Professional Documents
Culture Documents
Enlace David A Jhonatan
Enlace David A Jhonatan
Enlace David A Jhonatan
Summary
Link Name Cabina to Emisor
Profile Type Line-of-Sight
Equipment Type PTP670
Maximum Obstruction 0 meters
Link Distance 3.688 kilometers
Free Space Path Loss 119.03 dB
Excess Path Loss 0.00 dB
User IP Throughput Expectation Aggregate Aggregate 451.27 Mbps assuming PTP-670 Series
running the 670-02-00 software
RF Frequency Band 5.8 GHz (5725 to 5850 MHz)
RF Channel Bandwidth 45 MHz
Path Profile
3885 3885
Cabina Emisor
Height Above Sea Level (meters)
3880 3880
3875 3875
3870 3870
3865 3865
3860 3860
3855 3855
3850 3850
3845 3845
3840 3840
3835 3835
3830 Cambium Networks - LINKPlanner 3830
3825 3825
0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3 3.2 3.4 3.6
Range on path (kilometers)
Page 1 of 6
Project Untitled 1 - Link Cabina to Emisor LINKPlanner version 4.7.2 Installation Report
Link Configuration
Precise Network Timing Disabled
Bandwidth 45 MHz
E1/T1 None
Optimization IP
Sync Disabled
Symmetry Adaptive
Dual Payload Enabled
Highest Mod Mode 256QAM 0.81
Lowest Ethernet Mode BPSK 0.63 Sngl
Master Cabina
Slave Emisor
Bill of Materials
Part Number Qty Description
01010419001 6 Coaxial Cable Grounding Kits for 1/4" and 3/8" Cable
C050067H010 2 PTP 670 Integrated 23dBi END with AC+DC Enhanced Supply (ROW - U.S. Line
Cord).
Kit includes ODU, power supply, mounting bracket and US line cord
WB3176 1 328 ft (100 m) Reel Outdoor Copper Clad CAT5E (Recommended for PTP)
Page 2 of 6
Project Untitled 1 - Link Cabina to Emisor LINKPlanner version 4.7.2 Installation Report
Page 3 of 6
Project Untitled 1 - Link Cabina to Emisor LINKPlanner version 4.7.2 Installation Report
Regulatory Conditions
Country Argentina (Private)
Band 5.8 GHz
Region Code 44
Max EIRP 50.0 dBm
Output Power 27.0 dBm
Installation Instruction
Perform the following checks during the installation (Check the deployment guide and the User Guide.)
1. Check with a GPS that you are installing at the correct location.
2. Check carefully the direction to the other end of the link. Either use a corrected compass or use the GPS
waypoint feature about 300 meters from the installation location.
3. When aligning antennas, it is important to find the centre of the main beam. This is done by adjusting the
antenna at each end of the link in turn and monitoring the receive level until the peak is found. Once the
peak level is found, it should be checked against the prediced receive power to ensure that the antennas
have not been aligned on a side lobe.
4. An hour after disarm check that the mean value for the link loss is as predicted (119.05 dB ± 5.00 dB).
Also check that the received power is not greater than -35dBm.
Cabina Performance *
Mean IP Throughput Predicted 225.64 Mbps
Mean IP Throughput Required 5.00 Mbps
Minimum IP Throughput Required 1.00 Mbps
Minimum IP Throughput Availability Predicted 100.0000% (unavailable for 0 secs/year)
Emisor Performance *
Mean IP Throughput Predicted 225.64 Mbps
Mean IP Throughput Required 5.00 Mbps
Page 4 of 6
Project Untitled 1 - Link Cabina to Emisor LINKPlanner version 4.7.2 Installation Report
Page 5 of 6
Project Untitled 1 - Link Cabina to Emisor LINKPlanner version 4.7.2 Installation Report
Cambium Networks assumes no responsibility for the accuracy of the information produced by the Cambium LINKPlanner. Reference to
products or services which are not provided by Cambium Networks is for information purposes only and constitutes neither an endorsement
nor a recommendation. All information provided by the Cambium LINKPlanner is provided without warranty of any kind, either expressed or
implied.
All product or service names are the property of their respective owners. © Cambium Networks. 2018
Page 6 of 6