Professional Documents
Culture Documents
Catridges Valves
Catridges Valves
HYDAC Products
Our product range extends from cartridge valves to multi-function manifolds.
HYDAC is capable of integrating products into manifold solutions for every
application.
HYDAC Quality
HYDAC stands for quality and customer satisfaction. We are certified to
ISO 9001:2000 and can supply our products with certification if required.
To ensure that our products are as innovative as possible, they are developed,
manufactured, and tested by qualified personnel using advanced technology.
Pressure Controls
• Pressure Relief with up to 6000 psi pressure rating
• Pressure Reducing valves with consistent pressure control stability and precision
Flow Controls
• High accuracy Pressure Compensated flow regulators
Integrated Manifolds
Used in applications where high performance and reliability are important.
HYDAC can satisfy customers’ needs for Complete Cost-Effective System Solutions by incorporating cartridge valves and other
Hydac hydraulic components, such as Filters, Accumulators, and Accessories into Integrated Manifolds.
Common applications include:
• Construction Equipment
• Farm Machinery
• Utility Service Equipment
• Aerial Work Platforms
• Lift Trucks
• Refuse Management Equipment
• Road Maintenance Equipment
HYDAC’s 50+ years of Cartridge Valves design and manufacturing experience and Global operations in more than 40+ countries provide
excellent support for all your control systems and applications needs.
Approvals
1
Direct Acting, Ball Type DB06A-01 4 15 5000 350 FC06-2 16
Needle Valve,
2 1 SDR10A-01 42 160 5000 350 FC10-2 44
Free Reverse Flow
2 4
ST10-01 12 45 5000 350 FC10-4 54
Flow Divider/Combiner,
Re-synchronizing
3
ST16-01 39 150 5000 350 FC16-4 56
2 1
Integral Relief, Ball Type RV06B-01 4 15 5000 350 FC06-3 76
3
Integral Relief, Poppet Type RV06C-01 5 19 5000 350 FC06-3 78
C1 C2
Counterbalance Valves
Flow Rate Pressure
Symbol Description Model gpm l/min psi bar Cavity Page #
1
3
Counterbalance Valve RS08-01 10 38 5000 350 FC08-3 88
2
3 Normally Closed,
Vent to Open
2
DW16SA-01 75 284 5000 350 FC16-S3 94
2
3
DW10Z-01 40 151 5000 350 FC10-S3 104
Normally Closed
2
DW16Z-01 80 304 5000 350 FC16-S3 106
2
Normally Closed, Pilot Operated with Screen WS08Z-30
8 30 5000 350 FC08-2 144
Normally Closed, Pilot Operated with Screen,
WS08Z-30M
1 Manual Override, Screw Type
Normally Closed, Pilot Operated,
WS08ZR-01
Free Reverse Flow
10 38 5000 350 FC08-2 146
Normally Closed, Pilot Operated, Free Reverse
WS08ZR-01M
Flow, Manual Override, Screw Type
Normally Closed, Pilot Operated,
WS10ZR-01
Free Reverse Flow
2 20 75 5000 350 FC10-2 148
Normally Closed, Pilot Operated, Free Reverse
WS10ZR-01M
Flow, Manual Override, Screw Type
Normally Closed, Pilot Operated,
WS12ZR-01
1 Free Reverse Flow
29 110 5000 350 FC12-2 150
Normally Closed, Pilot Operated, Free Reverse
WS12ZR-01M
Flow, Manual Override, Screw Type
Normally Closed, Pilot Operated,
WS16ZR-01
Free Reverse Flow
40 150 5000 350 FC16-2 152
Normally Closed, Pilot Operated, Free Reverse
WS16ZR-01M
Flow, Manual Override, Screw Type
2
2
Normally Closed, Pilot Operated with Screen,
WS08ZR-30
Free Reverse Flow
8 30 5000 350 FC08-2 156
Normally Closed, Pilot Operated with Screen,
WS08ZR-30M
1
Free Reverse Flow, Manual Override, Screw Type
1
Normally Closed, Direct Acting WS10W-01
10.5 40 5000 350 FC10-2 162
Normally Closed, Direct Acting,
WS10W-01M
Manual Override, Push Type
2
Normally Closed, Direct Acting with Screen WS08W-30
5 19 3600 250 FC08-2 164
Normally Closed, Direct Acting with Screen,
WS08W-30M
1 Manual Override, Push Type
3 1
Direct Acting WK10Z-01
8.4 32 5000 350 FC10-4 228
Direct Acting, Manual Override, Screw Type WK10Z-01M
5 4 2
1
Piloted 3-Way Spool, Hydraulically Operated HPM45SE-01 70 265 5000 350 FCM45-5 256
3
Proportional Valves
Pressure Relief
Flow Rate Pressure
Symbol Description Model gpm l/min psi bar Cavity Page #
1
Pilot Operated, Spool Type PDB10P-01 31 120 5000 350 FC10-2 262
2 Pilot Operated, Spool Type PDB12P-01 53 200 5000 350 FC12-2 264
Pilot Operated, Spool Type PDB16P-01 79 300 5000 350 FC16-2 266
2 3
PDR08P-01 16 60 5000 350 FC08-3 270
Pilot Operated, Spool Type
1 PDR10P-01 21 80 5000 350 FC10-3 272
Pumps
Manually Operated
Displacement Output Max
per Stroke Pressure
Symbol Description Model in cm psi bar Cavity Page #
2
Hand Pump, Free Pivot Handle MP10-01 276
0.5 8.2 3000 207 FC10-2
1
Hand Pump, Flange Mount MP10-02 278
• C
onsolidates hydraulic control system into compact and neat assembly,
saving space and weight
• C
omplete system manifolds provide for compact and neat assembly,
saving space and weight. They are designed to meet the performance and
installation needs of the specific machine. By eliminating hoses, tubes
and fittings necessary when traditional hydraulic valves are used, manifold
systems dramatically reduce installation costs and system maintenance.
• C
omplete control system in a single manifold reduces potential for external
leakage to ensure a cleaner and safer application environment.
• A
ll aluminum manifolds are anodized for cleanliness, added surface
hardening, and corrosion resistance. Ductile iron or steel manifolds are zinc
plated on customer’s requirements.
• A
customer/product specific assembly drawing is prepared for every
manifold.
• H
YDAC will assemble customer specified fittings or other components on
request where feasible.
30 lbs
15 lbs
Size 06
Size 08
Size 10
D03
Features
• Adjustable under full pressure
• Stroke limiting device for enhanced safety
• Positive stop to prevent spring from over adjustment
• Screens to protect pilot orifice from contamination and ensure reliable operation
• Variety of adjustment mechanism options
• Fast response with excellent stability
• All external surfaces zinc-plated
• Hardened poppets or spools ensure minimal wear and extend service life
• One piece body maximizes reliability and minimizes the effects of eccentricity
• Industry common cavity-compact size
Operation
The DB06A blocks flow from 1 to 2 until the predetermined pressure setting is
reached at port 1 to lift the spring opposed ball from its seat, allowing flow from
2 port 1 to port 2. Pressure at port 2 is directly additive to valve pressure setting.
Flow from port 2 to port 1 is checked.
Features
• Spring ranges up to 5000 psi (350 bar)
• Positive stop prevents spring from over adjustment
• Adjustment screw cannot be backed out of the valve
• Adjustable under full pressure
• Fast response
• All external surfaces zinc-plated
• Hardened ball to ensure minimal wear and extend service life
Specifications
Operating Pressure 5000 psi (350 bar)
Maximum Flow Rate 4 gpm (15 l/min)
Internal Leakage 5 drops/min maximum to 75%
of nominal setting
Optional Pressure Ranges 0 to 3000 psi (0 to 207 bar)
0 to 5000 psi (0 to 350 bar)
Reseat Pressure (Nominal) 80% of crack pressure
Fluid Operating Temp Range -20° to 248°F (-29° to 120°C)
Fluid Compatibility Mineral-Based or Synthetics
with lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC06-2 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02582046
Finisher: 02582047
Cartridge Weight 0.15 lb (68 g)
Cartridge Material Steel with hardened work surfaces.
1 Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Solid Thermoplastic Polyester back-up rings.
Seal Kits Buna-N FS062-N P/N: 02610184
Viton® FS062-V P/N: 02610185
Performance
Measured at 135 SUS (28 cSt)
bar psi TOil = 100°F (38°C)
6000
400
5000
Pressure Drop
300
4000
200 3000
2000
100
1000
0 0 gpm
0 1 2 3 4
l/min
0 5 10 15
Flow
0.55
(14)
Adjustment Options
V = Allen Head (Hex 1/8”)
2 Setting
(38.1)
1.5
(50.8)
1 1.0 Thick
(25.4)
0.25 1.5
(6.4) (38.1)
2.0
(50.8)
(39.4) Max
1.55 Max
(27.7)
1.09
0.13
(3.3)
(21.3)
0.84
1
ø0.47
(ø11.9)
9/16-18 UNF-2A
Standard Line Bodies*
Pressure
Code Part No Material Weight
ø0.69 Rating
(ø17.5) Aluminum, 3500 psi 0.34 lbs
FH062-AS4 02600491
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lbs
FH062-SS4 02600490
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
The DB06C blocks flow from 1 to 2 until the predetermined pressure setting is
reached at port 1 to lift the spring opposed poppet from its seat, allowing flow
2 from port 1 to port 2. Pressure at port 2 is directly additive to valve pressure
setting. Flow from port 2 to port 1 is checked.
Features
• Spring ranges up to 5000 psi (350 bar)
• Positive stop prevents spring from over adjustment
• Adjustment screw cannot be backed out of the valve
• Adjustable under full pressure
• Fast response
• All external surfaces zinc-plated
• Hardened poppet to ensure minimal wear and extend service life
Specifications
Operating Pressure 5000 psi (350 bar)
Maximum Flow Rate 5 gpm (19 l/min)
Internal Leakage 5 drops/min maximum to
75% of nominal setting
Optional Pressure Ranges 0 to 1800 psi (0 to 124 bar)
0 to 3000 psi (0 to 207 bar)
1500 to 5000 psi (103 to 350 bar)
Reseat Pressure (Nominal) 80% of crack pressure
Fluid Operating Temp Range -20° to 248°F (-29° to 120°C)
Fluid Compatibility Mineral-Based or Synthetics
with lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
2 Installation No orientation restrictions
Cavity FC06-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02582046
Finisher: 02582047
1 Cartridge Weight 0.15 lb (68 g)
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Solid Thermoplastic Polyester back-up rings.
Seal Kits Buna-N FS062-N P/N: 02610184
Performance Viton® FS062-V P/N: 02610185
Measured at 135 SUS (28 cSt)
bar psi TOil = 100°F (38°C)
5000
300
Pressure Drop
4000
250
200 3000
150
2000
100
1000
50
0 0 gpm
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
l/min
0 2 4 6 8 10 12 14 16 18
Flow
1 1.00 Thick
(25.4)
0.25 1.50
(6.4) (38.1)
2.00
(50.8)
(39.4) Max
1.55 Max
(27.7)
1.09
0.13
(3.3)
(21.3)
0.84
1
ø0.47
(ø11.9) Standard Line Bodies*
9/16-18 UNF-2A Pressure
Code Part No Material Weight
Rating
ø0.69 Aluminum, 3500 psi 0.34 lbs
FH062-AS4 02600491
(ø17.5) anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lbs
FH062-SS4 02600490
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
The DB08A blocks flow from port 1 to port 2 until the pressure setting is reached
at port 1 to lift the spring opposed poppet from its seat, allowing flow from port
1 to port 2. Pressure at port 2 is directly additive to valve pressure setting. Flow
2 from port 2 to port 1 is checked.
Features
• Spring ranges up to 6000 psi (420 bar)
• Positive stop prevents spring from over adjustment (options V,H)
• Adjustable under full pressure
• Stroke limiting device for enhanced safety
• Fast response
• All external surfaces zinc-plated
• Hardened poppet to ensure minimal wear and extend service life
• One piece body maximizes reliability and minimizes the effects of eccentricity
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Nominal Flow 10 gpm (38 l/min)
Internal Leakage 5 drops/min. (0.25 cc/min) max.
to 80% of nominal setting
Reseat Pressure (Nominal) 80% of crack pressure
Optional Pressure Ranges 55 to 500 psi (4 to 35 bar)
95 to 900 psi (6.5 to 60 bar)
200 to 1800 psi (14 to 125 bar)
370 to 3300 psi (26 to 230 bar)
560 to 5000 psi (39 to 350 bar)
670 to 6000 psi (47 to 420 bar)
% of Spring Pressure Range 18%
2 Actuated at 1 Revolution
(Adjustment Type V, H)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
1 (Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Performance Use with filter rated ß10 ≥ 200.
Measured at 158 SUS (34 cSt) Installation No orientation restrictions
bar psi Toil = 115oF (46oC) Cavity FC08-2 (see Line Bodies & Cavities section)
8000
500 Cavity Tools Rougher: P/N: 02580090
7000
Finisher: P/N: 02580091
6000
400 Cartridge Weight 0.49 Lbs. (0.220 kg)
5000
Pressure
300
Cartridge Material Steel with hardened work surfaces.
4000 Zinc-plated exposed surfaces.
200 3000 Anodized aluminum knobs. (option H)
Buna N or Viton® o-rings, and
2000
100 PTFE back-up rings.
1000
Seal Kits Buna-N FS082-N P/N: 03033920
gpm
0 0
0 2 4 6 8 10 12 Viton® FS082-V P/N: 03051756
l/min
0 10 20 30 40 45
Flow
N = Buna-N
Max.)
Max.
Max.)
(76.6Max.)
3.02Max.
V = Viton®
(76.6(76.6
3.023.02
Adjustment Range
(76.6
3.02
(15.5)
0.61
050 = 55 to 500 psi (4 to 35 bar)
0.61 0.61
(15.5)(15.5)
0.61 090 = 95 to 900 psi (6.5 to 60 bar)
(15.5)
0.61
(15.5) 180 = 200 to 1800 psi (14 to 125 bar)
330 = 370 to 3300 psi (26 to 230 bar)
2 2
0.28 1.496
2
2 2 600 = 670 to 6000 psi (47 to 420 bar)
21.50
(38)
(7.1)
0.28
0.28 0.28
(7.1) (7.1)
1.50
(38)
(50)
(50) (50)
2 2
Adjustment Options
(50)
0.28
(7.1)
22
(50)
(79.10)
(77.5)
Max. 3.11
3.1
Max.Max.
Max.Max.
2.24
(57)
Max.)Max.)
Max.Max.
Max.
(77.6)Max.
Max.)
Max.
3.06Max.
(77.6)
(77.6Max.)
3.063.06
3.06Max.
3.06 3.06
(77.6(77.6
(77.6)
(77.6)
3.06
3.06
(77.6
(28)
1.1
2
INCH (MILLIMETER)
1.1
(28)
2 0.5
1.1
(28)
* Dimensions determined by 2 2
(12.7)
manufacturing origin. 1
ø0.5 3/4 -16 UNF -2A
1
ø0.5 ø12.7)
(1 1
ø0.5 ø0.5
(ø12.7)
(ø12.7) (ø12.7) 3/4-16 UNF-2A
3/4-16 UNF-2A
3/4-16 UNF-2A
3/4-16 UNF-2A
9/ 16" HEX
9/ 16" HEX
9/ 16" HEX 9/ 16" HEX
(85.6)(85.6)
3.37 3.37
3.11 3.11
(79) (79)
(85.6)
3.11
3.37
(79)
3.11
(79)
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.34 lb
FH082-AS6 03011409
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.00 lb
FH082-SS6 00560917
All measurements in inches (mm). Zinc plated (420 bar) (0.45 kg)
Subject to technical modifications
*Please refer to Line Bodies & Cavities section for details
Operation
The DB08P blocks flow from port 1 to port 2 until the predetermined pressure
setting is reached at port 1 to lift the spring opposed pilot poppet off its seat,
creating a low flow and a pressure drop across the orifice in the main spool.
2 This allows the main spool to shift, opening port 1 to port 2. Pressure at port 2
is directly additive to valve pressure setting.
Features
• Spring ranges up to 5000 psi (350 bar)
• Positive stop prevents spring from over adjustment (options V,H)
• Adjustable under full pressure
• One-piece body maximizes reliability & minimizes the effects of eccentricity
• Low pressure rise over flow range
• Screen protected pilot orifice to enhance safety
• Fast response with excellent stability
• All external surfaces zinc-plated
• Hardened spool & pilot poppet to ensure minimal wear & extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 16 gpm (60 l/min)
Internal Leakage less than 30.5 cu in/min at 5000 psi
(0.5 l/min at 350 bar)
Reseat Pressure (Nominal) 90% of crack pressure
Optional Pressure Ranges 60 to 500 psi (4 to 35 bar)
60 to 900 psi (4 to 60 bar)
60 to 1800 psi (4 to 125 bar)
60 to 3300 psi (4 to 230 bar)
60 to 5000 psi (4 to 350 bar)
2 % of Spring Pressure Range 24%
Actuated at 1 Revolution
(Adjustment Type V, H)
300
4000 Cartridge Material Steel with hardened work surfaces.
200 3000 Zinc-plated exposed surfaces.
Anodized aluminum knobs. (option H)
2000
100
Buna N or Viton® o-rings and
1000 PTFE back-up rings.
0 0
0 2 4 6 8 10 12 14 16
gpm Seal Kits Buna-N FS082-N P/N: 03033920
l/min
Viton® FS082-V P/N: 03051756
0 10 20 30 40 50 60
Flow
(63 Max.)
(63 Max.)
25-30 Nm)
7/8”Torque
7/8” HEX HEX Torque 18.5-22
18.5-22 ft-lbs ft-lbs
V = Viton®
(Torque
(Torque 25-3025-30
Nm) Nm) Adjustment Range
7/8” HEX Torque 18.5-22 ft-lbs
(Torque 25-30 Nm) 050 = 60 to 500 psi (4 to 35 bar)
(15.5) (15.5)
0.61 (15.5)
0.61 0.61
090 = 60 to 900 psi (4 to 60 bar)
0.61
1.50
(15.5)
330 = 60 to 3300 psi (4 to 230 bar)
2 2
0.28 0.28
(7.1) (7.1)
(15.5)
(38)1.50
(50)2.0 1.50
0.28
(7.1) (38)
0.61
(38)
(50) (50)
2.0
2.0 (50)
2.0
1.50
2 2 Adjustment Options
0.28
(50)
Adjustment Options
‘V’ - Allen Head (std) ‘H’ ø-1.5
Handø1.5
Knob
(ø38) (ø38)
ø1.5 ø1.5
2.52 Max.
(64 Max.)
2.52 Max.
(64 Max.)
ø1.5
(ø38) (ø38)
(ø38)
Max.
2.52 Max.
(64 Max.)
(64 Max.)
2.52 Max.
Max.)
2.52
2.52 Max.
(64 Max.)
2.52 Max.
(64 Max.)
0.08 (2)(64
0.08
0.08
(2) (2)
Max.
2.52 Max.
(64 Max.)
(64 Max.)
Max.
Max.)
0.08
(2)
0.08
(2)
2.52
2.52
(64
1.10 1.10
(28) (28)
1.10
1.10 (28)
2 2
(28)
1.10
(28)
1 1 2 22
1 11 ø 0.5 ø 0.5
(12.7) (12.7)
3 /4 " - 31/64UNF
" - 16
- UNF
2A - 2A ø 0.5
ø 0.5
ø 0.5
(12.7)
(12.7)
(12.7)
3/4 "3/4 " 6"-UNF
3- /14 -1 6
1 UNF
6U 2 A- -2A2 A
- NF
1/ 2"1H
/ 2E
1"X
/H
2"EX
HEX
(70.6) (70.6)
2.78 (70.6)
(70.6)2.78
(70.2) (70.2)
(70.2) 2.67
2.78
(70.2)
2.67
2.67
(70.6)
2.78
2.67
(70.2)
2.67
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.34 lb
FH082-AS6 03011409
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.00 lb
FH082-SS6 00560917
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
The DB10P blocks flow from port 1 to port 2 until the pressure setting is reached
at port 1 to lift the pilot poppet creating a pressure drop across the main spool.
This allows the main spool to shift, opening port 1 to port 2. Pressure at port 2 is
2 directly additive to valve pressure setting.
Features
• Spring ranges up to 6000 psi (420 bar)
• Positive stop prevents spring from over adjustment (options V,H)
• Adjustable under full pressure
• One-piece body maximizes reliability and minimizes the effect of eccentricity
• Screen protected control orifice to enhance safety
• Fast response with excellent stability
• All external surfaces zinc-plated
• Hardened spool & pilot poppet to ensure minimal wear & extend service life
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Nominal Flow 32 gpm (120 l/min)
Internal Leakage less than 30.5 cu in/min at 5000 psi
(0.5 l/min at 350 bar)
Reseat Pressure (Nominal) 90% of crack pressure
Optional Pressure Ranges 60 to 500 psi (4 to 35 bar)
60 to 900 psi (4 to 60 bar)
60 to 1800 psi (4 to 125 bar)
60 to 3300 psi (4 to 230 bar)
60 to 5000 psi (4 to 350 bar)
60 to 6000 psi (4 to 420 bar)
2 % of Spring Pressure Range 24%
Actuated at 1 Revolution
(Adjustment Type V, H)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
1 (Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Performance Use with filter rated ß10 ≥ 200.
Measured at 158 SUS (34 cSt) Installation No orientation restrictions
psi bar o o
Toil = 115 F (46 C) Cavity FC10-2 (see Line Bodies & Cavities section)
600
8000 Cavity Tools Rougher: 02580274
7000 500 Finisher: 02580247
6000 Cartridge Weight 0.44 Lbs. (0.200 kg)
400
Pressure
9/16” HEX
2.522.52
2.52
Max)
(64.1
(64.1
1” HEX29.5-37
Torque Torque
29.5-37 HEX ft-lbs
1” ft-lbs
2.52 (64.1
(Torque 40-50
1” HEX V = Viton®
Torque 29.5-37 ft-lbs
(Torque 40-50 Nm) Adjustment Range
050 = 60 to 500 psi (4 to 35 bar)
090 = 60 to 900 psi (4 to 60 bar)
(18.8)
(18.8)
0.740.74
0.74
180 = 60 to 1800 psi (4 to 125 bar
(18.8)
0.74
(18.8)
330 = 60 to 3300 psi (4 to 230 bar)
(38.1)
(38.1)
1.5
2.132.131.51.5
(38.1)
2 2
0.280.28
(7.1)(7.1)
0.28
(7.1)
1.5
2 2
(55)(55)
0.28
0.28 (7.1)
(55)(55)
2.13
(38.1)
Adjustment Options
2
(7.1)
Adjustment Options
ø 0.94 ø 0.94
‘V’ - Allen
ø 0.94 øø0.94
ø (24)Head(24)(std) ‘H’ - Hand Knob
ø1.5 ø1.5
ø 0.800.94øø (24)
ø ø(24)
0.80
(ø38)
(ø38) ø1.5
ø (24)(ø
(ø 20.4) 20.4)
ø 0.80 ø1.5
ø 0.80 ø1.5 (ø38)
ø 0.80(ø 20.4) (ø38)
(ø 20.4) (ø38)
(ø 20.4)
max.
2.56 max.
max.)
max.max.)
Max.
Max.Max.
Max.)
(65 Max.)
max.
max.)
Max.
Max.)
2.56 max.
max.)
2.562.56
2.56max.)
2.56Max.
(65 Max.)
2.562.56
(65 Max.)
2.56
(65 (65
(65
(65 (65
(44.5)
1.75(44.5)
1.751.75
1.75 1.75
(65
2.56
(44.5)
(65
(44.5)
(44.5)
(33)(33)
(33)1.3(33)
1.3 1.3
1.3 1.3
2 2
(33)
2 2
2 ø 0.63 ø 0.63
1 1 (ø(øø15.88)
0.63(ø 15.88)
ø 0.63
1 1 7/8-1415.88)
ø 0.63(øUNF-2A
15.88)UNF-2A
7/8-14
7/8-14 UNF-2A
1 (ø 15.88)
‘K’ - Protective Cap
7/8-14 UNF-2A
‘F’ - Tamper Proof Cap
7/8-14 UNF-2A
11//22""H
HE
1
EX
X
/ 2" HEX
1/ 2" HEX
1/ 2" HEX
(66.7)
(66.7) (66.7)
(66.7)
2.632.63
2.63 2.63
2.732.73
69.469.4
2.63
2.73
69.4
(66.7)
Pressure
2.73
69.4
Operation
The DB12P blocks flow from port 1 to port 2 until the pressure setting is reached
at port 1 to lift the pilot poppet, creating a pressure drop across the main spool.
This allows the main spool to shift, opening port 1 to port 2. Pressure at port 2 is
2 directly additive to valve pressure setting.
Features
• Spring ranges up to 5000 psi (350 bar)
• Positive stop prevents spring from over adjustment (options V,H)
• Adjustable under full pressure
• One-piece body maximizes reliability and minimizes the effect of eccentricity
• Low pressure drop due to an optimized flow-path
• Screen protected pilot control orifice to enhance safety
• Fast response with excellent stability
• All external surfaces zinc-plated
• Hardened spool & pilot poppet to ensure minimal wear & extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 53 gpm (200 l/min)
Internal Leakage less than 30.5 cu in/min at 5000 psi
(0.5 l/min at 350 bar)
Reseat Pressure (Nominal) 90% of crack pressure
Optional Pressure Ranges 45 to 500 psi (3 to 35 bar)
45 to 900 psi (3 to 60 bar)
45 to 1800 psi (3 to 125 bar)
60 to 3300 psi (4 to 230 bar)
2 60 to 5000 psi (4 to 350 bar)
% of Spring Pressure Range 24%
Actuated at 1 Revolution
(Adjustment Type V, H)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
1 (Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Performance Installation No orientation restrictions
Measured at 158 SUS (34 cSt)
bar psi
Cavity FC12-2 (see Line Bodies & Cavities section)
TOil = 115°F (46°C)
500
7000 Cavity Tools Rougher: 02580667
450 Finisher: 02580668
400 6000
350
Cartridge Weight 0.59 Lbs. (0.270 kg)
5000
Cartridge Material Steel with hardened work surfaces.
Pressure
300
4000
250 Zinc-plated exposed surfaces.
200 3000 Anodized aluminum knobs. (option H)
150
2000
Buna N or Viton® o-rings, and
100 PTFE back-up rings.
1000
50 Seal Kits Buna-N FS122-N P/N: 03071298
0 0
0 10 20 30 40 50
gpm Viton® FS122-V P/N: 03071299
l/min
0 20 40 60 80 100 120 140 160 180 200
Flow
(31.5) SW1/4”
4 Valve Model
Max.)
SWHEX13
(Torque
(Torque 50-60
1/2”50-60 Nm)
HEX Nm)
1/2”SWHEX Body & Ports
2.09
13
(53
1 1/4” HEX Torque 37-44 ft-lbs SS12 = SAE-12 ports, steel body
2.09 Max.
(57.2) 2.09(53
(53 Max.)
(Torque
1 1/4” HEX50-60 Nm)
Torque 37-44 ft-lbs
(Torque 50-60 Nm) Seals
(26.55)
(26.55)
1.05
N = Buna-N
1.05
V = Viton®
2.25
(57.2)
2.25
(26.55)
Adjustment Range
1.05
(26.55)
22 050 = 45 to 500 psi (3 to 35 bar)
1.05
(57.2)
2.25
(26.55)
090 = 45 to 900 psi (3 to 60 bar)
(57.2)
2.25
1.05
0.34
(8.6)
(76.5)
0.34
(8.6)
(76.5)
3.0
2.0
(57.2)
2.0
(76.5) 2.25
T hi ck
22(50.8)
(50.8)
T hi ck 330 = 60 to 3300 psi (4 to 230 bar)
500 = 60 to 5000 psi (4 to 350 bar)
(8.6) 0.34
(8.6)
0.34
(8.6)
(76.5)
2
(76.5) 3.0
3.0
2.02.0Thick
T hi ck Adjustment Options
0.34
(50.8)
(50.8)
F = Factory pre-set, non-adjustable
3.0
2.0 T hick
11 (50.8)
(must specify setting below)
0.20
0.20 2.56
2.56 H = Knurled Hand Knob
(5)
(5) (65)
(65) K = Allen Head (HEX 5/32”) w/ cover cap
0.20 3.0
3.0
11 2.56 V = Allen Head (HEX 5/32”)
0.20(5) (76.5) 2.56
(65)
(5)
(76.5) 1 Setting (optional)
(65)
0.20
3.0
2.56 (omit) = Set at min. pressure for the range
3.0
(76.5) XXX = Desired psi ÷ 10
(5)
(76.5) (65)
3.0 Example: 300 = 3000 psi
(76.5)
Adjustment Options
‘V’ - Allen Head (std) ‘H’ - Hand
1.5Knob
1.5
(( 38)
38)1.5
Max.
Max.)
2.13Max.
(54Max.)
( 38)
(2) 2.13 Max.
(54 Max.)
1.5
2.13
( 38)
2.13 Max. (54
2.13 Max.
Max.)
1.5
( 38)
0.08
0.08
(54 Max.)
(2)
0.08
(2)
Max.)
2.13 Max.
(54Max.)
2.13 Max. Max.
Max.)
(46) (2) 0.08
(54
(54
(54 Max.)
1.810.08
1.81
(46)
1.81
(46)
22 2
(46)1.81
(46)
1
11 ø 0.882 2
1.81
øø0.88
0.88(ø22.23)
(ø22.23)
(ø22.23)
1 1/16"-12UN-2A
111/16"-12UN-2A
1/16"-12UN-2A 1
ø 0.88 1
(ø22.23)
ø 0.88
1 1/16"-12UN-2A (ø22.23)
1 1/16"-12UN-2A
‘K’ - Protective Cap ‘F’ - Tamper Proof Cap
1/2" HEX
1/2" HEX
1/2" HEX
(61.1)
(58.4)
2.41
2.30
1/2" HEX
(61.1)
1/2" HEX
(58.4)
2.41
(61.1)
2.30
(58.4)
2.41
Pressure
(61.1)
2.30
Rating
(61.1)
(58.4)
2.41
2.30
Operation
The DB16P blocks flow from port 1 to port 2 until the pressure setting is reached
at port 1 to lift the pilot poppet creating a pressure drop across the main spool.
This allows the main spool to shift, opening port 1 to port 2. Pressure at port 2 is
2 directly additive to valve pressure setting.
Features
• Spring ranges up to 5000 psi (350 bar)
• Positive stop prevents spring from over adjustment (options V,H)
• Adjustable under full pressure
• One-piece body maximizes reliability and minimizes the effect of eccentricity
• Low pressure drop due to an optimized flow-path
• Screen protected control orifice to enhance safety
• Fast response with excellent stability
• All external surfaces zinc-plated
• Hardened spool & pilot poppet to ensure minimal wear & extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 79 gpm (300 l/min)
Internal Leakage less than 61 cu in/min at 5000 psi
(1 l/min at 350 bar)
Reseat Pressure (Nominal) 90% of crack pressure
Optional Pressure Ranges 45 to 500 psi(3 to 35 bar)
45 to 900 psi (3 to 60 bar)
45 to 1800 psi (3 to 125 bar)
60 to 3300 psi (4 to 230 bar)
2 60 to 5000 psi (4 to 345 bar)
% of Spring Pressure Range 24%
Actuated at 1 Revolution
(Adjustment Type V, H)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
1 (Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Installation No orientation restrictions
Performance Cavity FC16-2 (see Line Bodies & Cavities section)
Measured at 158 SUS (34 cSt) Cavity Tools Rougher: 02580250
TOil= 115°F (46°C)
bar psi
Finisher: 02580251
400
5000
Cartridge Weight 1.0 Lbs. (0.465 kg)
350
Cartridge Material Steel with hardened work surfaces.
300 4000
Zinc-plated exposed surfaces.
Pressure
SW
2.64 Max.
(31.5) SW
AS16 = SAE-16 ports, aluminum body
1/2” HEX
SS16 = SAE-16 ports, steel body
(67 Mhax.)
1 1/2”
SW HEX
13 Torque 96-133 ft-lbs
2.64 Max.
Mhax.)
Max.
(67 Mhax.)
2.64 Max.
1 1/2”
1 1/2” HEX
HEX Torque
Torque 96-133
96-133 ft-lbs
ft-lbs
(67 Mhax.)
(57.2) 2.64 Max.
(67
(25.1)
(76.5) (57.2)
(25.1)
2.25
(25.1)0.99
(57.2)
2.25
2.25(57.2)
2
3.0
0.34
(8.6)
0.34
(8.6)
3.0
(76.5)
2 Thick2.0 Thick
0.34
0.34(8.6)
2.0
3.0
(8.6)
(50.8)
2.0 Thick
(50.8) K = Allen Head (HEX 5/32”) w/ cover cap
1 V = Allen Head (HEX 5/32”)
0.20 1 12.56 Setting (optional)
0.20 (5) 2.56 12.56
(65) (omit) = Set at min. pressure for the range
3.0 1 2.56
0.20
(5) 0.20
(5)0.20 (65) (65) XXX = Desired psi ÷ 10
2.56
(5)(5) 3.0 (76.5) 3.0 (65)
(65) Example: 300 = 3000 psi
(76.5) 3.0
(76.5)
3.0
(76.5)
(76.5)
Adjustment Options
‘V’ - Allen Head (std) ‘H’ - Hand
1.5 Knob
1.5 ( 38)
1.5
(67.5 Max.)
2.66 Max.
( 38) 1.5
( 38)
(67.5 Max.)
( 38)1.5
Max.)
2.66 Max.
Max.Max.
( 38)
Max.
Max.)
2.662.66
(67.5
2.66
Max.)
2.66 Max.
(67.5
(67.5 Max.)
Max.)
2.66 Max.
Max.
0.08
Max.)
(67.5Max.
(2)
0.08
(67.5
(2)
(2)
(2) 0.08
Max.)
Max.
(2)
2.66
(67.5(67.5
2.662.66
(47.5)
1.87
(47.5)
(47.5)(47.5)
1.87
(47.5)
1.87 1.87
1.87
2 2 22
2
1 1 11
ø1.13 ø1.13 ø1.13
ø1.13
(ø28.6)(ø28.6)
5/16”-12UN-2A
(ø28.6)
(ø28.6) 1
5/16”-12UN-2A
5/16”-12UN-2A
5/16”-12UN-2A ø1.13
(ø28.6)
5/16”-12UN-2A
1/2” HEX
(71.4)
2.81
(73.3)
2.89
2.81 (71.4)
2.81
(71.4)
2.81
(71.4)
2.81
(73.3) (73.3)
(73.3)
2.89
2.89
(71.4)
Pressure
Code Part No Material Weight
2.89
Rating
Aluminum, 3500 psi 1.20 lb
FH162-AS16 03037195
anodized (245 bar) (0.55 kg)
Steel, 6000 psi 3.56 lb
FH162-SS16 03032655
Zinc plated (420 bar) (1.62 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
1 Operation
The DR08-01 allows bidirectional flow between port 2 and port 1 with the spring
chamber drained through port 3. Once the pressure setting is reached at port 1,
the spool shifts to restrict the flow at port 2, thereby regulating pressure at port
1. If pressure at port 1 exceeds the setting of the valve, the spool will shift further
and relieve excess pressure through port 3. Any pressure at port 3 is directly
additive to valve pressure.
Features
• Spring ranges up to 3000 psi (210 bar)
• Positive stop prevents spring from over adjustment (options V,H)
• Adjustable under full pressure
• Stroke limiting device for enhanced safety
• Fast response
• All external surfaces zinc-plated
• Hardened poppet to ensure minimal wear and extend service life
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Nominal Flow 4 gpm (15 l/min)
Optional Pressure Ranges 50 to 500 psi (3 to 35 bar)
363 to 1200 psi (25 to 83 bar)
653 to 2200 psi (45 to 152 bar)
3 1073 to 3000 psi (74 to 210 bar)
% of Spring Pressure Range 14%
Actuated at 1 Revolution
2 (Adjustment Type V, H)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
*Consult factory for usage at temp. outside range
Fluid Compatibility Mineral-based or synthetics with
1 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Performance Installation No orientation restrictions
Measured at 158 SUS (34 cSt) Cavity FC08-3 (see Line Bodies & Cavities section)
bar psi TOil = 115o F (46o C)
3000 Cavity Tools Rougher: 02580086
200
Finisher: 02580087
2500
Cartridge Weight 0.52 Lbs. (0.235 kg)
150
2000 Cartridge Material Steel with hardened work surfaces.
Pressure
9/16” HEXNm)
(83)
(Torque 25-30
3.13
(83)
(83)
(15.2)
0.60
1” HEX1” HEX
Torque Torque
18.5-22
(Torque 18.5-22
25-30 Nm) ft-lbs
ft-lbs N = Buna-N
3.13
(83)
(15.2)
0.60
1” HEX Torque 18.5-22 ft-lbs Adjustment Range
3
(15.2)
(15.2) (15.2)
(29.7)
0.60
0.60
1.17
0.60
(29.7)
1.17
(29.7) 1.17
(66.5)
1.17
0.28
(7.1)
2.62
2
(53.8)
Adjustment Options
2.12
2 2 3
1.17
(53.8)
(53.8)
(7.1)0.28
2.62
(66.5)(66.5)
0.28
(7.1) 0.28
(7.1)
2.62
2.62 2.62
(53.8)
2.12
Adjustment Options 1
(25.4) ø1.5
1 (ø38)
‘V’ - Allen Head (std)
(25.4)
‘H’ -ø1.5
Hand Knob
1 11 (ø38)
(25.4)(25.4) ø1.5
ø1.5 ø1.5
(25.4) (ø38)
(ø38) (ø38)
3.17 Max.
(84 Max.)
3.17 Max.
(84 Max.)
2.362.36 2.36
(84 Max.)
Max.
(60)
Max.)
3.31 Max.
(84 Max.)
(60) 2.36
(60)
(84(84
Max.
(84 Max.)
0.080.08 0.08
3.17
(2)
3.31 Max.
Max.)
(60)
0.08
2.36
(60)(2)
(843.31
(2) (2)
3
(41) 0.08
(2)
3
3
1.61 1.61 1.61
(41) (41) (41)
(41) 1.61
3 2
3
2
1 2 ø0.56 (ø14.27)
1.61
1
1 2 ø0.56
ø0.56 (ø14.27)
2 (ø14.27)
ø0.63
ø0.63 (ø15.88)
(ø15.88)
ø0.63
ø3/4(ø15.88)
-16UNF- 2A
1 ø0.56
1 ø3/4(ø14.27)
-16UNF-
ø0.56 2A
(ø14.27)
ø0.95 ø3/4 -16UNF- 2A
ø0.95ø0.63 (ø15.88)
(ø24) ø0.63 (ø15.88)
ø0.95
(ø24) ø3/4 -16UNF- 2A
(ø24)
ø3/4 -16UNF- 2A
ø0.95
‘K’ - (ø24)
Protective
ø0.95 Cap ‘F’ - Tamper Proof Cap
(ø24)
9/16" 9/16"
HEX
9/16" HEXHEX
9/16" HEX
9/16" HEX
(91.6)
(85.1)
(91.6)
(91.6)
(85.1)
(85.1)
3.61
3.35
3.61
3.61
3.35
3.35
(85.1)
3.35
Rating
(91.6)
(85.1)
3.61
3.35
Operation
1 The DR10-01 allows bidirectional flow between port 2 and port 1 with the
spring chamber drained through port 3. Once the pressure setting is reached at
port 1, the spool shifts to restrict the flow at port 2, thereby regulating pressure
at port 1. If pressure at port 1exceeds the setting of the valve, the spool will shift
further and relieve excess pressure through port 3. Any pressure at port 3 is
directly additive to valve pressure setting.
Features
• Spring ranges up to 1900 psi (131 bar)
• Positive stop prevents spring from over adjustment (options V,H)
• Adjustable under full pressure
• Stroke limiting device for enhanced safety
• Fast response
• All external surfaces zinc-plated
• Hardened poppet to ensure minimal wear and extend service life
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Nominal Flow 16 gpm (60 l/min)
Optional Pressure Ranges 236 to 700 psi (17 to 48 bar)
435 to 1400 psi (30 to 96 bar)
725 to 1900 psi (50 to 131 bar)
3 % of Spring Pressure Range 14%
Actuated at 1 Revolution
(Adjustment Type V, H)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
2 (Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
1
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Performance
Cavity FC10-3 (see Line Bodies & Cavities section)
Measured at 158 SUS (34 cSt)
bar psi TOil = 115°F (46°C) Cavity Tools Rougher: 02580092
200 Finisher: 02580093
175 2500 Cartridge Weight 0.58 Lbs. (0.262 kg)
150 Cartridge Material Steel with hardened work surfaces.
2000 Zinc-plated exposed surfaces.
Pressure
125
Anodized aluminum knobs. (option H)
1500
100 Buna N or Viton® o-rings, and
75 PTFE back-up rings.
1000
50 Seal Kits Buna-N FS103-N P/N: 03071274
500 Viton® FS103-V P/N: 03049443
25
0 0 gpm
-15 -10 -5 0 5 10 15
l/min
-60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60
Relieving Reducing
Flow
(92.5)
9/16” HEX
3.25
(18.3)
0.72
9/16” HEX
Dimensions Model Code
5/32” HEX DR10-01-C-N-070 V 050
9/16” HEX Valve Model
1”
1” HEX Torque29.5-37
HEX Torque 29.5-37 ft-lbs
ft-lbs
1.38
Body & Ports
(Torque 40-50Nm)
(Torque 40-50 Nm) (35)
C = Cartridge only
(53.8)
3
2.12
5/32” HEX
(92.5)
(18.3)
0.72
(18.3)
1” HEX Torque 29.5-37 ft-lbs
0.72
9/16” HEX Seals
(Torque 40-50 Nm)
N = Buna-N
V = Viton®
(92.5)
3.25
(18.3)
0.72
Adjustment Range
0.28
(7.1)
1.38
1.38(35)
(35)
3
2.122.12
3
2.622.62
2
(18.3)
(66.5)
0.72
0.20 2 Adjustment Options
1.38
(35)
(5) (50.8)
1.38 (53.8)
2.5
2.62
(5) (50.8) (32) (omit) = Set at min. pressure for the range
ø1 1 1.25 Thick
2.5 (32) XXX = Desired psi ÷ 10
(ø 24.5)
0.20 (63.8) 2
0.28
(7.1)
(5) 0.20 1 (50.8) 1.25 Thick ø 1.5 Example: 050 = 500 psi
2
(5) (50.8) (32) (ø 38)
2.5
0.20 2 (63.8)
2.5
(5) (50.8) (63.8)
ø1 2.5
(ø 24.5) (63.8)
Adjustment Options ø 1.5
(93.5)
3.29
(ø 38)
(83.5 Max.)
3.29 Max.
‘V’ - Allen
ø 1Headø 1 (std) ‘H’ - Hand Knob
2.48
(63)
ø(ø
(ø 24.5)1 24.5)
(ø 24.5) øø 1.5
1.5
0.079
ø 1.5 (ø 38)
(ø 38)
(93.5)
3.29
(2)
(ø 38)
(83.5 Max.)(83.5 Max.)
3.29 Max. 3.29 Max.
2.48
(63)
(93.5)
(93.5)
0.079
3.29
3.29
3
(2)
Max.)
3.29 Max.
(93.5)
3.29
2.48
2.48
(63)
0.079 (63)
Max.)
