Professional Documents
Culture Documents
Directions Carapa 4
Directions Carapa 4
out stocking fronts from panel fabric (or use our pattern to cut four fronts from your fabric).
tocking fronts over (wrong side up) and use as pattern to cut four stocking backs (backs are cut opposite to fronts) 3. U
g front as a pattern to cut 4 lining pieces and 4 fusible fleece pieces.
now have 4 stocking fronts and 4 stocking backs cut opposite to stocking fronts.
have 4 linings and 4 linings cut opposite. You will have 4 fusible fleece pieces and 4 more cut opposite.
agrams below.
out your four stocking fronts, wrong side up. Trim 1/4" off the top of each fusible fleece stocking piece. Pin a fusible fleec
o each stocking front, adhesive side down, so that the fusible fleece piece is lined up with the lower stocking edges (to
king fabric does not have fusible fleece). Turn pieces over and iron. Fusible fleece will adhere to wrong side of stocking
w have four fronts with fusible fleece on wrong side, and four stocking backs with fusible fleece on wrong side.
out all pieces, right side up. Place a lining piece over each piece (lining is against right side of stocking front). Stitch aro
XCEPT top, using 1/4" seam.
front pieces right side out. Use turning tool or blunt end of crochet hook or similar object to help push out seams. Press.
open. Repeat with back pieces.
under upper raw edges of front pieces, all the way around, and press. Pin top opening closed. Top stitch across top, cl
g.
w have four front pieces and four back pieces, finished all the way around.
ch stocking: fold a 3" piece of ribbon in half and place it so that the raw edges line up with the outer edges of the stoc
The loop will point up toward the upper straight edge of the stocking. Pin ribbon in place.
Above: ribbon