Professional Documents
Culture Documents
Catalog A 1 Filter Driers - 42015
Catalog A 1 Filter Driers - 42015
climate control
electromechanical
filtration
fluid & gas handling
hydraulics
pneumatics
process control
sealing & shielding
Filter-Driers
OFFER OF SALE
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are
governed by the provisions stated in the detailed “Offer of Sale” elsewhere in this document or available at www.parker.com.
Table of Contents
Filter-Driers
Liquid Line Filter-Driers
Introduction to Filter-Driers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Copper Service Filter-Driers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Cu LLD® Series Solid-Core Copper Filter-Driers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Gold Label™ Liquid Line Filter-Drier (LLD Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
White Label Sahara Series™ Liquid Line A/C Filter-Driers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Sahara Series™ Liquid Line Filter-Driers (SS Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Gold Label™ Bi-Flow Filter-Driers (BF Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
White Label Sahara Series™ Bi-Flow Filter-Driers (SSBF Series) . . . . . . . . . . . . . . . . . . . . . 12
Suction Line Filter-Driers
Gold Label™ Suction Line Filter-Driers (SLD Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
White Label Sahara Series™ Suction Line Filter-Driers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Replaceable Core Shells, Cores and Element
Replaceable Core Filter-Drier Shells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Replacement Filter Element and Cores . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Recovery and Reclaim Filters and Pre-Filters
PF Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
SPD Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Accessories - PRD-3 Series Oil Vapor Drier Separator
Steel Muffler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
OEM Components
Loose-Fill Copper Filter-Driers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Loose-Fill Spring-Loaded Copper Filter-Driers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
CBF Bi-Flow Copper Filter-Driers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Transcritical Carbon Dioxide Filter-Driers (CO Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Hydrocarbon Optimized Filter-Driers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Terms of Sale With Warranty Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Page 2 / Catalog A-1, Filter-Driers
Introduction to Filter-Driers
The function of a filter-drier in a refriger- many years. This moisture can cause result from an oxidation reaction of the
ation system is to remove contaminants freeze-ups and corrosion of metallic lubricant (from air left in the system) or
that are harmful. If these contaminants components. Moisture in the system can if the thermal stability of the lubricant
remain at elevated levels, they will hydrolyze the POE lubricant, forming is exceeded for a period of time from an
jeopardize the longevity of the system. organic acids. These acids, if they exist improper operating system.
Contaminants that are frequently found in significant quantity, will react with
include moisture, acid, copper oxides, materials within the system and can ad- Activated alumina is the desiccant of
metal chips, wax-like compounds and versely affect component operation. To choice if added acid capacity is desired
others. prevent the formation of these acids, the in the filter-drier. Many of the copper
moisture must be minimized. This is ac- spun filter-driers referenced in this cat-
Selecting a filter-drier for a particular complished by the use of a filter-drier alog are made with a 100% molecular
application requires various technical that utilizes molecular sieve and acti- sieve formulation and are not equipped
factors to be considered. These factors vated alumina. with activated alumina. This is often all
include the type of system, connecting that is required for the type of system
line size, water capacity, flow capacity Molecular sieves are crystalline sodium where they are used, since they mini-
(size of system), filtration capability, alumino-silicates (synthetic zeolites) mize the potential of hydrolysis reac-
acid capacity, material of construction having cubic crystals which selectively tions of the lubricant and/or refrigerant.
(steel vs. copper), and design pressures. adsorb molecules based on molecular Copper filter-driers are designed with
Evaluation of each factor is necessary size and polarity. The crystal structure a molecular sieve to achieve the maxi-
to ensure proper and economical filter- is honeycombed with regularly spaced mum water capacity because they are
drier design. cavities or pores. Each of these cavi- typically smaller than the steel counter-
ties or pores are uniform in size. This part and need this capacity. However,
Parker has developed filter-drier recom- permits molecules, such as water, to be copper spun filter-driers are available
mendations based on current technical adsorbed, while allowing other larger with molecular sieve/activated alumina
data, as well as many years of actual molecules, such as the refrigerant, lubri- formulations if desired.
field experience. Products are tested cant and acids to pass by. The surface of
for flow and water capacity using the the desiccant is charged positively with For steel shell filter-driers, catalog prod-
American Society of Heating, Refrig- cations, which act as a magnet and will ucts often utilize a molecular sieve/ac-
eration and Air Conditioning Engineers therefore adsorb polarized molecules, tivated alumina formulation appropriate
(ASHRAE) Standard 63.1 and are rated such as water, and hold them tightly on with current system chemistries. These
for use based on the Air Conditioning, the structure. products come standard with this desic-
Heating and Refrigeration Institute’s cant blend because these products often
guideline AHRI-710. Data obtained Acid Removal find numerous applications in service
from this testing is shown in the capaci- Refrigerants by themselves are very where the type and amount of con-
ties tables for liquid line filter-driers and stable, even when heated to a high tem- taminants are unknown. For these ap-
can be used for comparison purposes. perature. However, certain conditions plications, filter-driers with a blend of
However, other factors must be consid- do occur which can result in the forma- molecular sieve and activated alumina is
ered for various types of equipment. tion of acids. The reaction of refriger- advantageous.