3.29 Max.
1.85
(47)
(83.5(83.5
2.48
(63)
0.079
(2)
3
(2)
2
0.079
(2)
1.85
(47)
3
1 2 ø0.63
3 (ø15.88)
1.851.85
(47)
ø0.69 (ø17.45)
(47)
1 2
3 (ø15.88)
ø0.63
7/8-14
2 UNF-2A
1 ø0.69 (ø17.45)
1.85
ø0.63 (ø15.88)
(47)
ø1
(ø24.5) 17/8-14 UNF-2A
ø0.69 (ø17.45)
ø0.63 (ø15.88)
ø1 27/8-14 UNF-2A
(ø24.5)ø1 ø0.69 (ø17.45)
(ø24.5)
1 7/8-14 UNF-2A
‘K’ - Protective ø0.63 (ø15.88) ‘F’ - Tamper Proof Cap
Cap
ø1
9/16”(ø17.45)
(ø24.5)ø0.69 HEX
9/16” HEX
9/16” HEX
7/8-14 UNF-2A
ø1
(ø24.5) 9/16” HEX
(91.6)
3.61
(91.6)
3.61
(81.1)
(81.1)
3.193
3.193
(91.6)
3.61
Pressure
Code Part No Material Weight
Rating
(91.6)
3.61
9/16” HEX
(81.1)
3.193
(81.1)
3.193
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
1 Operation
The DR08P-01 allows bidirectional flow between port 2 and port 1 with the
spring chamber drained through port 3. Once the pressure setting is reached at
port 1, the spool shifts to restrict the flow at port 2, thereby regulating pressure
at port 1. If pressure at port 1 exceeds the setting of the valve, the spool will
shift further and relieve excess pressure through port 3. Any pressure at port 3 is
directly additive to valve pressure setting.
Features
• Spring ranges up to 5000 psi ( 350 bar)
• Positive stop prevents spring from over adjustment (options V,H)
• Adjustable under full pressure
• One-piece body maximizes reliability and minimizes the effect of eccentricity
• Screen protected control orifice to enhance safety
• Fast response with excellent stability
• All external surfaces zinc-plated
• Hardened spool & pilot poppet to ensure minimal wear & extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 16 gpm (60 l/min)
Optional Pressure Ranges 75 to 500 psi (5 to 35 bar)
3 75 to 900 psi (5 to 60 bar)
75 to 1800 psi (5 to 125 bar)
75 to 3300 psi (5 to 230 bar)
75 to 5000 psi (5 to 350 bar)
2 % of Spring Pressure Range 24%
Actuated at 1 Revolution
(Adjustment Type V, H)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
1 (Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Performance Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Measured at 158 SUS (34 cSt)
bar psi TOil = 115o F (46o C) Installation No orientation restrictions
400 Cavity FC08-3 (see Line Bodies & Cavities section)
5000
Cavity Tools Rougher: 02580086
300 4000 Finisher: 02580087
Pressure
5/32” HEX
Max.
2.52 Max.
(64 Max.)
Max.)
DR08P-01-C-N-180 V 100
(64
(15.2)
2.12 2.52 Max.
7/8” HEX Torque 18.5-22 ft.-lbs. SS6 = SAE-6 ports, steel body
(15.2)
(64 Max.)
0.6
3
0.6
3(Torque 25-30 Nm)
1.18
2.52 Max.
(30)
(64 Max.)
1.18
(30)
Seals
7/8” HEX Torque 18.5-22 ft.-lbs. N = Buna-N
22 V = Viton®
(53.8)
(15.2)
(Torque 25-30 Nm) Adjustment Range
(15.2) 0.6
3
(66.5)
1.18
2.62
(30)
0.28
(7.1)
0.28
(7.1)
0.6 0.6
Thick
(30) Thick 180 = 75 to 1800 psi (5 to 125 bar)
1.181.18
(30)
(15.2)
2
(30)(30)
(53.8)
2.12
2 Adjustment Options
0.28
(7.1)
(53.8)
2.12
(30) Thick
0.280.28
(7.1)(7.1)
1.13
2.0
2.0 (30) Thick H = Knurled Hand Knob
1.13
(50.8)
(50.8) (30) Thick K = Allen Head (HEX 5/32”) w/ cover cap
2.5
2.5 V = Allen Head (HEX 5/32”)
(60)1
(60)
1 Setting (optional)
1 (omit) = Set at min. pressure for the range
2.02.0 XXX = Desired psi ÷ 10
(50.8)
(50.8)
2.0
2.5
(50.8)
2.5 Example: 100 = 1000 psi
(60)
(60)
2.5
(60)
ø1.5
ø1.5
Adjustment Options (ø38)
(ø38)
‘V’ - Allen Head (std) ‘H’ - Hand Knob
Max.
(65 Max.)
2.6 Max.
2.6Max.)
ø1.5
ø1.5
(ø38)
ø1.5
(ø38)
(ø38)
(65
Max.
Max) (61 Max)
2.4 Max.
2.4Max)
(2)Max.
Max.)
0.08
Max.
Max.)
0.08
(2)
2.6 Max.
(65 Max.)
Max.(61
2.62.6
(65(65
Max.
Max)
0.08
Max.
Max)
2.4
(2) (2)
(61
0.08
2.4 2.4
(61 (61
0.08
33
(2)
(40.7)
(40.7)
1.6
1.6
22 33
(40.7)
1.61.6
(40.7)
3 22
(40.7)
11
1.6
ø0.56
ø0.56
(ø14.25)
(ø14.25) ø0.56
1 ø2
ø0.63
1 0.63
3/4-16UNF-2A
UNF-2A
ø0.56
(ø14.25)
(ø14.25)
(ø(ø 15.88)
15.88)
ø0.63
3/4-16 (øø15.88)
0.63
3/4-16 UNF-2A
ø0.56UNF-2A
3/4-16
1 (ø15.88)
(ø14.25)
‘K’ - Protective øCap
0.63 ‘F’ - Tamper Proof Cap
(ø15.88)
3/4-16 UNF-2A
1/2”
1/2” HEX
HEX
1/2” HEX
1/2” HEX
(65.1)
(65.1)
(67.8)
(67.8)
2.56
2.67
2.56
2.67
(65.1)
(67.8)
2.56
2.67
(65.1)
(67.8)
2.56
2.67
2.56
2.67
FH083-AS6 03011424
anodized (245 bar) (0.26 kg)
Steel, 6000 psi 1.70 lb
FH083-SS6 00560920
Zinc plated (420 bar) (0.77 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
1 Operation
The DR10P-01 allows bidirectional flow between port 2 and port 1 with the
spring chamber drained through port 3. Once the pressure setting is reached at
port 1, the spool shifts to restrict the flow at port 2, thereby regulating pressure
at port 1. If pressure at port 1exceeds the setting of the valve, the spool will shift
further and relieve excess pressure through port 3. Any pressure at port 3 is
additive to spring set pressure.
Features
• Spring ranges up to 5000 psi (350 bar)
• Positive stop prevents spring from over adjustment (options V,H)
• Adjustable under full pressure
• One-piece body maximizes reliability and minimizes the effect of eccentricity
• Screen protected control orifice to enhance safety
• Fast response with excellent stability
• All external surfaces zinc-plated
• Hardened spool & pilot poppet to ensure minimal wear & extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 26 gpm (100 l/min)
Optional Pressure Ranges 90 to 500 psi (6 to 35 bar)
3 90 to 900 psi (6 to 60 bar)
90 to 1800 psi (6 to 125 bar)
90 to 3300 psi (6 to 230 bar)
90 to 5000 psi (6 to 350 bar)
2 % of Spring Pressure Range 24%
Actuated at 1 Revolution
(Adjustment Type V, H)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
1 (Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Performance Use with filter rated ß10 ≥ 200.
Measured at 158 SUS (34 cSt)
Installation No orientation restrictions
bar psi TOil = 115°F (46°C)
450 Cavity FC10-3 (see Line Bodies & Cavities section)
6000
400
Cavity Tools Rougher: 02580092
350 5000 Finisher: 02580093
300
Cartridge Weight 0.44 Lbs. (0.203 kg)
Pressure
4000
250
200 3000
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
150
2000 Anodized aluminum knobs. (option H)
100
1000
Buna N or Viton® o-rings, and
50 PTFE back-up rings.
0 0 gpm
-25 -20 -15 -10 -5 0 5 10 15 20 25 Seal Kits Buna-N FS103-N P/N: 03071274
-100 -80 -60 -40 -20 0 20 40 60 80 100 l/min Viton® FS103-V P/N: 03049443
Flow
1”1”HEX
HEXTorque
Torque29.5-37
29.5-37ft-lbs
(59.5 Max.)
(31.9)
2.32 Max.
ft-lbs
1/2” HEX
(Torque
(Torque40-50
40-50Nm)
Nm)
Body & Ports
5/32” HEX
C = Cartridge only
1.26
AS8 = SAE-8 ports, aluminum body
(31.9)
(59.5 Max.)
1/2” HEX 1” HEX Torque 29.5-37 ft-lbs SS8 = SAE-8 ports, steel body
Max.) 2.32 Max.
(18.3)
0.72
(18.3)
0.72
(66.5) 2.32 Max.
(18.3)
0.72
180 = 90 to 1800 psi (6 to 125 bar)
2.62
(66.5)
2.62
(18.3)
0.72 330 = 90 to 3300 psi (6 to 230 bar)
1.38
(35)
1.38
1.25
0.28
(35) (7.1)
3(32)
1.25Thick
Thick
(18.3)
0.72
3 Adjustment Options
22
(32)
(7.1) 0.28 (66.5)
(12.7)
(12.7)
0.5
2 1.25 Thick
(7.1)
2.0
(12.7)
0.5
(5)(5) (50.8)
0.5
(50.8) (32)
Setting (optional)
2.5
(12.7)
(63.8)
(63.8)
0.20
0.20 2.0 2.0 XXX = Desired psi ÷ 10
(5) (5) 1(50.8)
(50.8)
0.20 2.0 Example: 100 = 1000 psi
(5) 2.5 2.5
(50.8)
(63.8)
2.5 (63.8)
(63.8)
Adjustment Options 1.51.5
( ( 38)
38)
‘V’ - Allen Head (std) ‘H’ - Hand Knob
2.36 Max.
Max.
(61 Max.)
1.5
(61 Max.)
( 38)
Max.
Max.)
Max.)
(61 Max.) 2.4 Max.
(61 Max.)
(61 Max.
Max.
Max.
Max.)
(0.08)(612Max.)
2.36
(0.08)
(61
(0.08)
2.36
(612
2.4
2.36
(61 Max.)
2.4 Max.
2.4 Max.
(61 Max.)
2.4 Max.
(0.08)
2
(0.08) 2
2
33
1.85
(47)
1.85
1.85 (47)
3
(47)
232
1.85
1.85 (47)
3
(47)
22
11
2
0.63 11
0.63
(15.88)
(15.88)
0.63
0.63
0.69
(15.88)
(15.88)1
0.69
(17.45)
0.69
(17.45)
0.69 7/8”-14UNF-2A
(17.45) 0.63
(17.45) 7/8”-14UNF-2A
7/8”-14UNF-2A
(15.88)7/8”-14UNF-2A
0.69
‘K’ - Protective Cap
(17.45)
‘F’ - Tamper Proof Cap
7/8”-14UNF-2A
1/2”
1/2” HEX
HEX
1/2” HEX
1/2” HEX
(65.1)
2.56
(67.8)
(65.1)
2.67
1/2” HEX
2.56
(65.1)
(67.8)
(65.1)
2.56
2.67
2.56
(67.8)
2.67
(67.8)
Pressure
Code Part No Material Weight
Rating
(65.1)
2.56
(67.8)
2.67
Features
• Variety of adjustment mechanism options
• Zinc-plated external surfaces
• One-piece body to maximize reliability and minimize effect of eccentricity
• Hardened parts to ensure minimal wear and extend service life
• Industry common cavity-compact size
Operation
1 2 The SD08-01 controls flow in either direction from fully open to leaktight
shut-off by turning the adjustment feature clock-wise. Flow is non-pressure
compensated.
Features
• All external surfaces zinc plated
• Adjustment needle cannot be backed out of the valve
• Complete shut-off
• Desired setting may be locked down
• Hardened parts to ensure minimal wear and extend service life
• Aluminum knob option for ease of adjustment
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Nominal Flow 16 gpm (60 l/min)
Adjustment Torque Required 1.25 lbf.ft at 3000 psi (1.7Nm at 210 bar)
2.21lbf.ft at 5000 psi (3.0 Nm at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
2 Cavity FC08-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580090
Finisher: 02580091
Cartridge Weight 0.25 Lbs. (0.112 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
1 Anodized aluminum knobs. (option H)
Buna N or Viton® o-rings, and
PTFE back-up rings.
Seal Kits Buna-N FS082-N P/N: 03033920
Performance Viton® FS082-V P/N: 03051756
Measured at 158 SUS (34 cSt)
bar psi TOil = 1 15°F (46°C)
400 1.25*
0.25* 0.75*
5000
Pressure Drop
300
4000
(15.5)
0.61
V = Viton®
1.65 Max.
(42 Max.)
5/32” HEX
7/8” HEX Torque 18.5 - 22 ft-lbs
(15.5)
Adjustment Options
(15.5)0.61
1.65 Max. 1.65 Max.
(15.5)
(7.1)
0.28
0.61
2
(38)1.496
(38)
(50) (50)
2.0 2.0
(7.1)
1.496
0.28
2
1.496
(38)
1
(50)
2.0
(7.1)
0.28
1
1 1.13
0.13 1.62 1.13 (28.7) Thick
0.13 (3.3) 1.62 (41.1) (28.7) Thick
1.13
(3.3)
0.13 (41.1)
1.62 Thick
(28.7)
(3.3) (41.1)
2.0
1 2.0
(50) (50)
2.0
(50) 1.13
0.13 1.62 (28.7) Thick
(3.3) (41.1)
Adjustment Options
2.0
(50)
‘V’ - Allen Head (std) ‘H’ - Hand Knob
ø0.87
(ø22.22)ø0.87
ø0.87
(ø22.22)(ø22.22)
ø1.5
ø1.5
(ø38) ø1.5
ø0.87 (ø38) (ø38)
1.69 Max.
(43 Max.)
(ø22.22)
1.69 Max.1.69 Max.
Max.)
1.69 Max.
(43 Max.)
ø1.5
(ø38)
(43 Max.)(43
1.02
(26)
1.02
Max.
(26)
(43 Max.)
1.69 Max.
Max.)
1.02
(26)
1.69 Max.
(43 Max.)
1.69
1.02
(43
(26)
1.69 Max.
(43 Max.)
22
(28)
1.1
(28)
1.1
2
(28)
1.1
11 2
(28)
ø0.5
1.1
ø0.5
(ø12.7)
(ø12.7)
3/4 - 16 UNF
3/4- 2A
- 16 UNF - 2A
‘K’ - Protective Cap
9/ 9
1/61” 6H”EH
XEX
9/ 16” HEX
(54.6) (54.6)
(54.6)
2.15 2.15
2.15
9/ 16” HEX
Standard Line Bodies*
Pressure
(54.6)
Rating
Aluminum, 3500 psi 0.34 lb
FH082-AS6 03011409
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.00 lb
FH082-SS6 00560917
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
1 2 The SD10-01 controls flow in either direction from fully open to leaktight
shut-off by turning the adjustment feature clock-wise. Flow is non-pressure
compensated.
Features
• Adjustment needle cannot be backed out of the valve
• Desired setting may be locked down
• Aluminum knob option for ease of adjustment
• Complete shut-off
• Hardened parts to ensure minimal wear and extend service life
• All external surfaces zinc-plated
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Nominal Flow 42 gpm (160 l/min)
Adjustment Torque Required 1.25 lbf.ft at 3000 psi (1.7 Nm at 210 bar)
2.21 lbf.ft at 5000 psi (3.0 Nm at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-2 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580274
Finisher: 02580274
Cartridge Weight 0.35 Lbs. (0.160 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Anodized aluminum knobs. (option H)
1 Buna N or Viton® o-rings, and
PTFE back-up rings.
Seal Kits Buna-N FS102-N P/N: 03033872
Viton® FS102-V P/N: 03051757
Performance
Measured at 158 SUS (34 cSt)
bar psi
TOil = 115o F (46o C)
400
0.25 1.50
0.75
5000
3.00
300
4000
Pressure Drop
200 3000
3.50
2000
100
1000
6.00
0 0 gpm
0 5 10 15 20 25 30 35 40
l/min
0 40 80 120 160
Flow
N = Buna-N
1.92 1.92
(18.8)
0.74
(48.7)
Adjustment Options
(48.7)
(18.8)
1.92
0.74
(18.8)
0.74
K = Allen Head (HEX 5/32”) w/ cover cap
(18.8)
0.74 V = Allen Head (HEX 5/32”)
(38.1) (38.1)
1.5 1.5
0.280.28
(7.1) (7.1)
2
(38.1)
2.132.13
2.13 (55)
(38.1)
0.281.5
(7.1)
(55) 1.5
22
0.28
(7.1)
(55)
2
2.13
(55)
1.25 Thick
1
1.25 (32)
0.20 1 11 1.77 1.25Thick
1.25 Thick
(32) Thick
(5) (45) (32) (32)
0.20 0.20
0.20 1.77 1.77
1.77
(5) (5)
(5) (45) (45)
(45) 2.13
(55)
2.13 2.13
2.13
(55) (55)
(55)
Adjustment Options
‘V’ - Allen Head (std) ‘H’ - Hand Knob
ø0.8 ø0.8
ø0.8
ø0.8 ø1.5 ø1.5
(ø20.4) (ø20.4) ø1.5
ø1.5
(ø20.4)
(ø20.4) (ø38) (ø38)
(ø38)
(ø38)
(49.7 Max.)
1.96 Max.
Max.)
Max.)
Max.
1.96 Max.
(29.2)Max.)
1.15 Max.
(49.7 Max.)
1.96 Max.
(49.7
Max.)
1.96
(49.7
(49.7 Max.)
1.96
(49.7
Max.)
Max.
(49.7Max.
1.96Max.
(29.2)
1.15
(29.2)
(29.2)
1.15
1.15
(49.7
1.96
1.96
(33)
1.3
2
(33)
1.3
(33)
1.3
22
(33)
1.3
1 2
ø0.63
(ø15.88) 11
ø0.63
ø0.63 1 7/8-14 UNF-2A
(ø15.88)
(ø15.88)
ø0.63
(ø15.88) 7/8-14
7/8-14UNF-2A
UNF-2A
7/8-14 UNF-2A
‘K’ - Protective Cap
9/16" HEX
9/16"
9/16"HEX
HEX
(57.8)
2.28
Pressure
2.28
2.28 2.28
Operation
2 1 The SDR10A-01 controls flow from port 2 to port 1 from fully open to leaktight
shut-off by turning the adjustment feature clock-wise. Flow is non-pressure
compensated. The flow from port 1 to port 2 is free.
Features
• All external surfaces zinc-plated
• Adjustment needle cannot be backed out of the valve
• Desired setting may be locked down
• Complete shut-off
• Hardened parts to ensure minimal wear and extend service life
• Aluminum knob option for ease of adjustment
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 42 gpm (160 l/min)
Adjustment Torque Required 1.25 lbf.ft at 3000 psi (1.7 Nm at 210 bar)
2.21 lbf.ft at 5000 psi (3.0 Nm at 350 bar)
Bias Spring Setting 15 psi (1 bar) Minimum
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
2 Cavity FC10-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580274
Finisher: 02580274
Cartridge Weight 0.33 Lbs. (0.150 kg)
Cartridge Material Steel with hardened work surfaces.
1 Zinc-plated exposed surfaces.
Anodized aluminum knobs. (option H)
Buna N or Viton® o-rings, and
PTFE back-up rings.
Seal Kits Buna-N FS102-N P/N: 03033872
Performance Viton® FS102-V P/N: 03051757
Measured at 158 SUS (34 cSt)
bar psi Toil = 115°F (46°C)
6000
400
1.00 1.75
0.25 2.50
5000
300
4000
Pressure Drop
200 3000
Flow: 2 to 1 3.00
2000
100
1000
5.75
0 0
0 5 10 15 20 25 30 35 40 gpm
Seals
(95.1)
1.86
(95.1)
(95.1)
N = Buna-N
1.86
1.86
V = Viton®
Bias Spring
15 = 15 psi (1.00 bar)
(18.8)
(18.8)
0.74
0.74
Adjustment Options
(18.8)
0.74
(38.1)
0.28(38.1)
2
(7.1)
22
2.13
2.13
(55)
0.28
(7.1)
0.28
1.25 Thick
Performance
1.251.25
1.25 ThickThick Measured at 158 SUS (34 cSt)
(32)Thick
(32)
(32) (32)
1 Toil = 115°F (46°C)
0.20
0.20
0.20
0.20
111 1.77
1.77
1.77
1.77
bar psi
(5) (45) 250
(5)
(5) (45)
(45)
(5) 0.87 (45)
0.87
0.87
(22)
0.87 15
(22)
(22)
(22) 2.13 200
2.13
2.13
(55)
2.13
(55)
Pressure Drop
(55)
(55) 150
10
Reverse Flow: 1 to 2
Adjustment Options 100
‘V’ - Allen Head (std) ‘H’ - Hand Knob 5
ø ø0.80
0.80
ø 0.80 50
(ø(ø20.4)
20.4)
(ø
ø 20.4)
0.80
(ø 20.4) ø1.5
ø1.5
ø1.5
(ø38) 0 0 gpm
(ø38) 0 5 10 15 20 25 30 35 40
(ø38)
(48.2 Max.)
Max.)
ø1.5
Max.
1.90 Max.
l/min
Max.)
(ø38)
Flow
Max.)
1.90
1.15 1.15 (48.2
1.90 Max.
(48.2(48.2
(29.2)
(29.2)
1.15
1.15
(29.2)(29.2)
(48.2 Max)
Max)
Max.
Max.
Max)
Max.
(48.2
1.90
1.90
(48.2
(48.2 Max)
1.90
1.90 Max.
(33)
(33)
1.3
1.3
(33) (33)
1.3 1.3
øø0.63
0.63
ø 0.63
(ø15.88)
(ø15.88)
(ø15.88)
7/8-14 UNF-2A
7/8-14 UNF-2A
7/8-14 UNF-2A
ø 0.63
‘K’ - Protective(ø15.88)
Cap
7/8-14 UNF-2A
9/16” HEX
9/16” HEX
9/16” HEX
9/16” HEX
2.28
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.40 lb
FH102-AS8 03037778
(57.8)
2.28
1 2 Operation
The SR06-01 maintains a constant flow from port 1 to port 2 based on the
setting adjustment, regardless of pressure changes downstream of port 2. The
flow rate is determined by a fixed control orifice and could be adjusted within
a limited range. Reverse flow from port 2 to port 1 is at the value of the fixed
control orifice and is non-pressure compensated.
Features
• Excellent stability throughout flow range
• Desired setting may be locked down
• Adjustment screw cannot be backed out of the valve
• All external surfaces zinc-plated
• Hardened parts to ensure minimal wear and extend service life
Specifications
Operating Pressure 5000 psi (350 bar)
Max. Operating Pressure, Port 2 3000 psi (210 bar)
Maximum Flow 4 gpm (15.2 l/min)
Flow Ranges 0.3 = 0.06 - 0.25 gpm (0.23 - 0.95 l/min)
1.0 = 0.25 - 1.0 gpm (0.95 - 3.78 l/min)
4.0 = 1.0 - 4.0 gpm (3.78 - 15.14 l/min)
Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC06-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02582046
Finisher: 02582047
2 Cartridge Weight
Cartridge Material
0.05 lb (23 g)
Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
1 Seal Kits Buna-N FS062-N P/N: 02610184
Viton® FS062-V P/N: 02610185
Performance
bar psi Measured at 135 SUS (28 cSt)
Toil = 100°F (38°C)
35 500
30 0.3 1.0
400
Reverse Flow 2 1 4.0
Pressure Drop
20 300
200
10
100
0 0 gpm
0 1 2 3 4 5
l/min
0 5 10 15 19
Flow
Setting
2.0
Performance
Measured at 135 SUS (28 cSt)
1 1.0 Thick
l/min gpm
5.0
TOil = 100°F (38°C)
2.0 3.0
(50.8) 10
Flow
2.0
ø0.56 5 1 Turn
(ø14.2) 1.0 2 Turns
3 Turns
4 Turns
5 Turns
0 0 psi
0 1000 2000 3000 4000 5000
bar
0 50 100 150 200 250 300 350
Pressure
3 0.8
0.6
Flow
2
0.4 1 Turn
2 Turns
1 3 Turns
0.2 4 Turns
5 Turns
0 0 psi
0 1000 2000 3000 4000 5000
bar
(21.4)
2
0 50 100 150 200 250 300 350
0.84
Pressure
1
ø0.47
Standard Line Bodies*
(ø11.9) Pressure
Code Part No Material Weight
9/16-18 UNF-2A Rating
Aluminum, 3500 psi 0.34 lbs
FH062-AS4 02600491
ø0.69 anodized (245 bar) (0.15 kg)
(ø17.5) Steel, 6000 psi 1.0 lbs
FH062-SS4 02600490
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
1 2 The SR08-01 maintains a constant flow from port 1 to port 2 based on the setting
adjustment, regardless of pressure changes downstream of port 2. The flow rate
is determined by a fixed control orifice and could be adjusted within a limited
range. Reverse flow from port 2 to port 1 is at the value of the fixed control orifice
and is non-pressure compensated.
Features
• All external surfaces zinc plated
• Adjustment screw cannot be backed out of the valve
• Excellent stability throughout flow range
• Reverse flow capability
• Desired setting may be locked down
• Hardened parts to ensure minimal wear and extend service life
• One-piece body maximizes reliability and minimizes the effect of eccentricity
• Aluminum knob option for ease of adjustment
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Max. Operating Pressure, Port 2 3000 psi (210 bar)
Nominal Flow 7 gpm (27 l/min)
Adjustment Torque Required 1.25 lbf.ft at 3000 psi (1.7Nm at 210 bar)
2.21lbf.ft at 5000 psi (3.0 Nm at 350 bar)
Flow Ranges 0.25 - 0.40 gpm (0.95 - 1.50 l/min)
0.30 - 0.53 gpm (1.15 - 2.00 l/min)
0.53 - 0.95 gpm (2.00 - 3.60 l/min)
0.87 - 1.66 gpm (3.30 - 6.30 l/min)
1.42 - 2.55 gpm (5.40 - 9.70 l/min)
2 2.30 - 4.40 gpm (8.80 - 16.7 l/min)
3.70 - 7.10 gpm (14.0 - 27.0 l/min)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
1
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Performance
Installation No orientation restrictions
Measured at 158 SUS (34 cSt)
l/min gpm Toil = 115°F (46°C) Cavity FC08-2 (see Line Bodies & Cavities section)
30 8 Cavity Tools Rougher: 02580090
7 Finisher: 02580091
6
Cartridge Weight 0.25 Lbs. (0.112 kg)
20 Cartridge Material Steel with hardened work surfaces.
5
Zinc-plated exposed surfaces.
Flow
Pressure
9/16” HEX
5/32” HEX 7/8” HEX
Torque 18.5-22 ft-lbs
7/8” 25-30
HEX Nm)
2.06 Max.
(15.5)
(Torque
0.61
Torque 18.5-22 ft-lbs Valve Model
9/16” HEX (Torque 25-30 Nm) Body & Ports
(52.3
(15.5)
0.610.61
2.06
2
2.06 Max.
(15.5)
(Torque 25-30 Nm) SS6 = SAE-6 ports, steel body
Seals
1.50
(38)
N = Buna-N
0.28
(7.1)
(50)
2.0
(15.5)
0.61
V = Viton®
2 Flow Rate
1.50
(38)
1.50
(38)
2 1.0
1.8
=
=
0.53 - 0.95 gpm (2.00 - 3.60 l/min)
0.87 - 1.66 gpm (3.30 - 6.30 l/min)
1 2.8 = 1.42 - 2.55 gpm (5.40 - 9.70 l/min)
1.50
(38)
1.13
0.28
(7.1)
(50)
(ø38)
2.1 Max.
20 300
Pressure Drop
(53.3 Max.)
1.27(53.3 Max.)
ø0.80 250
2.1 Max.
(32.2) (32.2)
Max.
1.27 1.27
2.1Max.)
(ø20.4) 15
(ø38) 200
Max.)
Max.
2.1 Max. (53.3
Max.)
150
Max.
10
1.1 1.1 (32.2)
(53.3
2.12.1
100
(53.3 Max.)
5
(28) (28)
50
2
(53.3 Max.)
(32.2)
0 0 gpm
(28)1.27
2 0 1 2 3 4 5 6 7 8
1.1
ø0.5
1 2 0 10
Flow
20 30 l/min
(ø12.7)
ø0.5
1 3/4 - 16 UNF-2A
(ø12.7) 1
(28)
ø0.5
1.1
3/4 - 16 UNF-2A
‘K’ - Protective Cap ‘F’ - Tamper Proof Cap
ø0.5
1
(ø12.7)
3/49-/ 116 UNF-2A
6” HEX
9/ 16” HEX
( 54.3)
9/ 16” HEX
( 60(.680) .8)
( 54.3) ( 542.3.1) 4
2.324.34
Pressure
Code Part No Material Weight
( 60.8)
Rating
2.34
2.14
2.34
Operation
1 2 The SR10-01 maintains a constant flow from port 1 to port 2 based on the setting
adjustment, regardless of pressure changes downstream of port 2. The flow rate
is determined by a fixed control orifice and could be adjusted within a limited
range. Reverse flow from port 2 to port 1 is at the value of the fixed control orifice
and is non-pressure compensated.
Features
• Excellent stability throughout flow range
• Reverse flow capability
• Desired setting may be locked down
• Adjustment screw cannot be backed out of the valve
• All external surfaces zinc-plated
• Aluminum knob option for ease of adjustment
• Hardened parts to ensure minimal wear and extend service life
• One-piece body maximizes reliability and minimizes the effect of eccentricity
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Max. Operating Pressure, Port 2 3000 psi (210 bar)
Nominal Flow 10 gpm (38 l/min)
Adjustment Torque Required 1.25 lbf.ft at 3000 psi (1.7Nm at 210 bar)
2.21lbf.ft at 5000 psi (3.0 Nm at 350 bar)
Flow Ranges and Accuracy 1.0 - 3.5 gpm (4 - 13 l/min) ±10%
3.5 - 10.0 gpm (13 - 38 l/min) ±10%
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
2 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
1
Cavity FC10-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580274
Finisher: 02580247
Performance Cartridge Weight 0.35 Lbs. (0.16 kg)
Measured at 34 cSt (158 SUS) Cartridge Material Steel with hardened work surfaces.
l/min gpm Zinc-plated exposed surfaces.
T Oil = 46°C (115°F) Anodized aluminum knobs. (option H)
40 10.6
Buna N or Viton® o-rings, and
PTFE back-up rings.
30 7.9 Seal Kits Buna-N FS082-N P/N: 03033872
Viton® FS082-V P/N: 03051757
20 5.3
Flow
10 2.6
0 0 psi
0 1450 2900 4350 5800
0 100 200 300 400 bar
Pressure
1” Hex
(18.8)
(18.8)
9/16” HEX
1.74
1.74
Torque 29.5-37 ft-lbs
5/32” HEX (Torque 40-50 Nm) SR10-01-C-N-3.5 V 1.8
1” Hex Valve Model
2.09 Max.
(53 Max.)
1.74
(38.1)
(38.1)
Max.)
0.28
(53 0.28
(7.1)
(7.1)
Seals
22
1.74
N = Buna-N
(2.1)
2.09
55
55
V = Viton®
(18.8)
Flow Rate
1.5 (38.1)
1.5
2
(38.1)
Adjustment Options
55 (2.1)
55
0.28
(7.1)
2
(38.1)
0.28
(7.1)
2 (32)
(32) H = Knurled Hand Knob
(2.1)
0.2
0.2 1.77
1.77
55
30
2.13 Max.
2.13 Max. 2.13 Max.
435
(54 Max.)
Max. (54 Max.)
ø0.8
ø0.8 ø0.8
(ø20.4)
(ø20.4)(ø20.4) ø1.5
ø1.5
ø1.5 Flow path 2 1
(ø38)
(ø38) 20 290
(33.5)
(33.5)
2.13 Max.
Max. 2.13 Max.
1.32
1.32
(54 Max.)
Max.(54 Max.)
(33.5) 2.13 Max.
(54 Max.)
Max.)
2.13Max.)
10 145
(54
(33.5)
(54
1.32
(54 Max.)
(33) 1.32
Max.)
gpm
(33.5)
0 0
2.13Max.
1.32
(54Max.)
0 2 4 6 8 10
2.13
(33)
1.3
1.3
0 10 20 30 40 l/min
2.13
22
(54
Flow
(33)
1.3
2
(33)
(33)1.3
11 2
1.3
ø15.88
ø15.88
(ø0.63)
(ø0.63) 2
1
ø15.88 7/8-14
7/8-14UNF-2A
UNF-2A
ø15.88
1
(ø0.63)
7/8-14 UNF-2A
ø15.88
(ø0.63) 1 7/8-14 UNF-2A
(ø0.63)
7/8-14 UNF-2A
‘K’ - Protective Cap ‘F’ - Tamper Proof Cap
9/91/61”6H
” 9E
H/XE
16X” HEX
9/ 16” HEX
(57.8)
2.28
(55.1)
2.17
(57.8)
2.28 (57.8)
2.28
2.28
(55.1)
(55.1)(55.1)
2.17
2.17 2.17
9/ 16” HEX
Standard Line Bodies*
(57.8)
Pressure
Code Part No Material Weight
Rating
(57.8)
2.28
(55.1)
2.17
1 3 Operation
The SRP08-01 maintains a constant priority flow from port 1 to port 3 based on
the setting adjustment, regardless of pressure changes downstream of port 3 or
in the bypass line at port 2. The flow rate is determined by a fixed control orifice
2 and could be adjusted within a limited range. Flow in excess of the priority setting
is directed to port 2. If the priority flow at port 3 is blocked, the spool will shift,
thereby closing off flow to port 2.
Features
• Excellent stability throughout flow range
• Reverse flow capability
• Desired setting may be locked down
• Adjustment screw cannot be backed out of the valve
• Bypass port 2 may be fully pressurized
• All external surfaces zinc-plated
• Aluminum knob option for ease of adjustment
• Hardened parts to ensure minimal wear and extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8 gpm (30 l/min)
Flow Ranges 0.34 - 0.47 gpm (1.30 - 1.80 l/min)
0.42 - 0.66 gpm (1.60 - 2.50 l/min)
0.53 - 1.00 gpm (2.00 - 3.70 l/min)
0.92 - 1.70 gpm (3.50 - 6.50 l/min)
1.60 - 3.30 gpm (6.00 - 12.5 l/min)
2.30 - 5.50 gpm (8.80 - 20.8 l/min)
Adjustment Torque Required 1.25 lbf.ft at 3000 psi (1.7Nm at 210 bar)
2.21lbf.ft at 5000 psi (3.0 Nm at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Performance Installation No orientation restrictions
Measured at 158 SUS (34 cSt) Cavity FC08-3 (see Line Bodies & Cavities section)
l/min gpm T Oil = 115°F (46°C)
30 8 Cavity Tools Rougher: 02580086
Finisher: 02580087
7
Cartridge Weight 0.35 Lbs. (0.15 kg)
6
20
Cartridge Material Steel with hardened work surfaces.
5 Zinc-plated exposed surfaces.
Flow
7/8” HEX
Torque 18.5-22 ft-lbs
(52.3 Max.)
(52.3Max.
(15.2)
Body & Ports
0.60
(15.2)
2.06
5/32” HEX
0.60
7/8” HEX
Torque 18.5-22 ft-lbs C = No Line Body, cartridge only
9/16” HEX (Torque 25-30 Nm) AS6 = SAE-6 ports, aluminum body
SS6 = SAE-6 ports, steel body
(52.3 Max.)
2.06 Max.
33
(29.7)
1.17
(29.7)
Seals
(53.8)Max.)
1.17
Max.)Max.
N = Buna-N
(15.2)
22
(15.2) 0.60
(53.8)
2.12
Max.
V = Viton®
2.12
(15.2)
(52.32.06
(52.3
0.60
(66.5)
2.62
(66.5)
2.62
Flow Rate
2.06
1.17 0.28
0.60
(7.1)
1.17(29.7)0.28
1.17 (7.1)
1.13
(66.5)
2.12
2.62
1.13
Thick
2
(53.8)
(28.7)
0.28
(66.5)
2.02.0
2.62
(50.8)
(7.1)
(50.8)
Adjustment Options
2.52.5 F = Factory pre-set, non-adjustable
(60)(60)
(must specify setting below)
11
1.13
Thick H = Knurled Hand Knob
1.13 Thick
2.0
1 (28.7)1.13 Thick
(28.7)
(28.7)
K = Allen Head (HEX 5/32”) w/ cover cap
2.0 V = Allen Head (HEX 5/32”)
(50.8) 2.0
(50.8)
(50.8) Setting
2.5
2.5
blank = Set at 50% of maximum flow for the range
(60) 2.5
(60)
ø0.80 (60)
ø1.5
ø1.5 xxx = flow rate in gpm
ø0.80 (ø38)
(ø20.4)
(ø20.4) (ø38) Example: 0.8 = 0.8 psi
Adjustment Options
Max.)
(53.3 Max.)
2.1 Max.
ø0.80 ø1.5
(53.3
(ø38)ø1.5
Max)
2.1 Max.
(ø20.4)
(53.3 Max)
ø0.80
Max.
(32.2)
2.1 Max. 1.27
(ø38) ø1.5
(32.2)
(53.3 Max.) 1.27
ø0.80
(ø20.4)
(ø38)
(53.3
(ø20.4)
2.1
(53.3 Max.)
2.1 Max.
(53.3 Max)
(53.3 Max.)
2.1 Max.
Max.
1.27 (32.2)
(32.2) 1.27
33
(53.3 Max)
2.1 Max.
(41.3)
2.1
(53.3 Max)
1.63
1.27
(41.3)
2.1 Max.
1.63
(32.2)
22
3
(41.3)
1.63
ø0.56 11
ø0.56
(ø14.26)
(ø14.26) 32
3
(41.3)
1.63
(41.3)
ø0.63
1.63
ø0.63
(ø15.88)
(ø15.88)
ø0.56 1 2- 16- 16UNF-2A
3/43/4 UNF-2A
(ø14.26) 2
ø0.63
ø0.56
(ø15.88)1 3/4 - 16 UNF-2A
ø0.56
(ø14.26) 1
‘K’ - Protective Cap
(ø14.26) ‘F’ - Tamper Proof Cap
ø0.63
(ø15.88)ø0.63
(ø15.88) 3/4 - 16 UNF-2A
93/4
/ 196/-”116
H XUNF-2A
6”EHEX
9/ 16” HEX
(60.8)
(54.3)
2.39
2.14 2.14
2.39(60.8)
(54.3)
2.39
(54.3) 2.14
Pressure
Code Part No Material Weight
Rating
9/ 16” HEX
9/ 16” HEX Aluminum, 3500 psi 0.34 lb
FH083-AS6 03011424
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.00 lb
FH083-SS6 00560920
(60.8)
(54.3)
2.39
2.14
(54.3)
2.14
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
In the dividing mode, ST10-01 divides the input flow on port 3 between ports 2
and 4, based on the specified ratio, regardless of the operating pressure. In the
combining mode, the flow from ports 2 and 4 will be combined into port 3. The
division or combining will be maintained even if unequal loads are placed on
3 ports 2 and 4.
The ST10-01 provides synchronizing flow in both combining and dividing modes
at bottomed conditions in cylinder applications and at stalled conditions in motor
applications. This feature is useful in hydraulic circuits that require cylinders to
move at the same time. If one cylinder bottoms out first, the opposite cylinder is
provided with a synchronizing flow to allow that cylinder to bottom before both
cylinders start moving in the opposite direction.
Features
• All external surfaces zinc-plated
• Hardened parts to ensure minimal wear and extend service life
• One piece body maximizes reliability and minimizes the effects of eccentricity
• High accuracy operation
• Wide flow range down to 25% of nominal flow rating
4 •
•
Low pressure drop
Provides re-synchronizing flow after completion of the actuator cycle
• Industry common cavity
Specifications
3 Operating Pressure 5000 psi (350 bar)
Max. Input Flow 12 gpm (45 l/min)
Inlet Flow Options 2 gpm (7.6 l/min)
4 gpm (15.2 l/min)
6 gpm (22.8 l/min)
8 gpm (30.4 l/min)
2 10 gpm (37.8 l/min)
12 gpm (45.6 l/min)
Minimum Input Flow Not less than 25% of Nominal Input flow
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-Based or Synthetics with
1 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Flow Division Accuracy Installation No orientation restrictions
Measured at 158 SUS (34 cSt)
Toil = 115°F (46°C) Cavity FC10-4 (see Line Bodies & Cavities section)
11, 22, 33 Cavity Tools Rougher: 02580249
44 Finisher: 02582048
10 55
66 Cartridge Weight 0.27 lb (.122 kg)
5 Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Accuracy %
0
Buna N or Viton® o-rings, and
PTFE back-up rings.
-5 Seal Kits Buna-N FS104-N P/N: 03051912
Viton® FS104-V P/N: 03071275
-10
0 20 40 60 80 100
% of Maximum Nominal Flow
(18.8)
0.74
1.16
(29.5) Body & Ports
(35.05)
(18.8)
N = Buna-N
0.74
(95.1)
(51.3)
V = Viton®
3.74
2.02
(35.05)
1.38
4
*Synchronization flow rate
Ratio Ratio Max. inlet
(95.1)
Combining Dividing
(51.3)
3.74
2.02
(82.6)
2-4 2-4
11 50 50 2 (7.6) 0.18 (0.7) 0.18 (0.7)
(82.6)
2
3.25
12
150
(13)
8
100
0.08
(2)
50 4
4
0.08
(2)
0 0 gpm
0 2 4 6 8 10 12 14 16
0 20 40 60 l/min
(63.5)
43
2.5
Flow Rate
(63.5)
32
2.5
1
ø 0.625
(ø 15.88)
ø 0.688
2
(ø 17.48)
ø 0.75
17/8-14 UNF-2A
(ø 19.05)
ø 0.625
(ø 15.88) Standard Line Bodies*
ø 0.688 Code Part No Material
Pressure
Weight
(ø 17.48) Rating
ø 0.75 Aluminum, 3500 psi 0.34 lbs
FH1041-AS8** 02593311
(ø 19.05) anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.00 lbs
FH1041-SS8** 02593312
7/8-14 UNF-2A Zinc plated (420 bar) (0.45 kg)
*Please refer to Line Bodies & Cavities section for details
All measurements in inches (mm). **Standard line body (FH104) port 1 must be plugged when used with ST10.
Subject to technical modifications Use SAE-8 plug, HYDAC part #02580005
Operation
In the dividing mode, ST16-01 divides the input flow on port 3 between ports 2
and 4, based on the specified ratio, regardless of the operating pressure.
In the combining mode, the flow from ports 2 and 4 will be combined into port 3.
The division or combining will be maintained even if unequal loads are placed on
3 ports 2 and 4.
The ST16-01 provides synchronizing flow in both combining and dividing modes
at bottomed conditions in cylinder applications and at stalled conditions in motor
applications. This feature is useful in hydraulic circuits that require cylinders to
move at the same time. If one cylinder bottoms out first, the opposite cylinder is
provided with the synchronizing flow to allow that cylinder to bottom before both
cylinders start moving in the opposite direction.
