Professional Documents
Culture Documents
Sor PDF
Sor PDF
17 Digging out of HT (11/ 3.3 kV) cable of all sizes from ground and re-filling Mtr NA
the earth.
18 Removal of HT (11/ 3.3 kV)cables from Trench/Trays/ pipes structure Mtr NA
etc.
19 Digging and removal of old damaged cable in ground & laying of new Mtr Yes
cable.
20 Removal /Re-laying of HT cable (11/ 3.3 kV) from / in ground as desired Mtr NA
by the Engr. in charge.
21 Removal / Re-laying of HT cable (11/ 3.3 kV) from / in trench/ trays/ pipe Mtr NA
structure etc.
22a Straight through / end jointing with heat shrinkable kit. 11KV (UE) / 3.3 KV No. Yes
(UE) grade.
22b Straight through / end jointing with epoxy kit. 11KV (UE) / 3.3 KV (UE) No. Yes
grade.
23 Laying of HT cable (11 kV) as per specifications.
a Alongwith wall, in trench or on trays. Mtr. NA
b Underground with supply of brick lining. Mtr. NA
24 Painting of poles (HT) .(Paint in contractor's scope) No. NO
25 Digging out/removal of poles from concrete foundation alongwith stay set No. NA
wherever applicable.
26 Erection of pole (supply NFL's scope) No. NA
27 Erection of stay sets as per specifications. No. NO
28 Rectification of stay sets as per specifications. No. NO
29 Erection/replacement of cross arms on the pole. No. NO
30 Rectification ofcross arms on the pole. No. NO
31 Replacement of 132 kV LA, CT or PT. No. Yes
32 Replacement of 132 KV jumpers. No. Yes
33 Cleaning/ checking of one stack of insulator of MOCB, CT, PT, LA, No. NO
Transformer bushing, isolator in 132 kV switch yard.
34 Cleaning of radiator tubes of HT motors in plant. Contractor's technician No. Man day
shall strictly follow all safety precautions as per instructions of NFL's
supervisor. All materials like round brushes etc in the scope of the
contractor.
35 Replacement of 132 kV insulator stack. No. Yes
36 Attending fault / tightening / checking of 132 kV LA, CT,PT, jumpers or No. Yes
insulator stack.
37 Cleaning/ checking for any abnormality of one stack of string / suspension No. NA
/ strain type insulators on 132 kV towers.
38 Attending fault in 5A/15A socket, switch, plug top etc point incl. tightening
of connections, replacement of socket or switch as required.
38a Attending fault in 5A/15A socket, switch, plug top etc incl. tightening of No. NA
connection in socket or switch as required.
38b Replacement of 5A/15A socket, switch, plug top etc incl. tightening of No. yes
connections as required.
48a Attending fault in light point ,rectification,tightening of connections, etc. wherever No. NA
reqd.
48b Replacement in light point incl. any or all the components like holder, bracket, No. yes
switch, shade or their rectification etc. wherever reqd.
49a Rectification of fault of bell/buzzer. Incl. wire lead tightening etc. No. NA
49b Replacement of bell/buzzer incl. any or all the components likeBell, Buzzer, switch, etc. No. yes
wherever required.
50 Rectification of fault in Heater/Hot plate incl. repair or replacement of any or all the
components like element, plug top, wirelead and tightening of connections, taping etc. as
per requirement.
50a Rectification of fault in Heater/Hot plate incl. repair of any or all the components like No. NA
element, plug top, wirelead and tightening of connections, taping etc. as per requirement.
50b Replacement in Heater/Hot plate incl. any or all the components like element, plug top, No. yes
wirelead and tightening of connections, taping etc. as per requirement.
53b replacement in telephone circuits as required including telephone sets, rossets,field DB / No. Yes
Junction box etc.
54 Cleaning of light fixtures of all types, lamp shades/ Hylem sheets of any No. NA
size, incl.removal & refixing of cover/louvres etc.
55 Rectification of fault in Heat Convector/ Geyser incl. replacement of No. yes
element (supply in NFL's scope), thermostat, wireleads, bushes, washers,
gaskets etc (supply in contractor's scope) repair or replacement
exculding rewinding of motor for heat convector and excluding plumbing
work in case of Geyser.
56 Replacement in public buildings/ offices of :-
a Lamps of all sizes No. yes
b Tubes rods 20/40/65 Watts , LED tube fittings18/36Watts No. yes
57 Renovation of ceiling/wall mounted tube light fitting, replacement of tube No. yes
rods,starter chokes, Holders, condensor, incl.tightening of connections,
etc. wherever necessary,in public building / plant offices.
63 Removal /re-fixing and to and fro safe transportation to factory complex No. NA
and back of Energy Meter including taping of all wires.