ants with water may cause hydrolysis
Moisture Removal and the formation of hydrochloric and Filtration
The ability to remove moisture from a hydrofluoric acids. These acids are usu- Scale, solder particles, metallic fines
refrigerant system is a primary function ally present as a gas in the system and and all types of foreign substances must
of the filter-drier. Moisture can come are highly corrosive. In ordinary usage be removed to protect the compressor,
from many sources such as trapped this reaction is negligible, but in a very solenoid valves, expansion valves, cap-
air from improper evacuation, system wet system operating at abnormally illary tubes and other close tolerance
leaks, and motor windings, to name a high temperature, some hydrolysis may parts of a refrigeration system.
few. Another source is due to improper occur.
handling of polyolester (POE) and poly- The solution to system filtration is the
vinyl ether (PVE) lubricants, which are Another significant source of acid- use of a filter-drier. The filter-drier can
hygroscopic; that is, they readily absorb ity in refrigeration systems is organic be constructed in two different formats
moisture. POEs and PVEs can pick up acid formed from lubricant breakdown. to perform this function. The filter-drier
more moisture from their surround- As previously discussed, this can be can be a spring load desiccant design
ings and hold it much tighter than the the by-product of the hydrolyzed lu- that utilizes multiple layers of a fibrous
mineral oils which have been used for bricant. However, organic acids can media that captures the circulating
Catalog A-1, Filter-Driers / Page 3
Introduction to Filter-Driers
particulate. The alternate design (always complex applications, including systems Information regarding operating pres-
used in large systems) is a molded core with less pressure fluctuations and lower sure is required to adequately size the
made with a specific desiccant formu- vibration tendencies. Some smaller sys- wall thickness of the filter-drier to attain
lation. The desiccants are sized and tems do not require high filtration capa- the ultimate burst pressure, for both
bonded in such a way that the useable bilities; however, some of the smaller copper and steel. In accordance with
shape provides the filtration. The large systems using the new refrigerants Underwriters Laboratories (UL), the
particles are caught on the surface of the will require better filtration. In order to burst pressure is rated as five times the
core and the smaller solids are captured meet these requirements, a molded core design working pressure of the system,
as the refrigerant channels through the construction and filter-driers with addi- or three times the design working pres-
desiccant core. tional fibrous media and screen should sure of the system when evaluated using
be considered. Also, copper is typically the fatigue stress test outlined in UL
Steel vs. Copper the most economical option for smaller 1995. Typically, for copper filter-driers,
The major differences in using steel vs. systems. Because copper driers are used the design working pressure can be cor-
copper filter-driers are the system sizes for smaller applications, the refriger- related to tube diameter and wall thick-
and applications. Copper filter-driers are ant charge required will generally be ness to meet specific UL specifications.
normally used in 5 ton and smaller, less smaller than in the steel filter-drier.
MMS-200
Applications Working psi: 700
■■ Air conditioning, heat pump, and small
refrigeration systems 712
Working psi: 500
Note: For models 319F and 1638F, the “F” represents UL fatigue qualification, not flare fittings.
Page 4 / Catalog A-1, Filter-Driers
Recommended Tonnages / kW
U.L.
Part No. R-134a R-404A, R-502, R-507 R-22 R-410A
Model No.
Tons kW Tons kW Tons kW Tons kW
MMS-80 058070-01 1/3 1.17 1/4 0.91 1/2 1.76 1/2 1.80
MMS-100 058198-01 1/3 1.17 1/4 0.91 1/2 1.76 1/2 1.80
MMS-200 032134-01 3/4 2.64 1/2 2.05 1 3.52 1 3.60
712 032092-01 1/3 1.17 1/4 0.91 1/2 1.76 1/2 1.80
319F 032144-01 1 3.52 3/4 2.73 2 7.03 2 7.20
619 032142-01 1/3 1.17 1/4 0.91 1/2 1.76 1/2 1.80
620 032133-02 1 3.52 3/4 2.73 2 7.03 2 7.20
621 032143-01 1 3.52 3/4 2.73 2 7.03 2 7.20
1638F
032145-00 4 14.1 3 10.94 4 14.1 4 14.41
(Formerly CO73S)
Installation Recommendations
Nominal Ratings in Tons (kW)
Refrigeration Air Conditioning
Commercial Low Temp. Equipment OEM, Self-Contained/Field Replacement
Model No.