Features
• High accuracy operation
• Low pressure drop
• Wide flow range down to 25% of nominal flow rating
• Provides re-synchronizing flow after completion of the actuator cycle
4 •
•
All external surfaces zinc-plated
Hardened parts to ensure minimal wear and extend service life
• One-piece body maximizes reliability and minimizes the effect of eccentricity
• Industry common cavity
Specifications
3 Operating Pressure 5000 psi (350 bar)
Maximum Input Flow 40 gpm (150 l/min)
Inlet Flow Options 24 gpm (90 l/min)
30 gpm (115 l/min)
40 gpm (150 l/min)
Minimum Input Flow Not less than 25% of Nominal Input flow
2 Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
1 Installation No orientation restrictions
Cavity FC16-4 (see Line Bodies & Cavities section)
Flow Division Accuracy Cavity Tools Rougher: 02580253
Measured at 158 SUS (34 cSt) Finisher: 02580252
TOil = 115°F (46°C)
Cartridge Weight 1.02 lb (.465 kg)
10
1212 Cartridge Material Steel with hardened work surfaces.
1515
2020
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings, and
5 PTFE back-up rings.
Seal Kits Buna-N FS164-N P/N: 03181644
Accuracy %
-5
-10
0 20 40 60 80 100
% of Maximum Nominal Flow
(25.9)
1.02
(50) Valve Model
1 1/2” HEX
Torque 90-110 ft-lbs Body & Ports
(55.4)
0.79
(82.25)
3.24
Seals
(25.9)
1.02
N = Buna-N
(132)
V = Viton®
5.20
(55.4)
2.18
(82.25)
5.20 4.49
3.24
Ratio Ratio
Max. inlet flow *Synchronization
Code Port Port
gpm (l/min) flow rate gpm (l/min)
3 (%) 4 (%)
3 2 1212 50 50 24 (90) 1.8 (6.7)
(114)
4.49
Performance
0.28
(7.1)
(5.0)
(7.1)
4.0 (50) 12
(100) 150
2020
8
100
0.83 0.83
4
(21) (21)
50
0 0 gpm
0 10 20 30 40
0.080.08
l/min
(2) (2)
33
(104.2)
(104.2)
4.1
4.1
22
1
1
ø1
ø125.43)
(ø Standard Line Bodies*
(ø 25.43)
(ø1.063) Pressure
(ø 27) Code Part No Material Weight
(ø1.063) Rating
(ø ø27)
1.126 Aluminum, 3500 psi 3.00 lb
FH1641-AS16** 02593313
(ø 28.6) anodized (245 bar) (1.36 kg)
ø1.126 1 5/16-12 UN-2A
Steel, 6000 psi 8.8 lb
(ø 28.6) FH1641-SS16** 02593314
1 5/16-12 UN-2A Zinc plated (420 bar) (4.00 kg)
*Please refer to Line Bodies & Cavities section for details
All measurements in inches (mm). **Standard line body (FH164) port 1 must be plugged when used with ST16.
Subject to technical modifications Use SAE-16 plug, HYDAC part #02581224.
1 2 Operation
The RP08A allows flow from port 2 to port 1, while normally blocking flow from
port 1 to port 2. The valve remains closed by bias spring until sufficient pressure
is applied at pilot port 3. The cartridge has 3:1 and 4:1 optional pilot ratios,
meaning that at least one-third or one-fourth (respectively) of the load pressure
held at port 1 is required at port 3 to open the valve. A sealed pilot piston option
is available.
3
Features
• Hardened poppet to ensure extended service life and low leakage
• Additional reseating spring for fast and reliable closing
• Optional sealed pilot piston
• Higher flow rating and low pressure drop due to pilot port at 3.
• Same cavity as counterbalance valve RS08.
• All external surfaces zinc-plated or specifically treated
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Nominal Flow 10 gpm (38 l/min)
Internal Leakage 2 drops/min. at 6000 psi
(0.10 cc/min at 420 bar)
3 Pilot Ratio 3:1, 4:1
Standard Check Bias Spring 15 psi (1.0 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
2 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC08-3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580086
Finisher: 02580087
Cartridge Weight 0.19 Lbs. (0.09 kg)
1
Cartridge Material Steel with hardened work surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Seal Kits Buna-N FS083-N P/N: 03054795
Viton® FS083-V P/N: 02591059
C = Cartridge only
AS6 = SAE-6 Ports, aluminum Body
SS6 = SAE-6 Ports, steel Body
Seals
N = Buna-N
3 NS = Buna-N with Sealed Piston
(29.7)
V = Viton®
1.17
(15.2)
2.62
0.60
Cracking Pressure
15 = 15 psi (1.00 bar)
Pilot Ratio
(53.8)
0.28
(7.1)
2.12
3 = 3:1
4 = 4:1
Performance
1.13 Thick 3:1 Pilot Ratio
1 (30) Measured at 158 SUS (34 cSt)
bar psi
0.18 2.0 TOil = 115°F (46°C)
(4.6) (50.8) 400
25
Pressure Drop 1 2
2.5 20 300 2 1
(60)
15
200
10
100
5
0 0 gpm
0 2 4 6 8 10 12
(16.5)
0.65
0 5 10 15 20 25 30 35 40 45 l/min
Flow
0.08
(2.0)
20 300 2 1
15
200
(41.2)
1.62
10
100
5
0 0 gpm
0 2 4 6 8 10 12
0 5 10 15 20 25 30 35 40 45 l/min
1 2 Operation
The RP10A allows flow from port 2 to port 1, while normally blocking flow from
port 1 to port 2. The valve remains closed by bias spring until sufficient pressure
is applied at pilot port 3. The cartridge has 3:1 and 4:1 optional pilot ratios,
meaning that at least one-third or one-fourth (respectively) of the load pressure
held at port 1 is required at port 3 to open the valve. A sealed pilot piston option
is available.
3
Features
• Hardened poppet to ensure extended service life and low leakage
• Additional reseating spring for fast and reliable closing
• Optional sealed pilot piston
• Higher flow rating and low pressure drop due to pilot port at 3.
• All external surfaces zinc-plated
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Nominal Flow 16 gpm (60 l/min)
Internal Leakage 2 drops/min. at 6000 psi
(0.10 cc/min at 420 bar)
Pilot Ratio 3:1, 4:1
Standard Check Bias Spring 15 psi (1.0 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
3 (Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-3 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580092
Finisher 02580093
Cartridge Weight 0.31 Lbs.
(0.14 kg)
Cartridge Material Steel with hardened work surfaces.
1 Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Seal Kits Buna-N FS103-N P/N: 03071274
Viton® FS103-V P/N: 03049443
(18.3)
0.72
AS8 = SAE-8 Ports, aluminum Body
(18.4)
0.69
Cracking Pressure
2.12
(66.5)
2
2.62
Performance
0.28
(7.1)
0 0
0 5 10 15 20 gpm
(18.5)
0.73
0 10 20 30 40 50 60 70 l/min
Flow
0.08
(2.0)
20 300 2 1
15
1.81
(46)
200
10
100
5
0 0 gpm
0 5 10 15 20
ø0.63 (ø15.88) l/min
0 10 20 30 40 50 60 70
Flow
ø0.69 (ø17.48)
1 2 Operation
The RP16A allows flow from port 2 to port 1, while normally blocking flow from
port 1 to port 2. The valve remains closed by bias spring until sufficient pressure
is applied at pilot port 3. The cartridge has 3:1 and 4:1 optional pilot ratios,
meaning that at least one-third or one-fourth (respectively) of the load pressure
held at port 1 is required at port 3 to open the valve.
Features
• Hardened poppet to ensure extended service life and low leakage
• Additional reseating spring for fast and reliable closing
• Optional sealed pilot piston
• Higher flow rating and low pressure drop due to pilot port at 3.
• All external surfaces zinc-plated
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Nominal Flow 40 gpm (150 l/min)
Internal Leakage 2 drops/min. at 6000 psi
(0.10 cc/min at 420 bar)
Pilot Ratio 3:1, 4:1
3 Standard Check Bias Spring 15 psi (1.0 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC16-3 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher:
Finisher:
02580094
02580095
Cartridge Weight 1.13 Lbs. (0.51 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
1 Seal Kits Buna-N FS163-N P/N: 03071303
Viton® FS082-V P/N: 03071304
(25.9)
1.02
NS = Buna-N with Sealed Piston
3
(55.4)
2.18
V = Viton®
VS = Viton® with Sealed Piston
Cracking Pressure
3.39
(86)
3 = 3:1
4 = 4:1
Performance
3:1 Pilot Ratio
1
0.34
0 gpm
0.98
0
(25)
0.08
0 10 20 30 40
(2)
l/min
0 25 50 75 100 125 150
Flow
400
(75)
25
Pressure Drop
1 2
20 300 2 1
15
200
10
100
5
ø1.06 (ø27)
0 0 gpm
0 10 20 30 40
ø1.13 (ø28.6) l/min
0 25 50 75 100 125 150
Flow
1 5/16-12 UN-2B
Operation
2 1 The RV06A allows flow from port 1 to port 2, while normally blocking flow in the
opposite direction.
The valve remains closed by bias spring until sufficient pressure is applied at port
1at which time the ball lifts off the seat and allows flow from port 1 to port 2.
Features
• ardened closing element to ensure extended service life and low leakage
H
• Multiple bias spring options for back pressure application flexibility
• Fast closing and seating
• All external surfaces zinc-plated
Specifications
Operating Pressure 5000 psi (350 bar)
Maximum Flow Rate 5 gpm (19 l/min)
Internal Leakage 5 drops/min at 5000 psi (350 bar)
Standard Cracking Pressures 5 psi (0.35 bar)
30 psi (2.1 bar)
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Fluid Compatibility Mineral-Based or Synthetics
with lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC06-2 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02582046
Finisher: 02582047
Cartridge Weight 0.1 lb (45 g)
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
1 Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
Seal Kits Buna-N FS062-N P/N: 02610184
Viton® FS062-V P/N: 02610185
Performance
Measured at 135 SUS (28 cSt)
bar psi TOil = 100°F (38°C)
300
20
250
Pressure Drop
15
200
10 150
100
5
50
0 0 gpm
0 1 2 3 4 5
l/min
0 5 10 15 19
Flow
0.55
(14)
Cracking Pressure
5 = 5 psi (0.35 bar)
30 = 30 psi (2.1 bar)
(38.1)
1.5
(56.6)
2
2.23
(50.8)
2
0.28
(7.1)
1
0.25 1.5 1.0 Thick
(6.4) (38.1) (25.4)
2.0
(50.8)
0.25
(6.4)
0.06
(1.5)
(20.8)
0.82
1
ø0.47
(ø11.9)
9/16-18 UNF-2A
ø0.69
(ø17.5)
2 1 Operation
The RV08A allows flow from port 1 to port 2, while normally blocking flow in the
opposite direction. The valve remains closed by bias spring until
sufficient pressure is applied at port 1 at which time the ball lifts off the seat and
allows flow from port 1 to port 2.
Features
• Hardened closing element to ensure extended service life and low leakage
• Multiple bias spring options for back pressure application flexibility
• Fast closing and seating
• Low pressure drop
• All external surfaces zinc-plated
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Nominal Flow 10 gpm (38 l/min)
Internal Leakage >2 drops/min. at 6000 psi
(0.10 cc/min at 420 bar)
Standard Cracking Pressures 5 psi (0.35 bar)
15 psi (1.00 bar)
30 psi (2.00 bar)
70 psi (5.00 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
2 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
1 Cavity FC08-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580090
Finisher 02580091
Cartridge Weight 0.13 Lbs. (0.06 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Performance Buna N or Viton® o-rings.
PTFE back-up rings.
Measured at 158 SUS (34 cSt)
bar psi
o o
Toil = 115 F (46 C) Seal Kits Buna-N FS082-N P/N: 03033920
10 150 Viton® FS082-V P/N: 03051756
100
50
Cracking Pressure 5 psi
0 0 gpm
0 2 4 6 8 10
l/min
0 5 10 15 20 25 30 35
Flow
(15.5)
(50)
1 0.61
1.13 Thick
0.13 1.62
(28.7)
(3.3) (41.1)
2.0
(50)
1/4” HEX
0.37
(9.5)
0.08
(2.0)
(28)
1.1
ø0.5
(12.7)
Standard Line Bodies*
Pressure
Code Part No Material Weight
3/4 - 16 UNF -2A Rating
Aluminum, 3500 psi 0.34 lb
FH082-AS6 03011409
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lb
FH082-SS6 00560917
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
2 1 The RV10A allows flow from port 1 to port 2, while normally blocking flow in
the opposite direction. The valve remains closed by bias spring until sufficient
pressure is applied at port 1 at which time the ball lifts off the seat and allows
flow from port 1 to port 2.
Features
• Hardened closing element to ensure extended service life and low leakage
• Multiple bias spring options for back pressure application flexibility
• Fast closing and seating
• Low pressure drop
• All external surfaces zinc-plated
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Nominal Flow 21 gpm (80 l/min)
Internal Leakage <2 drops/min. at 6000 psi
(0.10 cc/min at 420 bar)
Standard Cracking Pressures 5 psi (0.35 bar)
15 psi (1.00 bar)
30 psi (2.00 bar)
70 psi (5.00 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
2 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-2 (see Line Bodies & Cavities section)
1 Cavity Tools Rougher: 02580274
Finisher: 02580247
Cartridge Weight 0.22 Lbs. (0.10 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Performance Anodized aluminum knobs. (option H)
Buna N or Viton® o-rings.
Measured at 158 SUS (34 cSt) PTFE back-up rings.
bar psi TOil = 115o F (46o C)
Seal Kits Buna-N FS102-N P/N: 03033872
Viton® FS102-V P/N: 03051757
70 psi
10 150
Pressure Drop
100
30 psi
5
50
15 psi
05 psi
0 0 gpm
0 5 10 15 20
l/min
0 10 20 30 40 50 60 70 80
Flow
0.752
(18.8)
05 = 5 psi (0.35 bar)
2 15 = 15 psi (1.00 bar)
(38.1)
1.5
(68.5)
1 1.25 Thick
(32)
0.2 1.77
(5) (45)
2.13
(55)
1/4” HEX
0.47
(12)
0.08
(2)
1.30
(33)
ø 0.63 (ø 15.88)
7/8-14 UNF-2A
Standard Line Bodies*
Pressure
Code Part No Material Weight
ø1 Rating
(ø 25.4) Aluminum, 3500 psi 0.40 lb
FH102-AS8 03037778
anodized (245 bar) (0.18 kg)
Steel, 6000 psi 1.16 lb
FH102-SS8 03037612
Zinc plated (420 bar) (0.53 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
2 1 The RV12A allows flow from port 1 to port 2, while normally blocking flow in
the opposite direction. The valve remains closed by bias spring until sufficient
pressure is applied at port 1 at which time the poppet lifts off the seat and allows
flow from port 1 to port 2.
Features
• Hardened closing element to ensure extended service life and low leakage
• Multiple bias spring options for back pressure application flexibility
• Fast closing and seating
• Low pressure drop
• Fully guided check
• All external surfaces zinc-plated
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Nominal Flow 31 gpm (120 l/min)
Internal Leakage <2 drops/min. at 6000 psi
(0.10 cc/min at 420 bar)
Standard Cracking Pressures 5 psi (0.35 bar)
12 psi (0.80 bar)
25 psi (1.70 bar)
50 psi (3.40 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
2 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
1 Cavity FC12-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580667
Finisher: 02580668
Cartridge Weight 0.44 Lbs. (0.20 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Performance Buna N or Viton® o-rings.
Measured at 158 SUS (34 cSt) PTFE back-up rings.
bar psi Toil = 115oF (46oC)
Seal Kits Buna-N FS122-N P/N: 03071298
8
120 Viton® FS122-V P/N: 03071299
Pressure Drop
6 50 psi
80
4 25 psi
40
2 12 psi
05 psi
0 0 gpm
0 5 10 15 20 25 30
l/min
0 20 40 60 80 100 120
Flow
(25.1)
0.99
Cracking Pressure
05 = 5 psi (0.35 bar)
(57.2)
(89)
2.25
3.5
2.0 Thick
0.34
(8.6)
(50.8)
1
0.2 2.56
(5) (65)
3.0
(75)
3/8” HEX
0.08
(2)
0.51
(13)
1.81
(46)
ø0.88 (ø 22.23)
1 1-16-12 UN-2A
Standard Line Bodies*
ø1.25 Pressure
Code Part No Material Weight
(ø31.8) Rating
Aluminum, 3500 psi 1.20 lb
FH122-AS12 03053845
anodized (245 bar) (0.55 kg)
Steel, 6000 psi 3.56 lb
FH122-SS12 03053772
Zinc plated (420 bar) (1.62 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
2 1 The RV16A allows flow from port 1 to port 2, while normally blocking flow in
the opposite direction. The valve remains closed by bias spring until sufficient
pressure is applied at port 1 at which time the poppet lifts off the seat and allows
flow from port 1 to port 2.
Features
• Hardened poppet to ensure extended service life and low leakage
• Multiple bias spring options for back pressure application flexibility
• Fast closing and seating
• Low pressure drop
• Fully guided check
• All external surfaces zinc-plated
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Nominal Flow 44 gpm (165 l/min)
Internal Leakage <2 drops/min. at 6000 psi
(0.10 cc/min at 420 bar)
Standard Cracking Pressures 5 psi (0.35 bar)
15 psi (1.00 bar)
30 psi (2.00 bar)
70 psi (5.00 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
2 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
1 Installation No orientation restrictions
Cavity FC16-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580250
Finisher: 02580251
Cartridge Weight 0.76 Lbs. (0.35 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Performance Buna N or Viton® o-rings.
Measured at 158 SUS (34 cSt) PTFE back-up rings.
bar psi TOil = 115˚F (46° C)
8 Seal Kits Buna-N FS162-N P/N: 03052427
Viton® FS162-V P/N: 03051758
70 psi
90
6
Pressure Drop
60
4
30 psi
2 30 15 psi
05 psi
0 0 gpm
0 10 20 30 40
0 40 80 120 160 l/min
Flow
(25.1)
0.99
Cracking Pressure
05 = 5 psi (0.35 bar)
15 = 15 psi (1.00 bar)
(57.2)
3.82
(97)
2.25
2.0 Thick
0.34
(8.6)
(50.8)
1
0.2 2.56
(5) (65)
3.0
(75)
1/2” Hex
0.08
(2)
0.63
(16)
(46.5)
1.83
ø1.13 (ø28.6)
1 5/16-12 UN-2A
Standard Line Bodies*
ø 1.5 Pressure
Code Part No Material Weight
(ø 38.1) Rating
Aluminum, 3500 psi 1.20 lb
FH162-AS16 03037195
anodized (245 bar) (0.55 kg)
Steel, 6000 psi 3.56 lb
FH162-SS16 03032655
Zinc plated (420 bar) (1.62 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
The RV06B allows flow from port 2 to port 1 once the sufficient pressure
is applied at port 2 to overcome the bias spring pressure of 5 psi (0.34 bar).
It normally blocks flow in the opposite direction.
3 The relief portion of the valve would remain closed until the predetermined
pressure setting is reached at port 2 to lift the spring opposed ball from its seat,
allowing flow from port 2 to port 3. Pressure at port 3 is directly additive to relief
pressure setting.
Features
• Combination of two functions n one cartridge
• Relief setting up to 5000 psi (350 bar)
• Relief setting adjustment screw cannot be backed out of the valve
• Adjustable under full pressure
• Fast closing and seating
• Hardened closing elements to ensure minimal wear and extend service life
• All external surfaces zinc-plated
Specifications
Operating Pressure 5000 psi (350 bar)
Maximum Flow Rate 4 gpm (15 l/min)
Internal Leakage 5 drops/min maximum to
75% of nominal setting.
Relief Pressure Ranges 0 to 3000 psi (0 to 207 bar)
0 to 5000 psi (0 to 350 bar)
200 3000
2000
100
1000
0 0 gpm
0 1 2 3 4
l/min
0 5 10 15
Flow
0.55
(14)
Relief Adjustment Options
(24.1)
0.95
3 Setting
(44.5)
1.75
1.0 Thick
(25.4)
Performance – Check Valve
Measured at 135 SUS (28 cSt)
bar psi TOil = 100°F (38°C)
10.4 150
1 8.6 125
0.25 1.5
(6.4) (38.1) 6.9 100
Pressure Drop
2.0 5.2 75
(50.8)
3.5 50
1.7 25
0 0 gpm
0 1 2 3 4
l/min
0 3.8 7.6 11.4 15.2
Flow
(39.4) Max
1.55 Max
(27.7)
1.09
0.13
(3.3)
3
(32.3)
1.27
1
ø0.44
(ø11.2)
ø0.47 Standard Line Bodies*
(ø11.9) Pressure
9/16-18 UNF-2A Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.36 lbs
ø0.69 FH063-AS4 02600492
anodized (245 bar) (0.16 kg)
(ø17.5)
Steel, 6000 psi 1.1 lbs
FH063-SS4 02600493
Zinc plated (420 bar) (0.50 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
The RV06C allows flow from port 2 to port 1 once the sufficient pressure
is applied at port 2 to overcome the bias spring pressure of 5 psi (0.34 bar).
It normally blocks flow in the opposite direction.
3 The relief portion of the valve would remain closed until the predetermined
pressure setting is reached at port 2 to lift the spring opposed poppet from its
seat, allowing flow from port 2 to port 3. Pressure at port 3 is directly additive to
relief pressure setting.
Features
• Combination of two functions n one cartridge
• Relief setting up to 5000 psi (350 bar)
• Relief setting adjustment screw cannot be backed out of the valve
• Adjustable under full pressure
• Fast closing and seating
• Hardened closing elements to ensure minimal wear and extend service life
• All external surfaces zinc-plated
Specifications
Operating Pressure 5000 psi (350 bar)
Maximum Flow Rate 5 gpm (19 l/min)
Internal Leakage 5 drops/min maximum to
75% of nominal setting.
Relief Pressure Ranges 0 to 1800 psi (0 to 124 bar)
0 to 3000 psi (0 to 207 bar)
500 to 5000 psi (35 to 350 bar)
Reseat Pressure 80% of crack pressure
3
Check Valve Bias Spring 5 psi (0.34 bar)
Cracking Pressure
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
2 Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
1 Installation No orientation restrictions
Cavity FC06-3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02582050
Finisher: 02582051
Cartridge Weight 0.06 lb (27 g)
Performance – Relief
Cartridge Material Steel with hardened work surfaces.
Measured at 135 SUS (28 cSt)
bar psi TOil = 100°F (38°C)
Zinc plated exposed surfaces.
5000 Buna N or Viton® o-rings.
300
Solid thermoplastic polyester back-up rings.
Pressure Drop
150
2000
100
1000
50
0 0 gpm
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
l/min
0 2 4 6 8 10 12 14 16 18
Flow
0.55
(14)
(24.1)
0.95
3
1.75
Setting
blank = Set at 50% maximum pressure for the range
2
(57.2)
2.25
0.28
(7.1)
8 120
4 60
0 0 gpm
0 1 2 3 4 5
l/min
0 3 6 9 12 15 18
Flow
(39.4) Max
1.55 Max
(27.7)
1.09
0.13
(3.3)
3
(32.3)
1.27
1
ø0.44
(ø11.2)
ø0.47 Standard Line Bodies*
(ø11.9)
9/16-18 UNF-2A Pressure
Code Part No Material Weight
Rating
ø0.69 Aluminum, 3500 psi 0.36 lbs
(ø17.5) FH063-AS4 02600492
anodized (245 bar) (0.16 kg)
Steel, 6000 psi 1.1 lbs
FH063-SS4 02600493
Zinc plated (420 bar) (0.50 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
The RVD08A allows flow from V ports to C ports, while normally blocking flow in
the opposite direction. Flow will be allowed from C to V when pressure is applied
at the opposite V port.
The check is spring biased at 30 psi to assure holding in no load conditions. A
V1 V2 sealed pilot piston option with check spring bias of 70 psi is available.
Features
• H
ardened closing element in a check valve to ensure extended service life
and low leakage
• Multiple bias spring options for back pressure application flexibility
• Optional sealed pilot piston
• Check section serviceable as a cartridge
• All external surfaces zinc-plated
• Aluminum and steel inline housing
V1 V2
Specifications
Operating Pressure 6000 psi (420 bar) - Steel body
3500 psi (245 bar) - Aluminum body
Nominal Flow 10 gpm (38 l/min)
Internal Leakage <2 drops/min. at 6000 psi
(0.10 cc/min at 420 bar)
Standard Cracking Pressures 30 psi (2.00 bar)
70 psi (5.00 bar)
Pilot Ratio 4.5 to 1
Fluid Operating Temp. Range* -4° to 248°F (-20° to +120°C)
C1 C2 (Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cartridge Weight 1.33 Lbs. (0.61 kg) Aluminum
3.3 Lbs. (1.5 kg) Steel
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Performance Buna N or Viton® o-rings.
Measured at 158 SUS (34 cSt) PTFE back-up rings.
bar psi Toil = 115°F (46°C)
20 300 Pilot Piston Material Hardened steel
C V pilot open Pilot Piston Service Part Standard Piston Assy: 02610072
250
V C free flow Numbers Sealed Piston Assy (Buna-N): 02610071
15 Sealed Piston Assy (Viton®): 02610070
200
Piston Only: 02600019
Pressure Drop
(31.8)
1.25
Seals
N = Buna-N
V = Viton®
(15.9)
2.5
1.5
C2 C1
2
0.41 (50.8) 4 0.41
(10.5) (101.6) (10.5)
SAE-6 Ports
0.61
(15.6) 3.39
(86.1)
Operation
The RVD10A allows flow from V ports to C ports, while normally blocking flow in
the opposite direction. Flow will be allowed from C to V when pressure is applied
at the opposite V port.
The check is spring biased at 30 psi to assure holding in no load conditions. A
V1 V2 sealed pilot piston option with check spring bias of 70 psi is available.
Features
• H
ardened closing element in a check valve to ensure extended service life
and low leakage
• Multiple bias spring options for back pressure application flexibility
• Optional sealed pilot piston
• Check section serviceable as a cartridge
• All external surfaces zinc-plated
• Aluminum and steel inline housing
V1 V2
Specifications
Operating Pressure 6000 psi (420 bar) - Steel body
3500 psi (245 bar) - Aluminum body
Nominal Flow 21 gpm (80 l/min)
Internal Leakage <2 drops/min. at 6000 psi
(0.10 cc/min at 420 bar)
Standard Bias Spring Pressures 30 psi (2.00 bar)
70 psi (5.00 bar)
Pilot Ratio 4.5 to 1
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
C1 C2 (Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cartridge Weight 1.54 Lbs. (0.7 kg) Aluminum
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
Performance PTFE back-up rings.
Measured at 158 SUS (34 cSt) Pilot Piston Material Hardened Steel
bar psi Toil = 115°F (46°C)
400 Pilot Piston Service Part Standard Piston Assy: 02610066
25
C V pilot open Numbers Sealed Piston Assy (Buna-N): 02610064
V C free flow Sealed Piston Assy (Viton®): 02610065
20 300 Piston Only: 02600003
Seal Kits (for RV10A) Buna-N FS102-N P/N: 03033872
Pressure Drop
15
200
Viton® FS102-V P/N: 03051757
Seal Kits (Pilot Piston) Buna-N P/N: 02610076
10 Viton® P/N: 02610077
100 PTFE wiper ring (for std piston) 02600008
5
0 0 gpm
0 5 10 15 20
20 40 l/min
0 60
Flow
(31.8)
1.25
SS8 = SAE-8 Ports, steel Body
Seals
N = Buna-N
(15.9)
0.63
V = Viton®
NS = Buna-N with Sealed Piston (Requires 70 psi spring)
VS = Viton® with Sealed Piston (Requires 70 psi spring)
ø 0.41
(10.5) Cracking Pressure
(31.8)
1.25
(11.9)
30 = 30 psi (2.00 bar)
0.47
2 Places
70 = 70 psi (5.00 bar)
V2 V1
Pilot Piston Assembly
(39.7)
1.56
Standard Options N, V = P/N: 02610066
Sealed NS Option = P/N: 02610064
Sealed VS Option = P/N: 02610065
C2 C1
2.25
(51.15)
4.5 0.53
(114.3) (13.5)
0.75
(19.1) 3.75
(95.2)
SAE-8 Ports
Operation
The RVS08A allows flow from port V to port C, while normally blocking flow in the
opposite direction. Flow will be allowed from C to V when pressure is applied at
pilot port P.
The check is spring biased at 30 psi to assure holding in no load conditions. A
sealed pilot piston option with check spring bias of 70 psi is available.
P (pilot)
Features
• H
ardened closing element in a check valve to ensure extended service life
V (valve) and low leakage
• Multiple bias spring options for back pressure application flexibility
• Optional sealed pilot piston
• Check section serviceable as a cartridge
• All external surfaces zinc-plated
• Aluminum and steel inline housing
V Specifications
Operating Pressure 6000 psi (420 bar) - Steel body
3500 psi (245 bar) - Aluminum body
Nominal Flow 10 gpm (38 l/min)
Internal Leakage <2 drops/min. at 6000 psi
(0.10 cc/min at 420 bar)
Standard Cracking Pressures 30 psi (2.00 bar)
P 70 psi (5.00 bar)
Pilot Ratio 4.5 to 1
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
C
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cartridge Weight 1.0 Lbs. (0.45 kg) Aluminum
2.6 Lbs. (1.18 kg) Steel
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
Performance PTFE back-up rings.
Measured at 158 SUS (34 cSt) Pilot Piston Material Hardened steel
bar psi Toil = 115°F (46°C)
20 300 Pilot Piston Service Part Standard Piston Assy: 02610069
C V pilot open Numbers Sealed Piston Assy (Buna-N): 02610067
250
V C free flow Sealed Piston Assy (Viton®): 02610068
15 Piston Only: 02600016
200
Pressure Drop
0 0 gpm
0 2 4 6 8 10
l/min
0 10 20 30 38
Flow
(31.8)
1.25
SS6 = SAE-6 Ports, steel Body
(Pilot Port = SAE-4)
Seals
0.53 N = Buna-N
(13.5)
V = Viton®
ø 0.28 NS = Buna-N with Sealed Piston (Requires 70 psi spring)
(7.14) VS = Viton® with Sealed Piston (Requires 70 psi spring)
Cracking Pressure
SAE 4 Port 30 = 30 psi (2.00 bar)
V 70 = 70 psi (5.00 bar)
Operation
The RVS10A allows flow from port V to port C, while normally blocking flow in the
opposite direction. Flow will be allowed from C to V when pressure is applied at
pilot port P.
The check is spring biased at 30 psi to assure holding in no load conditions. A
sealed pilot piston option with check spring bias of 70 psi is available.
P (pilot)
Features
• H
ardened closing element in a check valve to ensure extended service life
V (valve) and low leakage
• Multiple bias spring options for back pressure application flexibility
• Optional sealed pilot piston
• Check section serviceable as a cartridge
• All external surfaces zinc-plated
• Aluminum and steel inline housing
Specifications
V Operating Pressure 6000 psi (420 bar) - Steel body
3500 psi (245 bar) - Aluminum body
Nominal Flow 21 gpm (80 l/min)
Internal Leakage <2 drops/min. at 6000 psi
(0.10 cc/min at 420 bar)
Standard Cracking Pressures 30 psi (2.00 bar)
P 70 psi (5.00 bar)
Pilot Ratio 4.5 to 1
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
C Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cartridge Weight 1.17 Lbs. (0.53 kg) Aluminum
2.88 Lbs. (1.31 kg) Steel
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
Performance PTFE back-up rings.
Measured at 158 SUS (34 cSt) Pilot Piston Material Hardened steel
bar psi Toil = 115°F (46°C)
400 Pilot Piston Service Part Standard Piston Assy: 02610075
25
C V pilot open Numbers Sealed Piston Assy (Buna-N): 02610073
V C free flow Sealed Piston Assy (Viton®): 02610074
20 300 Piston Only: 02600000
Seal Kits (for RV08A) Buna-N FS082-N P/N: 03033872
Pressure Drop
15
200
Viton® FS082-V P/N: 03051757
Seal Kits (Pilot Piston) Buna-N P/N: 02610076
10 Viton® P/N: 02610077
100 PTFE wiper ring (for std piston) 02600028
5
0 0 gpm
0 5 10 15 20
20 40 l/min
0 60
Flow
(15.9)
0.63
AS8 = SAE-8 Ports, aluminum Body
SS8 = SAE-8 Ports, steel Body
(Pilot Port = SAE-6)
0.53 Seals
ø 0.41” (13.5) N = Buna-N
(10.5) V = Viton®
2 Places NS = Buna-N with Sealed Piston (Requires 70 psi spring)
VS = Viton® with Sealed Piston (Requires 70 psi spring)
3.62
(92) Cracking Pressure
(11.9)
0.47
SAE 6 Port 2.5 30 = 30 psi (2.00 bar)
(63.5) 70 = 70 psi (5.00 bar)
V
Pilot Piston Assembly
(63.5)
P
2.5
(39.7)
1.56
Standard Options N, V = P/N: 02610075
Sealed NS Option = P/N: 02610073
Sealed VS Option = P/N: 02610074
C
0.63
(15.9)
1.25
(31.8) 0.75
(19.1)
SAE 8 Port
Operation
2 The RS08 allows free flow from port 2 (inlet) to port 1 (load). Flow from port 1 to
port 2 is blocked until either the pressure setting has been reached or sufficient
pilot pressure has been applied to port 3 (pilot). The RS08 has optional 3:1 and
4:1 pilot ratios. It will open when pilot pressure = 1/3 (or 1/4) of the difference
between the set pressure and the load pressure.
Features
• Excellent stability through entire flow range
• Adjustable across specified pressure range
• Positive stop prevents spring from over adjustment (options V, H)
• Stroke limiting device for enhanced safety
• Internal seals to minimize leakage
• Same cavity as the RP08A-01 P.O. Check valve.
• Hardened poppet and seat to ensure extended service life and low leakage
• All external surfaces zinc-plated
• Industry common cavity
3 Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 10 gpm (38 l/min)
2 Internal Leakage 5 drops/min. (0.25 cc/min) max.
to 80% of nominal settings
Pilot Ratios 3:1, 4:1
1 Check Valve Cracking Pressure 14 psi (1.0 bar)
Performance Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
bar psi 3:1 Pilot Ratio (Consult factory for usage at temp. outside range.)
7000
Fluid Compatibility Mineral-based or synthetics with
400 6000 lubricating properties
5000 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Pressure
300
4000 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
200 3000
Installation No orientation restrictions
2000
100 Cavity FC08-3 (see Line Bodies & Cavities section)
1000 Cavity Tools Rougher: 02580086
0 0 Finisher: 02580087
0 1 2 3 4 5 6 7 8 9 10 11 gpm
Cartridge Weight 0.58 Lbs. (.266 kg)
0 5 10 15 20 25 30 35 40 l/min
Cartridge Material Steel with hardened work surfaces.
Flow Zinc-plated exposed surfaces.
bar psi Anodized aluminum knobs. (option H)
4:1 Pilot Ratio
7000 Buna N or Viton® o-rings, and
PTFE back-up rings.
400 6000
Seal Kits Buna-N FS083-N P/N: 03054795
5000 Viton® FS083-V P/N: 02591059
Pressure
300
4000
200 3000
2000
100
1000
0 0
0 1 2 3 4 5 6 7 8 9 10 11 gpm
0 5 10 15 20 25 30 35 40 l/min
Flow
the pressure
the pressure
setting. setting.
3.33 Max.
(84.7 Max.)
Max.
screw clockwise
screw clockwise increasesincreases
the pressure
the pressure setting. setting. V = Viton®
(84.7
Max.)
(15.2)
3.33 Max.
3.33 Max.
0.60 0.60
Pilot Ratio
(84.7 (84.7
(84.7 3.33
(15.2)(15.2)
(15.2)
0.60 0.60
(15.2)0.60
3 = 3:1
4 = 4:1
3 Adjustment Range
(29.7)
1.17 1.17
3 3
(29.7)
(7.1) (29.7)
(29.7)1.17
2
(53.8)
2.12 2.12
Adjustment Options
2 2 3 3
(53.8)
(53.8)
(53.8)(29.7)
2.622.12
2.12
1.17
2 2
(66.5)
(7.1) 0.28
(7.1) (7.1)
(7.1)
(53.8)
2.62 2.12
(66.5)
(66.5)
2.622.62
(66.5)2.62
1000
2.573.37 3.37
Max.)
3.37 Max.
(85.7)
(85.7)
3.37
(85.7)3.37
Max.)
(85.7 Max.)
Max.
60
(85.7)
3.37
Max.)
800
Pressure Drop
(65.2) (65.2)
(85.7
Max.)
50
(65.2)
(41.3)0.06 0.06(65.2)
3.37 Max.
2.57
2.57
3.37
(85.7
(85.7 3.37
(65.2)
600
3.37
(85.7
40
1.6
0.06
1.6 0.06
30
1.6
1.6
400
1.36 1.36 0.06
1.6
20
200
(41.3) (41.3)
10 2 1 2 1 1 2
1 2
(41.3)
1.36
1.36
(41.3)
1.36
0 0 gpm
0 1 2 3 4 5 6 7 8 9 10 11
ø0.56 (14.27) 0 5 10 15 20 25 30 35 40
l/min
ø0.56 (14.27)
ø0.56(15.88)
(14.27) Flow
ø0.56ø0.63
(14.27)
ø0.63ø(15.88)
ø0.63
0.95 (15.88)
(24)
ø0.63
ø 0.95(15.88)
ø0.56 (14.27)
ø(24)
0.95 (24)
3/4-
ø 0.95 (24)16UNF- 2A
3/4-ø0.63
3/4-(15.88)
16UNF- 16UNF-
2A 2A
3/4- ø
16UNF- 2A
0.95 (24)
3/4- 16UNF- 2A‘F’ - Tamper Proof Cap
‘K’ - Protective Cap
9/16” HEX
9/16” HEX
9/16” HEX
9/16” HEX
9/16” HEX
(93.8)
3.69 3.69
(87.3)
3.44 3.44
(93.8)
3.69
(93.8)3.69
(87.3)
(87.3)
(93.8)
3.69
3.44
(87.3)3.44
(87.3)
3.44
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.58 lb
FH083-AS6 03011424
anodized (245 bar) (0.26 kg)
Steel, 6000 psi 1.70 lb
FH083-SS6 00560920
Zinc plated (420 bar) (0.77 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Features
• Operating pressure up to 5000 psi (350 bar)
• Various spring ranges
• Quiet, modulated response
• All external surfaces zinc-plated
• Hardened spool and sleeve to ensure minimal wear and extend service life
• Industry common cavity
3 Operation
Pilot flow through the spool orifice, from port 1 to port 3 creates a pressure drop
and allows flow from port 1 to port 2 when the pressure drop exceeds the spring
bias pressure. The valve can be remotely controlled at port 3 such as relief or
2 solenoid valve.
Features
• Operating pressure up to 5000 psi (350 bar)
• Various bias spring settings up to 300 psi (20.7 bar)
• Quiet, modulated response
• All external surfaces zinc-plated
• Hardened spool and sleeve to ensure minimal wear and extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 40 gpm (151 l/min)
Internal Leakage 30.5 cu in/min at 5000 psi (0.5 l/min at 350 bar)
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
3 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC10-S3 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02581794
Finisher: 02581795
Cartridge Weight 0.35 lb (0.158 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
1 Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
Seal Kits Buna-N FS10S3-N P/N: 02610278
Viton® FS10S3-V P/N: 02610279
Vent Flow Rate Approximately 0.15 gpm ( 0.57 lpm)
Performance
1 to 2; Port 3 vented Measured at 135 SUS (28 cSt) Application
bar psi TOil = 100°F (38°C)
35
1
500
30
400
300
25
Pressure Drop
225
20 300
15 150
200
no spring
10
100
75 3
5
0 0 gpm
0 5 10 15 20 25 30 35 40 45
l/min 2 DW10SA Pilot Relief Valve
0 35 70 100 135 170
Flow Pressure Relief / Sequence Application
(14.7)
0.58
Seals
N = Buna-N
V = Viton®
Bias Spring
75 = 75 psi
150 = 150 psi
(31.8)
1.25
(91.4)
225 = 225 psi
3.6
3 300 = 300 psi
(57.2)
2.25
2
(69.9)
2.75
0.28
(7.1)
1
0.25 2.0
(6.4) (50.8) 1.25 Thick
2.5 (31.8)
(63.5)
(22.1)
0.87
0.28
(7.1)
3
1.85
(47)
1
ø0.69
(ø17.5)
ø0.75
(ø19.1)
7/8-14 UNF-2A
ø1.063
(ø27) Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.59 lbs
FH10S3-AS8 02582076
anodized (245 bar) (0.27 kg)
Steel, 6000 psi 1.67 lbs
FH10S3-SS8 02582077
zinc plated (420 bar) (0.76 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
3 Operation
Pilot flow through the spool orifice, from port 1 to port 3 creates a pressure drop
and allows flow from port 1 to port 2 when the pressure drop exceeds the spring
bias pressure. The valve can be remotely controlled at port 3 such as relief or
2 solenoid valve.
