Professional Documents
Culture Documents
Structural Design Basis PDF
Structural Design Basis PDF
GENERAL GUIDELINES
Structural design basis starts with the type of structure to be designed. For any
structural design to commence, we require certain data. These data includes
information about type of structure, site conditions, loading conditions, type of
environmental exposure, earthquake zone and wind zone.
Site Conditions:
1. Dead Loads:
Dead Loads are loads from the self weight of the structural members such as
beams, columns, slabs, wall, finishing, plastering etc. Any stationary elements
or equipments which may be permanently positioned on the structure shall also
be considered as dead load. Dead loads are also called as self weight and is
calculated as volume multiplied by its unit weight. Unit of different materials are
provided by the standard codes.
2) Live Loads:
Live loads also called as imposed loads are probable loads that the structure
may be subjected to during occupancy. These are loads which are moving or
dynamic in nature and may or may not be present on the structure during
intended use of the structure. For example, for an industrial structure, loads
from people, maintenance tools etc. can be called as live loads, while loads from
equipments which are stationary at a location is considered as the dead load.
Live loads are different for different types of structures and varies with type of
occupancy. For example, for a residential building, live load on floor is
considered as 3 kN/m2 while for industrial structures or business centers live
loads can be taken as 4 or 5kN/m2. These loads vary for different structures
based on intended use.
Minimum live loads to be considered for design purpose are obtained from
respective standard codes based on country or region. ASCE 7 Provides live
minimum live loads for buildings and other structures in USA. While in India,
IS875 Part-2 provides guidelines for minimum live loads.
For design of any structure, in live loads should be considered based on future
expansion plans and all the probabilities of loads which the structure may
experience during its lifetime, should be considered.
3. Wind Loads:
Wind loads are horizontal loads on the building which are exerted on the surface
area of the building on windward side. This load is calculated based on the wind
zone which provides the maximum wind speed in the given zone. This can be
obtained from the wind map of the location. This wind speed is converted into
force based on the surface area and orientation of building w.r.t. wind direction.
Shape of the building is or structural member is also considered for calculation.
Wind loads is considered only on those structural members are exposed to the
wind or which resists the wind. The guidelines for calculation of wind force on
structure is provided by ASCE 7-95 / UBC -1997 /IS 875 : 1987 (Part 3) / BS
CP3 : Chapter V : Part2 : 1972 or whichever applicable codes shall be
considered based on the location of the building or structure.
Design of Structures:
Structural design methods are selected based on the local practices. Working
stress method, Limit State Method, Load Resistance Factor Design method.
These are the methods used for the design of structural members and are
guided by the relevant standard code of practice.
These are only few points, many other factors should also be considered which
may be relevant for the design. A checklist for different types of structural
design should be maintained and followed to prevent any error during design
and detailing for buildings and other structures.