Professional Documents
Culture Documents
Calibration Interval 1
Calibration Interval 1
Calibration Interval 1
0
Calibration Frequency for Instruments/Gauges
10 mm ± 8µm
25 mm ± 10µm
50 mm ± 12µm BS 4311 Part 1 :1993 (Grade 2)
75 mm ± 15µm
100 mm ± 18µm
± 1% of reading or ± 1°C for Tmeas > 0°C (32°F) Manual Book Raytek MM Series
Maximum Error :
0.000" - 5.000" ± 0.0002"
5.000" - 10.000" ± 0.0004" BM-WI-5.7.25(clause 5.3.4)
10.000" - 15.000" ± 0.0006"
15.000" - 20.000" ± 0.0008"
> 20.000" ± 0.0010"
Readout Unit
± 0.025% of reading
As per manufacturers Specified Tolerance
Sensor Head
Beter than ± 5%
± 0.0002" BS 907:2008
Maximum Error :
0" - 12" ± 0.001" BS 887:2008
> 12" to 24" ± 0.0015"
> 24" ± 0.002"
Length vs Tolerance (inches)
1 ≤ 6 ± 0.0002"
7 ≤ 12 ± 0.0004" BS 959:2008
13 ≤ 18 ± 0.0006"
19 ≤ 24 ± 0.0008"
0 to 8 ± 0.00005" BS 870:2008
8 to 24 ± 0.0001"
Limit of error for dial with scale division of 0.001 in & 0.0005 in
Maximum
Measuring permissible Reference
error in Calibration Frequency
Range Standard
length (in)
Table 4.0
External Micrometer
Size of
setting Max Error in length Reference Calibration Frequency
Standard
gauge
2 to 5 ± 0.0001
6 to 8 ± 0.0001
9 to 11 ± 0.00015
12 to 17 ± 0.0002
18 to 23 ± 0.00025
Table 5.0
Vernier Caliper
Measuring Maximum
permissible error in Reference Calibration Frequency
Range Standard
length (in)
0 to 12 ± 0.001 - 4 (four) Month
12 to 24 ± 0.0015 BS 887:2008 - When gage is dropped or subjected to unusual shock
> 24 ± 0.002 - An others condition which might affect the accuracy of the gage
Table 5.0
MICTRAC
Maximum
Measuring permissible error in Reference Calibration Frequency
Range Standard
length (in)
0 to 5 ± 0.0002 - Annualy
5 to 10 ± 0.0004 As per - When installing a new display unit
10 to 15 ± 0.0006 manufacturers
Specified
15 to 20 ± 0.0008 Tolerance
> 20 ± 0.001