Features
• Operating pressure up to 5000 psi (350 bar)
• Various bias spring settings up to 300 psi (20.7 bar)
• Quiet, modulated response
• All external surfaces zinc-plated
• Hardened spool and sleeve to ensure minimal wear and extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 75 gpm (284 l/min) at 100 psi (7 bar) ∆P
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
3 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC16-S3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02581797
Finisher: 02581798
2
Cartridge Weight 1.0 lb (0.454 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
1 Seal Kits Buna-N FS16S3-N P/N: 02610198
Viton® FS16S3-V P/N: 02610199
Vent Flow Rate Approximately 0.15 gpm (0.57 lpm)
Performance Application
1 to 2; Port 3 vented Measured at 135 SUS (28 cSt)
bar psi TOil = 100°F (38°C) 1
400
300
25
350
20 300
225
Pressure Drop
250
15
200
150
10 150
no spring
3
100
75
5
50
0 0
0 10 20 30 40 50 60 70 80
gpm 2 DW16SA Pilot Relief Valve
0 60 120 180 240 300
l/min
Pressure Relief / Sequence Application
Flow
Seals
N = Buna-N
V = Viton®
Bias Spring
75 = 75 psi
(38.4)
1.51
150 = 150 psi
3 225 = 225 psi
(116.1)
300 = 300 psi
4.57
(73.1)
2.88
(88.9)
3.50
0.34
(8.6)
0.23
1 3.04
2.0 Thick
(5.8) (77.2)
(50.8)
3.50
(88.9)
(21.6)
0.85
0.27
(6.9)
3
(55.9)
2.20
1
ø1.0
(ø25.4)
ø1.13
(ø28.7)
1 5/16-12 UN-2A
1 Features
• Operating pressure up to 5000 psi (350 bar)
• Various bias spring settings up to 300 psi (20.7 bar)
• Quiet, modulated response
• All external surfaces zinc-plated
• Hardened spool and sleeve to ensure minimal wear and extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8 gpm (30 l/min) at 100 psi (7 bar) ∆P
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
3 Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC10-S3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02581794
Finisher: 02581795
Cartridge Weight 0.35 lb (0.158 kg)
2
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
Seal Kits Buna-N FS10S3-N P/N: 02610278
Viton® FS10S3-V P/N: 02610279
1 Vent Flow Rate Approximately 0.15 gpm (0.57 lpm)
Application 2
Performance
Measured at 135 SUS (28 cSt)
bar psi TOil = 100°F (38°C) 3
600
40
35 500
30 Port 2 to 1
Pressure Drop
400
25
300
20
1 DW10SC Pilot Relief Valve
15
200
10
Pressure Reducing Application
100
5
0 0 gpm
0 5 10 15 20
l/min
0 10 20 30 40 50 60 70
Flow
(14.7)
0.58
Seals
N = Buna-N
V = Viton®
Bias Spring
100 = 100 psi
(31.8)
(91.4)
3.60
300 = 300 psi
(57.2)
2.25
(69.9)
2
2.75
Compensation
2 to 1: orifice downstream Measured at 135 SUS (28 cSt)
l/min gpm TOil = 100°F (38°C)
70 18
16
60 300 psi
14
0.28
(7.1)
50
12
1 40 10
200 psi
Flow
0.25 2.0
(6.4) (50.8) 1.25 Thick 30 8
(31.8) 6
2.5 20 100 psi
(63.5) 4
10
2
0 0
0 1000 2000 3000 4000 5000 psi
0.28
(7.1)
3
1.85
(47)
1
ø0.69
(ø17.9)
ø0.75
(ø19.1)
7/8-14 UNF-2A
Standard Line Bodies*
ø1.063 Pressure
Code Part No Material Weight
(ø27) Rating
Aluminum, 3500 psi 0.59 lbs
FH10S3-AS8 02582076
anodized (245 bar) (0.27 kg)
Steel, 6000 psi 1.67 lbs
FH10S3-SS8 02582077
zinc plated (420 bar) (0.76 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
1 Features
• Operating pressure up to 5000 psi (350 bar)
• Various bias spring settings up to 300 psi (20.7 bar)
• Quiet, modulated response
• All external surfaces zinc-plated
• Hardened spool and sleeve to ensure minimal wear and extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 19 gpm (72 l/min) at 100 psi (7 bar) ∆P
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
3 Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC16-S3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02581797
Finisher: 02581798
Cartridge Weight 1.0 lb (0.454 kg)
2
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
Seal Kits Buna-N FS16S3-N P/N: 02610198
Viton® FS16S3-V P/N: 02610199
1
Vent Flow Rate Approximately 0.15 gpm (0.57 lpm)
Application 2
Performance
Measured at 135 SUS (28 cSt)
bar psi TOil = 100°F (38°C) 3
700
45
40 600
35 500
Pressure Drop
30
400
25
0
0 5 10 15 20 25 30 35 40 45 gpm
Seals
N = Buna-N
V = Viton®
Bias Spring
100 = 100 psi
(38.4)
1.51
150 = 150 psi
200 = 200 psi
3
(116.1)
300 = 300 psi
4.57
(73.1)
2.88
(88.9)
3.50”
0.34
(8.6)
0.23”
1 3.04
2.0 Thick
(5.0) (77.2)
(50.8)
3.50
(88.9)
(21.6)
0.85
0.27
(6.9)
3
(55.9)
2.20
1
ø1.0
(ø25.4)
ø1.13
(ø28.7)
1 5/16-12 UN-2A
ø1.56
(ø39.6) Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 2.34 lbs
FH16S3-AS16 02582078
anodized (245 bar) (1.06 kg)
Steel, 6000 psi 6.80 lbs
FH16S3-SS16 02582079
zinc plated (420 bar) (3.09 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
The spool begins to shift when the pressure at port 1 exceeds the combined
3 pressure at port 3 plus the bias spring pressure. It is possible to create a
pressure compensated flow control package by connecting port 1 upstream
and port 3 downstream of a control orifice.
1
Features
• Operating pressure up to 5000 psi (350 bar)
• Various bias spring settings up to 300 psi (20.7 bar)
• Quiet, modulated response
• All external surfaces zinc-plated
• Hardened spool and sleeve to ensure minimal wear and extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8 gpm (30 l/min) at 100 psi (7 bar) ∆P
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
3 Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC10-S3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02581794
Finisher: 02581795
2 Cartridge Weight 0.35 lb (0.158 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
Seal Kits Buna-N FS10S3-N P/N: 02610278
Viton® FS10S3-V P/N: 02610279
1
Application
Performance
Measured at 135 SUS (28 cSt) 3
bar psi TOil = 100°F (38°C)
600
40
INLET 2 1
35 500
30 Port 2 to 1 Pressure
Pressure Drop
400 Compensated
25 External fixed or
Flow
20 300 Variable orifice
15
200
10 Pressure Compensated Flow Regulator
100
5
0 0 gpm
0 5 10 15 20
l/min
0 10 20 30 40 50 60 70
Flow
(14.7)
0.58
Seals
N = Buna-N
V = Viton®
Bias Spring
100 = 100 psi
(31.8)
1.25
(91.4)
3.60
300 = 300 psi
3
(57.2)
2.25
(69.9)
2.75
2
Compensation
2 to 1: orifice downstream Measured at 135 SUS (28 cSt)
l/min gpm TOil = 100°F (38°C)
70 18
16
60 300 psi
14
0.28
(7.1)
50
12
1 40 200 psi
0.25 2.0 10
Flow
2.50 (31.8) 6
20 100 psi
(63.5) 4
10
2
0 0
0 1000 2000 3000 4000 5000 psi
0.28
(7.1)
3
1.85
(47)
1
ø0.69
(ø17.5)
ø0.75
(ø19.1)
7/8-14 UNF-2A
Standard Line Bodies*
ø1.063 Pressure
(ø27) Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.59 lbs
FH10S3-AS8 02582076
anodized (245 bar) (0.27 kg)
Steel, 6000 psi 1.67 lbs
FH10S3-SS8 02582077
zinc plated (420 bar) (0.76 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
3 Operation
The spool begins to shift when the pressure at port 1 exceeds the combined
pressure at port 3 plus the bias spring pressure. It is possible to create a
1 pressure compensated flow control package by connecting port 1 upstream and
port 3 downstream of a control orifice.
Features
• Operating pressure up to 5000 psi (350 bar)
• Various bias spring settings up to 300 psi (20.7 bar)
• Quiet, modulated response
• All external surfaces zinc-plated
• Hardened spool and sleeve to ensure minimal wear and extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 19 gpm (72 l/min) at 100 psi (7 bar) ∆P
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
l/min gpm
3 Viscosity
Filtration
50 to 2000 SUS (7.4 to 420 cSt)
21/19/16 or cleaner per (ISO 4406)
110 30
70
20
200 psi
2 Cavity Tools Rougher:
Finisher:
02581797
02581798
Flow
60 150 psi
15 Cartridge Weight 1.0 lb (0.454 kg)
50
20 5
1 Zinc plated exposed surfaces.
Buna N or Viton® o-rings
Solid thermoplastic polyester back-up rings
10
35 500
Pressure
Compensated
30 External fixed or
400 Flow
Pressure
25 Variable orifice
20 300
15
200
Pressure Compensated Flow Regulator
10
100
5
0 0 gpm
0 5 15 25 35 45
l/min
0 35 70 100 135 170
Flow
Bias Spring
100 = 100 psi
(38.4)
1.51
150 = 150 psi
200 = 200 psi
3
(116.1)
300 = 300 psi
4.57
(73.1)
2.88
2 Compensation
l/min gpm
110 30
(88.9)
3.50
100 300 psi
90 25
80 200 psi
20
70
0.34
(8.6)
Flow
60 150 psi
15
50
0.23
1 3.04
40
10
100 psi
2.0 Thick 30
(5.8) (77.2)
(50.8) 20 5
3.50 10
(88.9) 0 0
0 1000 2000 3000 4000 5000
psi
bar
0 50 100 150 200 250 300 350
Pressure
45
600
40
35 500
30
400
Pressure
25
0.27
(6.9)
20 300
15
3
200
10
(55.9)
2.20
100
5
0 0 gpm
0 5 15 25 35 45
l/min
0 35 70 100 135 170
2 Flow
1
ø1.00
(ø25.4)
ø1.13
(ø28.7) Standard Line Bodies*
1 5/16-12 UN-2A
Pressure
Code Part No Material Weight
Rating
ø1.56 Aluminum, 3500 psi 2.34 lb
FH16S3-AS16 02582078
(ø39.6) anodized (245 bar) (1.06 kg)
Steel, 6000 psi 6.80 lbs
FH16S3-SS16 02582079
zinc plated (420 bar) (3.09 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
3 The spool begins to shift allowing flow from port 1 to port 2 only when pressure
at port 1 exceeds the combined pressure at port 3 plus the bias spring pressure
setting. With no pressure at port 3, flow will be allowed from port 1 to port 2 once
the bias spring force is overcome with pressure at port 1.
It is also possible to create pressure compensation by connecting port 1
2 upstream and port 3 downstream of a control orifice.
Features
• Operating pressure up to 5000 psi (350 bar)
• Various bias spring settings up to 300 psi (20.7 bar)
• Quiet, modulated response
• All external surfaces zinc-plated
• Hardened spool and sleeve to ensure minimal wear and extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 40 gpm (151 l/min)
Internal Leakage 5 cu in/min at 3000 psi (82cc/min at 207 bar)
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
3 Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC10-S3 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02581794
Finisher: 02581795
Cartridge Weight 0.35 lb (0.158 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
1 Solid thermoplastic polyester back-up rings.
Seal Kits Buna-N FS10S3-N P/N: 02610278
Viton® FS10S3-V P/N: 02610279
Performance Application
1 to 2; Port 3 vented Measured at 135 SUS (28 cSt)
bar psi TOil = 100°F (38°C) INLET
35 500
Pressure
30
400 Compensated
300 External fixed or
25 1 Controlled Flow
Variable orifice
Pressure Drop
225
20 300
15 150
200
no spring
10
75 3
100
5 2
0 0
0 5 10 15 20 25 30 35 40 45
gpm By-Pass Flow
l/min
0 35 70 100 135 170
Pressure Compensated Priority Flow Regulator
Flow
(14.7)
0.58
(Pilot Port = SAE-6)
Seals
N = Buna-N
V = Viton®
Bias Spring
(31.8)
75
1.25
= 75 psi
(91.4)
3.60
150 = 150 psi
3 225 = 225 psi
300 = 300 psi
(57.2)
2.25
(69.9)
2.75
2
0.28
(7.1)
1
0.25 2.0
(6.4) (50.8) 1.25 Thick
(31.8)
2.50
(63.5)
(22.1)
0.87
0.28
(7.1)
3
1.85
(47)
1
ø0.69
(ø17.5)
ø0.75
(ø19.1)
7/8-14 UNF-2A
ø1.063
(ø27)
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.59 lbs
FH10S3-AS8 02582076
anodized (245 bar) (0.27 kg)
Steel, 6000 psi 1.67 lbs
FH10S3-SS8 02582077
zinc plated (420 bar) (0.76 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
3 The spool begins to shift allowing flow from port 1 to port 2 only when pressure
at port 1 exceeds the combined pressure at port 3 plus the bias spring pressure
setting. With no pressure at port 3, flow will be allowed from port 1 to port 2 once
the bias spring force is overcome with pressure at port 1.
It is also possible to create pressure compensation by connecting port 1
2 upstream and port 3 downstream of a control orifice.
Features
• Operating pressure up to 5000 psi (350 bar)
• Various bias spring settings up to 300 psi (20.7 bar)
• Quiet, modulated response
• All external surfaces zinc-plated
• Hardened spool and sleeve to ensure minimal wear and extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 75 gpm (284 l/min)
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Fluid Compatibility Mineral-Based or Synthetics with
3 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC16-S3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02581797
Finisher: 02581798
2 Cartridge Weight 1.0 lb (0.454 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings
Solid thermoplastic polyester back-up rings
1 Seal Kits Buna-N FS16S3-N P/N: 02610198
Viton® FS16S3-V P/N: 02610199
Performance Application
Measured at 135 SUS (28 cSt) INLET
1 to 2; Port 3 vented
bar psi TOil = 100°F (38°C)
28
200
400 Pressure
300
Compensated
24 350 External fixed or
1 Controlled Flow
21 300 Variable orifice
150 225
Pressure Drop
17 250
14
100 200
150
10 150 3
7 100
2
50 75
no spring
3 50 By-Pass Flow
00 0 gpm
0 10 20 30 40 50 60 70 80
Pressure Compensated Priority Flow Regulator
l/min
0
0 1 50 2 3
100 4 150 5 6
200 7 250 8 9
300
Flow
Bias Spring
75 = 75 psi
(38.4)
1.51
150 = 150 psi
3
(116.1)
200 = 200 psi
4.57
300 = 300 psi
(73.1)
2.88
(88.9)
3.50
0.34
(8.6)
0.23 1 3.04
2.0 Thick
(5.8) (77.2)
(50.8)
3.50
(88.9)
(21.6)
0.85
0.27
(6.9)
3
(55.9)
2.20
1
ø1.00
(ø25.4)
ø1.13
(ø28.7)
1 5/16-12 UN-2A Standard Line Bodies*
ø1.56 Pressure
Code Part No Material Weight
(ø39.6) Rating
Aluminum, 3500 psi 2.34 lb
FH16S3-AS16 02582078
anodized (245 bar) (1.06 kg)
Steel, 6000 psi 6.80 lbs
FH16S3-SS16 02582079
zinc plated (420 bar) (3.09 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Features
• Leaktight design
• Low pressure drop
• Wet armature construction
• Standard Water/Weather resistant coils rated up to IP69K
• Wide voltage range
• Coils are rated for continuous duty operation
• Wide variety of voltages and molded-in connectors
• Cartridges are voltage interchangeable
• Manual overrides available on all models
• Hardened poppet to ensure minimal wear and extend service life
• One piece body design minimizes the effects of eccentricity
• All exposed cartridge surfaces are zinc-plated to resist corrosion
• Industry common cavity-compact size
Features
• Low pressure drop
• Wet armature construction
• Standard Water/Weather resistant coils rated up to IP69K
• Wide voltage range
• Coils are rated for continuous duty operation
• Wide variety of voltages and molded-in connectors
• Cartridges are voltage interchangeable
• Manual overrides available on all models
• Detented manual overrides available on selected models
• Hardened and ground spool to ensure minimal wear and extend service life
• One piece body minimizes the effects of eccentricity
• All exposed cartridge surfaces are resistant corrosion
• Industry common cavity-compact size
Operation
When de-energized the WS06Y allows flow from port 2 to port 1, while flow from
port 1 to port 2 is severely restricted. When energized the valve’s poppet closes
1 on its seat, blocking flow from port 2 to port 1. Flow from port 1 to port 2 is
allowed when hydraulic pressure generated overcomes solenoid force.
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 3.5 gpm (13.3 l/min)
Internal Leakage Leaktight, less than 5 drops/min.
at 5000 psi (350 bar)
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Ambient Temperature Range -20° to 140°F (-29° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw at 68°F (20°C) 984 mA at 12VDC; 492 mA at 24VDC
Minimum Pull-in Current 70% of nominal amperage
to Operate Valve
Typical Response Time Energized: 50ms
(Varies with Pressure and Flow) De-Energized: 35ms
Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties.
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC06-2 (see Line Bodies and Cavities section)
Cavity Tools Rougher: 02582046
Finisher: 02582047
2 Cartridge Weight 2.7 oz (75 grams)
Coil Weight 3.1 oz (88 grams)
Cartridge Material Steel with hardened work surfaces.
1 Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
Coil Material Class N, 200°C high temperature magnet wire,
steel shell, polyester encapsulation.
Performance Seal Kits Buna-N FS062-N P/N: 02610184
Measured at 135 SUS (28 cSt) Viton® FS062-V P/N: 02610185
bar psi
Toil = 100° F (38° C)
20 300
250
15
2 1 De-energized
Pressure Drop
200
10 150
100
5
50
gpm
0 0
0 1 2 3 4 5
l/min
0 5 10 15
Flow
C = Cartridge only
AS4 = SAE-4 Ports, aluminum body
SS4 = SAE-4 Ports, steel body
Seals
11/16” HEX N = Buna-N
Torque 12-15 ft-lbs V = Viton®
(Torque 16-20 Nm) Coil Voltage
0 = No coil, cartridge only
0.55
DC 12 = 12 VDC
(14)
24 = 24 VDC
AC 115 = 105 VDC (only available with connector DG)
2
(50.8)
(38.1)
1.50
(All model 32-1329 coils are DC. AC models require an external diode bridge
mounted outside the coil)**
Coil Connector
DG = EN 175301-803-B (IP65 Rated)**
DC DL = Leadwires (2) - 18” long (46 cm) AWG18, TYPE UL 1815
0.28
(7.1)
(IP69K Rated)*
DN = Deutsch DT04-2P integral molded (IP69K Rated)*
1.0 Thick
0.25 1.5 1 (25.4)
Use mating plug EN 175301-803-B without diode bridge for
DC voltages P/N 02600570
(6.4) (38.1)
2.0 Use mating plug EN 175301-803-B w/diode bridge for
(50.8) AC voltages P/N 02600582
Coil Model 32-1329
For other coil connector types consult factory
ø1.13 ** Mating Plugs sold separately
(ø28.7) *Coils with internal transient suppression diode are available, consult factory.
1.33
(33.8)
(58.4) Max
2.30 Max
0.36
(9.1)
0.04
(1)
(21.3)
0.84
1
ø0.47
(ø11.9)
Standard Line Bodies*
Pressure
9/16-18 UNF-2A Code Part No Material Weight
Rating
ø0.69 Aluminum, 3500 psi 0.33 lbs
FH062-AS4 02600491
(ø17.9) anodized (245 bar) (0.15 kg)
Steel, 6000 psi 0.97 lbs
FH062-SS4 02600490
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS08Y allows flow from port 2 to port 1, while flow
from port 1 to port 2 is severely restricted. If this flow path is required see
1 model WS08YR. When energized the valve’s poppet closes on its seat, blocking
flow from port 2 to port 1. Flow from port 1 to port 2 is allowed when hydraulic
pressure generated force (130 to 290 psi (9 to 20 bar)) overcomes solenoid force.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 10 gpm (38 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68°F (20°C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized: 50ms
De- 35ms
2 Energized:
Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties.
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
1 Filtration 21/19/16 or cleaner per (ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies and Cavities section)
Cavity Tools Rougher: 02580090
Finisher: 02580091
Performance Cartridge Weight 0.31 Lbs. (0.14 kg)
Measured at 158 SUS (34 cSt)
bar psi Coil Weight 0.42 Lbs. (0.19 kg
Toil = 115°F (46°C)
125 Cartridge Material Steel with hardened work surfaces.
7.5 2
Zinc plated exposed surfaces.
1
Pressure Drop
0 0 gpm
0 2 4 6 8 10
0 10 20 30 38 l/min
Flow
(69.5 Max.)
2.8 Max.
Coil Voltage
7/8” HEX 0 = No coil, cartridge only
Torque 18.5-22 ft-lbs DC 12 = 12 VDC
(Torque 25-30 Nm) 24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
AC 24 = 24 VAC
2
(15.5)
0.61
Coil Connector
(38)
0.28
(7.1)
DC DG = EN 175301-803-A
(50)
2.0
ø1.43
(ø36.3) 0.94
(23.8)
(70.5 Max.)
2.78 Max.
0.37
(9.5)
0.08
(2)
2
(28)
1.1
Operation
When de-energized the WS10Y allows flow from port 2 to port 1, while flow from
port 1 to port 2 is severely restricted. If this flow path is required see model
1 WS10YR. When energized the valve’s poppet closes on its seat, blocking flow
from port 2 to port 1. Flow from port 1 to port 2 is allowed when hydraulic
pressure generated force (36 to 145 psi (2.5 to 10 bar)) overcomes solenoid force.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 20 gpm (75 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 55 ms
De-energized 35 ms
Fluid Compatibility Mineral-based or synthetics with
2 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
1 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580274
Finisher: 02580247
Cartridge Weight 0.40 Lbs. (0.182 kg)
Performance
Coil Weight 0.42 Lbs. (0.190 kg)
Measured at 158 SUS (34 cSt)
bar psi T Oil = 115oF (46oC) Cartridge Material Steel with hardened work surfaces.
12 Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
10 150 2 1 De-energized
PTFE back-up rings.
Pressure Drop
0 0 gpm
0 5 10 15 20
l/min
0 10 20 30 40 50 60 70 80
Flow
Seals
N = Buna-N
(72 Max.)
V = Viton®
1” HEX Coil Voltage
Torque 28-33 ft-lbs 0 = No coil, cartridge only
(Torque 38-45 Nm) DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
(18.8) 110 = 110 VDC (only available with connector DG)
2 AC 24 = 24 VAC
0.74
Coil Connector
0.28
(7.1)
2.13
(55)
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
DL = Leadwires (2) - 18” long (46 cm)*
DW = WeatherPak™ on leadwires - 9.5” long (24 cm)*
1.25 Thick DN = Deutsch™ DT04-2P, molded, axial (IP69K Rated)*
(32) DT = Amp Junior Timer™, molded, radial mount*
AC AG = EN 175301-803-A
0.20
1 1.77 Coil Model 40-1836
(5) (45) For other coil connector types consult factory
2.13 *Coils with internal diode are available, consult factory.
(55)
ø1.43
(ø36.3)
0.95
(24)
2.87 Max.
(73 Max.)
0.47
(12)
0.08
(2)
1.30
(33)
2
Standard Line Bodies*
Pressure
Code Part No Material Weight
ø0.63 1 Rating
(ø15.88) Aluminum, 3500 psi 0.40 lbs
7/8-14 UNF-2A FH102-AS8 03037778
anodized (245 bar) (0.18 kg)
Steel, 6000 psi 1.16 lbs
FH102-SS8 03037612
Zinc plated (420 bar) (0.53 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS12Y allows flow from port 2 to port 1, while flow from
port 1 to port 2 is severely restricted. If this flow path is required see model
1 WS12YR. When energized the valve’s poppet closes on its seat, blocking flow
from port 2 to port 1. Flow from port 1 to port 2 is allowed when hydraulic
pressure generated force (22 to 94 psi (1.5 to 6.5 bar)) overcomes solenoid force.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 29 gpm (110 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 90 ms
De-energized 25 ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
2 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
1 Cavity FC12-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580667
Finisher: 02580668
Performance
Measured at 158 SUS (34 cSt) Cartridge Weight 0.60 Lbs. (0.27 kg)
bar psi Toil = 115o F (46o C) Coil Weight 0.42 Lbs. (0.19 kg)
12
180 Cartridge Material Steel with hardened work surfaces.
2 1 De-energized Zinc-plated exposed surfaces.
150 Buna N or Viton® o-rings.
10
Pressure Drop
2 30
0 0 gpm
0 5 10 15 20 25 30
l/min
0 20 40 60 80 100 120
Flow
C = Cartridge only
AS12 = SAE-12 Ports, aluminum body
SS12 = SAE-12 Ports, steel body
Seals
N = Buna-N
2.95 Max.
(75 Max.)
(73 Max.)
(26.55)
110 = 110 VDC (only available with connector DG)
1.05 AC 24 = 24 VAC
2 115 = 115 VAC (AC coils internally full wave rectified)
(57.2)
2.25
DC DG = EN 175301-803-A
0.34
(8.6)
ø1.43
(ø36.3)
0.94
(23.8)
2.92 Max.
(74 Max.)
0.51
(13)
0.08
(2)
1.81
(46)
2
Standard Line Bodies*
Pressure
1 Code Part No Material
Rating
Weight
ø0.88 Aluminum, 3500 psi 1.39 lbs
(ø22.23) FH122-AS12 03053845
1 1/16-12UN-2A anodized (245 bar) (0.63 kg)
Steel, 6000 psi 4.16 lbs
FH122-SS12 03053772
Zinc plated (420 bar) (1.89 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS16Y allows flow from port 2 to port 1, while flow from
port 1 to port 2 is severely restricted. If this flow path is required see model
1 WS16YR. When energized the valve’s poppet closes on its seat, blocking flow
from port 2 to port 1. Flow from port 1 to port 2 is allowed when hydraulic
pressure generated force (15 to 45 psi (1 to 3 bar)) overcomes solenoid force.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 40 gpm at 4060 psi (150 l/min at 280 bar)
26 gpm at 5000 psi (100 l/min at 350 bar)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 150 ms
De-energized 35 ms
Fluid Compatibility Mineral-based or synthetics with
2 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
1 Installation No orientation restrictions
Cavity FC16-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580250
Performance Finisher: 02580251
Measured at 158 SUS (34 cSt) Cartridge Weight 1.37 Lbs. (0.62 kg)
bar psi Toil = 115oF (46oC)
12 Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
10 150 2 1 De-energized
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
8 PTFE back-up rings.
Pressure Drop
100
6
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
4 Seal Kits Buna-N FS162-N P/N: 03052427
50 Viton® FS162-V P/N: 03051758
2
0 0 gpm
0 5 10 15 20 25 30 35 40
l/min
0 20 40 60 80 100 120 140 160
Flow
C = Cartridge only
AS16 = SAE-16 Ports, aluminum body
SS16 = SAE-16 Ports, steel body
Seals
(80.8 Max.)
3.18 Max.
N = Buna-N
(78.5 Max.)
(25.13)
110 = 110 VDC (only available with connector DG)
0.99 AC 24 = 24 VAC
2 115 = 115 VAC (AC coils internally full wave rectified)
(57.2)
2.25
DC DG = EN 175301-803-A
(75)
3.0
ø1.43
(ø36.3) 0.94
(23.8)
3.11 Max.
(79 Max.)
0.71
(18)
0.08
(2)
(46.5)
1.83
2
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
1 Aluminum, 3500 psi 1.2 lbs
ø1.13 FH162-AS16 03037195
anodized (245 bar) (0.55 kg)
(ø28.5) 1 5/16-12UN-2A Steel, 6000 psi 3.56 lbs
FH162-SS16 03032655
Zinc plated (420 bar) (1.62 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS08Y allows flow from port 2 to port 1, while flow
from port 1 to port 2 is severely restricted. If this flow path is required see
1 model WS08YR. When energized the valve’s poppet closes on its seat, blocking
flow from port 2 to port 1. Flow from port 1 to port 2 is allowed when hydraulic
pressure generated force (130 to 290 psi (9 to 20 bar)) overcomes solenoid force.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• F
ilter screen on the inlet port for protection from contamination getting inside
the cartridge
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8 gpm (30 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68°F (20°C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
2 Response Time (typical) Energized: 50ms
De- 35ms
Energized:
Fluid Compatibility Mineral-Based or Synthetics with
1 lubricating properties.
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406).
Use with filter rated ß10 ≥ 200.
Filter screen 300 µm mesh
Performance Installation No orientation restrictions
Measured at 158 SUS (34 cSt) Cavity FC08-2 (see Line Bodies and Cavities section)
psi
bar Toil = 115o F (46o C) Cavity Tools Rougher: 02580090
8 Finisher: 02580091
100 2 1 De-energized Cartridge Weight 0.31 Lbs. (0.14 kg)
Pressure Drop
C = Cartridge only
AS6 = SAE-6 Ports, aluminum body
SS6 = SAE-6 Ports, steel body
Seals
N = Buna-N
(71 Max.)
(69.5 Max.)
2.8 Max.
V = Viton®
Coil Voltage
7/8” HEX 0 = No coil, cartridge only
Torque 18.5-22 ft-lbs DC 12 = 12 VDC
(Torque 25-30 Nm) 24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
AC 24 = 24 VAC
(15.5)
2
0.61
DC DG = EN 175301-803-A
0.28
(7.1)
ø1.43
(ø36.3) 0.94
(23.8)
(70.5 Max.)
2.78 Max.
0.37
(9.5)
0.08
(2)
(28)
1.1
Operation
When de-energized the WS08YR allows flow from port 2 to port 1 and from
port 1 to port 2. When energized the valve’s poppet closes on its seat, blocking
1 flow from port 2 to port 1. Flow from port 1 to port 2 is allowed when hydraulic
pressure generated force (130 to 290 psi (9 to 20 bar)) overcomes solenoid force.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
• Free reverse flow
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 10 gpm (38 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68°F (20°C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized: 50ms
De- 35ms
Energized:
2 Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties.
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
1 Filtration 21/19/16 or cleaner per (ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies and Cavities section)
Cavity Tools Rougher: 02580090
Finisher: 02580091
Performance Cartridge Weight 0.31 Lbs. (0.14 kg)
Measured at 158 SUS (34 cSt) Coil Weight 0.42 Lbs. (0.19 kg
bar psi Toil = 115o F (46o C)
125 Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
7.5
100 1 2
Buna N or Viton® o-rings.
Pressure Drop
0 0 gpm
2 4 6 8 10
l/min
0 10 20 30 38
Flow
(69.5 Max.)
2.8 Max.
Coil Voltage
7/8” HEX 0 = No coil, cartridge only
Torque 18.5-22 ft-lbs DC 12 = 12 VDC
(Torque 25-30 Nm) 24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
AC 24 = 24 VAC
2
(15.5)
0.61
Coil Connector
(38)
0.28
(7.1)
DC DG = EN 175301-803-A
(50)
2.0
ø1.43
(ø36.3) 0.94
(23.8)
(70.5 Max.)
2.78 Max.
0.37
(9.5)
0.08
(2)
2
(28)
1.1
Operation
When de-energized the WS10YR allows flow from port 2 to port 1 and from
port 1 to port 2. When energized the valve’s poppet closes on its seat, blocking
1 flow from port 2 to port 1. Flow from port 1 to port 2 is allowed when hydraulic
pressure generated force (130 to 290 psi (9 to 20 bar)) overcomes solenoid force.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
• Free reverse flow
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 20 gpm (75 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 55 ms
De-energized 35 ms
Fluid Compatibility Mineral-based or synthetics with
2 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
1 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580274
Finisher: 02580247
Performance Cartridge Weight 0.40 Lbs. (0.182 kg)
Measured at 158 SUS (34 cSt) Coil Weight 0.42 Lbs. (0.190 kg)
bar psi T Oil = 115oF (46oC) Cartridge Material Steel with hardened work surfaces.
12 Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
10 150 2 1 De-energized
PTFE back-up rings.
1 2 Energized
Pressure Drop
0 0 gpm
0 5 10 15 20
l/min
0 10 20 30 40 50 60 70 80
Flow
V = Viton®
2.9 Max.
Coil Voltage
0 = No coil, cartridge only
(73 Max.)
1” HEX DC 12 = 12 VDC
Torque 28-33 ft-lbs 24 = 24 VDC
(Torque 38-45 Nm) 36 = 36 VDC
110 = 110 VDC (only available with connector DG)
AC 24 = 24 VAC
115 = 115 VAC (AC coils internally full wave rectified)
(18.8)
0.74
0.28
(7.1)
(38)
DC DG = EN 175301-803-A
2 DS = Dual spade (SAEJ858a)*
2.13
(55)
ø1.43
(ø36.3)
0.95
(24)
2.74 Max.
(73 Max.)
0.47
(12)
0.80
(2)
1.30
(33)
Operation
When de-energized the WS12YR allows flow from port 2 to port 1 and from
port 1 to port 2. When energized the valve’s poppet closes on its seat, blocking
1 flow from port 2 to port 1. Flow from port 1 to port 2 is allowed when hydraulic
pressure generated force (22 to 94 psi (1.5 to 6.5 bar)) overcomes solenoid force.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
• Free reverse flow
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 29 gpm (110 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 90 ms
De-energized 25 ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
2 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
1 Cavity FC12-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580667
Performance Finisher: 02580668
Measured at 158 SUS (34 cSt) Cartridge Weight 0.60 Lbs. (0.27 kg)
bar psi Toil = 115o F (46o C) Coil Weight 0.42 Lbs. (0.19 kg)
180 Cartridge Material Steel with hardened work surfaces.
12
2 1 De-energized Zinc-plated exposed surfaces.
150 1 2 De-energized
10 Buna N or Viton® o-rings.
Pressure Drop
0 0 gpm
0 5 10 15 20 25 30
l/min
0 20 40 60 80 100 120
Flow
C = Cartridge only
AS12 = SAE-12 Ports, aluminum body
SS12 = SAE-12 Ports, steel body
Seals
N = Buna-N
2.95 Max.
(75 Max.)
(73 Max.)
(26.55)
110 = 110 VDC (only available with connector DG)
1.05 AC 24 = 24 VAC
2 115 = 115 VAC (AC coils internally full wave rectified)
(57.2)
2.25
DC DG = EN 175301-803-A
0.34
(8.6)
ø1.43
(ø36.3)
0.94
(23.8)
2.92 Max.
(74 Max.)
0.51
(13)
0.08
(2)
1.81
(46)
2
Standard Line Bodies*
Pressure
1 Code Part No Material
Rating
Weight
ø0.88 Aluminum, 3500 psi 1.39 lbs
(ø22.23) FH122-AS12 03053845
1 1/16-12UN-2A anodized (245 bar) (0.63 kg)
Steel, 6000 psi 4.16 lbs
FH122-SS12 03053772
Zinc plated (420 bar) (1.89 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS16YR allows flow from port 2 to port 1 and from
port 1 to port 2. When energized the valve’s poppet closes on its seat, blocking
1 flow from port 2 to port 1. Flow from port 1 to port 2 is allowed when hydraulic
pressure generated force (15 to 45 psi (1to 3 bar)) overcomes solenoid force.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
• Free reverse flow
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 40 gpm at 4060 psi (150 l/min at 280 bar)
26 gpm at 5000 psi (100 l/min at 350 bar)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 150 ms
De-energized 35 ms
Fluid Compatibility Mineral-based or synthetics with
2 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
1 Installation No orientation restrictions
Cavity FC16-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580250
Performance Finisher: 02580251
Measured at 158 SUS (34 cSt) Cartridge Weight 1.37 Lbs. (0.62 kg)
bar psi
Toil = 115°F (46°C)
12 Coil Weight 0.42 Lbs. (0.19 kg)
150 2 1 De-energized
Cartridge Material Steel with hardened work surfaces.
10
1 2 De-energized
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
Pressure Drop
8
PTFE back-up rings.
100
6 Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
4 Seal Kits Buna-N FS162-N P/N: 03052427
50
Viton® FS162-V P/N: 03051758
2
0 0 gpm
0 5 10 15 20 25 30 35 40
l/min
0 20 40 60 80 100 120 140 160
Flow
C = Cartridge only
AS16 = SAE-16 Ports, aluminum body
SS16 = SAE-16 Ports, steel body
Seals
(80.8 Max.)
3.18 Max.
N = Buna-N
(78.5 Max.)
(25.13)
110 = 110 VDC (only available with connector DG)
0.99 AC 24 = 24 VAC
2 115 = 115 VAC (AC coils internally full wave rectified)
(57.2)
2.25
DC DG = EN 175301-803-A
(75)
3.0
ø1.43
(ø36.3) 0.94
(23.8)
3.11 Max.
(79 Max.)
0.71
(18)
0.08
(2)
(46.5)
1.83
2
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
1 Aluminum, 3500 psi 1.2 lbs
ø1.13 FH162-AS16 03037195
anodized (245 bar) (0.55 kg)
(ø28.5) 1 5/16-12UN-2A Steel, 6000 psi 3.56 lbs
FH162-SS16 03032655
Zinc plated (420 bar) (1.62 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS08YR allows flow from port 2 to port 1 and from
port 1 to port 2. When energized the valve’s poppet closes on its seat, blocking
1 flow from port 2 to port 1. Flow from port 1 to port 2 is allowed when hydraulic
pressure generated force (130 to 290 psi (9 to 20 bar)) overcomes solenoid force.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Filter screen on the inlet port for protection from contamination
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8 gpm (30 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68°F (20°C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized: 50ms
De- 35ms
2 Energized:
Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties.
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
1
Filtration 21/19/16 or cleaner per (ISO 4406).
Use with filter rated ß10 ≥ 200.
Filter screen 300 µm mesh
Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies and Cavities section)
Performance Cavity Tools Rougher: 02580090
Measured at 158 SUS (34 cSt) Finisher: 02580091
psi
bar Toil = 115o F (46o C)
8
Cartridge Weight 0.31 Lbs. (0.14 kg)
100 Coil Weight 0.42 Lbs. (0.19 kg
2 1 De-energized
Cartridge Material Steel with hardened work surfaces.
Pressure Drop
6
75 Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
4 PTFE back-up rings.
50
Coil Material Class N high temperature magnet wire,
2
steel shell, polyamid encapsulation.
25
Seal Kits Buna-N FS082-N P/N: 03033920
gpm
Viton® FS082-V P/N: 03051756
0 0
0 2 4 6 8
0 10 20 30 l/min
Flow
C = Cartridge only
AS6 = SAE-6 Ports, aluminum body
SS6 = SAE-6 Ports, steel body
Seals
N = Buna-N
(71 Max.)
(69.5 Max.)
2.8 Max.
V = Viton®
Coil Voltage
7/8” HEX 0 = No coil, cartridge only
Torque 18.5-22 ft-lbs DC 12 = 12 VDC
(Torque 25-30 Nm) 24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
AC 24 = 24 VAC
(15.5)
2
0.61
DC DG = EN 175301-803-A
0.28
(7.1)
ø1.43
(ø36.3) 0.94
(23.8)
(70.5 Max.)
2.78 Max.
0.37
(9.5)
0.08
(2)
(28)
1.1
Operation
When de-energized the WS06Z blocks flow from port 2 to port 1, while allowing
flow from port 1 to port 2. When energized the poppet lifts and opens the flow
1 from port 2 to port 1, while the flow from port 1 to port 2 is severely restricted.
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 3.5 gpm (13.3 l/min)
Internal Leakage Leaktight, less than 5 drops/min.
at 5000 psi (350 bar)
Fluid Operating Temp Range -20° to 248°F (-29° to 120°C)
Ambient Temperature Range -20° to 140°F (-29° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw at 68°F (20°C) 984 mA at 12VDC; 492 mA at 24VDC
Minimum Pull-in Current 70% of nominal amperage
to Operate Valve
Typical Response Time Energized: 35ms
(Varies with Pressure and Flow) De-Energized: 50ms
Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties.
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC06-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02582046
Finisher: 02582047
Cartridge Weight 2.7 oz (75 grams)
2
Coil Weight 3.1 oz (88 grams)
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
1 Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
Coil Material Class N, 200°C high temperature magnet wire.
steel shell, polyester encapsulation.
Seal Kits Buna-N FS062-N P/N: 02610184
Performance Viton® FS062-V P/N: 02610185
Measured at 135 SUS (28 cSt)
bar psi
Toil = 100° F (38° C)
400
25
300
20
2 1 Energized
Pressure Drop
1 2 De-energized
15
200
10
100
5
gpm
0 0
0 1 2 3 4 5
l/min
0 5 10 15
Flow
C = Cartridge only
AS4 = SAE-4 Ports, aluminum body
SS4 = SAE-4 Ports, steel body
Seals
11/16” HEX N = Buna-N
Torque 12-15 ft-lbs V = Viton®
(Torque 16-20 Nm) Coil Voltage
0 = No coil, cartridge only
DC 12 = 12 VDC
0.55
(14)
24 = 24 VDC
AC 115 = 105 VDC (only available with connector DG)
2 230 = 205 VDC (only available with connector DG)
(38.1)
(All model 32-1329 coils are DC. AC models require an external diode bridge
1.5
(50.8)
2.0
0.36
(9.1)
0.04
(1.0)
(21.3)
0.84
1
ø0.47
(ø11.9)
Standard Line Bodies*
9/16-18 UNF-2A Pressure
Code Part No Material Weight
Rating
ø0.69 Aluminum, 3500 psi 0.33 lbs
FH062-AS4 02600491
(ø17.9) anodized (245 bar) (0.15 kg)
Steel, 6000 psi 0.97 lbs
FH062-SS4 02600490
Zinc plated (420 bar) (0.44 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS08Z blocks flow from port 2 to port 1, while allowing
flow from port 1 to port 2. When energized the poppet lifts and opens the flow
1 from port 2 to port 1, while the flow from port 1 to port 2 is severely restricted.
If this flow path is required see model WS08ZR.
Operation of Manual Override Option: To override, remove the coil nut, turn
the override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override option
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 10 gpm (38 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
De-energized 50 ms
2 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
1 2
(De-energized)
Coil Material Class N high temperature magnet wire,
2 1
5 75 (Energized) steel shell, polyamid encapsulation.
Seal Kits Buna-N FS082-N P/N: 03033920
50 Viton® FS082-V P/N: 03051756
2.5
25
0 0 gpm
0 2 4 6 8 10
l/min
0 10 20 30 38
Flow
Seals
(56.5 Max.)
N = Buna-N
V = Viton®
Coil Voltage
7/8” HEX 0 = No coil, cartridge only
Torque 18-22 ft-lbs DC 12 = 12 VDC
(Torque 25-30 Nm) 24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
2
(15.5)
AC 24 = 24 VAC
0.61
Coil Connector
0.28
(7.1)
(50)
2.0
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
DL = Leadwires (2) - 18” long (46 cm)*
DW = WeatherPak™ on leadwires - 9.5” long (24 cm)*
DN = Deutsch™ DT04-2P, molded, axial (IP69K Rated)*
1.13 Thick DT = Amp Junior Timer™, molded, radial mount*
(30)
1 AC AG = EN 175301-803-A
3.3 1.62 Coil Model 40-1836
(0.13) (41.1) For other coil connector types consult factory
2.0 *Coils with internal diode are available, consult factory.
(50)
ø1.43
(ø36.3)
0.95
(24)
(57.5 Max.)
2.26 Max.
0.37
(9.5)
0.08
(2)
(28)
2
1.1
Operation
When de-energized the WS10Z blocks flow from port 2 to port 1, while allowing
flow from port 1 to port 2. When energized the poppet lifts and opens the flow
1 from port 2 to port 1, while the flow from port 1 to port 2 is severely restricted.
If this flow path is required see model WS10ZR.
Operation of Manual Override Option: To override, remove the coil nut, turn
the override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override option
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 20 gpm (75 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 30 ms
De-energized 60 ms
Fluid Compatibility Mineral-based or synthetics with
2 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
1 Installation No orientation restrictions
Cavity FC10-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580274
Finisher: 02580247
Cartridge Weight 0.40 Lbs. (0.182 kg)
Performance
Measured at 158 SUS (34 cSt) Coil Weight 0.42 Lbs. (0.190 kg)
bar psi TOil = 115°F (46°C) Cartridge Material Steel with hardened work surfaces.
12 Zinc-plated exposed surfaces.
1 2 Buna N or Viton® o-rings.
150 (De-energized)
10 PTFE back-up rings.
2 1
Pressure Drop
8
(Energized) Coil Material Class N high temperature magnet wire,
100 steel shell, polyamid encapsulation.
6
Seal Kits Buna-N FS102-N P/N: 03033872
4
Viton® FS102-V P/N: 03051757
50
2
0 0 gpm
0 5 10 15 20
l/min
0 10 20 30 40 50 60 70 80
Flow
Seals
N = Buna-N
V = Viton®
Coil Voltage
(59 Max.)
DC DG = EN 175301-803-A
0.28
(7.1)
ø1.43
(ø36.3) 0.95
(24)
2.36
(60)
0.47
(12)
0.08
(2)
1.30
(33)
2
Standard Line Bodies*
Pressure
Code Part No Material Weight
1 Rating
ø0.63 Aluminum, 3500 psi 0.40 lbs
(ø15.88) FH102-AS8 03037778
7/8-14 UNF-2A anodized (245 bar) (0.18 kg)
Steel, 6000 psi 1.16 lbs
FH102-SS8 03037612
Zinc plated (420 bar) (0.53 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS12Z blocks flow from port 2 to port 1, while allowing
flow from port 1 to port 2. When energized the poppet lifts and opens the flow
1 from port 2 to port 1, while the flow from port 1 to port 2 is severely restricted.
If this flow path is required see model WS12ZR.
Operation of Manual Override Option: To override, remove the coil nut, turn
the override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override option
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 29 gpm (110 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 30 ms
2 De-energized 70 ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
1 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC12-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580667
Finisher: 02580668
Performance
Measured at 158 SUS (34 cSt) Cartridge Weight 0.60 Lbs. (0.27 kg)
bar psi Toil = 115o F (46o C) Coil Weight 0.42 Lbs. (0.19 kg)
12
180 Cartridge Material Steel with hardened work surfaces.
2
(Energized)
1 Zinc-plated exposed surfaces.
150 Buna N or Viton® o-rings.
10 1 2
Pressure Drop
(De-energized)
PTFE back-up rings.