64 Removal / Replacement, to and fro transportation (factory to township or No. NO
within township), refixing , cleaning and trial run of ceiling fan/ kitchen fan/
Air circulators/ Exhaust fans or any other single phase induction motor.
65 Removal, refixing, painting and to and fro transportation of ceiling fan No. NA
(paint in contractr's scope) as per specs.
66 Overhauling of ceiling fans incl.greasing and replacement of bearing, No. yes
capacitor, removal, refixing, cleaning & giving its satisfactory trial run.
67 Attending fault in ceiling fan, checking and Replacement of split pins, No. NO
rubber bush, etc as per requirement and cleaning of ceiling fans.
68 cleaning and checking for abnormality of ceiling fans incl removal, No. NA
complete dismantling, checking of all parts for their integrity incl bush /
bearing, assembly, refixing and taking trial run.
69 Painting of numbers & letters on ceiling fans/ pannels/ DBs/ Poles/light
fittings etc. as required. Paint brush & stencil etc.to be supplied by
contractor. Paint will be approved by Engineer -in-Charge.
72b do WASP (7/4.39mm), ANT (7/3.10) and earth wire. span yes
73a Jointing /repair of broken all Aluminium conductor COCKROACH span NA
(19/4.22mm).
73b do WASP (7/4.39mm), ANT (7/3.10) and earth wire. span NA
74 Dismantling of LT O/H Lines. Span NA
75 Replacement of cage guard on LT Lines. No. yes
76 Repair, rectification of cage guard on LT Lines. No. yes
77 Digging out/removal of pole including stay wire, cross arms, insulators etc No. NA
from concrete foundations.
78 Erection of Stay Sets as per specifications and tightning of connections. sets yes
a2 Alongwith wall, pole or in trench including proper clamping etc. (In Mtr. NA
case of laying in trench, removal and replacement of slabs before and
after the job is to be done by the contractor.) Cable size above 95 to
240mm2
a3 Alongwith wall, pole or in trench including proper clamping etc. (In Mtr NA
case of laying in trench, removal and replacement of slabs before and
after the job is to be done by the contractor.) Cable size above 240 to
400mm2
b1 Underground with supply of brick lining Cable size up to 95mm2 Mtr NA
d2 Laying under ground in RCC/PCC covered area (6-8 Inch thick) including Mtr NA
making good and restoring to original cable size above 95 to 240mm2
d3 Laying under ground in RCC/PCC covered area (6-8 Inch thick) including Mtr NA
making good and restoring to original cable size above 240 to 400mm2
e1 Laying of cable by chipping in wall/ PCC floor upto a depth of 3 inches. Mtr NA
Laying and fastening of cable by catcher etc. Providing cement, making
good and restoring to oiginal incl supply of all meterials.cable size up to
95mm2
e2 Laying of cable by chipping in wall/ PCC floor upto a depth of 3 inches. Mtr NA
Laying and fastening of cable by catcher etc. Providing cement, making
good and restoring to oiginal incl supply of all meterials.cable size above
95 to 240mm2
e3 Laying of cable by chipping in wall/ PCC floor upto a depth of 3 inches. Mtr yes
Laying and fastening of cable by catcher etc. Providing cement, making
good and restoring to oiginal incl supply of all meterials.cable size above
240 to 400mm2
f Removal & replacement of Trailing Cables of EOT cranes/Paddle feeders Mtr yes
drives etc. as per scope.
g Laying of UTP cable on wall, pole, columns, structure etc in PVC pipe Mtr yes
(3/4" dia) incl proper clampimg etc. Cable will be supplied by NFL; All
other materials like PVC pipe, clamps, saddles etc in contractor's scope.
95 Removal of cable from Trench / Trays / pipe structures.(Removal & Mtr yes
replacement of slabs etc. before & after the job is to be done by the
contractor. Cable to be rolled on to drum and transported as desired by
the Engr-in-charge.
96 Dressing and clamping of LT cable on Trays/walls up to 10 cables per Mtr. NA
tray. Supply of materials like clamps, nylon thread and civil & welding jobs
will be in the scope of the contractor.
97a Removal and replacing of cable trench covers up to trench of width 1 mtr. No. NO
97b Removal and replacing of cable trench covers up to trench of width above No. NO
1 mtr.
98 Complete checking and cleaning of switches on LT panels incl. Bus- No. NO
duct
99 Replacement of Star-Delta starter upto any kW Motor. Removal of old No. NO
one and burnt parts, if any, disconnection/ connection of cables, earth
connections, insulation taping, proper contacts tightening etc. as
required and approved by Engineer-in-Charge. Any civil or
welding job reqd shall be in the scope of the contractor.
