3
Vertical System (HP 54600B, 54645A, Horizontal System External Trigger (54610B, 54615B, 54616B/C)
54602B, 54603B) Range Sensitivity ±18V
Cursor Accuracy ± 0.01% ± 0.2% of full
dc to 100MHz: <75mV
Bandwidth Limit ≈ 20 MHz (∆t & 1/∆t) [3] scale ± 200 ps
dc to 500 MHz: <150mV
Inversion CH 1 & CH 2 Delay Jitter 10 ppm Coupling dc and ground
CMRR ≈ 20 dB at 50 MHz 1 ppm (54615B, 54616B/C)
Input R&C 1MΩ, ≈ 12pf or 50Ω
Dynamic Range ± 8 div from center screen Pretrigger Delay ≥ 10 div selectable
(Negative time)
Input R&C 1 MΩ , ≈ 13 pf Maximum Input 250 V (dc + peak ac) or
Maximum Input 400 V (dc + peak ac) Posttrigger Delay at least 2,560 div or 5 Vrms in 50Ω mode
(Trigger to start 50 ms. Not to exceed Trigger View External trigger is viewable.
Math Functions CH 1 + or – CH 2 of sweep) 100 s. (HP 54610B only) Bandwidth is >350MHz
Cursor Accuracy [1][2]
Single Cursor Vert. Acc. ± 1.2% of full Delayed Sweep X-Y Operation
scale, ± 0.5% of position
Main Sweep Delayed Sweep Z-Blanking TTL high blanks trace
value
5 s/div to 10 ms/div up to 200X main (not available on 54615B,
Dual Cursor Vert. Acc. ± 0.4% 5 ms/div and faster up to 2 ns/div
of full scale 54616B/C)
54610B, 15B/16B/16C up to 1ns/div
Bandwidth X & Y same as vertical
system
Vertical System (HP 54610B, 54615B, Trigger System
54616B/C) Phase Difference ± 3 degrees at 100 kHz
Coupling ac, dc, LF reject, HF reject, ± 3 degrees at 10 MHz
Bandwidth Limit ≈ 30 MHz & noise reject. (54615B, 54616B/C)
Inversion CH 1 & CH 2 LF & HF: -3db at ≈ 50 kHz
CMRR ≈ 20dB at 50 MHz Modes Auto, Autolevel, Normal, Display System
Single, & TV
Dynamic Range ± 12 div from center screen Display 7-inch Raster CRT
HP 54645A Glitch Minimum width 8 ns,
Input R&C 1 MΩ, ≈ 9 pf or 50Ω triggering Operators: <, >, or range Resolution 255 vertical by 500
selectable horizontal points
TV Triggering TV line and field. 0.5 div of
Maximum Input 250 V (dc + peak ac) or composite sync for stable Controls Front-panel intensity control
5 Vrms in 50Ω mode display (Ch1 & Ch2) Graticule 8 X 10 grid or frame
50Ω Protection Protects 50Ω load from TV Functions Autostore Autostore saves previous
excessive voltage Line Counting Delay time calibrated in sweeps in half bright
Time Skew Adjustable over a range of NTSC and PAL line numbers display and the most recent
± 25ns to remove effects of sweep in full bright display.
All Field Trigger Oscilloscope triggers on the
cabling vertical sync pulse in both Display (54616C) 5.8 inch Active Matrix Color
(both fields selected,
Probe Sense Automatic readout of 1X, fields, allowing use with LCD Display
54602B and 54610B)
10X, 20X, 50X and 100X noninterlaced video.
probes
Holdoff Adjustable from 200 ns
Math Functions CH 1 + or – CH 2 to ≈ 13 s
Cursor Accuracy [1][2] External Trigger (54600B, 54603B, 54645A)
Single Cursor Vert. Acc. ± 1.2% of full Range Sensitivity ±18V
scale, ± 0.5% of position dc to 25MHz: <50mV
value dc to 100 MHz: <100mV
Dual Cursor Vert. Acc. ± 0.4% Coupling dc, HF reject and noise
of full scale reject
Input R&C 1MΩ, ≈ 13pf
Maximum Input 400 V (dc + peak ac)
4
Acquisition System General Expandable feature set to meet
Power Line Requirements
your changing needs
Simultaneous Channels
HP 54600B/54610B, Channels 1& 2 Line Voltage Range 100 Vac to 240 Vac HP 54600-series oscilloscopes can be
54615B, 54616B Line Voltage Selection Automatic easily and inexpensively upgraded
HP 54602B Channels 1& 2 or 3 & 4 Line Frequency 45 Hz to 440 Hz with add-on modules and software
Record Length 4,000 points Vectors off Max Power 220 VA links to provide advanced analysis
and/or Vectors on capability. Accessories and modules
HP 54615B, 54616B/C 5,000 points Consumption 300 VA (54615B, 54616B/C)
available include:
HP 54645A 1 million points Environmental The instrument meets
Max Update Rate Vectors off: 1,500,000 Characteristics the requirements of MIL-T- • Interface modules for remote
points/sec 28800D for Type III, Class 3, control and hard-copy output to
Vectors on: 60 full Style D equipment as RS-232, HP-IB and parallel printers
screens/sec, independent of described below.