120
8
Coil Material Class N high temperature magnet wire,
90 steel shell, polyamid encapsulation.
6
Seal Kits Buna-N FS122-N P/N: 03071298
4 60 Viton® FS122-V P/N: 03071299
2 30
0 0 gpm
0 5 10 15 20 25 30
l/min
0 20 40 60 80 100 120
Flow
C = Cartridge only
AS12 = SAE-12 Ports, aluminum body
SS12 = SAE-12 Ports, steel body
Seals
(60.5 Max.)
N = Buna-N
1 1/4” HEX
V = Viton®
Torque 74-80 ft-lbs
(Torque 100-108 Nm) Coil Voltage
0 = No coil, cartridge only
DC 12 = 12 VDC
(26.55)
24 = 24 VDC
1.05
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
(57.2)
2.25
AC 24 = 24 VAC
2 115 = 115 VAC (AC coils internally full wave rectified)
(75)
0.34
(8.6)
Coil connector
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
2.0 Thick DL = Leadwires (2) - 18” long (46 cm)*
(50.8) DW = WeatherPak™ on leadwires - 9.5” long (24 cm)*
DN = Deutsch™ DT04-2P, molded, axial (IP69K Rated)*
1 DT = Amp Junior Timer™, molded, radial mount*
0.20 2.56
(5.0) (65) AC AG = EN 175301-803-A
3.0 Coil Model 40-1836
(75) For other coil connector types consult factory
*Coils with internal diode are available, consult factory.
ø1.43
(ø36.3)
0.94
(23.8)
(61.5 Max.)
2.42 Max.
0.51
(13)
0.08
(2)
1.81
(46)
1
ø0.88
(ø22.23)
Standard Line Bodies*
1 1/16-12UN-2A
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 1.39 lbs
FH122-AS12 03053845
anodized (245 bar) (0.63 kg)
Steel, 6000 psi 4.16 lbs
FH122-SS12 03053772
Zinc plated (420 bar) (1.89 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS16Z blocks flow from port 2 to port 1, while allowing
flow from port 1 to port 2. When energized the poppet lifts and opens the flow
1 from port 2 to port 1, while the flow from port 1 to port 2 is severely restricted.
If this flow path is required see model WS16ZR.
Operation of Manual Override Option: To override, remove the coil nut, turn
the override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override option
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 40 gpm at 4060 psi (150 l/min at 280 bar)
26 gpm at 5000 psi (100 l/min at 350 bar)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 30 ms
2 De-energized 70 ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
1 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC16-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580250
Performance Finisher: 02580251
Measured at 158 SUS (34 cSt) Cartridge Weight 1.37 Lbs. (0.62 kg)
bar psi
Toil = 115o F (46o C)
12 Coil Weight 0.42 Lbs. (0.19 kg)
1 2 Cartridge Material Steel with hardened work surfaces.
10 150 (De-energized)
Zinc-plated exposed surfaces.
Pressure Drop
2 1
(Energized) Buna N or Viton® o-rings.
8
PTFE back-up rings.
100
6 Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
4 Seal Kits Buna-N FS162-N P/N: 03052427
50
Viton® FS162-V P/N: 03051758
2
0 0 gpm
0 5 10 15 20 25 30 35 40
l/min
0 20 40 60 80 100 120 140 160
Flow
C = Cartridge only
AS16 = SAE-16 Ports, aluminum body
(79.3 Max.)
Seals
N = Buna-N
(65.5 Max.)
V = Viton®
1 1/2” HEX
Coil Voltage
Torque 96-133 ft-lbs 0 = No coil, cartridge only
(Torque 130-180 Nm) DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
(25.13)
2 0.99 AC 24 = 24 VAC
115 = 115 VAC (AC coils internally full wave rectified)
230 = 230 VAC
(57.2)
2.25
Coil Connector
DC DG = EN 175301-803-A
(75)
3.0
0.34
(8.6)
ø1.43
(ø36.3) 0.94
(23.8)
2.60
(66)
0.71
(18)
0.08
(2)
(46.5)
1.83
2
Standard Line Bodies*
1 Code Part No Material
Pressure
Weight
Rating
ø1.13
(ø28.5) Aluminum, 3500 psi 1.2 lbs
1 5/16-12UN-2A FH162-AS16 03037195
anodized (245 bar) (0.55 kg)
Steel, 6000 psi 3.56 lbs
FH162-SS16 03032655
Zinc plated (420 bar) (1.62 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
1 When de-energized the WS08Z-01J blocks flow from port 2 to port 1, while
allowing flow from port 1 to port 2. When energized the poppet lifts and opens
the flow from port 2 to port 1, while the flow from port 1 to port 2 is severely
restricted. If this flow path is required see model WS08ZR-01J.
Operation of Manual Override Option: To manually override pull and hold the
override stem. This override is not detented. The override stem has a male thread
M8X1.25 and hole for a cable attachment. If a cable is used, the internal spring
may not provide enough force to overcome internal cable friction. An external
means of returning the cable must be provided by the user. The manual override
option is intended for emergency use, not for continuous duty operation.
Features
• R
ugged manual override design with thread and hole for a handle
or cable attachment
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 10 gpm (38 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Manual Override Pull Force 38 - 40.5 bs (150 - 180 N)
Max. permissible pull force
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
2 De-energized 50 ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
1
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Performance
Installation No orientation restrictions
Measured at 158 SUS (34 cSt)
bar psi Toil = 115o F (46o C)
Cavity FC08-2 (see Line Bodies & Cavities section)
125 Cavity Tools Rougher: 02580090
7.5 Finisher: 02580091
100
Pressure Drop
1
(De-energized)
2
Cartridge Weight 0.31 Lbs. (0.14 kg)
75
2
(Energized)
1 Coil Weight 0.42 Lbs. (0.19 kg)
5
Cartridge Material Steel with hardened work surfaces.
50 Zinc-plated exposed surfaces.
2.5 Buna N or Viton® o-rings.
25 PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
0 0 gpm steel shell, polyamid encapsulation.
0 2 4 6 8 10
10 20
l/min Seal Kits Buna-N FS082-N P/N: 03033920
0 30 38
Viton® FS082-V P/N: 03051756
Flow
Coil Voltage
0 = No coil, cartridge only
DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
(66.5 Max.)
7/8” HEX 110 = 110 VDC (only available with connector DG)
Torque 18.5-22 ft-lbs
AC 24 = 24 VAC
(Torque 25-30 Nm)
115 = 115 VAC (AC coils internally full wave rectified)
230 = 230 VAC
Coil Connector
2
(15.5)
0.61
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
1.50
(38)
ø1.43
0.63 (ø36.3)
(16)
0.31
M8 x 1.25
(8)
ø0.2 Through
0.16
(ø5 Through)
(4)
0.94
(23.8)
(96.5 Max.)
3.8 Max.
(67.5 Max.)
2.66 Max.
0.37
(9.5)
(80.8)
3.18
0.08
(2.0)
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.34 lbs
ø0.5 FH082-AS6 03011409
anodized (245 bar) (0.15 kg)
(ø12.7) 3/4-16UNF-2A Steel, 6000 psi 1.0 lbs
FH082-SS6 00560917
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS08Z-30 blocks flow from port 2 to port 1, while
allowing flow from port 1 to port 2. When energized the poppet lifts and opens
the flow from port 2 to port 1, while the flow from port 1 to port 2 is severely
restricted. If this flow path is required see model WS08ZR.
1
Operation of Manual Override Option: To override, remove the coil nut, turn
the override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Filter screen on the inlet port for protection from contamination
• Screw type manual override option
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8 gpm (30 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to +60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
2 De-energized 50 ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
1 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Filter screen 300 µm mesh
Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies & Cavities section)
Performance Cavity Tools Rougher: 02580090
Measured at 158 SUS (33 cSt) Finisher: 02580091
bar psi Toil = 115o F (46o C)
125 Cartridge Weight 0.31 Lbs. (0.14 kg)
8 Coil Weight 0.42 Lbs. (0.19 kg)
100 Cartridge Material Steel with hardened work surfaces.
Pressure Drop
1 2
(De-energized)
6
2 1
Zinc-plated exposed surfaces.
75 (Energized) Buna N or Viton® o-rings.
4 PTFE back-up rings.
50 Coil Material Class N high temperature magnet wire,
2
steel shell, polyamid encapsulation.
25
Seal Kits Buna-N FS082-N P/N: 03033920
0 0 gpm Viton® FS082-V P/N: 03051756
0 2 4 6 8
l/min
0 5 10 15 20 25 30
Flow
Seals
(56.5 Max.)
N = Buna-N
V = Viton®
Coil Voltage
0 = No coil, cartridge only
7/8” HEX
DC 12 = 12 VDC
Torque 18.5-22 ft-lbs
24 = 24 VDC
(Torque 25-30 Nm)
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
(15.5) AC 24 = 24 VAC
115 = 115 VAC (AC coils internally full wave rectified)
0.61
ø1.43
(ø36.3)
0.95
(24)
(57.5)
2.26
0.37
(9.5)
0.08
(2.0) (28)
1.1
2
Standard Line Bodies*
Pressure
Code Part No Material Weight
ø0.5
1 Rating
(ø12.7) Aluminum, 3500 psi 0.34 lbs
FH082-AS6 03011409
3/4-16 UNF-2A anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lbs
FH082-SS6 00560917
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS08ZR blocks flow from port 2 to port 1, while allowing
1 flow from port 1 to port 2. When energized the poppet lifts allowing bi-directional
flow between port 1 and port 2.
Operation of Manual Override Option: To override, remove the coil nut, turn
the override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override option
• Free reverse flow
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 10 gpm (38 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
2 De-energized 50 ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
1
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580090
Performance Finisher: 02580091
Measured at 158 SUS (34 cSt) Cartridge Weight 0.31 Lbs. (0.14 kg)
bar psi o o
Toil = 115 F (46 C) Coil Weight 0.42 Lbs. (0.19 kg)
125
Cartridge Material Steel with hardened work surfaces.
7.5 (De-energized)
1 2 Zinc-plated exposed surfaces.
100 Buna N or Viton® o-rings.
1 2
PTFE back-up rings.
Pressure Drop
(Energized)
5 75 2 1
(Energized) Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
50
Seal Kits Buna-N FS082-N P/N: 03033920
2.5
Viton® FS082-V P/N: 03051756
25
gpm
0 0
2 4 6 8 10
0 10 20 30 38 l/min
Flow
Seals
(56.5 Max.)
N = Buna-N
V = Viton®
Coil Voltage
7/8” HEX 0 = No coil, cartridge only
Torque 18-22 ft-lbs DC 12 = 12 VDC
(Torque 25-30 Nm) 24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
2
(15.5)
AC 24 = 24 VAC
0.61
Coil Connector
0.28
(7.1)
(50)
2.0
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
DL = Leadwires (2) - 18” long (46 cm)*
DW = WeatherPak™ on leadwires - 9.5” long (24 cm)*
DN = Deutsch™ DT04-2P, molded, axial (IP69K Rated)*
1.13 Thick DT = Amp Junior Timer™, molded, radial mount*
(30)
1 AC AG = EN 175301-803-A
3.3 1.62 Coil Model 40-1836
(0.13) (41.1) For other coil connector types consult factory
2.0 *Coils with internal diode are available, consult factory.
(50)
ø1.43
(ø36.3)
0.95
(24)
(57.5 Max.)
2.26 Max.
0.37
(9.5)
0.08
(2)
(28)
2
1.1
Operation
When de-energized the WS10ZR blocks flow from port 2 to port 1, while allowing
flow from port 1 to port 2. When energized the poppet lifts allowing bi-directional
1 flow between port 1 and port 2.
Operation of Manual Override Option: To override, remove the coil nut, turn
the override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override option
• Free reverse flow
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 20 gpm (75 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
De-energized 60 ms
2 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
1 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580274
Finisher: 02580247
Cartridge Weight 0.40 Lbs. (0.18 kg)
Performance
Coil Weight 0.42 Lbs. (0.19 kg)
Measured at 158 SUS (34 cSt)
bar
psi TOil = 115o F (46o C) Cartridge Material Steel with hardened work surfaces.
12 Zinc-plated exposed surfaces.
150
1 2 De-energized
Buna N or Viton® o-rings.
10
PTFE back-up rings.
Pressure Drop
2 1 De-energized
1 2 Energized Coil Material Class N high temperature magnet wire,
8
100 steel shell, polyamid encapsulation.
6
Seal Kits Buna-N FS102-N P/N: 03033872
4 Viton® FS102-V P/N: 03051757
50
2
0 0 gpm
0 5 10 15 20
l/min
0 10 20 30 40 50 60 70 80
Flow
Seals
N = Buna-N
V = Viton®
Coil Voltage
(59 Max.)
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
2.13
(55)
ø1.43
(ø36.3) 0.95
(24)
2.36
(60)
0.47
(12)
0.08
(2)
1.30
(33)
2
Standard Line Bodies*
Pressure
1 Code Part No Material
Rating
Weight
ø0.63
(ø15.88) Aluminum, 3500 psi 0.40 lbs
7/8-14 UNF-2A FH102-AS8 03037778
anodized (245 bar) (0.18 kg)
Steel, 6000 psi 1.16 lbs
FH102-SS6 03037612
Zinc plated (420 bar) (0.53 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS12ZR blocks flow from port 2 to port 1, while allowing
flow from port 1 to port 2. When energized the poppet lifts, allowing bi-directional
1 flow between port 1 and port 2.
Operation of Manual Override Option: To override, remove the coil nut, turn
the override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override option
• Free reverse flow
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 29 gpm (110 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
2 De-energized 70 ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
1 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC12-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580667
Finisher: 02580668
Performance
Cartridge Weight 0.60 Lbs. (0.27 kg)
Measured at 158 SUS (34 cSt)
bar psi Toil = 115o F (46o C) Coil Weight 0.42 Lbs. (0.19 kg)
12
180 Cartridge Material Steel with hardened work surfaces.
2 1 Zinc-plated exposed surfaces.
150 1 2 (De-energized) Buna N or Viton® o-rings.
10
1 2 (Energized) PTFE back-up rings.
Pressure Drop
120
8 Coil Material Class N high temperature magnet wire,
90 steel shell, polyamid encapsulation.
6
Seal Kits Buna-N FS122-N P/N: 03071298
4 60 Viton® FS122-V P/N: 03071299
2 30
0 0 gpm
0 5 10 15 20 25 30
l/min
0 20 40 60 80 100 120
Flow
C = Cartridge only
AS12 = SAE-12 Ports, aluminum body
SS12 = SAE-12 Ports, steel body
Seals
(60.5 Max.)
N = Buna-N
1 1/4” HEX
V = Viton®
Torque 74-80 ft-lbs
(Torque 100-108 Nm) Coil Voltage
0 = No coil, cartridge only
DC 12 = 12 VDC
(26.55)
24 = 24 VDC
1.05
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
(57.2)
2.25
AC 24 = 24 VAC
2 115 = 115 VAC (AC coils internally full wave rectified)
(75)
0.34
(8.6)
Coil connector
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
2.0 Thick DL = Leadwires (2) - 18” long (46 cm)*
(50.8) DW = WeatherPak™ on leadwires - 9.5” long (24 cm)*
DN = Deutsch™ DT04-2P, molded, axial (IP69K Rated)*
1 DT = Amp Junior Timer™, molded, radial mount*
0.20 2.56
(5.0) (65) AC AG = EN 175301-803-A
3.0 Coil Model 40-1836
(75) For other coil connector types consult factory
*Coils with internal diode are available, consult factory.
ø1.43
(ø36.3)
0.94
(23.8)
(61.5 Max.)
2.42 Max.
0.51
(13)
0.08
(2)
1.81
(46)
1
ø0.88
(ø22.23)
Standard Line Bodies*
1 1/16-12UN-2A
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 1.39 lbs
FH122-AS12 03053845
anodized (245 bar) (0.63 kg)
Steel, 6000 psi 4.16 lbs
FH122-SS12 03053772
Zinc plated (420 bar) (1.89 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS16ZR blocks flow from port 2 to port 1, while allowing
flow from port 1 to port 2. When energized the poppet lifts, allowing bi-directional
1 flow between port 1 and port 2.
Operation of Manual Override Option: To override, remove the coil nut, turn
the override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override option
• Free reverse flow
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 40 gpm at 4060 psi (150 l/min at 280 bar)
26 gpm at 5000 psi (100 l/min at 350 bar)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
2 De-energized 70 ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
1 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC16-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580250
Performance Finisher: 02580251
Measured at 158 SUS (34 cSt) Cartridge Weight 1.37 Lbs. (0.62 kg)
bar psi Toil = 115o F (46o C)
12 Coil Weight 0.42 Lbs. (0.19 kg)
2 1 (Energized)
Cartridge Material Steel with hardened work surfaces.
10 150 1 2 (Energized)
Zinc-plated exposed surfaces.
1 2
Pressure Drop
(De-energized)
8
Buna N or Viton® o-rings.
PTFE back-up rings.
100
6 Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
4
50 Seal Kits Buna-N FS162-N P/N: 03052427
Viton® FS162-V P/N: 03051758
2
0 0 gpm
0 5 10 15 20 25 30 35 40
l/min
0 20 40 60 80 100 120 140 160
Flow
C = Cartridge only
AS16 = SAE-16 Ports, aluminum body
(79.3 Max.)
Seals
N = Buna-N
(65.5 Max.)
V = Viton®
1 1/2” HEX
Coil Voltage
Torque 96-133 ft-lbs 0 = No coil, cartridge only
(Torque 130-180 Nm) DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
(25.13)
2 0.99 AC 24 = 24 VAC
115 = 115 VAC (AC coils internally full wave rectified)
230 = 230 VAC
(57.2)
2.25
Coil Connector
DC DG = EN 175301-803-A
(75)
3.0
0.34
(8.6)
ø1.43
(ø36.3) 0.94
(23.8)
2.60
(66)
0.71
(18)
0.08
(2)
(46.5)
1.83
2
Standard Line Bodies*
1 Code Part No Material
Pressure
Weight
Rating
ø1.13
(ø28.5) Aluminum, 3500 psi 1.2 lbs
1 5/16-12UN-2A FH162-AS16 03037195
anodized (245 bar) (0.55 kg)
Steel, 6000 psi 3.56 lbs
FH162-SS16 03032655
Zinc plated (420 bar) (1.62 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS08ZR-01J blocks flow from port 2 to port 1, while
allowing flow from port 1 to port 2. When energized the poppet lifts, allowing
1 bi-directional flow between port 1 and port 2.
Operation of Manual Override Option: To manually override pull and hold the
override stem. This override is not detented. The override stem has a male thread
M8X1.25 and hole for a cable attachment. If a cable is used, the internal spring
may not provide enough force to overcome internal cable friction. An external
means of returning the cable must be provided by the user. The manual override
option is intended for emergency use, not for continuous duty operation.
Features
• R
ugged manual override design with thread and hole for a handle or cable
attachment.
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 10 gpm (38 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Manual Override Pull Force 38 - 40.5 bs (150 - 180 N)
Max. permissible pull force
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
De-energized 50 ms
2
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
1 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Performance Cavity FC08-2 (see Line Bodies & Cavities section)
Measured at 158 SUS (34 cSt) Cavity Tools Rougher: 02580090
o o
bar psi Toil = 115 F (46 C) Finisher: 02580091
125
Cartridge Weight 0.31 Lbs. (0.14 kg)
7.5 1 2
100
(De-energized) Coil Weight 0.42 Lbs. (0.19 kg)
1 2
Cartridge Material Steel with hardened work surfaces.
Pressure Drop
(Energized)
5 75
(Energized)
2 1 Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
50 PTFE back-up rings.
2.5 Coil Material Class N high temperature magnet wire,
25 steel shell, polyamid encapsulation.
gpm Seal Kits Buna-N FS082-N P/N: 03033920
0 0
2 4 6 8 10 Viton® FS082-V P/N: 03051756
0 10 20 30 38 l/min
Flow
V = Viton®
Coil Voltage
0 = No coil, cartridge only
DC 12 = 12 VDC
24 = 24 VDC
(66.5 Max.)
Coil Connector
DC DG = EN 175301-803-A
1.50
(38)
ø1.43
0.63 (ø36.3)
(16)
0.31
(8)
M8
ø0.2 Through
0.16
(ø5 Through)
(4)
0.94
(23.8)
(96.5 Max.)
3.8 Max.
(67.5 Max.)
2.66 Max.
(80.8)
3.18
0.37
(9.5)
0.08
(2)
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.34 lbs
ø0.5 FH082-AS6 03011409
anodized (245 bar) (0.15 kg)
(ø12.7) 3/4-16UNF-2A
Steel, 6000 psi 1.0 lbs
FH082-SS6 00560917
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS08ZR blocks flow from port 2 to port 1, while allowing
flow from port 1 to port 2. When energized the poppet lifts allowing bi-directional
flow between port 1 and port 2.
1 Operation of Manual Override Option: To override, remove the coil nut, turn
the override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Filter screen on the inlet port for protection from contamination
• Screw type manual override option
• Free reverse flow
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8 gpm (30 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to +60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
2 De-energized 50 ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
1 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Filter screen 300 µm mesh
Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies & Cavities section)
Performance
Cavity Tools Rougher: 02580090
Measured at 158 SUS (33 cSt) Finisher: 02580091
bar psi Toil = 115o F (46o C)
125 Cartridge Weight 0.31 Lbs. (0.14 kg)
8 Coil Weight 0.42 Lbs. (0.19 kg)
100
Pressure Drop
1
(De-energized)
2 Cartridge Material Steel with hardened work surfaces.
6
2 1
Zinc-plated exposed surfaces.
75 (Energized) Buna N or Viton® o-rings.
4 PTFE back-up rings.
50
Coil Material Class N high temperature magnet wire,
2 steel shell, polyamid encapsulation.
25
Seal Kits Buna-N FS082-N P/N: 03033920
0 0 gpm Viton® FS082-V P/N: 03051756
0 2 4 6 8
l/min
0 5 10 15 20 25 30
Flow
Seals
(56.5 Max.)
N = Buna-N
V = Viton®
Coil Voltage
0 = No coil, cartridge only
7/8” HEX
DC 12 = 12 VDC
Torque 18.5-22 ft-lbs
24 = 24 VDC
(Torque 25-30 Nm)
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
(15.5) AC 24 = 24 VAC
115 = 115 VAC (AC coils internally full wave rectified)
0.61
ø1.43
(ø36.3)
0.95
(24)
(57.5)
2.26
0.37
(9.5)
0.08
(2.0) (28)
1.1
2
Standard Line Bodies*
Pressure
Code Part No Material Weight
ø0.5
1 Rating
(ø12.7) Aluminum, 3500 psi 0.34 lbs
FH082-AS6 03011409
3/4-16 UNF-2A anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lbs
FH082-SS6 00560917
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS08V allows flow in both directions. When energized
the poppet closes and oblocks the flow from port 2 to port 1 and from port 1
1 to port 2.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 5 gpm (19 l/min)
Internal Leakage Leaktight, less than 2 drops/min. at 3600 psi
(0.10 cc/min at 250 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
De-energized 50 ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
2 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580090
1 Finisher: 02580091
Cartridge Weight 0.31 Lbs. (0.14 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Performance Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Measured at 158 SUS (34 cSt) Buna N or Viton® o-rings.
bar psi
Toil = 115o F (46o C) PTFE back-up rings.
200
12.5
175 Coil Material Class N high temperature magnet wire,
1 2 Energized
2 1 Energized
steel shell, polyamid encapsulation.
10 150
Pressure Drop
C = Cartridge only
AS6 = SAE-6 Ports, aluminum body
SS6 = SAE-6 Ports, steel body
Seals
(72.5) Max.
N = Buna-N
2.95 Max.
(75) Max.
V = Viton®
Coil Voltage
7/8” HEX 0 = No coil, cartridge only
Torque 18.5-22 ft-lbs DC 12 = 12 VDC
(Torque 25-30 Nm) 24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
AC 24 = 24 VAC
(15.5)
0.61
Coil Connector
0.28
(7.1)
DC DG = EN 175301-803-A
(50)
2.0
ø1.43
(ø36.3)
0.95
(24)
(73.5 Max.)
2.89 Max.
(12.5)
0.49
0.10
(2.5)
2
Standard Line Bodies*
Pressure
ø0.5
1 Code Part No Material
Rating
Weight
(ø12.7) Aluminum, 3500 psi 0.34 lbs
3/4-16 UNF-2A FH082-AS6 03011409
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lbs
FH082-SS6 00560917
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS08W blocks flow , leakfree, in both directions. When
energized the poppet lifts and opens the flow from port 2 to port 1 and from port
1 1 to port 2.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• One piece cartridge body design to maximize reliability
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 3600 psi (250 bar)
Nominal Flow 5 gpm (19 l/min)
Internal Leakage Leaktight, less than 2 drops/min. at 3600 psi
(0.10 cc/min at 250 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
De-energized 50 ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
2
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
1 Cavity FC08-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580090
Finisher: 02580091
Cartridge Weight 0.31 Lbs. (0.14 kg)
Performance Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Measured at 158 SUS (34 cSt)
bar psi Zinc-plated exposed surfaces.
Toil = 115o F (46o C)
200 Buna N or Viton® o-rings.
12.5 PTFE back-up rings.
175 1 2 Energized
2 1 Energized Coil Material Class N high temperature magnet wire,
10 150
Pressure Drop
C = Cartridge only
AS6 = SAE-6 Ports, aluminum body
SS6 = SAE-6 Ports, steel body
(71) Max.
Seals
2.8 Max.
(69.5) Max.
N = Buna-N
V = Viton®
Coil Voltage
7/8” HEX 0 = No coil, cartridge only
Torque 18.5-22 ft-lbs DC 12 = 12 VDC
(Torque 25-30 Nm) 24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
AC 24 = 24 VAC
(15.5)
0.61
DC DG = EN 175301-803-A
0.28
(7.1)
ø1.43
(ø36.3)
0.95
(24)
(70.5 Max.)
2.78 Max.
0.37
(9.5)
0.08
(2)
2
Pressure
Code Part No Material Weight
Rating
1 Aluminum, 3500 psi 0.34 lbs
FH082-AS6 03011409
ø0.5 anodized (245 bar) (0.15 kg)
(ø12.7) 3/4-16 UNF-2A Steel, 6000 psi 1.0 lbs
FH082-SS6 00560917
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS10W blocks flow , leakfree, in both directions. When
energized the poppet lifts and opens the flow from port 2 to port 1 and from port
1 1 to port 2.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• One piece cartridge body design to maximize reliability
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 10.5 gpm (40 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
De-energized 50 ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
2 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
1 Cavity FC10-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580274
Finisher: 02580247
Cartridge Weight 0.40 Lbs. (0.18 kg)
Performance Coil Weight 0.51 Lbs. (0.23 kg)
Measured at 158 SUS (34 cSt) Cartridge Material Steel with hardened work surfaces.
bar psi Toil = 115°F (46°C) Zinc-plated exposed surfaces.
15
Buna N or Viton® o-rings.
1 2 Energized PTFE back-up rings.
200
2 1 Energized Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Pressure Drop
10 150
Seal Kits Buna-N FS102-N P/N: 03033872
Viton® FS102-V P/N: 03051757
100
5
50
0 0 gpm
0 2 4 6 8 10
l/min
0 10 20 30 40
Flow
C = Cartridge only
AS8 = SAE-8 Ports, aluminum body
SS8 = SAE-8 Ports, steel body
(84.8) Max.
3.34 Max.
Seals
N = Buna-N
(82.5) Max.
V = Viton®
Coil Voltage
1” HEX 0 = No coil, cartridge only
Torque 28-33 ft-lbs DC 12 = 12 VDC
(Torque 38-45 Nm) 24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
AC 24 = 24 VAC
(18.8)
2
0.74
DC DG = EN 175301-803-A
2.13
(55)
ø1.43
(ø36.3)
0.95
(24)
3.27 Max.
(83 Max.)
0.47
(12)
0.08
(2)
(33)
1.3
Operation
When de-energized the WS08W blocks flow , leakfree, in both directions. When
energized the poppet lifts and opens the flow from port 2 to port 1 and from port
1 to port 2.
Operation of Manual Override Option: To override, push and hold the override
1 button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• F
ilter screen on port 2 for protection from contamination getting inside
the cartridge
• One piece cartridge body design to maximize reliability
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 3600 psi (250 bar)
Nominal Flow 5 gpm (19 l/min)
Internal Leakage Leaktight, less than 2 drops/min. at 3600 psi
(0.10 cc/min at 250 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to +60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
De-energized 50 ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
2
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Filter screen 300 µm mesh
1
Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580090
Performance Finisher: 02580091
Measured at 158 SUS (34 cSt) Cartridge Weight 0.31 Lbs. (0.14 kg)
bar psi
Toil = 115o F (46o C)
200 Coil Weight 0.42 Lbs. (0.19 kg)
12.5 Cartridge Material Steel with hardened work surfaces.
175 1 2 Energized
2 1 Energized Zinc-plated exposed surfaces.
10 150
Pressure Drop
Seals
2.8 Max.
N = Buna-N
V = Viton®
(69.5) Max.
Coil Voltage
7/8” HEX 0 = No coil, cartridge only
Torque 18-22 ft-lbs DC 12 = 12 VDC
(Torque 25-30 Nm) 24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
(15.5) AC 24 = 24 VAC
2
0.61
Coil Connector
DC DG = EN 175301-803-A
0.28
(7.1)
ø1.43
(ø36.3)
0.95
(24)
(70.5 Max.)
2.78 Max.
0.37
(9.5)
0.08
(2)
(28)
1.1
2
Standard Line Bodies*
Pressure
1 Code Part No Material
Rating
Weight
ø0.5
(ø12.7) Aluminum, 3500 psi 0.34 lbs
3/4-16 UNF-2A FH082-AS6 03011409
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lbs
FH082-SS6 00560917
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS08W-51 blocks flow, leakfree at port 3 and allows flow
from port 1 to port 2. When energized, flow is blocked at port 1 and allowed from
1 3 port 2 to port 3.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 4000 psi (280 bar)
Nominal Flow 5 gpm (19 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 4000 psi
(0.25 cc/min at 280 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
De-energized 45 ms
Fluid Compatibility Mineral-based or synthetics with
3 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
2 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC08-3 (see Line Bodies & Cavities section)
1 Cavity Tools Rougher: 02580086
Finisher: 02580087
Cartridge Weight 0.87 Lbs. (0.39 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Performance Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Measured at 158 SUS (34 cSt)
bar psi Toil = 115°F (46°C) Buna N or Viton® o-rings.
400 PTFE back-up rings.
25 1
2
2
3
Coil Material Class N high temperature magnet wire,
300
steel shell, polyamid encapsulation.
Pressure Drop
20
Seal Kits Buna-N FS083-N P/N: 03054795
15
Viton® FS082-V P/N: 02591059
200
10
100
5
0 0 gpm
0 1 2 3 4 5
5 10 l/min
0 15 20
Flow Rate
V = Viton®
Torque 18.5-22 ft-lbs Coil Voltage
(Torque 25-30 Nm) 0 = No coil, cartridge only
DC 12 = 12 VDC
24 = 24 VDC
(15.2)
36 = 36 VDC
0.6 110 = 110 VDC (only available with connector DG)
1.18
(30)
AC 24 = 24 VAC
2 3 115 = 115 VAC (AC coils internally full wave rectified)
(53.8)
Coil Connector
(66.5)
DC DG = EN 175301-803-A
26.2
0.28
(7.1)
ø1.43
(ø 36.3) Operating Limits
0.95
(24) Measured at 158 SUS (34 cSt)
bar psi
Toil = 115°F (46°C)
400
Pressure
3000
200
2000
100
0.67
1000
(17)
0 0 gpm
0 1 2 3 4 5
0.08
(2.0)
5 10 l/min
0 15 20
Flow
3
1.61
(41)
2
Standard Line Bodies*
Pressure
1 ø0.56
Code Part No Material
Rating
Weight
(ø14.27) Aluminum, 3500 psi 0.58 lbs
FH083-AS6 03011424
ø0.63 anodized (245 bar) (0.15 kg)
(ø15.88) Steel, 6000 psi 1.7 lbs
3/4-16 UNF-2A FH082-SS6 00560920
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm). *Please refer to Line Bodies & Cavities section for details
Subject to technical modifications Note: Orifice plug not permitted at port 1
Operation
When de-energized the WK06V allows bi-directional flow. When energized the
spool shifts and blocks flow in both directions.
Operation of Manual Override Option: To override, push and hold the override
1 button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow See Operating Limits
Internal Leakage 5.5 cu in/min at 3600 psi and 135 SUS
(90cc/min at 248 bar at 28cSt)
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -20° to 140°F (-29° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68°F (20°C) 984 mA at 12VDC; 492 mA at 24VDC
Min. Pull-in Current to 80% of nominal amperage
Operate Valve
Typical Response Time Energized 50ms
(Varies with Pressure and Flow) De-energized 35ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
2
Cavity FC06-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02582046
Finisher: 02582047
1 Cartridge Weight 0.17 lb (0.08 kg)
Coil Weight 0.19 lb (0.09 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Performance Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
Measured at 135 SUS (28 cSt)
bar psi Toil = 100°F (38°C) Coil Material Class N, 200°C high temperature magnet wire,
14 200
steel shell, polyester encapsulation.
12 2 1 Seal Kits Buna-N FS062-N P/N: 02610184
150
1 2 Viton® FS062-V P/N: 02610185
10
Pressure Drop
8
100
6
4
50
2
0 0 gpm
0 1 2 3 4
l/min
0 2 4 6 8 10 12 14
Flow
2 Coil Connector
DC DG = DIN 43650 Form B (IP65 Rated)**
1.50
(38.1)
(50.8)
2.00
ø1.13
(ø28.7) 1.33
Operating Limits
(33.8) @ 70% current Measured at 135 SUS (28 cSt)
bar psi Toil = 100°F (38°C)
5000
300
4000
Pressure Drop
1 2
200 3000 2 1
(58.4) Max.
2.30 Max.
2000
100
1000
0 0 gpm
0 1 2 3 4
l/min
0 2 4 6 8 10 12 14
Flow
0.36
(9.1)
0.04
(1)
(21.3)
0.84
2
Standard Line Bodies*
1 Code Part No Material
Pressure
Weight
ø0.47 Rating
(ø11.9) 9/16-18 UNF-2A Aluminum, 3500 psi 0.34 lbs
FH062-AS4 02600491
ø0.69 anodized (245 bar) (0.15 kg)
(ø17.5) Steel, 6000 psi 1.0 lbs
FH062-SS4 02600490
zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK08V allows bi-directional flow. When energized the
spool shifts and blocks flow in both directions.
Operation of Manual Override Option: To override, push and hold the override
1 button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 5 gpm (19 l/min)
Internal Leakage 5.5 cu in/min. at 3000 psi and 158 SUS
(90 cc/min at 210 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580090
Finisher: 02580091
Cartridge Weight 0.38 Lbs. (0.17 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
1 Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Performance Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Measured at 158 SUS (34 cSt)
psi Seal Kits Buna-N FS082-N P/N: 03033920
bar Toil = 115°F (46°C)
200 Viton® FS082-V P/N: 03051756
12.5 1 2
10 150
Pressure Drop
100
5
50
0 0 gpm
0 1 2 3 4 5 6
l/min
0 5 10 15 20
Flow
Seals
(73 Max.)
N = Buna-N
V = Viton®
(69.5 Max.)
Coil Voltage
7/8” HEX 0 = No coil, cartridge only
Torque 18.5-22 ft-lbs DC 12 = 12 VDC
(Torque 25-30 Nm) 24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
AC 24 = 24 VAC
2 115 = 115 VAC (AC coils internally full wave rectified)
230 = 230 VAC
1.50
(38)
0.28
(7.1)
Coil Connector
(15.5)
(50)
0.61
2.0
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
DL = Leadwires (2) - 18” long (46 cm)*
DW = WeatherPak™ on leadwires - 9.5” long (24 cm)*
1.13 Thick
DN = Deutsch™ DT04-2P, molded, axial (IP69K Rated)*
(30)
DT = Amp Junior Timer™, molded, radial mount*
1 AC AG = EN 175301-803-A
0.13 1.62 Coil Model 40-1836
(3.3) (41.1) For other coil connector types consult factory
*Coils with internal diode are available, consult factory.
2.0
(50)
ø1.43
(ø36.3)
0.95
(24)
(70.5 Max.)
2.78 Max.
0.37
(9.5)
0.08
(2.0)
1.10
(28)
2
Standard Line Bodies*
1 Pressure
Code Part No Material Weight
ø0.50 Rating
(ø12.7) Aluminum, 3500 psi 0.34 lbs
FH082-AS6 03011409
3/4-16 UNF-2A anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lbs
FH082-SS6 00560917
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10V allows bi-directional flow . When energized the
spool shifts and blocks flow in both directions.
Operation of Manual Override Option: To override, push and hold the override
1 button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 9 gpm (35 l/min)
Internal Leakage 7.3 cu in/min. at 3600 psi and 158 SUS
(120 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-2 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580274
Finisher: 02580247
Cartridge Weight 0.48 Lbs. (0.22 kg)
Coil Weight 0.51 Lbs. (0.23 kg)
1 Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Performance Coil Material Class N high temperature magnet wire,
bar psi
Measured at 158 SUS (34 cSt) steel shell, polyamid encapsulation.
T Oil = 115°F (46°C)
7.5 Seal Kits Buna-N FS102-N P/N: 03033872
100
Viton® FS102-V P/N: 03051757
1 2
75 2 1
5
Pressure Drop
50
2.5
25
0 0 gpm
0 2 4 6 8 10
l/min
0 5 10 15 20 25 30 35 40
Flow Rate
C = Cartridge only
AS8 = SAE-8 Ports, aluminum body
SS8 = SAE-8 Ports, steel body
(83.8 Max.)
3.30 Max.
Seals
N = Buna-N
(81.5 Max.)
V = Viton®
Coil Voltage
1” HEX 0 = No coil, cartridge only
Torque 28-33 ft-lbs DC 12 = 12 VDC
(Torque 38-45 Nm) 24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
AC 24 = 24 VAC
(18.8)
0.74
Coil Connector
0.28
(7.1)
DC DG = EN 175301-803-A
2.13
(55)
ø1.43
(ø36.3) 0.95
(24)
3.23
(82)
0.43
(11)
0.08
(2) (33)
1.3
Operation
When de-energized the WK06W blocks flow in both directions. When
energized the spool shifts and opens the bidirectional flow path.
1
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 2.5 gpm (9.5 l/min)
Internal Leakage 5.5 cu in/min. at 3000 psi and 135 SUS
(90 cc/min at 207 bar and 28 cSt)
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Ambient Temperature Range -20° to 140°F (-29° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw at 68°F (20°C) 984 mA at 12VDC; 492 mA at 24VDC
Min. Pull-in Current to 70% of nominal amperage
Operate Valve
Fluid Compatibility Mineral-Based or Synthetics
with lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC06-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02582046
Finisher: 02582047
Cartridge Weight 2.7 oz (75 grams)
Coil Weight 3.1 oz (88 grams)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
2 Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
Coil Material Class N, 200°C high temperature magnet wire,
steel shell, polyester encapsulation
1 Seal Kits Buna-N FS062-N P/N: 02610184
Viton® FS062-V P/N: 02610185
Performance
Measured at 135 SUS (28 cSt)
bar psi
Toil = 100°F (38°C)
14 200
12
150 2 1
10
Pressure Drop
1 2
8
100
6
4
50
2
gpm
0 0
0 1 2 3 4
l/min
0 5 10 15
Flow
C = Cartridge only
AS4 = SAE-4 Ports, aluminum body
11/16” HEX Torque SS4 = SAE-4 Ports, steel body
12-15 ft-lbs Seals
(Torque 16-20 Nm) N = Buna-N
V = Viton®
Coil Voltage
0.55 0 = No coil, cartridge only
(14)
DC 12 = 12 VDC
24 = 24 VDC
(50.8)
(38.1)
1.5
(All model 32-1329 coils are DC. AC models require an external diode bridge
mounted outside the coil)**
Coil Connector
DG = EN 175301-803-B (IP65 Rated)**
DC DL = Leadwires (2) - 18” long (46 cm) AWG18, TYPE UL 1815
(IP69K Rated)*
1 1.0 Thick DN = Deutsch DT04-2P intergral molded (IP69K Rated)*
(25.4) Use mating plug EN 175301-803-B without diode bridge for
0.25 1.5
DC voltages P/N 02600570
(6.4) (38.1)
Use mating plug EN 175301-803-B w/diode bridge for
2.0 AC voltages P/N 02600582
(50.8)
Coil Model 32-1329
For other coil connector types consult factory
ø1.13 ** Mating Plugs sold separately
(ø28.7) *Coils with internal transient suppression diode are available, consult factory.
1.33
(33.8) Operating Limits
Measured at 135 SUS (28 cSt)
bar psi Toil = 100°F (38°C)
350 5000
300
4000
250
Pressure
(58.4) Max
3000
2.3 Max
200
150
2000
100
0.36
(9.1)
1000 1 2
50 2 1
0 0 gpm
0 1 2 3 4
l/min
0 5 10 15
Flow
(21.3)
0.84
0.04
(1.0)
1
ø0.47 Standard Line Bodies*
(ø11.9) Pressure
9/16-18 UNF-2A Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.33 lbs
ø0.69 FH062-AS4 02600491
anodized (245 bar) (0.15 kg)
(ø17.9)
Steel, 6000 psi 0.97 lbs
FH062-SS4 02600490
Zinc plated (420 bar) (0.44 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK08W blocks flow in both directions. When energized
the spool shifts and opens the bidirectional flow path.
Operation of Manual Override Option: To override, remove the coil nut, turn
1 the override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override option
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 5 gpm (19 l/min)
Internal Leakage 5.5 cu in/min. at 3000 psi and 158 SUS
(90 cc/min at 210 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
2 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580090
1 Finisher: 02580091
Cartridge Weight 0.38 Lbs. (0.17 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
Performance PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
Measured at 158 SUS (34 cSt)
psi steel shell, polyamid encapsulation.
bar T Oil = 115oF (46oC)
200 Seal Kits Buna-N FS082-N P/N: 03033920
12.5 175 Viton® FS082-V P/N: 03051756
2 1
10 150
Pressure Drop
125
7.5
100
5 75
50
2.5
25
0 0 gpm
0 1 2 3 4 5 6
l/min
0 5 10 15 20
Flow
Seals
N = Buna-N
V = Viton®
Coil Voltage
(59 Max.)
ø1.43
(ø36.3)
0.95
(24)
2.36 Max.
(60 Max.)
0.47
(12)
0.08
(2.0)
1.10
(28)
ø0.50
1 FH082-AS6 03011409
Aluminum, 3500 psi 0.33 lbs
anodized (245 bar) (0.15 kg)
(ø12.7)
3/4-16 UNF-2A Steel, 6000 psi 1.0 lbs
FH082-SS6 00560917
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10W blocks flow in both directions. When energized
the spool shifts and opens the bidirectional flow path.
Operation of Manual Override Option: To override, remove the coil nut, turn
1 the override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override option
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 9 gpm (35 l/min)
Internal Leakage 7.3 cu in/min. at 5000 psi and 158 SUS
(120 cc/min at 350 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F 85% of nominal @ 5000 psi (350 bar)
(20˚C)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
2 Cavity FC10-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580274
Finisher: 02580247
1 Cartridge Weight 0.48 Lbs. (0.22 kg)
Coil Weight 0.51 Lbs. (0.23 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Performance Buna N or Viton® o-rings.
Measured at 158 SUS (34 cSt) PTFE back-up rings.
bar psi TOil = 115°F (46°C) Coil Material Class N high temperature magnet wire,
10
steel shell, polyamid encapsulation.