R-404A, R-407C,
R-134a R-22 R-404A, R-507 R-134a R-22, R-410A
R-507A
Tons kW Tons kW Tons kW Tons kW Tons kW Tons kW
Cu LLD 3-2S 3/4 2.6 3/4 2.6 1/2 1.8 1-1/2 5.3 1-1/2 5.3 1 3.5
Cu LLD 3-3S 1-3/4 6.1 1-1/2 5.3 1-3/4 6.1 3-1/2 12.3 3 10.5 2-1/2 8.8
Cu LLD 5-3S 1-3/4 6.1 1-1/2 5.3 1-3/4 6.1 3-1/2 12.3 3 10.5 2-1/2 8.8
Cu LLD 8-3S 2 7.0 1-1/2 5.3 1-3/4 6.1 3-1/2 12.3 3 10.5 2-1/2 8.8
Cu LLD 16-3S 2 7.0 1-1/2 5.3 1-3/4 6.1 4 14 3-1/2 12.3 2-1/2 8.8
■■ Spring loaded, molecular sieve and rated for 500 psig (34.5 bar).
activated alumina ■■ UL Listed under SMGT/SMGT7-SA1756
B B
A A
Page 8 / Catalog A-1, Filter-Driers
Dimensions
Cutout Overall
Model No. ODF Solder
Length “A” Length “B”
(ODF Solder) (Inches)
Inches mm Inches mm
SS-053S 3/8 3.25 83 4.39 112
SS-083S 3/8 4.13 105 5.27 134
SS-163S 3/8 4.75 121 5.92 150
Note: For additional performance capacities, specify the Parker Gold Series Filter-Driers (page 7).
ODF Solder
A
Page 10 / Catalog A-1, Filter-Driers
■■ Desiccant core provides reliable and ■■ 600 psig (41.4 bar) MRP C US
LISTED
effective removal of solid contaminants, ■■ UL Listed under SMGT/SMGT7-SA1756
acid and moisture
A
■■ Core is cushioned in fiber gaskets to
protect core and to ensure trouble-free
performance
D
Dimensions
B
System System System C
U.L. Shell
Fitting Cutout Cutout Cutout
Model Part Diameter Flow Direction Flow Direction
Size Length Length Length
Number Number “D”
(Inches) “A” “B” “C”
ODF Solder Inches mm Inches mm Inches mm Inches mm
SSBF083S 450224-001 3/8 6.09 155 4.10 104 5.27 134 2.50 64
SSBF163S 450225-001 3/8 6.75 171 4.75 121 5.92 150 2.50 64 Cooling Mode Heating Mode
The core material has controlled porosity which effectively removes and holds a
maximum amount of contaminants with a minimal pressure drop. In addition, the
core material collects and holds acids and other harmful contaminants present after SLD-8
a motor burnout. SLD-27
Access valves make it easy to measure pressure accurately. The SLD-8 and SLD-27
each have one access fitting. The SLD-13 and SLD-15 each have two access fittings.
Occasionally, enough contaminant matter may collect in the filter core to cause a SLD-13
slight pressure drop. SLD-15
A
A
B
B
SLD 54 Model
SLD 27 Model
Page 14 / Catalog A-1, Filter-Driers
For other applications or air conditioning systems where uniquely higher capacities
C US
are desired, the Parker Gold Label Premium SLD molded core suction line filter- LISTED
driers are suggested.
Parker recommends the Gold Label Premium SLD Series for both refrigeration and air
conditioning applications when both acid and moisture removal is desired.
Page 16 / Catalog A-1, Filter-Driers
The internal assembly allows the use of Parker’s Z-48, PCX-48, PCK-48 or PCK-
48HH molded cores for the removal of moisture, acid, particles, resins and wax. The
assembly allows the use of the Parker PFE-48BF filter element which removes solid
contaminants such as copper oxides, chips and other metal fines.
Tie Rod
(3 Required)
Nut
(8 Required)
Shell
Gasket, Outlet
Retainer Plate
Page 18 / Catalog A-1, Filter-Driers
HP kW HP kW HP kW HP kW
P485 1 5/8 ODF 10 7.5 10 7.5 3 2.2 5 3.7
P487 1 7/8 ODF 10 7.5 10 7.5 3 2.2 5 3.7
P489 1 1-1/8 ODF 10 7.5 20 14.9 5 3.7 10 7.5
P4811 1 1-3/8 ODF 10 7.5 20 14.9 5 3.7 10 7.5
P4813 1 1-5/8 ODF 10 7.5 20 14.9 5 3.7 10 7.5
P967 2 7/8 ODF 10 7.5 10 7.5 5 3.7 5 3.7
P969 2 1-1/8 ODF PCK-48HH 15 11.2 20 14.9 8 6.0 10 7.5
P9611 2 1-3/8 ODF or PFE-48BF 20 14.9 30 22.4 10 7.5 15 11.2
P9613 2 1-5/8 ODF PCK-48 20 14.9 30 22.4 10 7.5 15 11.2
P1449 3 1-1/8 ODF 15 11.2 20 14.9 7-1/2 5.6 10 7.5
P14411 3 1-3/8 ODF 25 18.6 35 26.1 12 9.0 15 11.2
P14413 3 1-5/8 ODF 25 18.6 35 26.1 12 9.0 15 11.2
P19211 4 1-3/8 ODF 25 18.6 40 29.8 12 9.0 20 14.9
P19213 4 1-5/8 ODF 25 18.6 40 29.8 12 9.0 20 14.9
P19217 4 2-1/8 ODF 25 18.6 40 29.8 12 9.0 20 14.9
Page 20 / Catalog A-1, Filter-Driers
PF Series
The PF 052 and PF 052MF are designed to provide a filtration level of 15 microns.