104a Supply and erection of earth pit as per IS:3043 - 1966, including No. NO
supply of GI pipe 40 mm dia, 2.5 mtr. long, charcoal, salt etc. to make a
complete earthing system.
104b Supply and erection of earth pit as per drawings in detail specs and other No. NO
specs as per IS:3043 - 1966, including supply of GI pipe 100 mm dia,
3.8 mtr. long, charcoal, salt etc. to make a complete earthing system.
104c Supply and erection of earth pit in RCC/PCC covered area (6-8 Inch thick) No. NO
including making good and restoring to original as per drawings in detail
specs and other specs as per IS:3043 - 1966, including supply of GI pipe
100 mm dia, 3.8 mtr. long, charcoal, salt etc. to make a complete earthing
system.
104d Modification of existing small sized earthing pits as per IS:3043-1966 ID No. No
600mm , depth 400mm, and width 125mm
105 Testing and Maintenance of earth pit as per detail scope No.
106 Painting of junction boxes/DB/ Tel.boxes etc.(Paint must be ISI Marked Sqmr NO
as appd.by Engr. -in-Charge and to be supplied by the contractor.( 1
coat of primer & 2 coat of paint will be done).
107 Painting of motors with epoxy paint.
a size 0 - 22 kW No. NO
b size 23 - 160 kW No. NO
c size 161 kW and above No.
108a Laying, fixing & termination of 6/8 SWG G.I. wire / Al. strip (NFL's Mtr NO
scope)of any size in existing RCC walls/tray or any other structures, etc.
incl. Supply of hardware like clamps, bolts etc.and related civil & welding
jobs (Contractor's scope)
108b do underground Mtr NO
109 Wiring for light point with 1.5 sq.mm.PVC insulated Cu conductor cable.
a Below 20 Kg No. NA
b Above 20 Kg up to 50 Kg No. NA
c Above 50 Kg but below 100 Kg No. NA
d LT motors upto 3.7 KW No. NA
e do above 3.7 KW to 15 KW No. NO
f Shifting of 200 Ltrs. oil drums No. yes
g Shifting of Grease gun bucket No. NA
132 Pulling of cable over the cable tray in trench or pipe to bring out margin at
the end for its re-termination.
a Pulling up to length of 50 mtr for cable sizes upto 3/3.5x70 sq.mm. No. NA
b --do-- but 150 mtr size -do- No. NA
c Pulling upto length of 50 mtr of cable size upto 3/3.5x95 to 3/3.5x185 sq No. NA
mm.
d -do- but 150 mtr size -do- No. NO
133 Cleaning of s/stn blower filter in 3.3KV, 11KV, 415V and PCC rooms Manday NO
including removal of filters, steam washing and refixing at site. Steam at
suitable place will be provided by NFL.
134 Cleaning of battery bank. Topping up with distilled water and application Manday NO
of petroleum jelly on battery terminals and taking readings of cell volatge
and sp gravity and recording the same.
135 Cleaning of Capacitor banksas per site requirement . Manday NO
136 Cleaning of panels in substationsas per site requirement Manday NA
137 Cleaning of transformers in s/stns as per site requirement. Manday NO
138 Cleaning of cable tray of all sizes with water spray and wire brush etc Manday NO
as per site requirement.
139 Cleaning of cable trench from including cleaning of cables with water Manday NO
spray and removing mud from trench and dewatering of trench etc as per
site requirement.
140 Cleaning of LT motors of all sizes in plant as per plant requirement. Manday NO
141 Cleaning of duct of pressurisation blower in Sub station as per site Manday NA
requirement.
142 Cleaning of HT motors of all sizes in plantas per plant requirement. Manday yes
143 Cleaning, rinsing shifting of transformer oil drums, pipe connections with Manday yes
oil filter machine, sampling etc as per site requirement.
144 Cutting and cleaning of burnt winding of motors in elect workshop. Manday NA
144 a Cleaning of smoke detectors ,pill boxes and panels of Fire Alarm system Manday NA
150a Earthwork in excavation not exceeding 1.5 Mtr in width or 10 sq mts on Cu Mtr No
plan including dressing of sides and ramming of bottom lift upto 1.5 Mtr
including getting out the excavated soil and disposal of surplus soil as
directed.
150b Filling available excavated earth in trenches, plinth, sides of foundation etc Cu Mtr No
in layers not exceeding 20 cm in depth. Consolidating each deposited
layer upto 50 Mtr and lift upto 1.5 Mtr.
150c Cutting Bituminous portion of Road and making good the same including Cu Mtr No
supply of extra quantities of materials I.e.aggregate, Moorum screening,
red bajri etc and labour rquired.
