Test Standard Heat Exchanger Design

You might also like

Download as xlsx, pdf, or txt
Download as xlsx, pdf, or txt
You are on page 1of 3

Input Parameter's

Air Flue Gases


Mass flow rate
Inlet Temp.
Outlet Temp.
Inlet Cp
Outlet Cp
Inlet Temp Viscosity
Outlet Temp Viscosity
Inlet Density
Outlet Density
Inlet Thermal Conductivity
Outlet Thermal Conductivity
Inlet Prandtle No.
Outlet Prandtle No.
Assumed Value's
Assumed Overall heat transfer cofficient
Assumed nominal bore dia of tube
Assumed Thickness of Tube
Assumed inner dia of tube 0
Assumed outer Dia of Tube 0
Assume Length of Tube
Pitch of tube
Baffle Spacing

Avg Air thermal Conductivity 0


Avg Flue gases Thermal conductivity 0
Shell dia 0
thermal conductivity of tube material
Calculated Parameter's Tube Side
Total heat of air 0
Total heat of Flue gases 0
L.M.T.D #DIV/0!

Number of tube
Velocity of flue gases in Tube
Tube Inner heat transfer cofficient
Tube Inner Convective Resistance #NAME?

Calculated Parameter's Shell Side

Area of mass flow rate #DIV/0!


Velocity of air #DIV/0!
Shell heat transfer cofficient #DIV/0!
Shell Convective Resisance #NAME?

Conductive resistance #DIV/0!

Calculated Overall Heat transfer Cofficient #DIV/0!


Assumed Overall heat transfer cofficient 0
Rounded Numbers of tubes

You might also like