When installed on the inlet of your machine it can prevent costly damage by filtering
C US
solid contaminants out of the refrigerant before it enters your machine. The Parker LISTED
pre-filter is for temporary use only and should be changed after servicing a maxi-
mum of six to eight systems. Change out may be needed sooner depending on actual
system conditions. Various fitting combinations are available.
Dimensions
Part Inlet Fitting Outlet Fitting Overall Length Shell Diameter
Model
Number (Inches) (Inches) Inches mm Inches mm
PF 052 450098-001 1/4 SAE male flare 1/4 SAE male flare 4.38 111 2.38 60.5
PF 052MF 450099-001 1/4 SAE male flare 1/4 SAE female flare 5.02 128 2.38 60.5
SPD Series
The SPD series is an enlarged version of the PF Series with drying capabilities.
This Super Pre-Filter-Drier should be installed at the inlet of the machine and used C US
where there are concentrations of contaminants in the refrigerant. Moisture capacity LISTED
of this unit size exceeds anything else currently available in the market. The Super
SPD series is the ideal solution when transferring large amounts of refrigerant for
reclaim or recycle.
Dimensions
Part Inlet Fitting Outlet Fitting Overall Length Shell Diameter
Model
Number (Inches) (Inches) Inches mm Inches mm
SPD-162 450190 1/4 SAE male flare 1/4 SAE male flare 8.00 203 2.50 63.5
SPD-162MF 450189-001 1/4 SAE male flare 1/4 SAE female flare 8.64 219 2.50 63.5
SPD-163 450195 3/8 SAE male flare 3/8 SAE male flare 8.44 214 2.50 63.5
302V 450202 7/16-20 ACME 7/16-20 ACME 9.28 236 3.00 76.2
304V 450209 7/16-20 ACME 7/16-20 ACME 9.28 236 3.00 76.2
The 302V and 304V are slightly bigger shells when compared to the SPD for additional water capacity.
Catalog A-1, Filter-Driers / Page 21
Steel Muffler
Parker’s aftermarket steel muffler (P/N: PM3083-5-4C) is designed to assist with
compressor related difficulties, such as noise reduction due to compressor pulsation
and/or turbulent gas flow or vibration through the discharge line.
Features
■■ Made in the USA
■■ 600 psig (41.4 bar) MRP
■■ 1/2” ODF Solder
C US
■■ Fully welded construction
LISTED
■■ Bi-directional flow
■■ Powder coated paint gives maximum corrosion resistance of 500 hour salt spray protection
■■ Muffler utilizes 3.0 inch (76.2 mm) diameter shell and is 9.13 inches (232 mm) in length
■■ UL Listed under SOJV/SOJV7-SA5915
Page 22 / Catalog A-1, Filter-Driers
Applications
■■ Refrigeration systems between 1/4 and 2 ■■ Up to 30 grams of 100% molecular sieve
tons (.9 to 7.0 kW) provide maximum water adsorption
■■ Filter-driers also available with stan-
Features and Benefits dard charging tubes, SAE flare fittings,
■■ Made in the USA stepped-tubes on the inlet/outlet, and
coiled capillary or bent tubing to match
■■ One-piece copper shells in 3/4" to 1" the unique requirements of a unit Inlet Outlet
O.D. (19.1 to 25.4 mm), spun ODF solder
connections in a variety of sizes, provide ■■ UL Recognized under SMGT2/SMGT8- Recommended tonnages: 1/4 to 2 tons (.9 to 7.0
easy installation, simple brazing, and SA1756 kW) depending on application and system.
corrosion resistance Consult Parker.
