Professional Documents
Culture Documents
Design and Diagram by Beth Johnson
Design and Diagram by Beth Johnson
Design and Diagram by Beth Johnson
1. Begin with a square and make a 2. Fold and unfold. 3. Fold and unfold.
pinch halfway along the right side
and the top.
4. Fold and unfold. 5. Bring the two corners together, 6. Make a fold that connects the
but do not crease. Make two small lower left corner with the midpoint
pinches where indicated. along the right side, and make a
pinch where it crosses the pinch
made in step 5. Repeat on other
side, connecting lower left corner
with crease along top edge, but only
crease along pinch from step 5.
1.
7. The result. These are 1/8 8. Fold and unfold, making the 9. Fold and unfold.
sections. In the next several steps, creases between the intersection of
you will divide these 1/8 sections the pinches made in steps 5 and 6.
into thirds. Turn paper over and
rotate it 1/4 turn clockwise.
10. Fold and unfold. 11. Fold and unfold. 12. Fold and unfold.
13. The result. Turn paper over and 14. Fold and unfold, but only crease 15. Fold and unfold, but only crease
rotate 1/4 turn clockwise. where indicated. Do not crease where indicated. Do not crease
through the pleats made in steps through the pleats made in steps
2-12. 2-12.
2.
16. Fold and unfold, creasing only 17. Fold and unfold, creasing only 18. Make crimps for eyes. Paper will
between the two folds made in steps between the two folds made in steps not fold flat.
14 and 15. 14 and 15.
19. The result. Turn model over and 20. Crimp pleat. 21. Crimp pleat.
rotate 1/4 turn clockwise.
1
3
4 2
22. Crimp pleats, alternating sides. 23. Turn paper over, and rotate 1/4 24. Fold and unfold. There are
turn clockwise. three layers of paper, fold two.
3.
25. Squash fold. 26. Fold and unfold. Again, you 27. Squash fold.
will fold two layers.
28. Collapse model, folding all 29. You will have four flaps inside 30. After locking all four flaps,
four sides inward. that should like the flap above. the model should look like this.
Make a valley fold to lock the flap. Turn model around.
Repeat on the remaining three flaps.
4.
Front: Side: Back:
5.