Professional Documents
Culture Documents
Skema Jawapan Fizik Kertas 3 Tingkatan 4 Peperiksaan Sumatif 1 2018
Skema Jawapan Fizik Kertas 3 Tingkatan 4 Peperiksaan Sumatif 1 2018
(c) i) -0.06 2
ii)
Bilangan pensel, n Diameter pensel, d (cm) Diameter sebenar, D (cm)
2 1.14 1.20 4
4 2.08 2.14
6 3.24 3.30
8 4.48 4.54
10 5.72 5.78
M1 – All physical quantities is recorded in table.
M2 – All unit for physical quantities is correct.
M3 – All data for each column has no decimal places.
(d)
A - Label y-axis and x-axis correctly
B - States the unit at the axis correctly
C - Both axes with the even and uniform scale
D - 6 points correctly plotted:
-at least 3 points correctly plotted 5
E - a smooth best straight line
F - minimum size of the graph is 5 x 4 squares of 2 cmx 2 cm.
7 - 5 marks
6-5 - 4 marks
3-4 - 3 marks
2 - 2 marks
1 - 1 marks
(e) D berkadaran terus dengan n 1
Total 16
2 (a) 7N 1
Tunjukkan garis mencancang atau mendatar sepadan 1
pada kertas graf.
(b) Jisim / daya geseran 1
(c) a bertambah 1
(d) Melukis satu segitiga (min 4 x 5) Gantian yang betul 1
M = y2-y1
x2-x1
= (35-10) 1
(9-1) 1
= 3.13 N/ms-2
(ii) Tunjukkan garis mencancang atau mendatar sepadan 12
pada kertas graf.
a = 2.20 ms-2
(ii) F menaik secara linear terhadap a
(d) Jisim 1
(e) The position of the eye is perpendicular to the scale of metre rule to avoid parallex 1
error.
SOALAN 4
ANSWER MARK
(a) The period of oscillation depends on length of the pendulum 1
(b) When length increase, the period also increase 1
(c)(i) To investigate the relationship between the period the length 1
Manipulated : length
(c)(ii) 1
Responding : period of oscillation
Gravitational acceleration, g. 1
Retort stand with clamp, 100 cm of thread, bob,
(c)(iii) meter rule, 2 blocks of clamp wood, protractor and 1
stop stopwatch
(c)(iv) 1
l/ cm T/ s
60.0
(c)(vi) 50.0 1
40.0
30.0
20.0
(c)(vii) 1
TOTAL 12
SOALAN 4
(c) (i) To investigate the relationship between the mass and the period of oscillation.
(iii) Apparatus : hack-saw blade, G-clamp, stop watch, plasticines with different mass.
Radas: bilah gergaji besi, pengapit-G, jam randik, plastisin yang berlainan jisim.
(iv)
(v) – The hack-saw is clamped onto the foot of table. One end of the hacksaw blade is attached with a
mass, m.
Bilah gergaji besi diapit pada kaki meja. Hujung bilah gergaji besi dilekat dengan beban, m.