3/4" O.D. Shell Diameter – Water Capacity In Drops (Grams*) at AHRI-710 Conditions
Water Capacity in Drops
Part No. R-22 (60 ppm) R-134a (50 ppm) R-404A, R-507 (50 ppm) R-407C (50 ppm) R-410A (50 ppm)
75°F (24°C) 125°F (52°C) 75°F (24°C) 125°F (52°C) 75°F (24°C) 125°F (52°C) 75°F (24°C) 125°F (52°C) 75°F (24°C) 125°F (52°C)
032519-00
057967-00 29.8 27.4 32.6 31.0 32.8 30.6 26.2 23.6 19.8 17.4
057980-02
* 20 Drops = 1 Gram = 1 cc
Molecular UL Maximum Rated Pressure Tube Diameter Overall Length Inlet Outlet
Part No. Description
Sieve (wt.) Model PSIG* bar Inches mm Inches mm (Inches) (Inches)
.093-.098
032083-00 12 g 1" directional 1025 700 48.3 4.00 102 1/4
cap tube
1" two inlets, 1.00 2.5 1/4
058066-00 15 g 1035 750 51.7 4.19 106 3/16
directional 3/8
057404-00 16 g 1" directional 1025 700 48.3 3.81 97 5/16 5/16
Recommended Tonnages (Part Numbers 032083-00 and 058066-00): 1/4 to 1/2 tons (.9 to 1.8 kW) depending on application and system. Consult Parker.
(Part Number 057404-00): R-22 = 2 tons (7.0 kW), R-134a = 2 tons (7.0 kW), R-404A = 1.3 tons (4.6 kW), R-410A = 2 tons (7.0 kW), R-507 = 1.3 tons (4.6 kW)
1" O.D. Shell Diameter – Water Capacity In Drops (Grams*) at AHRI-710 Conditions
Water Capacity in Drops
Part No. R-22 (60 ppm) R-134a (50 ppm) R-404A, R-507 (50 ppm) R-407C (50 ppm) R-410A (50 ppm)
75°F (24°C) 125°F (52°C) 75°F (24°C) 125°F (52°C) 75°F (24°C) 125°F (52°C) 75°F (24°C) 125°F (52°C) 75°F (24°C) 125°F (52°C)
032083-00 N/R N/R 40.3 37.7 N/R N/R N/R N/R N/R N/R
058066-00 44.7 41.1 48.9 46.5 49.2 45.9 39.3 35.4 29.7 26.1
057404-00 54.7 50.6 59.8 57.0 59.5 56.0 41.9 37.8 32.3 28.8
N/R = not rated. Consult Parker for more information.
* 20 Drops = 1 Gram = 1 cc
Catalog A-1, Filter-Driers / Page 23
Application
■■ Air conditioning and heat pump systems ■■ Filter-driers also available with stan-
between 1/4 and 5 tons (.9 and 17.6 kW) dard charging tubes, SAE flare fittings,
stepped-tubes on the inlet/outlet, and
Features and Benefits coiled capillary or bent tubing to match
the unique requirements of a unit
■■ Made in the USA
■■ Filter-driers are available with a fiber-
■■ One-piece copper shells in 1" to 1-5/8"
glass pad for improved filtration – re-
O.D. (25.4 to 41.3 mm), along with spun
moves down to 20 micron sized particles
ODF solder fittings in a variety of sizes,
provide easy installation, simplified braz- ■■ UL Recognized under SMGT2/SMGT8-
ing and corrosion resistance SA1756
■■ Up to 90 grams of 100% molecular sieve
provide maximum water adsorption Inlet Outlet
One and two inlets are available as well as cap tube sizes on outlet from .125 to .50.
1" O.D. Shell Diameter – Water Capacity In Drops (Grams*) at AHRI-710 Conditions
Water Capacity in Drops
Part No. R-22 (60 ppm) R-134a (50 ppm) R-404A, R-507 (50 ppm) R-407C (50 ppm) R-410A (50 ppm)
75°F (24°C) 125°F (52°C) 75°F (24°C) 125°F (52°C) 75°F (24°C) 125°F (52°C) 75°F (24°C) 125°F (52°C) 75°F (24°C) 125°F (52°C)
032231-00 29.8 27.4 32.6 31.0 32.8 30.6 26.2 23.6 19.8 17.4
054625-01 46.2 42.7 50.5 48.1 50.2 47.3 49.4 44.8 27.3 24.3
056242-03 46.2 42.7 50.5 48.1 50.2 47.3 49.4 44.8 27.3 24.3
053817-01 85.5 79.0 93.5 89.0 93.0 87.5 91.5 83.0 50.5 45.0
* 20 Drops = 1 Gram = 1 cc
Page 24 / Catalog A-1, Filter-Driers
Inlet Outlet
1-3/16" O.D. Shell Diameter – Specifications
Molecular UL Maximum Rated Pressure Tube Diameter Overall Length Inlet Outlet
Part No. Description
Sieve (wt.) Model PSIG* bar Inches mm Inches mm (Inches) (Inches)
056243-03 1-3/16 OD 3/8" x 3/8" 3/8 3/8
25 g 319F 750 51.7 1.19 30 5.13 130
056243-04 1-3/16 OD 1/2" x 1/2" 1/2 1/2
One and two inlets are available as well as cap tube sizes on outlet from .125 to .50.