number of waveforms being and plotters. With the addition of
Ambient Temperature these modules, the scope’s two
displayed Operating –10 °C to +55 °C
HP 54615B, 54616B/C 500,000 points/sec Nonoperating –51 °C to + 71 °C trace memories become
HP 54645A 3,000,000 points/sec nonvolatile.
Usable Single-Shot 2 MHz, single channel Humidity [1]
Bandwidth 1 MHz, dual channel Operating 95% RH at 40°C for 24 Hrs • Add FFT capability and unattended
HP 54615B 250 MHz Nonoperating 90% RH at 65°C for 24 Hrs signal monitoring along with the
HP 54616B/C 500 MHz Altitude rest of the basic interface module
HP 54645A 20 MHz Operating to 4,500 m (15,000 ft) benefits. Catching intermittent
Peak Detect 50 ns glitch capture (100 ns Nonoperating to 15,000 m (50,000 ft) failures is easy with unattended
dual channel) at sweep
EMI (Commercial) Meets FTZ 1046 Class B waveform monitoring. The
speeds of 50 µs/div and
greater EMI (MIL-T-28800D) Meets requirements in nonvolatile memory can store up
HP 54615B, 54616B/C 1 ns glitch capture accordance with Paragraph to 100 traces.
HP 54645A 5 ns 3.8.3, EMI Type III, and MIL-
STD-461C as modified by • HP BenchLink Scope software for
Average Number of averages Table XII.
selectable at 8, 64, 256 transferring screen images and
CE01,CE03 Full limits waveform data to Windows
CS01, CS02, CS06 Full limits applications for further analysis or
Advanced Functions
RE01 15 dB relaxation to 20 kHz; to create polished reports and
Automatic Measurements are exceptioned from 20 kHz to presentations. HP BenchLink
Measurements continuously updated 50 kHz
Scope also lets you store
Voltage Vavg, Vrms, Vpp, Vtop, RE02 (With Opt 002) Full limits of class A1c and
Vbase, Vmin, & Vmax
instrument setups.
A1f
Time Frequency, Period, + Width, (Without Opt 002) 10 dB relaxation from Enhanced TV/video trigger
– Width, Duty Cycle, Rise 14 kHz to 100 kHz
Time, & Fall Time RS02 Exceptioned With Option 005, six of the
Cursors Manually or automatically RS03 (With Opt 001) Slight trace shift from HP 54600-series scopes gain the
placed 80 MHz to 200 MHz ability to trigger and perform highly
Setup Functions Vibration Operating: 15 minutes along detailed measurements on the video
Autoscale Sets the vertical and each of the 3 major axes; components of your system. You can
horizontal deflection and 0.025 inch p-p displacement, order this option for HP 54602B,
the trigger level 10 Hz to 55 Hz in one-minute HP 54610B, HP 54615B, HP 54616B/C,
Save/Recall 10 front-panel setups cycles. Held for 10 minutes
at 55 Hz (4 g at 55 Hz). and HP 54645A oscilloscopes. For
Trace Memory Two volatile pixel memories more information about this option,
Shock Operating: 30 g, 1/2 sine,
11 ms duration, 3 shocks request data sheet 5965-1100 EN.
per axis along major axis.