125
1 2 Seal Kits Buna-N FS102-N P/N: 03033872
7.5
100
2 1 Viton® FS102-V P/N: 03051757
Pressure Drop
75
5
50
2.5
25
0 0 gpm
0 2 4 6 8 10
l/min
0 5 10 15 20 25 30 35 40
Flow Rate
Seals
N = Buna-N
V = Viton®
(71.5 Max.)
Coil Voltage
0 = No coil, cartridge only
1” HEX DC 12 = 12 VDC
Torque 28-33 ft-lbs 24 = 24 VDC
(Torque 38-45 Nm) 36 = 36 VDC
110 = 110 VDC (only available with connector DG)
AC 24 = 24 VAC
115 = 115 VAC (AC coils internally full wave rectified)
(18.8)
0.74
2
0.28
DC DG = EN 175301-803-A
(7.1)
ø1.43
(ø36.3)
0.95
(24)
2.84
(72)
0.55
(14)
0.08
(2.0)
1.30
(33)
2
Standard Line Bodies*
Pressure
1 Code Part No Material
Rating
Weight
ø0.63
(ø15.88) Aluminum, 3500 psi 0.40 lbs
FH102-AS8 03037778
anodized (245 bar) (0.18 kg)
7/8-14 UNF-2A Steel, 6000 psi 1.16 lbs
FH102-SS8 03037612
Zinc plated (420 bar) (0.53 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK06C allows flow from port 2 to port 1 bi-directionally,
while blocking flow at port 3. When energized the spool shifts and opens flow
from port 2 to port 3 bi-directionally, while blocking flow at port 1.
3 1
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 4 gpm (15 l/min)
Internal Leakage 5.5 cu in/min. at 3000 psi and 135 SUS
(90 cc/min at 207 bar and 28 cSt)
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Ambient Temperature Range -20° to 140°F (-29° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw at 68°F (20°C) 984 mA at 12VDC; 492 mA at 24VDC
Minimum Pull-in Current 70% of nominal amperage
to Operate Valve
Typical Response Time On: 30 to 60 ms
(Varies with Pressure and Flow) Off: 20 to 40 ms
Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC06-3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02582050
3 Finisher: 02582051
Cartridge Weight 3.0 oz (85 grams)
Coil Weight 3.1 oz (88 grams)
2 Cartridge Material Steel with hardened work surfaces.
Zinc plated solenoid tube surface.
Buna N or Viton® o-rings
1 Solid thermoplastic polyester back-up rings.
Coil Material Class N, 200°C high temperature magnet wire,
steel shell, polyester encapsulation
Seal Kits Buna-N FS063-N P/N: 02610186
Performance Viton® FS063-V P/N: 02610187
Measured at 135 SUS (28 cSt)
bar psi Toil = 100°F (38°C)
10 150
8 125
3 2
Pressure Drop
100
6
2 1
75
4
50
2
25
gpm
0 0
0 1 2 3 4
l/min
0 5 10 15
Flow
2
2.25
24 = 24 VDC
AC 115 = 105 VDC (only available with connector DG)
230 = 205 VDC (only available with connector DG)
(All model 32-1329 coils are DC. AC models require an external diode bridge
mounted outside the coil)**
1.0 Thick Coil Connector
1 (25.4) DG = EN 175301-803-B (IP65 Rated)**
0.28
(7.1)
1.33
(33.8)
Operating Limits
Measured at 135 SUS (34 cSt)
bar psi Toil = 100°F (38°C)
350
5000
300
4000
(58.4) Max
250
2.3 Max
Pressure
200 3000
0.36
(9.1)
150
2000
100
2 3
1000
50 2 1
3 2
0 0 gpm
0 1 2 3 4 5
l/min
0 5 10 15
0.04
Flow
3
(1)
(31.2)
1.23
1
ø0.44
(ø11.2)
ø0.47 Standard Line Bodies*
(ø11.9) Pressure
9/16-18 UNF-2A Code Part No Material Weight
Rating
ø0.69 Aluminum, 3500 psi 0.37 lbs
FH063-AS4 02600492
(ø17.5) anodized (245 bar) (0.17 kg)
Steel, 6000 psi 1.07 lbs
FH063-SS4 02600493
zinc plated (420 bar) (0.43 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK08C allows flow from port 2 to port 1 bi-directionally,
while blocking flow at port 3. When energized the spool shifts and opens flow
from port 2 to port 3 bi-directionally, while blocking flow at port 1.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 5 gpm (19 l/min)
Internal Leakage 5.5 cu in/min. at 3600 psi and 158 SUS
(90 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
3 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
2 Cavity FC08-3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580086
Finisher: 02580087
Cartridge Weight 0.40 Lbs. (0.18 kg)
1 Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
Performance steel shell, polyamid encapsulation.
Measured at 158 SUS (34 cSt)
bar psi o o
Toil = 115 F (46 C) Seal Kits Buna-N FS083-N P/N: 03054795
12.1 175 Viton® FS083-V P/N: 02591059
10.3 150 3 2
2 1
8.6 125
Pressure Drop
6.9 100
5.2 75
3.4 50
1.7 25
0 0 gpm
0 1 2 3 4 5
l/min
0 3.8 7.6 11.5 15.1 19.1
Flow
Seals
(69.5 Max.)
N = Buna-N
V = Viton®
7/8” HEX
Coil Voltage
Torque 18.5-22 ft-lbs
0 = No coil, cartridge only
(Torque 25-30 Nm)
DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
(15.2)
0.60 110 = 110 VDC (only available with connector DG)
(29.7)
1.17
AC 24 = 24 VAC
3 115 = 115 VAC (AC coils internally full wave rectified)
2 230 = 230 VAC
(53.8)
(66.5)
2.12
2.62
Coil Connector
0.28
(7.1)
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
DL = Leadwires (2) - 18” long (46 cm)*
DW = WeatherPak™ on leadwires - 9.5” long (24 cm)*
1.13 Thick
DN = Deutsch™ DT04-2P, molded, axial (IP69K Rated)*
(30)
DT = Amp Junior Timer™, molded, radial mount*
1 AC AG = EN 175301-803-A
4.6 2.0
Coil Model 40-1836
(0.18) (50.8)
2.5 For other coil connector types consult factory
(60) *Coils with internal diode are available, consult factory.
ø1.43
(ø36.3)
0.95
Operating Limits
Measured at 158 SUS (34 cSt)
(24) bar psi Toil = 115° F (46° C)
350
5000
300 2 1
2 3
4000
250 3 2
1 2
Pressure
200 3000
(70.5 Max.)
2.78 Max.
150
2000
100
0.37
(9.5)
1000
50
0.08
(2)
0 0 gpm
0 2 4 6 8
l/min
0 5 10 15 20 25 30
Flow
3
1.61
(41)
Operation
When de-energized the WK10C allows flow from port 2 to port 1 bi-directionally,
while blocking flow at port 3. When energized the spool shifts and opens flow
from port 2 to port 3 bi-directionally, while blocking flow at port 1.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8.4 gpm (32 l/min)
Internal Leakage 7.3 cu in/min. at 3600 psi and 158 SUS
(120 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
3 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-3 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580092
Finisher: 02580093
Cartridge Weight 0.52 Lbs. (0.24 kg)
1 Coil Weight 0.51 Lbs. (0.23 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
Performance PTFE back-up rings.
Measured at 34 cSt (158 SUS) Coil Material Class N high temperature magnet wire,
bar psi T Oil = 46°C (115°F) steel shell, polyamid encapsulation.
8 120 Seal Kits Buna-N FS103-N P/N: 03071274
3 2
1 2
Viton® FS103-V P/N: 03049443
6 90 2 3
2 1
Flow
4 60
2 30
0 0 gpm
0 2 4 6 8
0 10 20 30 35 l/min
Pressure
C = Cartridge only
AS8 = SAE-8 Ports, aluminum body
SS8 = SAE-8 Ports, steel body
(83.8 Max.)
3.30 Max.
Seals
(81.5 Max.)
N = Buna-N
V = Viton®
Coil Voltage
1” HEX 0 = No coil, cartridge only
Torque 28-33 ft-lbs DC 12 = 12 VDC
(Torque 38-45 Nm) 24 = 24 VDC
36 = 36 VDC
(18.3) 110 = 110 VDC (only available with connector DG)
0.72
AC 24 = 24 VAC
3 115 = 115 VAC (AC coils internally full wave rectified)
1.38
(35)
Coil Connector
2.12
2 DC DG = EN 175301-803-A
(66.5)
2.62
200 3000
150
2000
100
1000
50
3.23 Max.
(82 Max.)
0 0 gpm
0 3 6 9
l/min
0 10 20 30 35
Flow
0.43
(11)
0.08
(2.0)
Pressure
2 Code Part No Material
Rating
Weight
Operation
When de-energized the WK10C allows flow from port 2 to port 1 bi-directionally,
while blocking flow at port 3. When energized the spool shifts and opens flow
from port 2 to port 3 bi-directionally, while blocking flow at port 1.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8.4 gpm (32 l/min)
Internal Leakage 18 cu in/min. at 3600 psi and 158 SUS
(250 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
3 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-3 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580092
Finisher: 02580093
Cartridge Weight 0.52 Lbs. (0.24 kg)
1 Coil Weight 0.51 Lbs. (0.23 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
Performance PTFE back-up rings.
Measured at 34 cSt (158 SUS) Coil Material Class N high temperature magnet wire,
bar psi T Oil = 46°C (115°F) steel shell, polyamid encapsulation.
8 120 Seal Kits Buna-N FS103-N P/N: 03071274
3 2 Viton® FS103-V P/N: 03049443
1 2&2 3
6 90 2 1
Flow
4 60
2 30
0 0 gpm
0 2 4 6 8
0 10 20 30 35 l/min
Pressure
C = Cartridge only
AS8 = SAE-8 Ports, aluminum body
SS8 = SAE-8 Ports, steel body
(83.8 Max.)
3.30 Max.
Seals
(81.5 Max.)
N = Buna-N
V = Viton®
Coil Voltage
1” HEX 0 = No coil, cartridge only
Torque 28-33 ft-lbs DC 12 = 12 VDC
(Torque 38-45 Nm) 24 = 24 VDC
36 = 36 VDC
(18.3) 110 = 110 VDC (only available with connector DG)
0.72
AC 24 = 24 VAC
3 115 = 115 VAC (AC coils internally full wave rectified)
1.38
(35)
Coil Connector
2.12
2 DC DG = EN 175301-803-A
(66.5)
2.62
200 3000
150
2000
100
1000
50
3.23 Max.
(82 Max.)
0 0 gpm
0 3 6 9
l/min
0 10 20 30 35
Flow
0.43
(11)
0.08
(2.0)
Pressure
2 Code Part No Material
Rating
Weight
Operation
When de-energized the WK08D allows flow from port 3 to port 2 bi-directionally,
while blocking flow at port 1. When energized the spool shifts and opens flow
from port 2 to port 1 bi-directionally, while blocking flow at port 3.
3 1
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 5 gpm (19 l/min)
Internal Leakage 5.5 cu in/min. at 3600 psi and 158 SUS
(90 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
3 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
2 Cavity FC08-3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580086
Finisher: 02580087
Cartridge Weight 0.40 Lbs. (0.18 kg)
1 Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
Performance steel shell, polyamid encapsulation.
Measured at 158 SUS (34 cSt)
bar psi o o
Toil = 115 F (46 C) Seal Kits Buna-N FS083-N P/N: 03054795
12.1 175 Viton® FS083-V P/N: 02591059
10.3 150 2 1
Pressure Drop
8.6 125 3 2
6.9 100
5.2 75
3.4 50
1.7 25
gpm
0 0
0 1 2 3 4 5
l/min
0 3.8 7.6 11.5 15.1 19.1
Flow
0.28
(7.1)
Coil Connector
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
DL = Leadwires (2) - 18” long (46 cm)*
1.13 Thick
DW = WeatherPak™ on leadwires - 9.5” long (24 cm)*
(30)
DN = Deutsch™ DT04-2P, molded, axial (IP69K Rated)*
1 DT = Amp Junior Timer™, molded, radial mount*
0.18 2.0 AC AG = EN 175301-803-A
(4.6) (50.8)
Coil Model 40-1836
2.5 For other coil connector types consult factory
(60)
*Coils with internal diode are available, consult factory.
ø1.43
(ø36.3) Operating Limits
0.95 Measured at 158 SUS (34 cSt)
psi Toil = 115° F (46° C)
(24)
350
5000
300
4000
250
Pressure
200 3000
(70.5 Max.)
2.78 Max.
150
2000
3 2
100 2 1
0.37
(9.5)
0.08
1000
(2.0)
2 3
50 1 2
0 0 gpm
0 2 4 6
l/min
0 5 10 15 20 25 30
Flow
3
1.61
(41)
1
ø0.56
(ø14.27) Standard Line Bodies*
ø0.63 Pressure
Code Part No Material Weight
(ø15.88) Rating
Aluminum, 3500 psi 0.58 lbs
3/4-16 UNF-2A FH083-AS6 03011424
anodized (245 bar) (0.26 kg)
Steel, 6000 psi 1.7 lbs
FH083-SS6 00560920
zinc plated (420 bar) (0.77 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10D allows flow from port 2 to port 3 bi-directionally,
while blocking flow at port 1. When energized the spool shifts and opens flow
from port 2 to port 1 bi-directionally, while blocking flow at port 3.
3 1 Operation of Manual Override Option: To override, remove the coil nut, turn
the override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override option
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8.4 gpm (32 l/min)
Internal Leakage 7.3 cu in/min. at 3600 psi and 158 SUS
(120 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
3 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
2 Cavity FC10-3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580092
Finisher: 02580093
1 Cartridge Weight 0.52 Lbs. (0.24 kg)
Coil Weight 0.51 Lbs. (0.23 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Performance Buna N or Viton® o-rings.
Measured at 158 SUS (34 cSt) PTFE back-up rings.
bar psi Toil = 115°F (46°C)
15 Coil Material Class N high temperature magnet wire,
200 steel shell, polyamid encapsulation.
12.5 3 2 Seal Kits Buna-N FS103-N P/N: 03071274
175
1 2 Viton® FS103-V P/N: 03049443
150
Pressure Drop
10 2 1
125 2 3
7.5
100
5 75
50
2.5
25
0 gpm
0
0 1 2 3 4 5 6 7 8 9
l/min
0 5 10 15 20 25 30 35
Flow Rate
N = Buna-N
1” HEX V = Viton®
Torque 28-33 ft-lbs
Coil Voltage
(Torque 38-45 Nm)
0 = No coil, cartridge only
DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
(18.3)
0.72
110 = 110 VDC (only available with connector DG)
1.38
(35)
AC 24 = 24 VAC
3
(53.8)
2
(66.5)
2.62
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
DL = Leadwires (2) - 18” long (46 cm)*
DW = WeatherPak™ on leadwires - 9.5” long (24 cm)*
1.25 Thick DN = Deutsch™ DT04-2P, molded, axial (IP69K Rated)*
1 (32) DT = Amp Junior Timer™, molded, radial mount*
2.0 AC AG = DIN 175301-803
(50.8) Coil Model 50-1836
2.5 For other coil connector types consult factory
(60) *Coils with internal diode are available, consult factory.
ø1.43
(ø36.3) Operating Limits
0.95 Measured at 158 SUS (34 cSt)
(24) bar psi Toil = 115°F (46°C)
350
5000
300
1 2
4000
250 2 1
2 3
2.83 Max.
(72 Max.)
Pressure
3 2
200 3000
150
2000
0.55
(14)
100
0.08
(2.0)
1000
50
0 0 gpm
0 3 6 9
l/min
0 10 20 30 35
Flow
3
1.85
(47)
Operation
When de-energized the WK07L allows flow from port 2 to port 1 bi-directionally,
while blocking flow at port 3. When energized the spool shifts and opens flow
from port 1 to port 3 bi-directionally, while blocking flow at port 2.
3 1 Operation of Manual Override Option: To override, remove the coil nut, turn
the override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• One piece cartridge body design to maximize reliability
• Screw type manual override option
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 2.5 gpm at 5000 psi (10 l/min at 350 bar)
Internal Leakage 4.3 cu in/min. at 3000 psi and 158 SUS
(70 cc/min at 280 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
3 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
2 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC07-3 (contact HYDAC for information)
Cavity Tools Rougher: N/A
Finisher: N/A
1
Cartridge Weight 0.33 Lbs. (0.15 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Performance Buna N or Viton® o-rings.
Measured at 158 SUS (34 cSt)
bar psi Toil = 115° F (46° C)
PTFE back-up rings.
12
160 Coil Material Class N high temperature magnet wire,
3 1 steel shell, polyamid encapsulation.
10 1 2
120
Seal Kits Buna-N FS073-N P/N: Consult factory
8 Viton® FS073-V P/N: Consult factory
Pressure Drop
6 80
4
40
2
0 gpm
0
0 1 2
l/min
0 2 4 6 8 10
Flow
24 = 24 VDC
36 = 36 VDC
(63.5 Max.)
AC 24 = 24 VAC
115 = 115 VAC (AC coils internally full wave rectified)
230 = 230 VAC
5/8” HEX Coil Connector
0.08
1
ø0.43
(ø11)
ø0.50
(ø12.6)
5/8-18UNF-2A
ø0.83
(ø21)
Operation
When de-energized the WK08L allows flow from port 2 to port 1 bi-directionally,
while blocking flow at port 3. When energized the spool shifts and opens flow
from port 1 to port 3 bi-directionally, while blocking flow at port 2.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 4.5 gpm (17 l/min)
Internal Leakage 5.5 cu in/min. at 3600 psi and 158 SUS
(90 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
3 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
2 Cavity FC08-3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580086
Finisher: 02580087
Cartridge Weight 0.40 Lbs. (0.18 kg)
1 Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Performance Buna N or Viton® o-rings.
PTFE back-up rings.
Measured at 158 SUS (34 cSt)
bar psi
T Oil = 115°F (46°C) Coil Material Class N high temperature magnet wire,
200 steel shell, polyamid encapsulation.
12.5 Seal Kits Buna-N FS083-N P/N: 03054795
3 1 Viton® FS083-V P/N: 02591059
10 150
1 2
Pressure
7.5
100
5
50
2.5
0 0 gpm
0 1 2 3 4 5
l/min
0 5 10 15
Flow
Seals
(69.5 Max.)
N = Buna-N
V = Viton®
7/8” HEX
Coil Voltage
Torque 18.5-22 ft-lbs
0 = No coil, cartridge only
(Torque 25-30 Nm)
DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
(15.2)
0.60 110 = 110 VDC (only available with connector DG)
(29.7)
1.17
AC 24 = 24 VAC
3 115 = 115 VAC (AC coils internally full wave rectified)
2 230 = 230 VAC
(53.8)
(66.5)
2.12
2.62
Coil Connector
0.28
(7.1)
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
DL = Leadwires (2) - 18” long (46 cm)*
DW = WeatherPak™ on leadwires - 9.5” long (24 cm)*
1.13 Thick
DN = Deutsch™ DT04-2P, molded, axial (IP69K Rated)*
(30)
DT = Amp Junior Timer™, molded, radial mount*
1 AC AG = EN 175301-803-A
4.6 2.0
Coil Model 40-1836
(0.18) (50.8)
2.5 For other coil connector types consult factory
(60) *Coils with internal diode are available, consult factory.
ø1.43
(ø36.3)
Operating Limits
0.95 Measured at 158 SUS (34 cSt)
bar psi
(24) Toil = 115°F (46°C)
350
5000
300
4000
250
Pressure
200 3000
(70.5 Max.)
2.78 Max.
150
2000 2 1
100 3 1
1 2
1000
0.37
(9.5)
1 3
50
0.08
0 0 gpm
(2)
0 1 2 3 4 5
l/min
0 5 10 15 20
Flow
3
1.61
(41)
Operation
When de-energized the WK10L allows flow from port 2 to port 1 bi-directionally,
while blocking flow at port 3. When energized the spool shifts and opens flow
from port 1 to port 3 bi-directionally, while blocking flow at port 2.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• One piece cartridge body design to maximize reliability
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8.4 gpm (32 l/min)
Internal Leakage 6 cu in/min. at 3600 psi and 158 SUS
(100 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
3 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
2 Cavity FC10-3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580092
Finisher: 02580093
1 Cartridge Weight 0.52 Lbs. (0.24 kg)
Coil Weight 0.51 Lbs. (0.23 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Performance Buna N or Viton® o-rings.
Measured at 158 SUS (34 cSt) PTFE back-up rings.
bar psi
Toil = 115°F (46°C)
12.5 Coil Material Class N high temperature magnet wire,
175
steel shell, polyamid encapsulation.
1 3
10 150 Seal Kits Buna-N FS103-N P/N: 03071274
1 2
Viton® FS103-V P/N: 03049443
Pressure Drop
125 2 1
7.5
100
3 1
5 75
50
2.5
25
0 00 gpm
1 2 3 4 5 6 7 8 9
l/min
0 5 10 15 20 25 30 35
Flow Rate
Seals
(81.5 Max.)
N = Buna-N
V = Viton®
Coil Voltage
1” HEX
0 = No coil, cartridge only
Torque 28-33 ft-lbs
DC 12 = 12 VDC
(Torque 38-45 Nm)
24 = 24 VDC
36 = 36 VDC
(18.3) 110 = 110 VDC (only available with connector DG)
0.72
AC 24 = 24 VAC
3 115 = 115 VAC (AC coils internally full wave rectified)
1.38
(35)
Coil Connector
2 DC DG = EN 175301-803-A
(66.5)
2.62
200 3000 3 1
2 3
1 3
150
2000
100
1000
3.23 Max.
(82 Max.)
50
0 0 gpm
0 3 6 9
l/min
0 10 20 30 35
Flow
0.43
(11)
0.08
(2.0)
3
Standard Line Bodies*
1.85
(47)
Pressure
2 Code Part No Material
Rating
Weight
Operation
When de-energized the WK08A allows flow from port 2 to port 1 bi-directionally
and port 3 to port 4 bi-directionally. When energized the spool shifts and blocks
all ports.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 5 gpm at 3600 psi (19 l/min at 250 bar)
2 gpm at 5000 psi (7.6 l/min at 350 bar)
Internal Leakage 5.5 cu in/min. at 3600 psi and 158 SUS
(90 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
4 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
3 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
2 Cavity FC08-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580088
Finisher: 02580089
1 Cartridge Weight 0.42 Lbs. (0.19 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
Performance PTFE back-up rings.
Measured at 158 SUS (34 cSt)
bar psi o o
Toil = 115 F (46 C) Coil Material Class N high temperature magnet wire,
200 steel shell, polyamid encapsulation.
12.5 175 Seal Kits Buna-N FS084-N P/N: 03071272
3 4
150 2 1 Viton® FS084-V P/N: 03071273
Pressure Drop
10
125
7.5
100
5 75
50
2.5
25
0 0 gpm
0 1 2 3 4 5 6
l/min
0 5 10 15 20 19
Flow
(15.2)
DC 12 = 12 VDC
0.60 24 = 24 VDC
(29.7)
1.17
36 = 36 VDC
4
(82.5)
1.73
(44)
AC 24 = 24 VAC
3 115 = 115 VAC (AC coils internally full wave rectified)
2.84
(72)
ø1.43
(ø36.3)
0.95
(24)
(70.5 Max.)
2.78 Max.
0.37
(9.5)
0.08
(2)
3
2.13
(54)
2
Standard Line Bodies*
1 Pressure
ø0.56
Code Part No Material Weight
(ø12.7) Rating
ø0.56
(ø14.27) Aluminum, 3500 psi 0.72 lbs
ø0.63 FH084-AS6 03011404
anodized (245 bar) (0.33 kg)
(ø15.88)
3/4-16 UNF-2A Steel, 6000 psi 2.12 lbs
FH084-SS6 00563381
zinc plated (420 bar) (0.96 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10A allows flow from port 3 to port 4 bi-directionally
and port 2 to port 1 bi-directionally. When energized the spool shifts and blocks
flow at all ports.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8.4 gpm at 5000 psi (32 l/min at 350 bar)
Internal Leakage 7.3 cu in/min. at 3600 psi and 158 SUS
(120 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
4 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
3
Installation No orientation restrictions
Cavity FC10-4 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580248
Finisher: 02580249
Cartridge Weight 0.55 Lbs. (0.25 kg)
1 Coil Weight 0.51 Lbs. (0.23 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
Performance PTFE back-up rings.
Measured at 158 SUS (34 cSt)
bar psi Toil = 115°F (46°C) Coil Material Class N high temperature magnet wire,
12.5
175
steel shell, polyamid encapsulation.
3 4 Seal Kits Buna-N FS104-N P/N: 03051912
10 150
1 2 Viton® FS104-V P/N: 03071275
125 2 1
Pressure Drop
7.5
100
5 75
50
2.5
25
0 0 gpm
0 1 2 3 4 5 6 7 8 9
l/min
0 5 10 15 20 25 30 35
Flow Rate
(Torque 4 Nm)
Body & Ports
C = Cartridge only
AS8 = SAE-8 Ports, aluminum body
(83.8 Max.)
3.30 Max.
Seals
N = Buna-N
V = Viton®
1” HEX
Coil Voltage
Torque 28-33 ft-lbs
0 = No coil, cartridge only
(Torque 38-45 Nm)
DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
(18.8)
0.74
110 = 110 VDC (only available with connector DG)
(35.05)
1.38
AC 24 = 24 VAC
4 115 = 115 VAC (AC coils internally full wave rectified)
(51.3)
2.02
Coil Connector
3 DC DG = EN 175301-803-A
(82.6)
ø1.43
(ø36.3)
0.95
(24)
3.23
(82) 0.43
(11)
0.08
(2.0)
4
(63.5)
2.5
Operation
When de-energized the WK08K allows flow from port 2 to port 1 bi-directionally
and port 3 to port 4 bi-directionally. When energized the spool shifts and allows
flow from port 1 to port 3 bi-directionally , ports 2 and 4 are blocked.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 4 gpm at 3600 psi (15 l/min at 250 bar)
2 gpm at 5000 psi (7.6 l/min at 350 bar)
Internal Leakage 5 cu in/min. at 3600 psi and 158 SUS
(82 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
4 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
3 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
2 Cavity FC08-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580088
Finisher: 02580089
1 Cartridge Weight 0.42 Lbs. (0.19 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
Performance PTFE back-up rings.
Measured at 158 SUS (34 cSt)
psi Coil Material Class N high temperature magnet wire,
bar Toil = 115°F (46°C)
200 steel shell, polyamid encapsulation.
12.5
175 2 1 Seal Kits Buna-N FS084-N P/N: 03071272
3 4 Viton® FS084-V P/N: 03071273
10 150
3 1
Pressure Drop
125
7.5
100
5 75
50
2.5
25
0 0 gpm
0 1 2 3 4 5
l/min
0 5 10 15 19
Flow
C = Cartridge only
AS6 = SAE-6 Ports, aluminum body
SS6 = SAE-6 Ports, steel body
(69.5 Max.)
2.74 Max.
(15.2)
DC 12 = 12 VDC
0.60 24 = 24 VDC
(29.7)
1.17
36 = 36 VDC
4 110 = 110 VDC (only available with connector DG)
1.73
(44)
AC 24 = 24 VAC
3 115 = 115 VAC (AC coils internally full wave rectified)
2.84
(72)
DC DG = EN 175301-803-A
0.28
(7.1)
ø1.43
(ø36.3)
0.95
(24)
(70.5 Max.)
2.78 Max.
0.37
(9.5)
0.08
(2)
4
2.13
(54)
2
Standard Line Bodies*
Pressure
ø0.56 1 Code Part No Material
Rating
Weight
(ø12.7) ø0.56 Aluminum, 3500 psi 0.72 lbs
(ø14.27) FH084-AS6 03011404
ø0.63 anodized (245 bar) (0.33 kg)
(ø15.88) 3/4-16 UNF-2A Steel, 6000 psi 2.12 lbs
FH084-SS6 00563381
zinc plated (420 bar) (0.96 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10K allows flow from port 1 to port 2 bi-directionally
and from port 3 to port 4 bi-directionally. When energized the spool shifts and
allows flow from port 1 to port 3 bi-directionally , ports 2 and 4 are blocked.
3 1 Operation of Manual Override Option: To override, remove the coil nut, turn
the override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8.4 gpm at 5000 psi (32 l/min at 350 bar)
Internal Leakage 7.3 cu in/min. at 3600 psi and 158 SUS
(120 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
4 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
3 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
2 Cavity FC10-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580248
Finisher: 02580249
1 Cartridge Weight 0.55 Lbs. (0.25 kg)
Coil Weight 0.51 Lbs. (0.23 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Performance Buna N or Viton® o-rings.
Measured at 158 SUS (34 cSt) PTFE back-up rings.
psi bar Toil = 115°F (46°C)
200 14 Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
175 12 1 3
1 2 Seal Kits Buna-N FS104-N P/N: 03051912
150
10 3 1 2 1 Viton® FS104-V P/N: 03071275
3 4
Pressure Drop
125
8
100
6
75
4
50
25 2
0 gpm
0 0 1 2 3 4 5 6 7 8 9
l/min
0 5 10 15 20 25 30 35
Flow Rate
C = Cartridge only
(85.5 Max.)
3.37 Max.
V = Viton®
1” HEX
Torque 28-33 ft-lbs Coil Voltage
(Torque 38-45 Nm) 0 = No coil, cartridge only
DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
(18.8)
0.74 110 = 110 VDC (only available with connector DG)
(35.05)
AC 24 = 24 VAC
1.38
3 DC DG = EN 175301-803-A
(82.6)
3.25
ø1.43
(ø36.3)
0.95
(24)
2.83
(72)
0.55
(15)
0.08
(2)
4
(63.5)
3
2.5
Operation
When de-energized the WK10N allows flow from port 1 to port 3 bi-directionally,
ports 2 and 4 are blocked. When energized the spool shifts and allows flow from
port 1 to port 2 bi-directionally and from port 3 to port 4 bi-directionally.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8.4 gpm at 5000 psi (32 l/min at 350 bar)
Internal Leakage 7.3 cu in/min. at 3600 psi and 158 SUS
(120 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
4
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
3 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-4 (see Line Bodies & Cavities section)
2
Cavity Tools Rougher: 02580248
Finisher: 02580249
Cartridge Weight 0.55 Lbs. (0.25 kg)
1 Coil Weight 0.51 Lbs. (0.23 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
Performance PTFE back-up rings.
Measured at 158 SUS (34 cSt)
bar psi Coil Material Class N high temperature magnet wire,
12.5
Toil = 115°F (46°C) steel shell, polyamid encapsulation.
175
1 3 Seal Kits Buna-N FS104-N P/N: 03051912
10 150 Viton® FS104-V P/N: 03071275
Pressure Drop
1 2
125 3 4
7.5
100
5 75
50
2.5
25
0 0 gpm
0 1 2 3 4 5 6 7 8 9
l/min
0 5 10 15 20 25 30 35
Flow Rate
(Torque 4 Nm)
Body & Ports
C = Cartridge only
AS8 = SAE-8 Ports, aluminum body
(83.8 Max.)
3.30 Max.
Seals
N = Buna-N
V = Viton®
1” HEX
Coil Voltage
Torque 28-33 ft-lbs
0 = No coil, cartridge only
(Torque 38-45 Nm)
DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
(18.8)
0.74
110 = 110 VDC (only available with connector DG)
(35.05)
1.38
AC 24 = 24 VAC
4 115 = 115 VAC (AC coils internally full wave rectified)
(51.3)
2.02
Coil Connector
3 DC DG = EN 175301-803-A
(82.6)
ø1.43
(ø36.3)
0.95
(24)
3.23
(82) 0.43
(11)
0.08
(2.0)
4
(63.5)
2.5
Operation
When de-energized the WK08P blocks flow at ports 2 and 3, flow is allowed from
port 1 to port 4 bi-directionally. When energized the spool shifts and allows flow
from port 1 to port 2 bi-directionally and from port 3 to port 4 bi-directionally.
3 1 Operation of Manual Override Option: To override, remove the coil nut, turn
the override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 4 gpm at 3600 psi (15 l/min at 250 bar)
2 gpm at 5000 psi (7.6 l/min at 350 bar)
Internal Leakage 5.5 cu in/min. at 3600 psi and 158 SUS
(90 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
4 Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
3 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
2 Installation No orientation restrictions
Cavity FC08-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580088
Finisher: 02580089
1 Cartridge Weight 0.42 Lbs. (0.19 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Performance Zinc-plated exposed surfaces.
Measured at 158 SUS (34 cSt) Buna N or Viton® o-rings.
Toil = 115°F (46°C) PTFE back-up rings.
400 Coil Material Class N high temperature magnet wire,
25 3 4 steel shell, polyamid encapsulation.
4 1 Seal Kits Buna-N FS084-N P/N: 03071272
300
Pressure Drop
200
15
100
5
0 gpm
0 0 1 2 3 4 5 6 7
0 5 10 15 20 25 l/min
Flow Rate
(15.2)
0.60 24 = 24 VDC
(29.7)
1.17
36 = 36 VDC
4 110 = 110 VDC (only available with connector DG)
1.73
(44)
AC 24 = 24 VAC
115 = 115 VAC (AC coils internally full wave rectified)
3
2.84
(72)
DC DG = EN 175301-803-A
3.25
0.28
(7.1)
ø1.43
(ø36.3)
0.95
(24)
2.36
(60)
0.47
(12)
0.08
(2)
4
3
2.13
(54)
Operation
When de-energized the WK10P blocks flow at ports 2 and 3, flow is allowed from
port 1 to port 4 bi-directionally. When energized the spool shifts and allows flow
from port 1 to port 2 bi-directionally and from port 3 to port 4 bi-directionally.
3 1 Operation of Manual Override Option: To override, remove the coil nut, turn
the override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8.4 gpm at 5000 psi (32 l/min at 350 bar)
Internal Leakage 7.3 cu in/min. at 3600 psi and 158 SUS
(120 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
4 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
3 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
2 Cavity FC10-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580248
Finisher: 02580249
1 Cartridge Weight 0.55 Lbs. (0.25 kg)
Coil Weight 0.51 Lbs. (0.23 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Performance Buna N or Viton® o-rings.
Measured at 158 SUS (34 cSt)
bar psi Toil = 115°F (46°C)
PTFE back-up rings.
12.5
175 Coil Material Class N high temperature magnet wire,
2 1 steel shell, polyamid encapsulation.
150 1 2
10
4 1
Seal Kits Buna-N FS104-N P/N: 03051912
125
3 4 Viton® FS104-V P/N: 03071275
Pressure Drop
7.5
100
5 75
50
2.5
25
0 0 gpm
0 1 2 3 4 5 6 7 8 9
l/min
0 5 10 15 20 25 30 35
Flow Rate
C = Cartridge only
(85.5 Max.)
3.37 Max.
V = Viton®
1” HEX
Torque 28-33 ft-lbs Coil Voltage
(Torque 38-45 Nm) 0 = No coil, cartridge only
DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
(18.8)
110 = 110 VDC (only available with connector DG)
0.74
(35.05)
AC 24 = 24 VAC
1.38
(51.3)
3 DC DG = EN 175301-803-A
(82.6)
3.25
ø1.43
(ø36.3)
0.95
(24)
2.83
(72)
0.55
(15)
0.08
(2)
4
(63.5)
3
2.5
Operation
When de-energized the WK08R allows flow from port 2 to port 1 bi-directionally
and port 3 to port 4 bi-directionally. When energized the spool shifts and allows
bi-directional flow from port 1 to port 4, ports 2 and 3 are blocked.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 5 gpm at 3600 psi (19 l/min at 250 bar)
Internal Leakage 5.5 cu in/min. at 3600 psi and 158 SUS
(90 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
4
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
3 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC08-4 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580088
Finisher: 02580089
Cartridge Weight 0.42 Lbs. (0.19 kg)
1 Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
Performance PTFE back-up rings.
Measured at 158 SUS (34 cSt) Coil Material Class N high temperature magnet wire,
bar psi T Oil = 115oF (46oC) steel shell, polyamid encapsulation.
20 300
Seal Kits Buna-N FS084-N P/N: 03071272
2 1 Viton® FS084-V P/N: 03071273
250
4 1
15 1 2
200
Pressure Drop
3 4
10 150
100
5
50
0 0 gpm
0 1 2 3 4 5 6
l/min
0 5 10 15 20
Flow
(15.2)
DC 12 = 12 VDC
0.60 24 = 24 VDC
(29.7)
1.17
36 = 36 VDC
4
(82.5)
1.73
(44)
AC 24 = 24 VAC
3 115 = 115 VAC (AC coils internally full wave rectified)
2.84
(72)
200 3000 3 4
(70.5 Max.)
2.78 Max.
1 4
150
2000
100
1000
0.37
(9.5)
50
0.08
(2)
0 0 gpm
0 1 2 3 4 5
l/min
0 5 10 15 20
Flow
3
2.13
(54)
2
Standard Line Bodies*
1
ø0.56 Pressure
Code Part No Material Weight
(ø12.7) Rating
ø0.56
(ø14.27) Aluminum, 3500 psi 0.72 lbs
ø0.63 FH084-AS6 03011404
anodized (245 bar) (0.33 kg)
(ø15.88)
3/4-16 UNF-2A Steel, 6000 psi 2.12 lbs
FH084-SS6 00563381
zinc plated (420 bar) (0.96 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10R allows flow from port 3 to port 4 bi-directionally
and port 2 to port 1 bi-directionally. When energized the spool shifts and blocks
flow at ports 2 and 3, allowing the flow from port 1 to port 4 bi-directionally.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8.4 gpm at 5000 psi (32 l/min at 350 bar)
Internal Leakage 6 cu in/min. at 3600 psi and 158 SUS
(100 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
4 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
3 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-4 (see Line Bodies & Cavities section)
2
Cavity Tools Rougher: 02580248
Finisher: 02580249
Cartridge Weight 0.55 Lbs. (0.25 kg)
1 Coil Weight 0.51 Lbs. (0.23 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
Performance PTFE back-up rings.
Measured at 158 SUS (34 cSt)
bar psi Toil = 115°F (46°C) Coil Material Class N high temperature magnet wire,
12.5
175 steel shell, polyamid encapsulation.
150
1 2 Seal Kits Buna-N FS104-N P/N: 03051912
10 1 4 Viton® FS104-V P/N: 03071275
2 1
125
Pressure Drop
4 1
7.5 3 4
100
5 75
50
2.5
25
0 0 gpm
0 1 2 3 4 5 6 7 8 9
l/min
0 5 10 15 20 25 30 35
Flow Rate
(Torque 4 Nm)
Body & Ports
C = Cartridge only
AS8 = SAE-8 Ports, aluminum body
(83.8 Max.)
3.30 Max.
Seals
N = Buna-N
V = Viton®
1” HEX
Coil Voltage
Torque 28-33 ft-lbs
0 = No coil, cartridge only
(Torque 38-45 Nm)
DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
(18.8)
0.74
110 = 110 VDC (only available with connector DG)
(35.05)
1.38
AC 24 = 24 VAC
4 115 = 115 VAC (AC coils internally full wave rectified)
(51.3)
2.02
Coil Connector
3 DC DG = EN 175301-803-A
(82.6)
ø1.43
(ø36.3)
0.95
(24)
3.23
(82) 0.43
(11)
0.08
(2.0)
4
(63.5)
2.5
Operation
When de-energized the WK08X allows flow from port 2 to port 3 bi-directionally
and port 1 to port 4 bi-directionally. When energized the spool shifts and
allows flow from port 3 to port 4 bi-directionally and from port 2 to port 1 bi-
3 1 directionally.
Operation of Manual Override Option: To override, remove the coil nut, turn
the override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 4.5 gpm at 3600 psi (17 l/min at 250 bar)
Internal Leakage 5.5 cu in/min. at 3600 psi and 158 SUS
(90 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
4 Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
3 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
2 Installation No orientation restrictions
Cavity FC08-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580088
Finisher: 02580089
1
Cartridge Weight 0.42 Lbs. (0.19 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Performance Zinc-plated exposed surfaces.
Measured at 158 SUS (34 cSt) Buna N or Viton® o-rings.
bar psi Toil = 115F (46C) PTFE back-up rings.
400
Coil Material Class N high temperature magnet wire,
25
350 4 1 steel shell, polyamid encapsulation.
3 2
20 300 3 4 Seal Kits Buna-N FS084-N P/N: 03071272
Pressure Drop
N = Buna-N
Torque 18.5-22 ft-lbs V = Viton®
(Torque 25-30 Nm)
Coil Voltage
0 = No coil, cartridge only
(15.2)
DC 12 = 12 VDC
0.60 24 = 24 VDC
(29.7)
1.17
36 = 36 VDC
4 110 = 110 VDC (only available with connector DG)
1.73
(44)
AC 24 = 24 VAC
3 115 = 115 VAC (AC coils internally full wave rectified)
2.84
(72)
DC DG = EN 175301-803-A
0.28
(7.1)
ø1.43
(ø36.3)
0.95
(24)
2.36
(60)
0.47
(12)
0.08
(2)
4
3
2.13
(54)
ø0.56
1 Standard Line Bodies*
(ø12.7) Pressure
ø0.56 Code Part No Material Weight
Rating
(ø14.27)
ø0.63 Aluminum, 3500 psi 0.72 lbs
FH084-AS6 03011404
(ø15.88) anodized (245 bar) (0.33 kg)
3/4-16 UNF-2A
Steel, 6000 psi 2.12 lbs
FH084-SS6 00563381
zinc plated (420 bar) (0.96 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10X allows flow from port 2 to port 3 bi-directionally
and port 1 to port 4 bi-directionally. When energized the spool shifts and
allows flow from port 3 to port 4 bi-directionally and from port 2 to port 1 bi-
3 1 directionally.
Operation of Manual Override Option: To override, remove the coil nut, turn
the override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8.4 gpm at 5000 psi (32 l/min at 350 bar)
Internal Leakage 6 cu in/min. at 3600 psi and 158 SUS
(100 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
4
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
3 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
2 Installation No orientation restrictions
Cavity FC10-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580248
Finisher: 02580249
1
Cartridge Weight 0.55 Lbs. (0.25 kg)
Coil Weight 0.51 Lbs. (0.23 kg)
Performance Cartridge Material Steel with hardened work surfaces.
Measured at 158 SUS (34 cSt) Zinc-plated exposed surfaces.
Toil = 115°F (46°C)
Buna N or Viton® o-rings.
bar psi PTFE back-up rings.
12.5
175
Coil Material Class N high temperature magnet wire,
3 4 steel shell, polyamid encapsulation.
150
10 3 2
2 1 Seal Kits Buna-N FS104-N P/N: 03051912
Pressure Drop
125
4 1 Viton® FS104-V P/N: 03071275
7.5
100
5 75
50
2.5
25
0 0 gpm
0 1 2 3 4 5 6 7 8 9
l/min
0 5 10 15 20 25 30 35
Flow Rate
C = Cartridge only
(85.5 Max.)