1-3/16" O.D. Shell Diameter – Water Capacity In Drops (Grams*) at AHRI-710 Conditions
Water Capacity in Drops
Part No. R-22 (60 ppm) R-134a (50 ppm) R-404A, R-507 (50 ppm) R-407C (50 ppm) R-410A (50 ppm)
75°F (24°C) 125°F (52°C) 75°F (24°C) 125°F (52°C) 75°F (24°C) 125°F (52°C) 75°F (24°C) 125°F (52°C) 75°F (24°C) 125°F (52°C)
056243-04 85.5 79.0 93.5 89.0 93.0 87.5 65.5 59.0 50.5 45.0
056243-03 85.5 79.0 93.5 89.0 93.0 87.5 65.5 59.0 50.5 45.0
* 20 Drops = 1 Gram = 1 cc
Inlet Outlet
1-5/8" O.D. Shell Diameter – Specifications
Maximum Rated Overall Length
Molecular UL Tube Diameter Inlet Outlet
Part No. Description Pressure
Sieve (wt.) Model (Inches) (Inches)
PSIG* bar Inches mm Inches mm
032040-01 45 g 1-5/8 OD 3/8"x3/8" 45g 6.00 152 3/8 3/8
032145-00 28 g 1-5/8 OD 3/8"x3/8" 28g 4.38 111 3/8 3/8
031805-03 35 g 1-5/8 OD 3/8"x3/8" 35g 5.50 140 3/8 3/8
1638F 850 58.6 1.63 41
1-5/8 OD 3/8”x3/8” 45g
056244-01 45 g 5.38 137 3/8 3/8
(w/ 2x the filter area of 031805-03)
1-5/8 OD 3/8”x3/8” 90g
056156-01 90 g 7.00 178 1/4 1/4
(w/ 2x the filter area of 031805-03
One and two inlets are available as well as cap tube sizes on outlet from .125 to .50.
These models are ideal for application in vending machine and beverage dispensing
equipment. Combining ideal capability in a compact size, the CO Series enables sys-
tem optimization while maximizing protection and cost effectiveness
OFFER OF SALE
The items described in this document and other documents and descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorized distributors (“Seller”)
are hereby offered for sale at prices to be established by Seller. This offer and its acceptance by any customer (“Buyer”) shall be governed by all of the following Terms and Con-
ditions. Buyer’s order for any item described in its document, when communicated to Seller verbally, or in writing, shall constitute acceptance of this offer. All goods, services
or work described will be referred to as “Products”.
1. Terms and Conditions. Seller’s willingness to offer The user must analyze all aspects of the application days written notice of termination. Seller may immedi-
Products, or accept an order for Products, to or from and follow applicable industry standards and Prod- ately terminate this agreement, in writing, if Buyer: (a)
Buyer is subject to these Terms and Conditions or uct information. If Seller provides Product or system commits a breach of any provision of this agreement
any newer version of the terms and conditions found options, the user is responsible for determining that (b) appointments a trustee, receiver or custodian for all
on-line at www.parker.com/saleterms/. Seller objects such data and specifications are suitable and sufficient or any part of Buyer’s property (c) files a petition for
to any contrary or additional terms or conditions of for all applications and reasonably foreseeable uses of relief in bankruptcy on its own behalf, or by a third party
Buyer’s order or any other document issued by Buyer. the Products or systems. (d) makes an assignment for the benefit of creditors, or
2. Price Adjustments; Payments. Prices stated on 8. Loss to Buyer’s Property. Any designs, tools, pat- (e) dissolves or liquidates all or a majority of its assets.
Seller’s quote or other documentation offered by Seller terns, materials, drawings, confidential information or 17. Governing Law. This agreement and the sale and
are valid for 30 days, and do not include any sales, use, equipment furnished by Buyer or any other items which delivery of all Products hereunder shall be deemed to
or other taxes unless specifically stated. Unless oth- become Buyer’s property, will be considered obsolete have taken place in and shall be governed and con-
erwise specified by Seller, all prices are F.C.A. Seller’s and may be destroyed by Seller after two consecutive strued in accordance with the laws of the State of
facility (INCOTERMS 2010). Payment is subject to years have elapsed without Buyer ordering the items Ohio, as applicable to contracts executed and wholly
credit approval and is due 30 days from the date of manufactured using such property. Seller shall not be performed therein and without regard to conflicts of
invoice or such other term as required by Seller’s Credit responsible for any loss or damage to such property laws principles. Buyer irrevocably agrees and consents
Department, after which Buyer shall pay interest on any while it is in Seller’s possession or control. to the exclusive jurisdiction and venue of the courts of
unpaid invoices at the rate of 1.5% per month or the 9. Special Tooling. A tooling charge may be imposed Cuyahoga County, Ohio with respect to any dispute,
maximum allowable rate under applicable law. for any special tooling, including without limitation, controversy or claim arising out of or relating to this