Total of 18 shocks
Size (excluding handle)
Height: 172 mm (6.8 in)
Width: 322 mm(12.7 in)
Depth: 317 mm (12.5 in)
Weight 6.2 kg (14 lbs)
Safety CSA Certification,
IEC 348
UL 1244 listed
Warranty 3 years
[1] Tested to Hewlett-Packard Environmental Specification
Section 758 for Class B-1 products
5
HP 54650A HP-IB Interface Module HP 54652B RS-232/Parallel Interface Cursor Readout Voltage or percentage
Module Modes Time or phase angle
Provides full remote control and hard copy to HP-IB
printers and plotters. Programming is in accordance Provides full remote control via RS-232 and printing Waveform Math Functions
with IEEE 488.2. With the addition of this module, via parallel in one module. The RS-232 can also be Function 1 Addition, subtraction, and
the scope’s two pixel memories become non-volatile. configured for printing when not being used for multiplication
An operating and programming manual and a remote control. Function 2 Differentiation, integration,
programming examples disk are supplied. and FFT
Specifications
Specifications The interface capabilities of Connector Type 9 pin (m) DTE Port, works FFT
the HP 54600 series with HP 34398A RS-232 Windows Exponential, flat top,
oscilloscope with this cable. Hanning and rectangular
module installed are as Samples 1024 points
defined by IEEE 488.1 as Protocols Xon/Xoff, hardwire
SH1, AH1, T5, L4, SR1, RL1, Data Bits 8 Trace Memory up to 100 nonvolatile
PP1, DC1, DT1, C0 and E2. memories
Parity None
Printer/Plotter HP ThinkJet, HP QuietJet, Memories 1 – 3 High speed storage without
Supported HP PaintJet, and HP LaserJet; Baud Rates 1200, 2400, 9600, or 19200 compression.
HP-GL compatible plotters. Printer/Plotter HP ThinkJet, HP QuietJet, Memories 4 – 100 Storage with compression.
Support HP PaintJet, and HP LaserJet; Storage time is approxi-
HP-GL compatible plotters. mately 7 seconds. Number
Specifications of traces that can be stored
Connector Type 25 pin (F) connector, works is a function of complexity,
with HP C2950A parallel with the minimum being 4
printer cable. highly complex traces and
Supported Printers: Epson FX-80 or HP PCL the maximum being 96.
compatible printers. Memory Labeling An onscreen text editor is
provided for creating labels
up to 20 characters. Each
HP 54657A and 54659B Measurement/ label contains the date and
Storage Modules time it was saved.
Real Time Clock 24-hour format with battery
With the the addition of either the HP 54657A back-up. Can be set from
module with HP-IB interface or the HP 54659B front panel.
module with RS-232 and parallel interface, the HP
54600 series oscilloscope will provide all of the Unattended Waveform
following features. Monitoring
Testing Method Comparison to waveform
19 Automatic Measurements consisting of: mask.
Voltage Vamp, Vavg, Vrms, Vpp, Number of Masks 2
Vpre, Vovr, Vtop, Vbase,
Vmin, and Vmax Mask Generation Automask, controlled from
and Operation the front panel, generates
Time Delay, Duty Cycle,
Frequency, Period, Phase mask from displayed
Angle, Rise Time, Fall Time, waveform with selectable
+ width, and - width tolerance. Mask editor
function allows pixel-by-
Thresholds User selectable among pixel editing and line
10%/90%, 20%/80%, or drawing. Smoothing
absolute voltage levels. function performs a running
average of 3 pixels.
6
10442A fine pitch probe 10070A rugged probe
7
Ordering Information For more information on
Hewlett-Packard Test and
HP 54600-Series Oscilloscopes
Measurement products, applications
HP 54600B Two-channel, 100 MHz Oscilloscope or services please call your local
HP 54602B Four-channel, 150 MHz Oscilloscope Hewlett-Packard sales offices. A
HP 54603B Two-channel, 60 MHz Oscilloscope current listing is available via the
Each of the above oscilloscopes comes with two 1.5 meter 10X Web through AccessHP at
probes (HP 10071A), a user’s and service guide, and power cord. http://www.hp.com. If you do not
HP 54610B Two-channel, 500 MHz, 20 MSa/s Oscilloscope have access to the internet, please
HP 54615B Two-channel, 500 MHz, 1 GSa/s Oscilloscope contact one of the HP centers below
HP 54616B Two-channel, 500 MHz, 2 GSa/s Oscilloscope and they will direct you to your
HP 54616C Color two-channel, 500 MHz, 2 GSa/s Oscilloscope nearest HP representative.