3.37 Max.
V = Viton®
1” HEX
Torque 28-33 ft-lbs Coil Voltage
(Torque 38-45 Nm) 0 = No coil, cartridge only
DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
(18.8)
0.74 110 = 110 VDC (only available with connector DG)
(35.05)
AC 24 = 24 VAC
1.38
3 DC DG = EN 175301-803
(82.6)
3.25
ø1.43
(ø36.3)
0.95
(24)
2.83
(72)
0.55
(15)
0.08
(2)
4
(63.5)
3
2.5
Operation
When de-energized the WK06Y allows flow from port 2 to port 1 bi-directionally
and port 3 to port 4 bi-directionally. When energized the spool shifts and opens
flow from port 2 to port 3 bi-directionally and from port 4 to port 1
3 1
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 2 gpm (7.6 l/min)
Nominal Pressure Up to 5000 psi. (350 bar), 3000 psi (207 bar)
max on tank (port 1)
Internal Leakage 6.0 cu in/min. at 3000 psi and 135 SUS
(100 cc/min at 207 bar and 38 cSt)
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Ambient Temperature Range -20° to 140°F (-29° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw at 68°F (20°C) 984 mA at 12VDC; 492 mA at 24VDC
Min. Pull-in Current to 70% of nominal amperage
Operate Valve
Typical Response Time On: 30 to 60 ms
(Varies with Pressure and Flow) Off: 20 to 40 ms
Fluid Compatibility Mineral-Based or Synthetics
with lubricating properties.
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
4 Cavity FC06-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02582057
Finisher: 02582058
3 Cartridge Weight 3.6 oz (102 grams)
Coil Weight 3.1 oz (88 grams)
Cartridge Material Steel with hardened work surfaces.
2 Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
1 Coil Material Class N, 200°C high temperature magnet wire,
steel shell, polyester encapsulation.
Performance Seal Kits Buna-N FS064-N P/N: 02610188
Measured at 135 SUS (28 cSt) Viton® FS064-V P/N: 02610189
bar psi
Toil = 100° F (38° C)
14 200
12
150 3 2 or 3 4
10
Pressure Drop
4 1
8
2 1
100
6
4
50
2
gpm
0 0
0 1 2 3
l/min
0 3 6 9
Flow
(All model 32-1329 coils are DC. AC models require an external diode bridge
0.28
(7.1)
2.63
300
4000
(58.4) Max
2.30 Max
250
Pressure
200 3000
150
2000
100 3 2
3 4
1000 2 4
0.36
(9.1)
50 4 1
0 0 gpm
0 1 2 3 4
0.04
(1)
l/min
0 5 10 15
4 Flow
(41.7)
1.64
3
2
1
ø0.40 Standard Line Bodies*
(ø10) ø0.44 Pressure
(ø11.2) Code Part No Material Weight
ø0.47 Rating
(ø11.9) Aluminum, 3500 psi 0.43 lbs
9/16-18 UNF-2A FH064-AS4 02600462
anodized (245 bar) (0.20 kg)
Steel, 6000 psi 1.25 lbs
FH064-SS4 02600461
zinc plated (420 bar) (0.57 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK08Y allows flow from port 2 to port 1 bi-directionally
and port 3 to port 4 bi-directionally. When energized the spool shifts and opens
flow from port 2 to port 3 bi-directionally and from port 4 to port 1.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 5 gpm at 3600 psi (19 l/min at 250 bar)
Internal Leakage 5 cu in/min. at 3600 psi and 158 SUS
(82 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
4 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
3 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC08-4 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580088
Finisher: 02580089
Cartridge Weight 0.42 Lbs. (0.19 kg)
1 Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Performance Coil Material Class N high temperature magnet wire,
Measured at 158 SUS (34 cSt) steel shell, polyamid encapsulation.
bar psi Toil = 115°F (46°C)
12 175 Seal Kits Buna-N FS084-N P/N: 03071272
4 1 Viton® FS084-V P/N: 03071273
10 150
2 1
3 4
Pressure Drop
125
8 3 2
100
6
75
4
50
2 25
0 0 gpm
0 1 2 3 4 5
l/min
0 5 10 15 19
Flow
(15.2)
DC 12 = 12 VDC
0.60 24 = 24 VDC
(29.7)
1.17
36 = 36 VDC
4
(82.5)
1.73
(44)
AC 24 = 24 VAC
3 115 = 115 VAC (AC coils internally full wave rectified)
2.84
(72)
4 3
200 3000 4 1
(70.5 Max.)
2.78 Max.
1 4
3 4
150
2000 3 2
100
1000
0.37
(9.5)
50
0.08
(2)
0 0 gpm
0 1 2 3 4 5
l/min
0 5 10 15 20
Flow
3
2.13
(54)
2
Standard Line Bodies*
1
ø0.56 Pressure
Code Part No Material Weight
(ø12.7) Rating
ø0.56
(ø14.27) Aluminum, 3500 psi 0.72 lbs
ø0.63 FH084-AS6 03011404
anodized (245 bar) (0.33 kg)
(ø15.88)
3/4-16 UNF-2A Steel, 6000 psi 2.12 lbs
FH084-SS6 00563381
zinc plated (420 bar) (0.96 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10Y allows flow from port 2 to port 1 bi-directionally
and port 3 to port 4 bi-directionally. When energized the spool shifts and opens
flow from port 2 to port 3 bi-directionally and from port 4 to port 1.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8.4 gpm at 5000 psi (32 l/min at 350 bar)
Internal Leakage 7.3 cu in/min. at 3600 psi and 158 SUS
(120 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
4
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
3 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-4 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580248
Finisher: 02580249
Cartridge Weight 0.55 Lbs. (0.25 kg)
1 Coil Weight 0.51 Lbs. (0.23 kg)
Cartridge Material Steel with hardened work surfaces.
Performance Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
Measured at 158 SUS (34 cSt)
Toil = 115°F (46°C) PTFE back-up rings.
bar
Coil Material Class N high temperature magnet wire,
psi
12.5 steel shell, polyamid encapsulation.
175
3 4 Seal Kits Buna-N FS104-N P/N: 03051912
10
150 3 2 Viton® FS104-V P/N: 03071275
Pressure Drop
2 1
125 4 1
7.5
100
5 75
50
2.5
25
0 0 gpm
0 1 2 3 4 5 6 7 8 9
l/min
0 5 10 15 20 25 30 35
Flow Rate
Seals
N = Buna-N
V = Viton®
1” HEX
Torque 28-33 ft-lbs Coil Voltage
(Torque 38-45 Nm) 0 = No coil, cartridge only
DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
(18.8)
0.74
110 = 110 VDC (only available with connector DG)
(35.05)
1.38
AC 24 = 24 VAC
4 115 = 115 VAC (AC coils internally full wave rectified)
(51.3)
2.02
Coil Connector
3 DC DG = EN 175301-803-A
(82.6)
3.25
ø1.43
(ø36.3)
0.95
(24)
3.23
(82) 0.43
(11)
0.08
(2.0)
4
(63.5)
2.5
Operation
When de-energized the WK08Z blocks flow at all ports. When energized the
spool shifts and allows flow from port 1 to port 2 bi-directionally and from port 3
to port 4 bi-directionally.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 4.5 gpm at 3600 psi (17 l/min at 250 bar)
2 gpm at 5000 psi (7.6 l/min at 350 bar)
Internal Leakage 5.5 cu in/min. at 3600 psi and 158 SUS
(90 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
4 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
3 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
2 Cavity FC08-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580088
Finisher: 02580089
1 Cartridge Weight 0.42 Lbs. (0.19 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Performance Buna N or Viton® o-rings.
Measured at 158 SUS (34 cSt) PTFE back-up rings.
Toil = 115o F (46o C) Coil Material Class N high temperature magnet wire,
bar psi steel shell, polyamid encapsulation.
12 175
Seal Kits Buna-N FS084-N P/N: 03071272
10 150 3 4 Viton® FS084-V P/N: 03071273
2 1
Pressure Drop
125
8
100
6
75
4
50
2 25
0 0 gpm
0 1 2 3 4 5
l/min
0 5 10 15 19
Flow
(15.2)
DC 12 = 12 VDC
0.60 24 = 24 VDC
(29.7)
1.17
36 = 36 VDC
4
(82.5)
1.73
(44)
AC 24 = 24 VAC
3 115 = 115 VAC (AC coils internally full wave rectified)
2.84
(72)
ø1.43
(ø36.3)
0.95
(24)
(70.5 Max.)
2.78 Max.
0.37
(9.5)
0.08
(2)
3
2.13
(54)
2
Standard Line Bodies*
1
ø0.56 Pressure
Code Part No Material Weight
(ø12.7) Rating
ø0.56
(ø14.27) Aluminum, 3500 psi 0.72 lbs
ø0.63 FH084-AS6 03011404
anodized (245 bar) (0.33 kg)
(ø15.88)
3/4-16 UNF-2A Steel, 6000 psi 2.12 lbs
FH084-SS6 00563381
zinc plated (420 bar) (0.96 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10Z blocks flow at all ports. When energized the
spool shifts and allows flow from port 1 to port 2 bi-directionally and from port 3
to port 4 bi-directionally.
3 1 Operation of Manual Override Option: To override, remove the coil nut, turn
the override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8.4 gpm at 5000 psi (32 l/min at 350 bar)
Internal Leakage 6 cu in/min. at 3600 psi and 158 SUS
(100 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 90% of nominal @ 5000 psi (350 bar)
4 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
3 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
2 Cavity FC10-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580248
Finisher: 02580249
1 Cartridge Weight 0.64 Lbs. (0.29 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Performance Buna N or Viton® o-rings.
Measured at 158 SUS (34 cSt) PTFE back-up rings.
bar psi TOil = 115°F (46°C)
12.5
175 Coil Material Class N high temperature magnet wire,
3 4 steel shell, polyamid encapsulation.
150 1 2
10 Seal Kits Buna-N FS104-N P/N: 03051912
2 1
125 4 3
Viton® FS104-V P/N: 03071275
Pressure Drop
7.5
100
5 75
50
2.5
25
0 gpm
0 0 1 2 3 4 5 6 7 8 9
l/min
0 5 10 15 20 25 30 35
Flow Rate
C = Cartridge only
(85.5 Max.)
3.37 Max.
V = Viton®
1” HEX
Torque 28-33 ft-lbs Coil Voltage
(Torque 38-45 Nm) 0 = No coil, cartridge only
DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
(18.8)
0.74 110 = 110 VDC (only available with connector DG)
(35.05)
1.38
AC 24 = 24 VAC
(51.3)
Coil Connector
(72)
3 DC DG = EN 175301-803-A
(82.6)
3.25
ø1.43
(ø36.3)
0.95
(24)
2.83
(72)
0.55
(15)
0.08
(2)
4
(63.5)
3
2.5
Operation
When de-energized the WK06E blocks flow at all ports. When coil S1 is energized
the spool shifts and allows flow from port 2 to port 1 and from port 3 to port 4.
When coil S2 is energized the spool shifts and allows flow from port 4 to port 1
S1 3 1 S2 and from port 3 to port 2.
Specifications
Operating Pressure 5000 psi (350 bar), 3000 psi (210 bar) Max Port 1
Nominal Flow See Operating Limits
Internal Leakage 14.0 cu in/min. at 3000 psi and
135 SUS (230 cc/min at 207 bar and 28 cSt)
S1 Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Ambient Temperature Range -20° to 140°F (-29° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw at 68°F (20°C) 984 mA at 12VDC; 492 mA at 24VDC
Min. Pull-in Current 70% of nominal amperage
to Operate Valve
S2 Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC06-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02582057
Finisher: 02582058
4 Cartridge Weight 3.6 oz (102 grams)
Coil Weight 3.1 oz (88 grams) each (2 required)
Cartridge Material Steel with hardened work surfaces.
3 Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
2
Coil Material Class N, 200°C high temperature magnet wire,
steel shell, polyester encapsulation.
1 Seal Kits Buna-N FS064-N P/N: 02610188
Viton® FS064-V P/N: 02610189
Performance
Measured at 135 SUS (28 cSt)
bar psi Toil = 100°F (38°C)
14 200
12
150 3 2 or 3 4
10
Pressure Drop
4 1
8 2 1
100
6
4
50
2
0 0 gpm
0 1 2 3
l/min
0 1 2 3 4 5 6 7 8 9 10 11
Flow
24 = 24 VDC
4
1.34
(34)
AC 115 = 105 VDC (only available with connector DG)
230 = 205 VDC (only available with connector DG)
(54.1)
3
(66.8)
2.13
2.63
(All model 32-1329 coils are DC. AC models require an external diode bridge
2 mounted outside the coil)**
0.28
(7.1)
Coil Connector
DG = EN 175301-803-B (IP65 Rated)**
DC DL = Leadwires (2) - 18” long (46 cm) AWG18, TYPE UL 1815
1.0 Thick (IP69K Rated)*
DN = Deutsch DT04-2P intergral molded (IP69K Rated)*
1 (25.4)
Use mating plug EN 175301-803-B without diode bridge for
0.25 1.5
(6.4) DC voltages P/N 02600570
(38.1)
2.0 Use mating plug EN 175301-803-B w/diode bridge for
(50.8) AC voltages P/N 02600582
Coil Model 32-1329
For other coil connector types consult factory
ø1.13 ** Mating Plugs sold separately
0.33
(8.4)
(ø29) *Coils with internal transient suppression diode are available, consult factory.
Operating Limits
Measured at 135 SUS (28 cSt)
1.33 bar psi
Toil = 100°F (38°C)
S1 (33.8) 5000
300
4000
250
(81.5) Max
3.21 Max
Pressure
200 3000
150
2000
S2 100
3 2 4 1
0.36
(9.1)
1000 3 4 2 1
50
0 0 gpm
0 1 2 3
0 2 4 6 8 10 12 l/min
Flow gpm
0.04
(1)
4
(41.7)
1.64
3
2
Standard Line Bodies*
1 Code Part No Material
Pressure
Weight
ø0.40
Rating
(ø10) ø0.44 Aluminum, 3500 psi 0.41 lbs
ø0.47 (ø11.2) FH064-AS4 02600462
anodized (245 bar) (0.19 kg)
(ø11.9) 9/16-18 UNF-2A
Steel, 6000 psi 1.22 lbs
FH064-SS4 02600461
zinc plated (420 bar) (0.55 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
S1
S1 3 1 S2
Description
A screw-in cartridge, solenoid operated, 4-way, 3 position, direct acting, spool
type valve.
S2
Operation
When de-energized the WK08E blocks flow at all ports. When coil S1 is energized
the spool shifts and allows flow from port 1 to port 2 and from port 3 to port 4.
When coil S2 is energized the spool shifts and allows flow from port 4 to port 1
and from port 3 to port 2.
Operation of Manual Override Option: To override, twist knurled screw and
push or pull to shift spool.
Detented version - twist again after pushing/pulling to hold position.
4 Features
• Push/pull type manual override button, detented manual override option.
3 • High flow capacity
2 Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 5 gpm at 3000 psi (20 l/min@ 210 bar)
1 Internal Leakage 10 cu in/min. at 3000 psi and
Performance 158 SUS (160 cc/min at 210 bar and 34 cSt)
Measured at 135 SUS (28 cSt) Fluid Operating Temp Range -20° to 248°F (-29° to 120°C)
bar psi Toil = 100°F (38°C)
140 Ambient Temperature Range -20° to 140°F (-29° to 60°C)
8 120 3 2 Coil Duty Rating Continuous from 85% to 115% of
3 4 nominal voltage
100
6
4 1 Current Draw at 68°F (20°C) 1.5 A at 12VDC; 0.8 A at 24VDC
Pressure
80 2 1
Minimum Pull-in Current 75% of nominal amperage
4 60
Typical Response Time On: 30 to 60 ms
40 (Varies with Pressure and Flow) Off: 20 to 40 ms
2
20
Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
0 0 gpm
0 1 2 3 4 5 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
l/min
0 5 10 15 20
Flow
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Operating Limits Cavity FC08-4 (see Line Bodies & Cavities section)
Measured at 135 SUS (28 cSt)
bar psi
6000
Toil = 100°F (38°C) Cavity Tools Rougher: 02580088
400
Finisher: 02580089
5000
Cartridge Weight 0.6 lbs (0.27 kg)
300
4000
Coil Weight 2 x 0.42 lbs (2 x 0.19 kg)
Pressure
3 2
200 3000 2 4 Cartridge Material Steel with hardened work surfaces.
2000
4 1
Zinc plated solenoid tube surface.
100 Buna N or Viton® o-rings
1000 Solid thermoplastic polyester back-up rings.
0 0 Coil Material Class N high temperature magnet wire,
0 1 2 3 4 5 6 gpm
steel shell, polyamid encapsulation.
0 5 10 15 20 l/min
Seal Kits Buna-N FS084-N P/N: 03071272
Flow
Viton® FS084-V P/N: 03071273
S2
0.59 0.51
(15) (13)
ø0.91
(ø23.1)
4
2.13
(54) 3
2
Standard Line Bodies*
ø0.50 1 Code Part No Material
Pressure
Weight
Rating
(ø12.7) ø0.56
ø0.62 (ø14.2) Aluminum, 3500 psi 0.72 lb
FH084-AS6 03011404
(ø15.7) 3/4-16 UNF-2A anodized (245 bar) (0.33 kg)
Steel, 6000 psi 2.12 lb
FH084-SS6 00563381
zinc plated (420 bar) (0.96 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10E blocks flow at all ports. When coil S1 is energized
the spool shifts and allows flow from port 1 to port 2 and from port 3 to port 4.
When coil S2 is energized the spool shifts and allows flow from port 4 to port 1
S1 3 1 S2 and from port 3 to port 2.
Operation of Manual Override Option: To override, twist knurled screw and
push or pull to shift spool.
Detented version - twist again after pushing/pulling to hold position.
Features
S1 • Push/pull type manual override button, detented manual override option.
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 6 gpm at 3000 psi (23 l/min at 210 bar)
Consult factory for flow rating above 3000 psi (210 bar)
Internal Leakage 10 cu in/min. at 3000 psi and 158 SUS
S2 (160 cc/min at 210 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115% of
nominal voltage
Current Draw at 68°F (20°C) 1.5 A at 12VDC; 0.8 A at 24VDC
Minimum Pull-in Current 90% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
4 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
3
Installation No orientation restrictions
Cavity FC10-4 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580248
Finisher: 02580249
Cartridge Weight 0.64 lbs (0.29 kg)
1 Coil Weight 0.42 lbs (0.19 kg) - 2 coils required
Cartridge Material Steel with hardened work surfaces.
Performance Zinc-plated exposed surfaces.
Measured at 158 SUS (34 cSt) Buna N or Viton® o-rings.
bar psi Toil = 115° F (46° C) PTFE back-up rings.
10 140
Coil Material Class N high temperature magnet wire,
120 3 2 steel shell, polyamid encapsulation.
8 3 4
100 4 1 Seal Kits Buna-N FS104-N P/N: 03051912
Pressure Drop
6
2 1 Viton® FS104-V P/N: 03071275
80
4 60
40
2
20
0 0 gpm
0 1 2 3 4 5
l/min
0 5 10 15 20
Flow
AC 24 = 24 VAC
4 115 = 115 VAC
(82.6)
3.25
Coil Connector
3
2.83
(72)
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
DL = Leadwires (2) - 18” long (46 cm)*
2
0.28
(7.1)
ø1.43
(ø36.3) 0.95
(24)
Manual Override Options
Manual Override Options
Option MM- Non
Option - Non Detented
Detented Option A--Detented
Option A Detented
ø0.59 ø0.59
(ø15) (S1) (ø15) (S1)
(7.5)
0.3
(S2) (S2)
S1
(103.5)
4.07
(122.5)
4.82
(122.5)
4.82
S2
0.59
(15) 0.08
(2.0)
4
(63.5)
3
Pressure
Code Part No Material Weight
2 Rating
Aluminum, 3500 psi 0.72 lb
FH104-AS8 03038110
anodized (245 bar) (0.33 kg)
7/8-14 UNF-2A 1 Steel, 6000 psi 2.12 lb
FH104-SS8 03037868
zinc plated (420 bar) (0.96 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK06G allows flow from port 3 to port 1, while blocking
flow at ports 2 and 4. When coil S1 is energized the spool shifts and allows flow
from port 3 to port 2 and from port 4 to port 1. When coil S2 is energized the
S1 3 1 S2 spool shifts and allows flow from port 3 to port 4 and from port 2 to port 1.
Specifications
Operating Pressure 5000 psi (350 bar), 3000 psi (210 bar) Max Port 1
Nominal Flow See Operating Limits
Internal Leakage 11.6 cu in/min. at 3000 psi and
135 SUS (190 cc/min at 207 bar and 28 cSt)
S1 Fluid Operating Temp Range -20° to 248°F (-29° to 120°C)
Ambient Temperature Range -20° to 140°F (-29° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw at 68°F (20°C) 984 mA at 12VDC; 492 mA at 24VDC
Min. Pull-in Current 70% of nominal amperage
to Operate Valve
S2 Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC06-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02582057
4 Finisher: 02582058
Cartridge Weight 3.6 oz (102 grams)
3 Coil Weight 3.1 oz (88 grams) each (2 required)
Cartridge Material Steel with hardened work surfaces.
2 Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
1 Coil Material Class N, 200°C high temperature magnet wire,
steel shell, polyester encapsulation.
Seal Kits Buna-N FS064-N P/N: 02610188
Viton® FS064-V P/N: 02610189
Performance
Measured at 135 SUS (28 cSt)
bar psi Toil = 100°F (38°C)
14 200
12 175
150 3 4 or 3 2
10
Pressure Drop
125 2 1 or 4 1
8
3 1
100
6
75
4
50
2 25
gpm
0 0
0 0.5 1 1.5 2 2.5
l/min
0 2 4 6 8
Flow
24 = 24 VDC
1.34
(34)
4 AC 115 = 105 VDC (only available with connector DG)
(54.1)
2.13
Coil Connector
DG = EN 175301-803-B (IP65 Rated)**
DC DL = Leadwires (2) - 18” long (46 cm) AWG18, TYPE UL 1815
1.0 Thick (IP69K Rated)*
DN = Deutsch DT04-2P intergral molded (IP69K Rated)*
1 (25.4)
Use mating plug EN 175301-803-B without diode bridge for
0.25 1.5
DC voltages P/N 02600570
(6.4) (38.1)
Use mating plug EN 175301-803-B w/diode bridge for
2.0
AC voltages P/N 02600582
(50.8)
Coil Model 32-1329
ø1.13 For other coil connector types consult factory
(ø29) ** Mating Plugs sold separately
*Coils with internal transient suppression diode are available, consult factory.
(8.4)
.33
Operating Limits
Measured at 135 SUS (28 cSt)
S1 1.33 bar psi
Toil = 100°F (38°C)
350
(33.8) 5000
(81.5) Max
3.21 Max
300
4000
250
Pressure
200 3000
S2
150
2000
3 2,
100 4 1,
1000 3 4,
50 2 1
(9.1)
.36
0 0 gpm
0 1 2 3
(1.0)
l/min
.04
0 2 4 6 8 10
4 Flow
3
(41.7)
1.64
1
ø.40 Standard Line Bodies*
(ø10) Pressure
ø.44 Code Part No Material Weight
ø.47 (ø1.2) Rating
(ø11.9) Aluminum, 3500 psi 0.41 lbs
9/16-18 UNF-2A FH064-AS4 02600462
anodized (245 bar) (0.19 kg)
Steel, 6000 psi 1.22 lbs
FH064-SS4 02600461
zinc plated (420 bar) (0.55 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10G allows flow from port 3 to port 1, while blocking
flow at ports 2 and 4. When coil S1 is energized the spool shifts and allows flow
from port 3 to port 2 and from port 4 to port 1. When coil S2 is energized the
S1 3 1 S2 spool shifts and allows flow from port 3 to port 4 and from port 2 to port 1.
Operation of Manual Override Option: To override, twist knurled screw and
push or pull to shift spool.
Detented version - twist again after pushing/pulling to hold position.
Features
S1 • Push/pull type manual override button, detented manual override option.
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 6 gpm at 3000 psi (23 l/min at 210 bar)
Consult factory for flow rating above 3000 psi (210 bar)
Internal Leakage 10 cu in/min. at 3000 psi and 158 SUS
S2 (160 cc/min at 210 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115% of
nominal voltage
Current Draw at 68°F (20°C) 1.5 A at 12VDC; 0.8 A at 24VDC
Minimum Pull-in Current 90% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
4 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
3 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-4 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580248
Finisher: 02580249
Cartridge Weight 0.64 lbs (0.29 kg)
1 Coil Weight 0.42 lbs (0.19 kg) - 2 coils required
Cartridge Material Steel with hardened work surfaces.
Performance Zinc-plated exposed surfaces.
Measured at 158 SUS (34 cSt) Buna N or Viton® o-rings.
bar psi T Oil = 115oF (46oC) PTFE back-up rings.
10 150
Coil Material Class N high temperature magnet wire,
3 4
125 3 2 steel shell, polyamid encapsulation.
7.5 2 1 Seal Kits Buna-N FS104-N P/N: 03051912
100
Pressure Drop
4 1
Viton® FS104-V P/N: 03071275
3 1
5 750
50
2.5
25
0 0 gpm
0 1 2 3 4 5 6
l/min
0 5 10 15 20
Flow
AC 24 = 24 VAC
4
(51.3)
2.02
3
3.25
Coil Connector
DC DG = EN 175301-803-A
2
0.28
(7.1)
0.94
(24)
ø1.429 Manual Override Options
Manual Override Options
(ø36.3)
Option MM- Non
Option - Non Detented
Detented Option A--Detented
Option A Detented
ø0.59 ø0.59
(ø15) (S1) (ø15) (S1)
(7.5)
(S2) (S2)
0.3
S1
(103.5)
4.07
(122.5)
4.82
(122.5)
4.82
S2
0.59
(15)
0.08
(2.0)
4
(63.5)
2.5
3
Standard Line Bodies*
Pressure
2 Code Part No Material
Rating
Weight
Operation
When de-energized the WK06H allows flow to all ports. When coil S1 is energized
the spool shifts and allows flow from port 2 to port 1 and from port 3 to port 4.
When coil S2 is energized the spool shifts and allows flow from port 4 to port 1
S1 3 1 S2 and from port 3 to port 2.
Specifications
Operating Pressure 5000 psi (350 bar), 3000 psi (210 bar) Max Port 1
Nominal Flow See Operating Limits
Internal Leakage 6.0 cu in/min. at 3000 psi and
135 SUS (100 cc/min at 207 bar and 28 cSt)
Fluid Operating Temp Range -20° to 248°F (-29° to 120°C)
S1
Ambient Temperature Range -20° to 140°F (-29° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw at 68°F (20°C) 984 mA at 12VDC; 492 mA at 24VDC
Min. Pull-in Current 70% of nominal amperage
to Operate Valve
S2 Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC06-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02582057
Finisher: 02582058
4 Cartridge Weight 3.6 oz (102 grams)
Coil Weight 3.1 oz (88 grams) each (2 required)
3 Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
2 Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
Coil Material Class N, 200°C high temperature magnet wire,
1 steel shell, polyester encapsulation.
Seal Kits Buna-N FS064-N P/N: 02610188
Viton® FS064-V P/N: 02610189
Performance
Measured at 135 SUS (28 cSt)
bar psi Toil = 100° F (38°C)
14 200
3 4; S1 or 2 1; Off or 4 1; Off
12 175
2 1; S1 or 4 1; S2
150
3 1; Off
10 3 2; S2
Pressure Drop
125
8
100
6
75
4
50
2 25
gpm
0 0
0 0.5 1 1.5 2 2.5
l/min
0 2 4 6 8
Flow
DC 12 = 12 VDC
0.95
24 = 24 VDC
4
1.34
(34)
(All model 32-1329 coils are DC. AC models require an external diode bridge
2 mounted outside the coil)**
0.28
(7.1)
Coil Connector
DG = EN 175301-803-B (IP65 Rated)**
DC DL = Leadwires (2) - 18” long (46 cm) AWG18, TYPE UL 1815
1.0 Thick (IP69K Rated)*
DN = Deutsch DT04-2P intergral molded (IP69K Rated)*
1 (25.4)
Use mating plug EN 175301-803-B without diode bridge for
0.25 1.5 DC voltages P/N 02600570
(6.4) 2.0 (38.1) Use mating plug EN 175301-803-B w/diode bridge for
(50.8) AC voltages P/N 02600582
Coil Model 32-1329
For other coil connector types consult factory
ø1.13 ** Mating Plugs sold separately
0.33
(8.4)
(ø29) *Coils with internal transient suppression diode are available, consult factory.
Operating Limits
Measured at 135 SUS (28 cSt)
1.33 bar psi
S1 Toil = 100° F (38° C)
(33.8) 5000
300
4000
(81.5) Max
3.21 Max
Pressure
200 3000
2000
S2 100
1000 3 2, 4 1, 3 4, 2 1
0 gpm
0.36
(9.1)
0
0 1 2 3
l/min
0 2 4 6 8 10
Flow
0.04
(1.0)
4
(41.7)
3
1.64
2
Standard Line Bodies*
ø0.40
1 Pressure
Code Part No Material Weight
(ø10) Rating
ø0.44
ø0.47 (ø11.2) Aluminum, 3500 psi 0.41 lbs
FH064-AS4 02600462
(ø11.9) 9/16-18 UNF-2A anodized (245 bar) (0.19 kg)
Steel, 6000 psi 1.22 lbs
FH064-SS4 02600461
zinc plated (420 bar) (0.55 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10H allows flow to all ports. When coil S1 is energized
the spool shifts and allows flow from port 1 to port 2 and from port 3 to port 4.
When coil S2 is energized the spool shifts and allows flow from port 4 to port 1
S1 3 1 S2 and from port 3 to port 2.
Operation of Manual Override Option: To override, twist knurled screw and
push or pull to shift spool.
Detented version - twist again after pushing/pulling to hold position.
Features
• Push/pull type manual override button, detented manual override option.
S1
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 6 gpm at 3000 psi (23 l/min at 210 bar)
Consult factory for flow rating above 3000 psi (210 bar)
Internal Leakage 10 cu in/min. at 3000 psi and 158 SUS
S2 (160 cc/min at 210 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115% of
nominal voltage
Current Draw at 68°F (20°C) 1.5 A at 12VDC; 0.8 A at 24VDC
Minimum Pull-in Current 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
4 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
3 Installation No orientation restrictions
Cavity FC10-4 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580248
Finisher: 02580249
Cartridge Weight 0.64 lbs (0.29 kg)
1 Coil Weight 0.42 lbs (0.19 kg) - 2 coils required
Cartridge Material Steel with hardened work surfaces.
Performance Zinc-plated exposed surfaces.
Measured at 158 SUS (34 cSt) Buna N or Viton® o-rings.
bar psi T Oil = 115oF (46oC) PTFE back-up rings.
10 150
Coil Material Class N high temperature magnet wire,
3 1 0
125 2 1 0
steel shell, polyamid encapsulation.
7.5 4 1 0 Seal Kits Buna-N FS104-N P/N: 03051912
100 3 4 S1
Pressure Drop
0 0 gpm
0 1 2 3 4 5 6
l/min
0 5 10 15 20
Flow
Seals
1” HEX N = Buna-N
Torque 28-33 ft-lbs V = Viton®
(Torque 38-45 Nm)
Coil Voltage
0 = No coil, cartridge only
DC 12 = 12 VDC
(18.8) 24 = 24 VDC
0.74
36 = 36 VDC
(35.05)
4 AC 24 = 24 VAC
(82.6)
(51.3)
3.25
2.02
Coil Connector
DC DG = EN 175301-803-A
2
(7.1)
0.28
0.95
(24)
ø1.43 Manual Override Options
Manual Override Options
(ø36.3)
Option MM- Non
Option - Non Detented
Detented Option A--Detented
Option A Detented
ø0.59 ø0.59
(ø15) (S1) (ø15) (S1)
(S2) (S2)
S1
(103.5)
4.07
(122.5)
4.82
(122.5)
4.82
S2
0.59
(15)
0.08
(2.0)
4
(63.5)
2.5
3
Standard Line Bodies*
Pressure
2 Code Part No Material
Rating
Weight
Operation
When de-energized the WK06J allows flow from cylinder ports 2 and 4 to port 1,
port 3 is blocked. When coil S1 is energized the spool shifts and allows flow from
port 2 to port 1 and from port 3 to port 4. When coil S2 is energized the spool
S1 3 1 S2 shifts and allows flow from port 4 to port 1 and from port 3 to port 2.
Specifications
Operating Pressure 5000 psi (350 bar), 3000 psi (210 bar) Max Port 1
Nominal Flow See Operating Limits
Internal Leakage 11.6 cu in/min. at 3000 psi and
158 SUS (190 cc/min at 250 bar and 34 cSt)
S1 Fluid Operating Temp. Range -20° to 248°F (-29° to 120° C)
Ambient Temperature Range -20° to +140°F (-29° to +60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw at 68°F (20°C) 984 mA at 12VDC; 492 mA at 24VDC
Min. Pull-in Current 70% of nominal amperage
to Operate Valve
S2 Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC06-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02582057
Finisher: 02582058
4 Cartridge Weight 3.6 oz (102 grams)
Coil Weight 3.1 oz (88 grams) each (2 required)
3 Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
2 Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
Coil Material Class N, 200°C high temperature magnet wire,
1 steel shell, polyester encapsulation.
Seal Kits Buna-N FS064-N P/N: 02610188
Viton® FS064-V P/N: 02610189
Performance
Measured at 135 SUS (28 cSt)
bar psi Toil = 100° F (38°C)
14 200
12
150 3 2 or 3 4
10
Pressure Drop
4 1
8 2 1
100
6
4
50
2
0 0 gpm
0 1 2 3
l/min
0 1 2 3 4 5 6 7 8 9 10 11
Flow
C = Cartridge only
AS4 = SAE-4 Ports, aluminum body
SS4 = SAE-4 Ports, steel body
Seals
11/16” HEX Torque N = Buna-N
12-15 ft-lbs V = Viton®
(Torque 16-20 Nm)
Coil Voltage
0 = No coil, cartridge only
0.55
1.34 (14)
DC 12 = 12 VDC
(24.1)
0.95
24 = 24 VDC
4 AC 115 = 105 VDC (only available with connector DG)
(34)
(54.1)
3 (All model 32-1329 coils are DC. AC models require an external diode bridge
mounted outside the coil)**
2
(66.8)
2.63
0.28
(7.1)
Coil Connector
DG = EN 175301-803-B (IP65 Rated)**
DC DL = Leadwires (2) - 18” long (46 cm) AWG18, TYPE UL 1815
(IP69K Rated)*
1.0 Thick DN = Deutsch DT04-2P intergral molded (IP69K Rated)*
1 (25.4) Use mating plug EN 175301-803-B without diode bridge for
0.25 1.50 DC voltages P/N 02600570
(6.4) (38.1) Use mating plug EN 175301-803-B w/diode bridge for
2.0
(50.8) AC voltages P/N 02600582
Coil Model 32-1329
For other coil connector types consult factory
ø1.13 ** Mating Plugs sold separately
0.33
(8.4)
(ø29) *Coils with internal transient suppression diode are available, consult factory.
Operating Limits
Measured at 135 SUS (28 cSt)
1.33 bar psi
Toil = 100° F (38° C)
S1 (33.8) 350 5000
300
(81.5) Max
3.21 Max
4000
250
Pressure
200 3000
150
2000
S2 100
1000 3 2 4 1
50 3 4 2 1
0 0 gpm
0.36
(9.1)
0 1 2 3
l/min
0 2 4 6 8 10 12
Flow
0.04
(1)
4
(41.7)
1.64
3
2
Standard Line Bodies*
ø0.40
1 Pressure
Code Part No Material Weight
(ø10) Rating
ø0.44
ø0.47 (ø11.2) Aluminum, 3500 psi 0.41 lbs
FH064-AS4 02600462
(ø11.9) anodized (245 bar) (0.19 kg)
9/16-18 UNF-2A
Steel, 6000 psi 1.22 lbs
FH064-SS4 02600461
zinc plated (420 bar) (0.55 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
S1
S1 3 1 S2
Description
A screw-in cartridge, solenoid operated, 4-way, 3 position, direct acting, spool
type valve.
S2
Operation
When de-energized the WK08J allows flow from cylinder ports 2 and 4 to port 1,
port 3 is blocked. When coil S1 is energized the spool shifts and allows flow from
port 2 to port 1 and from port 3 to port 4. When coil S2 is energized the spool
shifts and allows flow from port 4 to port 1 and from port 3 to port 2.
Operation of Manual Override Option: To override, twist knurled screw and
push or pull to shift spool.
Detented version - twist again after pushing/pulling to hold position.
4
Features
• Push/pull type manual override button, detented manual override option.
3 • High flow capacity
2 Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 5 gpm at 3000 psi (20 l/min@ 210 bar)
1
Internal Leakage 10 cu in/min. at 3000 psi and
Performance 158 SUS (160 cc/min at 210 bar and 34 cSt)
Measured at 135 SUS (28 cSt)
bar psi Toil = 100°F (38°C)
Fluid Operating Temp Range -20° to 248°F (-29° to 120°C)
140
Ambient Temperature Range -20° to 140°F (-29° to 60°C)
8 120 3 2 Coil Duty Rating Continuous from 85% to 115% of
3 4 nominal voltage
100
6
4 1 Current Draw at 68°F (20°C) 1.5 A at 12VDC; 0.8 A at 24VDC
Pressure
80 2 1
Minimum Pull-in Current 75% of nominal amperage
4 60 Typical Response Time On: 30 to 60 ms
(Varies with Pressure and Flow) Off: 20 to 40 ms
40
2 Fluid Compatibility Mineral-Based or Synthetics with
20 lubricating properties
0 0
0 1 2 3 4 5
gpm Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
0 5 10 15 20
l/min Filtration 21/19/16 or cleaner per (ISO 4406)
Flow Installation No orientation restrictions
Operating Limits Cavity FC08-4 (see Line Bodies & Cavities section)
Measured at 135 SUS (28 cSt)
bar psi Toil = 100°F (38°C) Cavity Tools Rougher: 02580088
400
6000 Finisher: 02580089
5000 Cartridge Weight 0.6 lbs (0.27 kg)
300
4000 Coil Weight 2 x 0.42 lbs (2 x 0.19 kg)
Pressure
3000
3 2 Cartridge Material Steel with hardened work surfaces.
200 2 4
4 1
Zinc plated solenoid tube surface.
2000 Buna N or Viton® o-rings.
100 Solid thermoplastic polyester back-up rings.
1000
Coil Material Class N high temperature magnet wire,
0 0
0 1 2 3 4 5 6 gpm steel shell, polyamid encapsulation.
Seal Kits Buna-N FS084-N P/N: 03071272
0 5 10 15 20 l/min
Flow Viton® FS084-V P/N: 03071273
(S2) (S2)
(103.1)
(122.5)
4.06
4.82
(122.5)
4.82
S2
(12.9)
0.51
(14.9)
0.59
ø0.91
(ø23.1)
4
(54.1)
2.13
3
2
Standard Line Bodies*
ø0.50 1 Code Part No Material
Pressure
Weight
ø0.56 Rating
(ø12.7)
ø0.62 (ø14.2) Aluminum, 3500 psi 0.72 lb
FH084-AS6 03011404
(ø15.7) 3/4-16 UNF-2A anodized (245 bar) (0.33 kg)
Steel, 6000 psi 2.12 lb
FH084-SS6 00563381
zinc plated (420 bar) (0.96 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10J allows flow from cylinder ports 2 and 4 to port 1,
port 3 is blocked. When coil S1 is energized the spool shifts and allows flow from
port 1 to port 2 and from port 3 to port 4. When coil S2 is energized the spool
S1 3 1 S2 shifts and allows flow from port 4 to port 1 and from port 3 to port 2.
Operation of Manual Override Option: To override, twist knurled screw and
push or pull to shift spool.
Detented version - twist again after pushing/pulling to hold position.
Features
• Push/pull type manual override button, detented manual override option.
S1
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 6 gpm at 3000 psi (23 l/min at 210 bar)
Consult factory for flow rating above 3000 psi (210 bar)
Internal Leakage 10 cu in/min. at 3000 psi and 158 SUS
S2 (160 cc/min at 210 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115% of
nominal voltage
Current Draw at 68°F (20°C) 1.5 A at 12VDC; 0.8 A at 24VDC
Minimum Pull-in Current 90% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
4 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
3 Installation No orientation restrictions
Cavity FC10-4 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580248
Finisher: 02580249
Cartridge Weight 0.64 lbs (0.29 kg)
1 Coil Weight 0.42 lbs (0.19 kg) - 2 coils required
Cartridge Material Steel with hardened work surfaces.
Performance Zinc-plated exposed surfaces.
Measured at 158 SUS (34 cSt) Buna N or Viton® o-rings.
bar psi T Oil = 115oF (46oC) PTFE back-up rings.
10 150
Coil Material Class H high temperature magnetwire,
125 3 2 steel shell, polyamid encapsulation.
3 4
7.5 4 1 Seal Kits Buna-N FS104-N P/N: 03051912
100
Pressure Drop
50
2.5
25
0 0 gpm
0 1 2 3 4 5 6
l/min
0 5 10 15 20
Flow
AC 24 = 24 VAC
4 115 = 115 VAC
(82.6)
3.25
Coil Connector
3
2.83
(72)
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
DL = Leadwires (2) - 18” long (46 cm)*
2
0.28
(7.1)
ø1.43
(ø36.3) 0.95
(24)
Manual Override Options
Option M - Non Detented Option A - Detented
ø0.59 ø0.59
(ø15) (S1) (ø15) (S1)
(7.5)
0.3
S1 (S2) (S2)
(122.5)
4.82
(122.5)
4.82
(103.5)
4.07
S2
0.59
(15) 0.08
(2.0)
4
(63.5)
3
Pressure
Code Part No Material Weight
2 Rating
Aluminum, 3500 psi 0.72 lb
FH104-AS8 03038110
anodized (245 bar) (0.33 kg)
7/8-14 UNF-2A 1 Steel, 6000 psi 2.12 lb
FH104-SS8 03037868
zinc plated (420 bar) (0.96 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10T allows flow from cylinder ports 2 and 4 to port 1,
port 3 is blocked. When coil S1 is energized the spool shifts and allows flow from
S1 3 1 S2 port 3 to port 2 and port 4. When coil S2 is energized the spool shifts and allows
flow from port 3 to port 4 and from port 2 to port 1.
Operation of Manual Override Option: To override, twist knurled screw and
push or pull to shift spool.
Detented version - twist again after pushing/pulling to hold position.
Features
S1 • Push/pull type manual override button, detented manual override option.
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 6 gpm at 3000 psi (23 l/min at 210 bar)
Consult factory for flow rating above 3000 psi (210 bar)
S2 Internal Leakage 10 cu in/min. at 3000 psi and 158 SUS
(160 cc/min at 210 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115% of
nominal voltage
Current Draw at 68°F (20°C) 1.5 A at 12VDC; 0.8 A at 24VDC
Minimum Pull-in Current 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
4 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
3 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
2 Cavity FC10-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580248
Finisher: 02580249
1 Cartridge Weight 0.64 lbs (0.29 kg)
Coil Weight 0.42 lbs (0.19 kg) - 2 coils required
Performance Cartridge Material Steel with hardened work surfaces.
Measured at 158 SUS (34 cSt)
bar psi Toil = 115°F (46°C)
Zinc-plated exposed surfaces.
14 200 Buna N or Viton® o-rings.
PTFE back-up rings.
12 175 3 2 S2
4 1 Coil Material Class N high temperature magnet wire,
10
150 3 2 S1 steel shell, polyamid encapsulation.
3 4
125 Seal Kits Buna-N FS104-N P/N: 03051912
Pressure Drop
8
Viton® FS104-V P/N: 03071275
100
6
75
4
50
2 25
0 0 gpm
0 1 2 3 4 5 6 7 8 9
l/min
0 5 10 15 20 25 30 35
Flow Rate
AC 24 = 24 VAC
4 115 = 115 VAC
(82.6)
3.25
Coil Connector
3
2.83
(72)
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
DL = Leadwires (2) - 18” long (46 cm)*
2
0.28
(7.1)
ø1.43
(ø36.3) 0.95
(24)
Manual Override Options
Manual Override Options
Option MM- Non
Option - Non Detented
Detented Option A--Detented
Option A Detented
ø0.59 ø0.59
(ø15) (S1) (ø15) (S1)
(7.5)
0.3
(S2) (S2)
S1
(103.5)
4.07
(122.5)
4.82
(122.5)
4.82
S2
0.59
(15) 0.08
(2.0)
4
(63.5)
3
Pressure
Code Part No Material Weight
2 Rating
Aluminum, 3500 psi 0.72 lb
FH104-AS8 03038110
anodized (245 bar) (0.33 kg)
7/8-14 UNF-2A 1 Steel, 6000 psi 2.12 lb
FH104-SS8 03037868
zinc plated (420 bar) (0.96 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Features
• Hardened spool or poppet to ensure extended service life.