3. Delivery Dates; Title and Risk; Shipment. All dies, fixtures, molds and patterns, acquired to manu- agreement.
delivery dates are approximate and Seller shall not be facture Products. Such special tooling shall be and 18. Indemnity for Infringement of Intellectual Prop-
responsible for any damages resulting from any delay. remain Seller’s property notwithstanding payment of erty Rights. Seller shall have no liability for infringe-
Regardless of the manner of shipment, title to any any charges by Buyer. In no event will Buyer acquire ment of any patents, trademarks, copyrights, trade
products and risk of loss or damage shall pass to Buyer any interest in apparatus belonging to Seller which is dress, trade secrets or similar rights except as provided
upon placement of the products with the shipment car- utilized in the manufacture of the Products, even if such in this Section. Seller will defend and indemnify Buyer
rier at Seller’s facility. Unless otherwise stated, Seller apparatus has been specially converted or adapted for against allegations of infringement of U.S. patents, U.S.
may exercise its judgment in choosing the carrier and such manufacture and notwithstanding any charges trademarks, copyrights, trade dress and trade secrets
means of delivery. No deferment of shipment at Buy- paid by Buyer. Unless otherwise agreed, Seller shall (“Intellectual Property Rights”). Seller will defend at
ers’ request beyond the respective dates indicated will have the right to alter, discard or otherwise dispose of its expense and will pay the cost of any settlement or
be made except on terms that will indemnify, defend any special tooling or other property in its sole discre- damages awarded in an action brought against Buyer
and hold Seller harmless against all loss and additional tion at any time. based on an allegation that a Product sold pursuant
expense. Buyer shall be responsible for any additional 10. Buyer’s Obligation; Rights of Seller. To secure to this Agreement infringes the Intellectual Property
shipping charges incurred by Seller due to Buyer’s acts payment of all sums due or otherwise, Seller shall Rights of a third party. Seller’s obligation to defend
or omissions. retain a security interest in the goods delivered and and indemnify Buyer is contingent on Buyer notify-
4. Warranty. Seller warrants that the Products sold this agreement shall be deemed a Security Agreement ing Seller within ten (10) days after Buyer becomes
hereunder shall be free from defects in material or under the Uniform Commercial Code. Buyer authorizes aware of such allegations of infringement, and Seller
workmanship for a period of twelve months from the Seller as its attorney to execute and file on Buyer’s having sole control over the defense of any allegations
date of delivery to Buyer or 2,000 hours of normal use, behalf all documents Seller deems necessary to perfect or actions including all negotiations for settlement or
whichever occurs first. The prices charged for Seller’s its security interest. compromise. If a Product is subject to a claim that it
products are based upon the exclusive limited war- 11. Improper use and Indemnity. Buyer shall indem- infringes the Intellectual Property Rights of a third party,
ranty stated above, and upon the following disclaimer: nify, defend, and hold Seller harmless from any claim, Seller may, at its sole expense and option, procure for
DISCLAIMER OF WARRANTY: THIS WARRANTY liability, damages, lawsuits, and costs (including attor- Buyer the right to continue using the Product, replace
COMPRISES THE SOLE AND ENTIRE WARRANTY ney fees), whether for personal injury, property dam- or modify the Product so as to make it noninfringing, or
PERTAINING TO PRODUCTS PROVIDED HERE- age, patent, trademark or copyright infringement or any offer to accept return of the Product and return the pur-
UNDER. SELLER DISCLAIMS ALL OTHER WAR- other claim, brought by or incurred by Buyer, Buyer’s chase price less a reasonable allowance for deprecia-
RANTIES, EXPRESS AND IMPLIED, INCLUDING employees, or any other person, arising out of: (a) tion. Notwithstanding the foregoing, Seller shall have
DESIGN, MERCHANTABILITY AND FITNESS FOR A improper selection, improper application or other mis- no liability for claims of infringement based on informa-
PARTICULAR PURPOSE. use of Products purchased by Buyer from Seller; (b) tion provided by Buyer, or directed to Products deliv-
5. Claims; Commencement of Actions. Buyer any act or omission, negligent or otherwise, of Buyer; ered hereunder for which the designs are specified in
shall promptly inspect all Products upon delivery. No (c) Seller’s use of patterns, plans, drawings, or speci- whole or part by Buyer, or infringements resulting from
claims for shortages will be allowed unless reported to fications furnished by Buyer to manufacture Product; the modification, combination or use in a system of
the Seller within 10 days of delivery. No other claims or (d) Buyer’s failure to comply with these terms and any Product sold hereunder. The foregoing provisions
against Seller will be allowed unless asserted in writing conditions. Seller shall not indemnify Buyer under any of this Section shall constitute Seller’s sole and exclu-
within 30 days after delivery. Buyer shall notify Seller circumstance except as otherwise provided. sive liability and Buyer’s sole and exclusive remedy for
of any alleged breach of warranty within 30 days after 12. Cancellations and Changes. Orders shall not be infringement of Intellectual Property Rights.