150d Demolishing cement concrete incl disposal of material within 50 Mtr lead. Cu Mtr No
150e Providing and laying in position cement concrete of specified grade incl Cu Mtr No
the cost of centring & shuttering - All work upto plinth level.
151 Removal of celling Fan/Exhaust fan/cabin fan/ Tube lighting ( 1 Rod or 2 No. No
rod both)
152 Supply of Straight through jointing Suitable for 11Kv (UE) system with
heat shrinkable kits of Raychem make for XLPE/PILCA cable. Jointer shall
be trained and hold valid certificate from Raychem. Supply of joint as
well as all other materials in the scope of the contractor
152 a1 Suitable for 3 core cable (XLPE) size 95 to 185 mm2 No. No
152 a 2 Suitable for 3 core cable (PILCA) size 95 to 185 mm2 No. No
152 b1 Suitable for 3 core cable (XLPE) size 240 to 300 mm2 No. No
152 b2 Suitable for 3 core cable (PILCA) size 240 to 300 mm2 No. No
152c Siutable for cable (XLPE) size 1 X 400 mm2 No. No
153 Supply of End jointing Suitable for 11Kv (UE) system with heat shrinkable
kits of Raychem make for XLPE/PILCA cable. Jointer shall be trained and
hold valid certificate from Raychem. Supply of joint as well as all other
materials in the scope of the contractor
153 a1 Suitable for 3 core cable (XLPE) size 95 to 185 mm2 No. No
153 a2 Suitable for 3 core cable (PILCA) size 95 to 185 mm2 No. No
153 b1 Suitable for 3 core cable (XLPE)size 240 to 400 mm2 No. No
153 b2 Suitable for 3 core cable (PILCA) size 240 to 400 mm2 No. No
153c Suitable for cable size 1 X 400 mm2 No. No
154 Supply of Straight through jointing Suitable for 3.3Kv (UE) system with
heat shrinkable kits of Raychem make for XLPE/PVC cable. Jointer shall
be trained and hold valid certificate from Raychem. Supply of joint as
well as all other materials in the scope of the contractor
154a Suitable for 3 core cable size 95 to 150 mm2 No. No
154b Suitable for 3 core cable size 185 to 400 mm2 No. No
155 Supply of End jointing Suitable for 3.3Kv (UE) system with heat shrinkable
kits of Raychem make for XLPE/PVC cable. Jointer shall be trained and
hold valid certificate from Raychem. Supply of joint as well as all other
155a Suitable for 3 core cable size from 120 to 240mm2 No. No
155b Suitable for 3 core cable size from 300 to 400mm2 No. No
156a Dressing of already laid LT cable upto size of 11 pair in PVC pipes/ Mtr. No
Cassing -capping.( All material Like PVC pipe,Cassing-capping
,Saddle, surews, plastic gitti etc. in the scope of contractor.
156b Dressing of already laid Telephone cable upto size of 16mm square Mtr. No
in PVC pipes/ Cassing -capping.( All material Like PVC pipe,Cassing-
capping ,Saddle, surews, plastic gitti etc. in the scope of contractor
Total
Note - 1. Parties are required to quote item wise workable rates, however evaluation of bid shall be done on o
Estimated Rate (In Rate
Amount
Qty. Fig.) (InWords.)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
20
47
22
20
20
20
20
86
1
1
1
1
1
1
2
2
512
143
1
75
1034
9000
2000
747
220
1500
739
811
446
213
96
2500
6000
1000
5000
2000
1400
350
800
400
207
2500
4000
2000
3500
298
300
300
300
236
94
2050
1292
127
74
580
232
110
69
370
580
1187
2910
1
1
58
356
238
1
5
1
2
2
181
6
7
20
1
329
80
1058
1794
128
122
68
2
1
3
3
1
1
1
1
20
5
1
4801
2209
2114
31403
7511
20
527
5000
2000
500
2000
1000
250
80
20
15
72
40
24
126
400
2500
3000
1061
750
28
14
202
10
5
20
10
950
1
1
1
1
20
20
300
134
219
100
27
77
70
1
40
21
152
27
117
30
36
122
1664
538
300
200
75
47
757
490
1
100
350
400
200
100
30
40
240
123
20
20
845
80
1
1
125
31
119
1
1
1
1767
1562
1022
524
311
93
838
182
85
52
69
228
349
251
1484
629
877
461
946
205
426
6
278
150
224
146
63
63
144
143
1344
3584
276
739
122
1
1
1
1
1
1
1
1
1
1
1
1
1
1
500
500
1
1
1
1
1
1
1
1
1
1
1
1
1
1
150
1650
100