Professional Documents
Culture Documents
En 10305 en 10296
En 10305 en 10296
Delivery Conditions
Welded and Cold Sized +CR2 Not intended for heat treatment after the welding and sizing
process
Chemical Composition
Mechanical properties
Appearance
Internal and external surface finish shall be typical of manufacturing process. It shall be such that
any imperfections such as ridges, dents, or shallow grooves requiring dressing can be identified.
After grinding or machining, the dimensions are within specified tolerances, all dressed areas shall
blend smoothly into the contour of the tube.
External weld bead shall be removed flush with the surface. Internal weld bead shall not be
removed, unless Option 3 is specified.
Option 3: The internal weld bead shall be limited to a specified height or be removed.
Internal Soundness
NDT of the weld seam of the full tube circumference for the detection of longitunal imperfections by
using one or more of the following methods (11.7.1)
Outside Diameter
Tolerance: ±0.15mm
Thickness
Length
Straightness
For OD> 15mm, deviation from straightness shall not exceed 0.002L,
Inspection
EN 10296-1
Method of Starting Forming Delivery Symbol for delivery
manufacture Material Operation Condition condition
Cold rolled As welded b c +U
Electric welded (EW) Cold formed As welded b d +CR
strip
b
An appropriate heat treatment of the weld zone is permitted
c
An as welded product from which the +N properties can be achieved after heat treatment
d
An as welded product from which the +N properties may not achieved after heat treatment.
Chemical Composition
Appearance
Tubes shall be free from external and internal surface defects that can be established by visual
examination
After grinding or machining, the dimensions are within specified tolerances, all dressed areas shall
blend smoothly into the contour of the tube.
Soundness
When option 5(Eddy current and option 6 is specified
Outside Diameter
Tolerance: ±0.15mm
Thickness
Length
Straightness
For OD> 15mm, deviation from straightness shall not exceed 0.002L,