the date the defect is or should have been discovered subject to cancellation or change by Buyer for any 19. Entire Agreement. This agreement contains the
by Buyer. Any action based upon breach of this agree- reason, except with Seller’s written consent and upon entire agreement between the Buyer and Seller and
ment or upon any other claim arising out of this sale terms that will indemnify, defend and hold Seller harm- constitutes the final, complete and exclusive expres-
(other than an action by Seller for an amount due on less against all direct, incidental and consequential loss sion of the terms of sale. All prior or contemporaneous
any invoice) must be commenced within 12 months or damage. Seller may change product features, speci- written or oral agreements or negotiations with respect
from the date of the breach without regard to the date fications, designs and availability with notice to Buyer. to the subject matter are herein merged.
breach is discovered. 13. Limitation on Assignment. Buyer may not assign 20. Compliance with Law, U. K. Bribery Act and
6. LIMITATION OF LIABILITY. UPON NOTIFICATION, its rights or obligations under this agreement without U.S. Foreign Corrupt Practices Act. Buyer agrees to
SELLER WILL, AT ITS OPTION, REPAIR OR REPLACE the prior written consent of Seller. comply with all applicable laws and regulations, includ-
A DEFECTIVE PRODUCT, OR REFUND THE PUR- 14. Force Majeure. Seller does not assume the risk and ing both those of the United Kingdom and the United
CHASE PRICE. IN NO EVENT SHALL SELLER BE shall not be liable for delay or failure to perform any of States of America, and of the country or countries of the
LIABLE TO BUYER FOR ANY SPECIAL, INDIRECT, Seller’s obligations by reason of circumstances beyond Territory in which Buyer may operate, including without
INCIDENTAL OR CONSEQUENTIAL DAMAGES the reasonable control of Seller (hereinafter “Events of limitation the U. K. Bribery Act, the U.S. Foreign Cor-
ARISING OUT OF, OR AS THE RESULT OF, THE Force Majeure”). Events of Force Majeure shall include rupt Practices Act (“FCPA”) and the U.S. Anti-Kickback
SALE, DELIVERY, NON-DELIVERY, SERVICING, without limitation: accidents, strikes or labor disputes, Act (the “Anti-Kickback Act”), and agrees to indemnify
USE OR LOSS OF USE OF THE PRODUCTS OR acts of any government or government agency, acts and hold harmless Seller from the consequences of any
ANY PART THEREOF, OR FOR ANY CHARGES OR of nature, delays or failures in delivery from carriers or violation of such provisions by Buyer, its employees
EXPENSES OF ANY NATURE INCURRED WITHOUT suppliers, shortages of materials, or any other cause or agents. Buyer acknowledges that they are familiar
SELLER’S WRITTEN CONSENT, EVEN IF SELLER beyond Seller’s reasonable control. with the provisions of the U. K. Bribery Act, the FCPA
HAS BEEN NEGLIGENT, WHETHER IN CONTRACT, 15. Waiver and Severability. Failure to enforce any and the Anti-Kickback Act, and certifies that Buyer will
TORT OR OTHER LEGAL THEORY. IN NO EVENT provision of this agreement will not waive that provi- adhere to the requirements thereof. In particular, Buyer
SHALL SELLER’S LIABILITY UNDER ANY CLAIM sion nor will any such failure prejudice Seller’s right to represents and agrees that Buyer shall not make any
MADE BY BUYER EXCEED THE PURCHASE PRICE enforce that provision in the future. Invalidation of any payment or give anything of value, directly or indirectly
OF THE PRODUCTS. provision of this agreement by legislation or other rule to any governmental official, any foreign political party
7. User Responsibility. The user, through its own anal- of law shall not invalidate any other provision herein. or official thereof, any candidate for foreign political
ysis and testing, is solely responsible for making the The remaining provisions of this agreement will remain office, or any commercial entity or person, for the pur-
final selection of the system and Product and assuring in full force and effect. pose of influencing such person to purchase products
that all performance, endurance, maintenance, safety 16. Termination. Seller may terminate this agreement or otherwise benefit the business of Seller.
and warning requirements of the application are met. for any reason and at any time by giving Buyer thirty (30)
© 2015 Parker Hannifin Corporation. Catalog A-1 / 42015