HP 54645A Two-channel, 100 MHz, 200 MSa/s Oscilloscope United States:
Each of the above oscilloscopes comes with two 1.5 meter 10X Hewlett-Packard Company
probes (HP 10073A), a user’s and service guide, and power cord. Test and Measurement Organization
23 Inverness Way East
Options Englewood, CO 80112
Opt. 001 RS-03 Magnetic interface shielding added to CR 1 800 452 4844
Opt. 002 RE-02 Display shield added to CRT to reduce radiated interface
Canada:
Opt. 005 Enhanced TV/video triggering (not HP 54600B/03B) Hewlett-Packard Canada Ltd.
Opt. 090 Delete probes (for HP 54600/02/03B) 5150 Spectrum Way
Opt. 090 Delete probes (for HP 54610B, 54615B, 54616B/C) Mississauga, Ontario
Opt. 101 Accessory pouch and front panel cover (HP 10098A) L4W 5G1
Opt. 102 Two additional HP 10071A probes (HP 54602B only) (905) 206 4725
Opt. 103 Operator training kit (includes training signal board & lab workbook) Europe:
Opt. 104 Carrying case (protects scope for shipping or baggage checking) Hewlett-Packard
Opt. 106 HP BenchLink Scope software for Windows (HP 34810B) European Marketing Centre
P.O. Box 999
Opt. 1CM Rack Mount Kit (P/N 5062-7345) 1180 AZ Amstelveen
Opt. W50 Additional 2-year warranty (5-year total), starting at The Netherlands
Manual options (please specify one) Japan:
ABA US English ABF French ABJ Japanese Hewlett-Packard Japan Ltd.
ABD German ABZ Italian AB1 Korean 3-29-21 Takaido-higashi
ABE Spanish ABO Taiwan Chinese Suginami Ku
Tokyo 168, Japan
HP 54650-series enhancement modules Tel: (81-333) 31-6111
HP 54650A HP-IB interface module Fax: (81-333) 35-1478
HP 54652A Parallel interface module Latin America:
HP 54652B RS-232 and parallel interface module Hewlett-Packard
HP 54655A HP-IB test automation module (compatible only with 54600/03/02/10B) Latin American Region Headquarters
HP 54656A RS-232 test automation module (compatible only with 54600/03/02/10B) 5200 Blue Lagoon Drive, 9th Floor
HP 54657A HP-IB measurement/storage module Maimi, FL 33126 U.S.A.
(305) 267 4245 /4220
HP 54659B RS-232 and parallel measurement/storage module
Each module includes user’s and programmer’s guides; HP 54656A Australia / New Zealand:
includes HP 98561-61604 RS-232 adapter cable and one 2-meter RJ-45 cable. Hewlett-Packard Australia Ltd.
Modules with product numbers ending in “A” are compatible with HP 54600A-series and HP 54600B-series scopes. Modules ending 31-41 Joseph Street, Blackburn
in “B” are compatible with the HP54600-B-series only. The HP 54620A logic analyzer can use any of these modules, but it uses the Victoria 3130, Australia
modules for I/O only. 131 347 Ext. 2902
Additional oscilloscope accessories, probes and terminations Asia Pacific:
HP 10070A 1:1 probe Hewlett-Packard Asia Pacific Ltd.
HP 10071A 10:1 probe 17-21/F Shell Tower, Time Square
1 Matheson Street, Causeway Bay
HP 10072A SMT probing adapters Hong Kong
HP 10073A 10:1 500 MHz probe with readout (852) 2599 7070
HP 10074A 10:1 150 MHz probe with readout
HP 10442A 10:1 GHz probe for 50 Ω inputs. Within Budget.
HP 10444A 10:1 500 MHz mini-probe with readout Without Compromise.
HP 1137A 1000:1 high-voltage probe Technical data subject to change without notice.
HP 10100C 50 Ω feedthrough termination HP BenchLink is a trademark of
HP 5081-7690 HP 1007X probe accessory kit Hewlett-Packard Company.
HP 5081-7705 HP 1007X probe-to-BNC (m) adapter Microsoft® WindowsTM and MS-DOS are registered
HP 10098A Front panel cover and pouch kit trademarks of Microsoft Corporation.
HP 34327A Inverter, 12 Volt dc to 115 V ac Copyright © 1996
Hewlett-Packard Company
HP 34810-Series BenchLink Software Printed in the U.S.A. 8/96
HP 34810B BenchLink Scope Software 5964-9339 EN
Includes software on 3.5” disk, user’s guide. (all languages)
HP-IB or RS-232 module needed for connection to scope.