Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

ReoShore 45

MANUFACTURER
VLP Products DOSAGE
DESCRIPTION The recommended dose rate for ReoShore 45 is
2kg/m3 to 5kg/m3. Re3% value – 20% to 40%.
ReoShore 45 is a high performance structural
polypropylene fibre. The unique surface design APPLICATION
provides anchorage to maximize energy For best results ReoShore 45 be added to the
absorption. concrete mix during the batching process.
ReoShore 45 is a high aspect ratio fibre of 82. Its Alternatively, they can be added after batching and
design provides excellent resistance to rupture mixed in the agitator for a minimum of 3 minutes.
forces thereby enhancing concrete toughness and To ensure optimal performance, fibres must be
crack control. kept dry.
ReoShore 45 conforms to the ASTM C 1116-10. PACKAGING
PROPERTIES ReoShore 45 is available in 1kg bags.
Material 100% virgin polypropylene STORAGE / SHELF LIFE
Fibre Count 31,000/kg Reoshore 45 should be stored undercover and
Form Monofilament fibre system protected from the weather.
Length 45mm
Specific Gravity 0.91
Acid/Alkali Reisistance Excellent
Tensile Strength 750 mPA to 850 mPA
Absorption Nil
ReoShore 45

ARShore45/4/0513
The technical information and application advice given in this BASF publication are based on the present state of
STATEMENT OF our best scientific and practical knowledge. As the information herein is of a general nature, no assumption can be
RESPONSIBILITY made as to a product's suitability for a particular use or application and no warranty as to its accuracy, reliability or
completeness either expressed or implied is given other than those required by law. The user is responsible for
checking the suitability of products for their intended use.

Field service where provided does not constitute supervisory responsibility. Suggestions made by BASF either
NOTE orally or in writing may be followed, modified or rejected by the owner, engineer or contractor since they, and not
BASF, are responsible for carrying out procedures appropriate to a specific application.
BASF Australia Ltd Sales Offices: BASF Emergency Advice:
ABN 62008437867 Sydney, Brisbane, Melbourne, 1800 803 440 within Australia (24hr)
Construction Chemicals Division Adelaide, Perth 0800 944 955 within New Zealand
11 Stanton Road Seven Hills, NSW 2147 Freecall: 1300 227 300
BASF New Zealand Ltd 45 William Pickering Drive, Albany, Auckland, Phone: 0800 334 877
BASF WEB SITES www.basf-cc.com.au www.basf-cc.co.nz

You might also like