This document outlines 8 steps to simulate a radar system in Matlab, including updating antenna and target positions, generating and transmitting pulses, propagating pulses to targets, collecting echoes, and forming a data cube. It also notes that most simulation components can be found in Matlab libraries but some may need to be written from scratch.
This document outlines 8 steps to simulate a radar system in Matlab, including updating antenna and target positions, generating and transmitting pulses, propagating pulses to targets, collecting echoes, and forming a data cube. It also notes that most simulation components can be found in Matlab libraries but some may need to be written from scratch.
This document outlines 8 steps to simulate a radar system in Matlab, including updating antenna and target positions, generating and transmitting pulses, propagating pulses to targets, collecting echoes, and forming a data cube. It also notes that most simulation components can be found in Matlab libraries but some may need to be written from scratch.
2. Update target position (range and angle) 3. Generate and transmit pulse 4. Radiate towards target 5. Propagate pulse 6. Reflect off target 7. Collect echoes 8. Form data cube The radar system schematic
Each component has to be created on matlab – most can be found on in libraries some have to be written from scratch.