• All external surfaces zinc-plated
Operation
The WS08WM-01 blocks flow , leakfree, in both directions until an operator
pushes the button against the bias spring and opens the flow path between
1 port 2 to port 1 bi-directionally. The flow path will be open as long as the plastic
button is pushed down.
Features
• Both ports could be fully pressurized
• Easy to operate manually
• Spring return
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 3600 psi (250 bar)
Nominal Flow 5 gpm (20 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 3600 psi
(0.25 cc/min at 250 bar)
Required Push Force 9 to 15 Lbs (40 to 70 N)
depending on operating pressure
Fluid Operating Temp Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Fluid Compatibility Mineral-Based or synthetics with
lubricating properties.
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
2 Filtration 21/19/16 or cleaner per (ISO 4406)
Use with filter rated ß10 ≥ 200
Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580090
Finisher: 02580091
1 Cartridge Weight 0.19 lbs (0.09 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Performance Seal Kits Buna-N FS082-N P/N: 03033920
Measured at 158 SUS (34 cSt) Viton® FS082-V P/N: 03051756
bar psi Toil = 115°F (46°C)
14
200
12
2 1
1 2
10 150
Pressure Drop
8
100
6
4
50
0 0 gpm
0 1 2 3 4 5
l/min
0 5 10 15 20
Flow Rate
(18.8)
0.74
1.50
(38)
2
(50)
2.0
0.28
(7.1)
1.13 Thick
(28.7)
1
0.13 1.62
(3.3) (41.1)
2.0
(50)
0.08
(2.0)
(28)
2
1.1
1
Standard Line Bodies*
ø0.5
Pressure
(ø12.7) Code Part No Material Weight
Rating
3/4-16UNF-2A
Aluminum, 3500 psi 0.34 lbs
FH082-AS6 03011409
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lbs
FH082-SS6 00560917
zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
*Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 70 gpm (265 l/min) at 100 psi (7 bar) ∆P
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Ambient Temperature Range -20° to 248°F (-29° to 120°C)
Fluid Compatibility Mineral-Based or synthetics with
lubricating properties.
5 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FCM45-5 (see Line Bodies & Cavities section)
4 Cavity Tools Rougher: 02582020
Finisher: 02582021
Cartridge Weight 2.31 lbs (1.05 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
3 Buna N or Viton® o-rings.
PTFE back-up rings.
Seal Kits Buna-N FSM455-N P/N: 02610313
2 Viton® FSM455-V P/N: 02610314
Performance
Measured at 135 SUS (28 cSt)
bar psi TOil = 100°F (38°C)
120
8
100
6 3 2 or 3 4
Pressure Drop
80
4 60
40
2
20
0 0
0 10 20 30 40 50 60 70 80 gpm
1.26
(32)
Seals
(12.7)
0.50
N = Buna-N
5 V = Viton®
2.44
(62)
(91.9)
3.62
Bias Spring*
(181.1)
150 = 150 psi
7.13
*Consult factory for alternative bias springs.
4
(121.9)
4.80
(165.1)
6.50
3
2x ø0.406
2 (ø10.3)
(12.7)
(76.2) 2.25
4.50 (57.2)
(114.3)
ø1.98
0.67
(17)
(ø50.3)
M45 x 2.0-6f
0.27
(6.8)
5
ø1.57
4 (ø40)
(142.2)
5.60
ø1.49
3 (ø38)
2 ø1.42
(ø36)
1
ø1.34 Standard Line Bodies*
(ø34)
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 5.88 lbs
FHM455-AS20 02600747
anodized (245 bar) (2.66 kg)
Steel, 5000 psi 17.13 lbs
FHM455-SS20 02600563
zinc plated (350 bar) (7.77 kg)
All measurements in inches (mm).
*Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Features
• Wet armature construction
• Hardened operating parts to ensure minimal wear and extend service life
• One piece cartridge body design to maximize reliability
• Screen on pilot orifice to enhance safety
• Excellent stability throughout flow range
• Proportional water/weather resistant coils rated up to IP69K
• Continuous duty rated coils
• Optional coil voltages and molded-in connectors
• Air bleed screws
• All exposed cartridge surfaces zinc-plated to resist corrosion
• Industry common cavity
• Compact size
• Wide voltage range
• Cartridges are voltage interchangeable
• Low pressure drop
Operation
The PDB08P-01 blocks flow from port 1 to port 2 until sufficient pressure is
reached at port 1 to open the pilot stage by offsetting the electrically induced
2 solenoid force. The pilot stage opens and allows flow from the back of the main
piston to port 2. The resulting pressure imbalance causes the main spool to move
against the return spring and allows flow from port 1 to port 2.
Electrical current increase will increase the relief pressure setting. With no current
applied to the solenoid, the valve will relieve at approximately 75 psi.
Features
• Excellent stability throughout flow range
• 12 and 24 volt proportional waterproof coils
• Screen on pilot orifice to enhance safety
• Manual override option
Specifications
Operating Pressure 5000 psi (350 bar) max at port 2
Nominal Flow 16 gpm (60 l/min)
Maximum Pilot Flow 3.75 cu in/min. (0.5 l/min)
Relieving Pressure Ranges 75 to 870 psi (5 to 60 bar)
(0 to maximum control current) 75 to 3300 psi (5 to 230 bar)
75 to 5000 psi (5 to 350 bar)
Maximum Control Current 2.1 amps for 12VDC coil (2.2 Ohms)
1.05 amps for 24VDC coil (8.8 Ohms)
Dither Frequency 160 to 250 Hz
Hysteresis With Dither 2-4% of maximum control current
Typical Step Response Time ON: approx 50 ms, OFF: approx. 30 ms
Repeatability <= 1.5% of maximum pressure range
Reversal Span <= 2% of maximum
Response Sensitivity <= 1% of maximum control current
2 Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
1 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 18/16/13 or cleaner (per ISO 4406)
Performance Use with filter rated ß3 ≥ 200.
Measured at 158 SUS (34 cSt) Installation No orientation restrictions
TOil = 115°F (46°C)
Cavity FC08-2 (see Line Bodies & Cavities section)
125
% of Maximum Relieving Pressure
C = Cartridge only
AS6 = SAE-6 ports, aluminum body
SS6 = SAE-6 ports, steel body
(97.8)
3.85
Seals
(83.1)
N = Buna-N
3.27
V = Viton®
(86.1 Max.)
Pressure Range
87 = 75 to 870 psi (5 to 60 bar)
330 = 75 to 3300 psi (5 to 230 bar)
7/8” HEX 500 = 75 to 5000 psi (5 to 350 bar)
Torque 18.5-22 ft-lbs
(Torque 25-30 Nm) Coli Voltage
0 = No coil, cartridge only
12 = 12 VDC
(15.2)
24 = 24 VDC
0.60
Coil Connector
PG = EN 175301-803-A
(38)
1.5
5000
Torque 1.8-2.2 ft-lbs
300
(Torque 2.5-3 Nm) 4000
75 % Max. Control Current
200 3000
50 % Max. Control Current
2000
100
1000
No Control Current
3.43 (without Manual Override)
0 0 gpm
0 2 4 6 8 10 12 14
0 5 10 15 20 25 30 35 40 45 50 55 60 l/min
(98.8)
3.89
Flow
(84.1)
3.31
(87.1)
(26.3)
1.04
0.08
(2)
2 Pressure
Code Part No Material Weight
Rating
1 ø 0.50 FH082-AS6 03011409
Aluminum, 3500 psi 0.34 lb
anodized (245 bar) (0.15 kg)
(ø 12.7)
3/4-16 UNF-2A Steel, 6000 psi 1.0 lb
FH082-SS6 00560917
zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
The PDB10P-01 blocks flow from port 1 to port 2 until sufficient pressure is
reached at port 1 to open the pilot stage by offsetting the electrically induced
2 solenoid force. The pilot stage opens and allows flow from the back of the main
piston to port 2. The resulting pressure imbalance causes the main spool to move
against the return spring and allows flow from port 1 to port 2.
Electrical current increase will increase the relief pressure setting. With no current
applied to the solenoid, the valve will relieve at approximately 75 psi.
Features
• Excellent stability throughout flow range
• 12 and 24 volt proportional waterproof coils
• Screen on pilot orifice to enhance safety
• Manual override option
Specifications
Operating Pressure 5000 psi (350 bar) max at port 2
Nominal Flow 31 gpm (120 l/min)
Maximum Pilot Flow 3.75 cu in/min. (0.5 l/min)
Relieving Pressure Ranges 75 to 870 psi (5 to 60 bar)
(0 to maximum control current) 75 to 3300 psi (5 to 230 bar)
75 to 5000 psi (5 to 350 bar)
Maximum Control Current 2.1 amps for 12VDC coil (2.2 Ohms)
1.05 amps for 24VDC coil (8.8 Ohms)
Dither Frequency 160 to 250 Hz
Hysteresis With Dither 2-4% of maximum control current
Typical Step Response Time ON: approx 50 ms, OFF: approx. 30 ms
Repeatability <= 1.5% of maximum pressure range
Reversal Span <= 2% of maximum
Response Sensitivity <= 1% of maximum control current
2 Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
1 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 18/16/13 or cleaner (per ISO 4406)
Performance Use with filter rated ß3 ≥ 200.
Measured at 158 SUS (34 cSt)
TOil = 115°F (46°C)
Installation No orientation restrictions
125
Cavity FC10-2 (see Line Bodies & Cavities section)
% of Maximum Relieving Pressure
Seals
(81.1)
3.19
N = Buna-N
(84.3 Max.)
V = Viton®
Pressure Range
1” HEX 87 = 75 to 870 psi (5 to 60 bar)
Torque 33-40.5 ft-lbs 330 = 75 to 3300 psi (5 to 230 bar)
(Torque 45-55 Nm) 500 = 75 to 5000 psi (5 to 350 bar)
Coli Voltage
(18.8) 0 = No coil, cartridge only
0.74
12 = 12 VDC
24 = 24 VDC
(38.1)
1.5
Coil Connector
0.28
(7.1)
2 PG = EN 175301-803-A
2.13
(55)
3000
200 75 % Max. Control Current
2000
100
1000
3.34 (without Manual Override)
No Control Current
0 0 gpm
(94.6)
3.72
0 5 10 15 20 25 30
l/min
0 20 40 60 80 100 120
(81.6)
3.21
Flow
(84.8)
0.95
0.08
(2)
(2)
1.30
(33)
2
Standard Line Bodies*
Pressure
ø 0.63
1 Code Part No Material
Rating
Weight
Operation
The PDB12P-01 blocks flow from port 1 to port 2 until sufficient pressure is
reached at port 1 to open the pilot stage by offsetting the electrically induced
2 solenoid force. The pilot stage opens and allows flow from the back of the main
piston to port 2. The resulting pressure imbalance causes the main spool to move
against the return spring and allows flow from port 1 to port 2.
Electrical current increase will increase the relief pressure setting. With no current
applied to the solenoid, the valve will relieve at approximately 25 psi.
Features
• Excellent stability throughout flow range
• 12 and 24 volt proportional waterproof coils
• Screen on pilot orifice to enhance safety
• Manual override option
Specifications
Operating Pressure 5000 psi (350 bar) max at port 2
Nominal Flow 53 gpm (200 l/min)
Maximum Pilot Flow 3.75 cu in/min. (0.5 l/min)
Relieving Pressure Ranges 75 to 870 psi (5 to 60 bar)
(0 to maximum control current) 75 to 3300 psi (5 to 230 bar)
75 to 5000 psi (5 to 350 bar)
Maximum Control Current 2.1 amps for 12VDC coil (2.2 Ohms)
1.05 amps for 24VDC coil (8.8 Ohms)
Dither Frequency 160 to 250 Hz
Hysteresis With Dither 2-4% of maximum control current
Typical Step Response Time ON: approx 50 ms, OFF: approx. 30 ms
Repeatability <= 1.5% of maximum pressure range
Reversal Span <= 2% of maximum
2 Response Sensitivity <= 1% of maximum control current
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
1 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 18/16/13 or cleaner (per ISO 4406)
Performance Use with filter rated ß3 ≥ 200.
Measured at 158 SUS (34 cSt)
Installation No orientation restrictions
TOil = 115°F (46°C)
125 Cavity FC12-2 (see Line Bodies & Cavities section)
% of Maximum Relieving Pressure
(Torque 4 Nm)
Body & Ports
C = Cartridge only
AS12 = SAE-12 ports, aluminum body
(88.3)
3.48
Seals
2.9
N = Buna-N
(76.6 Max.)
(26.55)
1.05
0 = No coil, cartridge only
12 = 12 VDC
24 = 24 VDC
(57.2)
2.25
2 Coil Connector
PG = DIN 175301-803
(76.5)
0.34
(8.6)
3
2000
50% Max. Control Current
2.06 (without Manual Override)
100
1000
No Control Current
(89.3)
3.52
0 0 gpm
0 10 20 30 40 50
l/min
0 20 40 60 80 100 120 140 160 180 200
Flow
(77.6)
(16.8)
0.08
0.66
(2)
1.81
(46)
Operation
The PDB16P-01 blocks flow from port 1 to port 2 until sufficient pressure is
reached at port 1 to open the pilot stage by offsetting the electrically induced
2 solenoid force. The pilot stage opens and allows flow from the back of the main
piston to port 2. The resulting pressure imbalance causes the main spool to move
against the return spring and allows flow from port 1 to port 2.
Electrical current increase will increase the relief pressure setting. With no current
applied to the solenoid, the valve will relieve at approximately 90 psi.
Features
• Excellent stability throughout flow range
• 12 and 24 volt proportional waterproof coils
• Screen on pilot orifice to enhance safety
• Manual override option
Specifications
Operating Pressure 5000 psi (350 bar) max at port 2
Nominal Flow 79 gpm (300 l/min)
Maximum Pilot Flow 3.75 cu in/min. (0.5 l/min)
Relieving Pressure Ranges 90 to 870 psi (6 to 60 bar)
(0 to maximum control current) 90 to 3300 psi (6 to 230 bar)
90 to 5000 psi (6 to 350 bar)
Maximum Control Current 2.1 amps for 12VDC coil (2.2 Ohms)
1.05 amps for 24VDC coil (8.8 Ohms)
Dither Frequency 160 to 250 Hz
Hysteresis With Dither 2-4% of maximum control current
Typical Step Response Time ON: approx 50 ms, OFF: approx. 30 ms
Repeatability <= 1.5% of maximum pressure range
Reversal Span <= 2% of maximum
2 Response Sensitivity <= 1% of maximum control current
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
1 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 18/16/13 or cleaner (per ISO 4406)
Performance Use with filter rated ß3 ≥ 200.
Measured at 158 SUS (34 cSt)
Installation No orientation restrictions
TOil = 115°F (46°C)
125 Cavity FC16-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580251
% of Maximum Relieving Pressure
(87.1)
Seals
3.43
N = Buna-N
V = Viton®
(90.17 Max.)
Pressure Range
1 1/2” HEX 87 = 90 to 870 psi (6 to 60 bar)
Torque 96-133 ft-lbs 330 = 90 to 3300 psi (6 to 230 bar)
(Torque 130-180 Nm) 500 = 90 to 5000 psi (6 to 350 bar)
Coli Voltage
0 = No coil, cartridge only
(25.1)
0.99 12 = 12 VDC
24 = 24 VDC
Coil Connector
(57.2)
2.25
PG = EN 175301-803-A
2 PL = Leadwires (2) - 18” long (46 cm)
(76.5)
3.0
2000
3.57 (without Manual Override)
0 gpm
4.03
0 0 10 20 30 40 50 60 70 80
l/min
0 50 100 150 200 250 300
Flow
(90.6)
(29.8)
1.17
0.08
(2.0) (47.5)
1.87
1 Operation
When de-energized the PDR08-01 allows flow from port 1 (reduced pressure
port) to port 3 (tank). Port 2 (inlet) is blocked. When current signal is applied,
the solenoid armature moves the control spool and sets the control (reduced)
pressure at port 1. Increasing the current applied will increase the reduced
pressure proportionally. Port 3 is vented to tank. Back pressure on port 3 is
directly additive to the pressure setting.
Specifications
Operating Pressure 5000 psi (350 bar) max at port 2
Nominal Flow 3 gpm (12 l/min)
Flow Path De-energized: Free flow, 1 to 3
Energized: Reduced, 2 to 1; Relieving, 1 to 3
Internal Leakage 3.75 cu in/min. at 5000 psi and 158 SUS
(55 cc/min at 350 bar and 34 cSt)
Reducing/Relieving 0 to 200 psi (0 to 14 bar)
Pressure Ranges 0 to 300 psi (0 to 20 bar)
(0 to maximum control current) 0 to 500 psi (0 to 35 bar)
0 to 700 psi (0 to 48 bar)
0 to 1100 psi (0 to 75 bar)
0 to 2000 psi (0 to 138 bar)
Maximum Control Current 2.1 amps for 12VDC coil (2.2 Ohms)
1.05 amps for 24VDC coil (8.8 Ohms)
Dither Frequency 160 to 250 Hz
3 Hysteresis With Dither 2-4% of maximum control current
Typical Step Response Time ON: approx 40 ms, OFF: approx. 30 ms
Repeatability <= 2% of maximum pressure range
2 Reversal Span <= 2% of maximum
Response Sensitivity <= 1% of maximum control current
Ambient Temperature Range -4° to 140°F (-20° to +60°C)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
1 (Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Performance Filtration 21/19/16 or cleaner (per ISO 4406).
Measured at 158 SUS (34 cSt) Use with filter rated ß3 ≥ 200.
Toil = 115°F (46°C)
125 Installation No orientation restrictions
Cavity FC08-3 (see Line Bodies & Cavities section)
100 Cavity Tools Rougher: 02580086
Regulating Pressure
Finisher: 02580087
% of Maximum
C = Cartridge only
AS6 = SAE-6 ports, aluminum body
7/8” HEX
SS6 = SAE-6 ports, steel body
Torque 18.5-22 ft-lbs
Torque 25-30 Nm Seals
N = Buna-N
V = Viton®
(15.2)
0.6
Pressure Range
1.18
(30)
0.28
(7.1)
2.62
Performance
(82.6)
3.25
Pressure Drop 2 to 1
Body only
15
80
10 60
0.08
(2.0)
3
(41.2)
1.62
40
5
2 20
0 0 gpm
0 1 2 3
1 ø0.56 0 3 6 9 12
l/min
(ø14.27) Flow Rate
ø 0.62 bar
psi
(ø 15.88) 20
3/4-16 UNF-2A 100% Control Current
75% Control Current
250 50% Control Current
Regulating Pressure
No Control Current
15
All measurements in inches (mm).
200
Subject to technical modifications
150
Standard Line Bodies* 10
Pressure 100
Code Part No Material Weight
Rating 5
50
Aluminum, 3500 psi 0.58 lb
FH083-AS6 03011424
anodized (245 bar) (0.26 kg) gpm
0 0
-3 -2 -1 0 1 2 3
Steel, 6000 psi 1.70 lb
FH083-SS6 00560920 -12 -6 0 6 12
l/min
zinc plated (420 bar) (0.77 kg)
Relieving Reducing
*Please refer to Line Bodies & Cavities section for details Flow Rate
1
Operation
The PDR08P-01 allows flow from port 2 to port 1 until sufficient pressure is
reached at port 1 to open the pilot section by offsetting the electrically induced
solenoid force. Increasing electrical current will increase the control (reduced)
pressure at port 1. Any pressure on port 3 is additive to the pressure setting.
With no current applied to the solenoid, the valve will maintain pressure at
approximately 75 psi, regardless of the pressure at port 2.
Features
• Screen on pilot orifice to enhance safety
• 12 and 24 volt proportional waterproof coils
• Manual override option
Specifications
Operating Pressure 5000 psi (350 bar) max at port 2
Nominal Flow 16 gpm (60 l/min)
Flow Path De-energized: 1 to 2 & 2 to 1
Energized: 2 to 1; Relieving: 1 to 3
Maximum Pilot Flow 3.75 cu in/min. at 5000 psi
(0.5 l/min at 350 bar)
Reducing/Relieving 75 to 870 psi (5 to 60 bar)
Pressure Ranges 75 to 3300 psi (5 to 230 bar)
(0 to maximum control current) 75 to 5500 psi (5 to 350 bar)
Maximum Control Current 2.1 amps for 12VDC coil (2.2 Ohms)
1.05 amps for 24VDC coil (8.8 Ohms)
3 Dither Frequency 160 to 250 Hz
Hysteresis With Dither 2-4% of maximum control current
Typical Step Response Time ON: approx 60 ms, OFF: approx. 40 ms
2 Repeatability <= 1.5% of maximum pressure range
Reversal Span <= 2% of maximum
Response Sensitivity <= 1% of maximum control current
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
1 Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Performance Filtration 18/16/13 or cleaner (per ISO 4406)
Measured at 158 SUS (34 cSt) Use with filter rated ß3 ≥ 200.
Toil = 115°F (46°C) Installation No orientation restrictions
125
Cavity FC08-3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580086
Regulating Pressure
(15.2)
0.60
87 = 75 to 870 psi (5 to 60 bar)
1.18
(30)
Coli Voltage
(66.2)
2.62
1.13 Thick
(30) 12 = 12 VDC
24 = 24 VDC
Coil Connector
PG = EN 175301-803-A
1 2.0
PL = Leadwires (2) - 18” long (46 cm)
PN = Deutsch™ DT04-2P, molded, axial (IP69K Rated)
(50.8) PT = Amp Junior Timer™, molded, radial mount
2.5
(60) Coil Resistance
2.2 = 2.2 Ohms (12 VDC)
Manual Override 8.8 = 8.8 Ohms (24 VDC)
(Emergency pressure adjustment)
Torque 7.4-8.1 ft-lbs Coil Model P-40-1836
(Torque 10-11 Nm) Air Bleed screw For other coil connector types consult factory
Torque 1.8-2.2 ft-lbs
(Torque 2.5-3 Nm)
Performance
Measured at 158 SUS (34 cSt)
3.39 (without Manual Override)
bar
psi Toil = 115°F (46°C)
40
(99.8)
3.93
30
400
20 300
(86)
(27.2)
200
1.07
0.08
(2)
10
100
0 0 gpm
3 0 5 10 15
(40.7)
1.60
15 30 l/min
0 45 60
2 Flow Rate
psi bar
350
1
5000
300
ø 0.56
Regulating Pressure
1000 50
Standard Line Bodies* 0 0
No Control Current
gpm
-20 -15 -10 -5 0 5 10 15 20
Pressure l/min
Code Part No Material Weight -80 -60 -40 -20 0 20 40 60 80
Rating Relieving Reducing
Flow rate
Aluminum, 3500 psi 0.58 lb
FH083-AS6 03011424
anodized (245 bar) (0.26 kg)
Steel, 6000 psi 1.70 lb
FH083-SS6 00560920
zinc plated (420 bar) (0.77 kg)
*Please refer to Line Bodies & Cavities section for details
1
Operation
The PDR10P-01 allows flow from port 2 to port 1 until sufficient pressure is
reached at port 1 to open the pilot section by offsetting the electrically induced
solenoid force. Increasing electrical current will increase the control (reduced)
pressure at port 1. Any pressure on port 3 is additive to the pressure setting.
With no current applied to the solenoid, the valve will maintain pressure at
approximately 90 psi, regardless of the pressure at port 2.
Features
• Screen on pilot orifice to enhance safety
• 12 and 24 volt proportional waterproof coils
• Manual override option
Specifications
Operating Pressure 5000 psi (350 bar) max at port 2
Nominal Flow 21 gpm (80 l/min)
De-energized: 1 to 2 & 2 to 1
Flow Path
Energized: 2 to 1; Relieving: 1 to 3
3.75 cu in/min. at 5000 psi
Maximum Pilot Flow
(0.5 l/min at 350 bar)
90 to 870 psi (6 to 60 bar)
Reducing/Relieving
90 to 2600 psi (6 to 180 bar)
Pressure Ranges
90 to 3300 psi (6 to 230 bar)
(0 to maximum control current)
90 to 5000 psi (6 to 350 bar)
2.1 amps for 12VDC coil (2.2 Ohms)
Maximum Control Current
3 1.05 amps for 24VDC coil (8.8 Ohms)
Dither Frequency 160 to 250 Hz
Hysteresis With Dither 2-4% of maximum control current
Typical Step Response Time ON: approx 60 ms, OFF: approx. 40 ms
2 Repeatability <= 1.5% of maximum pressure range
Reversal Span <= 2% of maximum
Response Sensitivity <= 1% of maximum control current
Ambient Temperature Range -4° to 140°F (-20° to +60°C)
1 -4° to 248°F (-20° to +120°C)
Fluid Operating Temp. Range
(Consult factory for usage at temp. outside range.)
Mineral-based or synthetics with
Fluid Compatibility
lubricating properties
Performance Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
18/16/13 or cleaner (per ISO 4406)
Measured at 158 SUS (34 cSt) Filtration
Use with filter rated ß3 ≥ 200.
Toil = 115°F (46°C)
125 Installation No orientation restrictions
Cavity FC10-3 (see Line Bodies & Cavities section)
Rougher: 02580092
Cavity Tools
Regulating Pressure
100
Finisher: 02580093
% of Maximum
C = Cartridge only
AS8 = SAE-8 ports, aluminum body
(80.6)
3.17
Seals
1” HEX N = Buna-N
Torque 29.5-37 ft-lbs V = Viton®
(Torque 40-50 Nm)
Pressure Range
87 = 90 to 870 psi (6 to 60 bar)
18.3
(.72)
260 = 90 to 2600 psi (6 to 180 bar)
1.38
(35)
2 Coli Voltage
(66.5)
2.62
12 = 12 VDC
24 = 24 VDC
Coil Connector
1.25 Thick PG = EN 175301-803-A
0.20 2.0 1 (32) PL = Leadwires (2) - 18” long (46 cm)
(5) (50.8) PN = Deutsch™ DT04-2P, molded, axial (IP69K Rated)
2.5 PT = Amp Junior Timer™, molded, radial mount
(60)
Manual Override Coil Resistance
(Emergency pressure adjustment) 2.2 = 2.2 Ohms (12 VDC)
Torque 7.4-8.1 ft-lbs ø1.43 8.8 = 8.8 Ohms (24 VDC)
(Torque 10-11 Nm) (ø36.3) Coil Model P-40-1836
0.95 Air Bleed Screw
(24) For other coil connector types consult factory
Torque 1.8-2.2 ft-lbs
(Torque 2.5-3 Nm)
Performance
3.32 (withoit Manual Override)
(81.1)
3.19
50 700
40 Cartridge only
Pressure Drop
400
0.08
(2)
20 300
200
10
100
3 0 0 gpm
0 5 10 15 20
1.85
(47)
l/min
0 10 20 30 40 50 60 70 80
3 Flow
Features
• Built in suction and outlet checks provide for compact device in one cavity
• Heavy duty construction
• Handle rotates 360 deg
• All external cartridge surfaces zinc plated to resist corrosion
• Industry common cavity
Operation
The MP10-01 provides hydraulic flow up to 0.45 cu. in. (7.5 cc) per stroke, at
3000 psi (207 bar). Internal suction and outlet checks provide a compact device.
See performance Chart for handle torque requirements.
1
Features
• Hardened parts for long life
• Heavy duty construction
• Handle rotates 350°
• Push linkage standard
• All external surfaces zinc-plated
• Industry common cavity
• Handle socket sized for 1/2” (0.840 O.D.) pipe
• Arc angle 45°
Specifications
Operating Pressure 3000 psi (207 bar)
Nominal Flow per 45° Stroke 0.46 cubic inches (7.5cc)
Leakage 5 drops per minute (Outlet Check)
Suction Pressure 11 in. Hg (5.4 psi) less than
atmospheric pressure
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC10-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580274
Finisher: 02580247
Cartridge Weight 1.75 lbs (0.80 kg)
2 Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
1
Seal Kits Buna-N FS102-N P/N: 03033872
Viton® FS102-V P/N: 03051757
Performance
bar psi
3000
200
2500
150
2000
Pressure
100 1500
1000
50
500
0 0 Ft-lbs
0 20 40 60 80 100 120
Nm
0 20 40 60 80 100 120 140 160
1.25” HEX
Torque 30-35 ft-lbs
(40-47 Nm)
2.91
(73.9)
Inside ø 0.88
(22.2)
(122.9)
4.84
1.25 HEX.
(31.8)
ø1.63
(ø41.3)
(32.1)
1.27
2
1.52
(38.6)
Standard Line Bodies*
1 Pressure
ø0.62 Code Part No Material Weight
Rating
(ø15.7)
7/8-14 UNF-2A Aluminum, 3500 psi 0.40 lb
FH102-AS8 03037778
ø1.06 anodized (245 bar) (0.18 kg)
(ø26.9) Steel, 6000 psi 1.16 lb
FH102-SS8 03037612
zinc plated (420 bar) (0.53 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
The MP10-02 provides hydraulic flow up to 0.45 cu. in. (7.5 cc) per stroke, at
3000 psi (207 bar). Internal suction and outlet checks provide a compact device.
See performance Chart for handle torque requirements.
1
Features
• Hardened parts for long life
• Heavy duty construction
• Handle rotates 360° and can be fixed
• Push linkage standard
• Optional collar to bolt mount to the block for orientation
• All external surfaces zinc-plated
• Industry common cavity
• Arc angle 45°
• Handle socket sized for 1/2” (0.840 O.D.) pipe
Specifications
Operating Pressure 3000 psi (207 bar)
Nominal Flow per 45° Stroke 0.46 cubic inches (7.5cc)
Leakage 5 drops per minute (Outlet Check)
Suction Pressure 11 in. Hg (5.4 psi) less than
atmospheric pressure
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC10-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580274
Finisher: 02580247
2 Cartridge Weight 1.80 lbs (0.82 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
1 Solid thermoplastic polyester back-up rings.
Seal Kits Buna-N FS102-N P/N: 03033872
Viton® FS102-V P/N: 03051757
Performance
bar psi
3000
200
2500
150
2000
Pressure
100 1500
1000
50
500
0 0 Ft-lbs
0 20 40 60 80 100 120
Nm
0 20 40 60 80 100 120 140 160
0.74
1.250 Thick 2 (18.8)
(32) 1.50
(38.1)
2.17
0.28 (55)
(7.1) 0.28
(7.1)
0.87
(22) 1.77
1
0.20
(5) (45)
2.17
(55)
0.83
(21)
1.34
(34)
2 X ø 0.26
(6.5)
2.91
(73.9)
Inside ø0.88
(ø22.2)
4.84
(122.9)
2.45
(62.2)
0.04
(1)
1.27
(32.1) 2
Standard Line Bodies*
1.52
Pressure
(38.6) Code Part No Material Weight
ø0.62
1 Rating
1.38
require protection from high voltage surges in some electrical
(35)
circuits containing highly inductive or capacitive components.
These include certain types of motors, solenoids, relays and
transformers.
• AC voltage transient surges over 600 volts may require a voltage
surge suppressor (MOV varistor) to be placed in parallel to the
coil, as shown on the surge suppressor circuit diagram below.
Suggested Varistor
Voltage Joule Rating
1.14
(29)
Part No.*
115 150LA10A 45
230 250LA40A 130
*Available from electronics supplier
1.14
AC Voltage Diode Bridge Rectification (29)
Circuit Diagram
EN 175301-803-A
Part Number: 00394287
All measurements in inches (mm).
Varistor
Coil
• B
i-directional suppression diode protects coil winding from
induction voltages
1.05 1.41
1.05 (26.6)
(26.6)
(35.7)
(ø36.3)
1.43
(ø36.3)
(ø36.3)
ø1.43
ø1.43
18 lead length
(457)
(40.3)
1.59
(33.7)
1.33
(40.3)
1.59
(40.3)
1.59
(19.1)
0.75
1.05
1.05 (26.6)
(26.6) 1.05 0.51
(26.6) (13)
(ø36.3)
ø1.43
(ø 36.3)
(ø36.3)
ø1.43
ø1.43
19
(482)
(40.3)
1.59
0.43
(11)
(40.3)
1.59
(40.3)
1.59
(19.1)
0.75
1.28
1.05 (32.6) 1.41
(26.6) (35.7)
(ø36.3)
ø1.43
(ø36.3)
(ø36.3)
ø1.43
ø1.43
18 lead length
(457)
(50.3)
(50.3)
1.98
1.98
(50.3)
1.98
(33.7)
1.33
(19.1)
0.75
1.28
1.05 1.05 0.51 (32.6)
(26.6) (26.6) (13)
(ø36.3)
ø1.43
(ø36.3)
ø1.43
(ø36.3)
ø1.43
19
(482)
(50.3)
1.98
(50.3)
1.98
0,43
(11)
(50.3)
1.98
(19.1)
0.75
1.60
(40.6)
250 VAC
INPUT VARISTOR
AC +
Voltage
1.26
(32)
OUTPUT
to Coil
M3x.5 -
0.217 GROUND
0.394
(10)
(5.5)
Part Number: 02600582
0.819
(20.8)
0.354
(9)
1.13
(28.6)
Type: EN 175301-803-B
Part Number: 02600570 - without diode bridge; use with DC Coils
Part Number: 02600582 - with diode bridge; use for applying
AC input to DC coils
All measurements in inches (mm).
1.33
ø0.51 (33.8)
(ø12.9)
ø1.13
(ø29)
0.945
(24)
ø1.13
(ø29)
ø.51
(ø12.9)
0.394
(10)
1.26
(32)
(27.7)
1.09
1.26
(32)
DL-32-1329
18
(457)
ø1.13
(ø29)
1.26
(32)
Dual Leads
All measurements in inches (mm).
Cavities
Cavity drawings are provided as a tool for HYDAC customers who desire to produce their own custom manifolds. Manufacturing to the drawings
enclosed ensures correct cavity fit and proper cartridge function at maximum performance limits.
Line Bodies
HYDAC line bodies provide a cost effective method for compact, easy installation of any HYDAC cartridge. Using authentic HYDAC bodies - with
each cavity and port machined to our own exacting standards - ensures safe, high-performance function of cartridge valves plumbed “in-line.”
Standard line bodies are available for each cavity size in both clear anodized aluminum (3500 psi max. pressure) or clear zinc-plated steel
(6000 psi max. pressure) are offered with SAE O-ring boss ports. When ordering alternate port configurations, please contact the factory for
pricing and availability information.
1 Port 2 G 1.5 (38.1) 1.62 (41.1) 1.75 (45) 2.559 (65) 2.559 (65)
F G H 0.28 (7.1) 0.28 (7.1) 0.28 (7.1) 0.339 (8.6) 0.339 (8.6)
C J 0.55 (14.0) 0.61 (15.5) 0.74 (18.8) 0.989 (25.1) 0.989 (25.13)
dimensions are in inches (mm)
A
Port 1
FC**-3 Cavity
B FH06-3 FH08-3 FH10-3 FH10-S3 FH12-3
A 1.0 (25.4) 1.13 (30)* 1.25 (32)* 1.25 (30) 2.0 (50)*
Port 3 B 1.0 (25.4) 1.25 (30) 1.16 (29.5) 1.25 (30) 2.0 (50)
C 2.0 (50.8) 2.5 (60)* 2.5 (60)* 2.50 (60) 4 (100)*
K
D 2.25 ( 57.2) 2.62 (66.5) 2.62 (66.5) 2.75 (69.9) 4.02 (102)
J E 3 E 1.75 (44.5) 2.12 (53.8) 2.12 (53.8) 2.25 (57.2) 3.39 (86)
D 2 F 0.25 ( 6.4) 0.18 (4.6) 0.197 (5) 0.25 (6.4) 0.197 (5)
H
G 1.5 ( 38.1) 2 (50.8) 2 (50.8) 2.00 (50.8) 3.54 (90)
Port 2 1 H 0.28 ( 7.1) 0.28 (7.1) 0.28 (7.1) 0.282 (7.16) 0.34 (8.6)
F G J 0.95 ( 24.1) 1.17 (29.7) 1.38 (35) 1.248 (31.70) 2.14 (54.4)
C
K 0.55 ( 14.0) 0.60 (15.2) 0.72 (18.3) 0.582 (14.78) 1.17 (29.75)
A
FH16-S3 FH16-3
A 2.00 (50.8) 2 (50)*
Port 1 B 2.00 (50.8) 2.5 (50.8)
C 3.50 (88.9) 4 (100)*
D 3.50 (88.9) 4.02 (102)
E 2.875 (73.03) 3.39 (86)
F 0.23 (5.8) 0.197 (5)
G 3.04 (77.22) 3.54 (90)
H 0.34 (8.6) 0.34 (8.6)
J 1.506 (38.25) 2.18 (55.4)
K 0.695 (17.65) 1.02 (25.9)
dimensions are in inches (mm)
*Note: Dimensions determined by manufacturing location (USA or Europe)
B FC**-4 Cavity
FH06-4 FH08-4 FH10-4 FH12-4 FH16-4
A 1.0 (25.4) 1.13 (30)* 1.25 (32)* 2.0 (50)* 2.0 (50)*
Port 4 B 1.0 (25.4) 1.25 (31.75) 1.16 (29.5) 2.0 (50)* 2.0 (50)*
L C 2.0 (50.8) 2.5 (60)* 2.5 (60)* 4 (100)* 4 (100)*
K
D 2.63 (66.8) 3.25 (82.5) 3.25 (82.6) 5.2 (132) 5.2 (132)
4
E J E 2.13 (54.1) 2.83 (72) 2.83 (72) 4.49 (114) 4.49 (114)
3
D F 0.25 (6.4) .18 (4.6) .18 (4.6) .197 (5) .197 (5)
2
H G 1.5 (38.1) 2 (50.8) 2 (50.8) 3.54 (90) 3.54 (90)
Port 3
H 0.28 (7.1) .28 (7.1) .28 (7.1) .34 (8.6) .34 (8.6)
1 Port 2
F G J 1.34 (34.0) 1.73 (44) 2.02 (51.3) 3.1 (78.8) 3.24 (82.25)
C K 0.95 (24.1) 1.17 (29.7) 1.38 (35.05) 2.14 (54.4) 2.18 (55.4)
L 0.55 (14.0) .60 (15.2) .74 (18.8) 1.17 (29.75) 1.02 (25.9)
A
dimensions are in inches (mm)
Port 1
r .001 (0.025) A
ø12.75 (ø0.502) .039 (1) ø0.502 (12.75)
0.025 (0.001) A r .001 (0.025) A
12°
Ra1.6 12°
22.50 min (0.886 min)
63 (Ra1,6)
16.10 (0.634)
21.50 (0.846)
R0.4 max
(0.531)
0.634 (16.1)
13.50
DETAIL X 30° (R0.015 max) 0.438 X R .015 (0.38) MAX
0.846 (21.5)
(11.11) min 0.492 (12.50)
1.115 (28.32)
2 63 (Ra 1.6) 30°
1.181 (30)
Ra1.6
(ø0.197 max)
ø5.0 max 63 (Ra 1.6)
1
30° ø0.250 (6.35) max
ø11.51 Pilot Drill 63 (Ra 1.6)
Ra1.6
(.104 ±.007)
2.65 ±0.18
0.1 (0.004) A
h 0.004 (0.10) A
63
(Ra1.6
)
DETAIL X
(4 : 1) 0.104 ±.007 (2.65 ±0.18)
45°
)
08
-0 2
4 -0.
.0
00 .1
45°
0. R0
DETAIL X (4 : 1)
0.008 (0.20)
R
0.004 (0.10)
(R
13.50 (0.531)
16.10 (0.634)
R0.4 max
23.50 (0.925)
X
32.51 min (1.280 min)
30°
26.11 (1.028)
(R0.015 max)
31.50 (1.240)
3
Ra
1.6
30°
Ra
2
1.6
(ø0.197 Max)
2X ø5.0 Max
Ra1.6
1
ø10.72Pilot Drill
(ø0.422 Pilot Drill)
A
(0.104 ±0.007)
ø11.96 - 12.00
2.65 ±0.18
Ra1.6
(ø0.4710 - 0.4725)
0.1 (.004) A
45°
0 8)
.0
4 2
00 0.
-0
0. -
DETAIL X
(R 0.1
R
±1°
15°
16.50 (0.650)
1 (0.039)
14.27 (0.562)
Ra1.6
63
Ra1.6
63
X
0.05 (0.002) A
28 °
31.20 (1.228)
Ra1.6
30
63
°
3
38.30 (1.508)
48.00 (1.890)
47.60 (1.874)
49.5 (1.949) MIN
2
28 °
30
°
Ra1.6
63
1
PILOT DRILL
ø 16.51 (0.650) MAX
Ra1.6
63
17.525 (0.690)
ø
17.475 (0.688)
0.025 (0.001) A A
Ra1.6
63
45°
2.92 (0.115)
2.54 (0.100)
.0 8)
(0 .00
)
04
10 (0
DETAIL X
0. .20
SCALE 4 : 1
R 0
0.025 (0.001) A
17.50 (0.689)
±1°
1 (0.039)
1-5/16"-12 UN-2B
15°
MIN
0.05 (0.002) A
Ra1.6
63
30°
28°
Ra1.6
X 63
0.05 (0.002) A
16.67 (0.656)
3
37.25 (1.467)
Ra1.6
56 ±0.40 (2.205±0.016)
63
44.75 (1.762)
19.70 (0.776)
ø 6.35 (0.250)
57.5 (2.264) MIN
30° 2 MAX
28°
Ra1.6
63
ø 15.88 (0.625)
MAX
25.475 (1.003)
ø
25.425 (1.001)
Ra1.6
0.025 (0.001) A
63
45
3.68 (0.145)
3.30 (0.130)
)
08
.0 4)
(0 .00 DETAIL X
. 20 0 (0 SCALE 3 : 1
0 .1
0
0.025 (0.001) A
12°
ø12.75 (ø0.502)
0.025 (0.001) A
Ra1.6
13.50 (0.531)
16.10 (0.634)
R 0.4 max
X (R0.015 max)
23.50 (0.925)
26.11 (1.028)
36.20 (1.425)
33.50 (1.319)
30°
43.0 min (1.693 min)
Ra1.6
42.01 (1.654)
30°
3
Ra1.6
30° 2
Ra1.6
( Ø 0.197 max)
3XØ 5.0 max
1
ø9.53 Pilot Drill
(ø0.375 Pilot Drill)
Ra1.6
Ra1.6
0.025 (0.001) A
Ra1.6
0.1 (0.004) A
ø11.20 - 11.24 (ø0.4410 - 0.4425)
0.025 (0.001) A
Ra1.6
A
ø11.96 - 12.00 (ø0.4710 - 0.4425)
)
45°
08
- 0 .2
4 -0
.0
00 1
0. R0.
DETAIL X
(R
5-way Cavities
Size M45: FCM45-5
ø59.69 Valve Area
(ø2.35 Valve Area)
ø50.292 (ø1.98)
0.025 (0.001) A
22.00 min (0.866 min)
ø47.400 ±0.100
(ø1.866 ±0.004) 0.127 (0.005) A
M45 x 2.0 - 6H
0.100 (0.004) A
A +0.051
ø40.00 -0.000
+0.002
15° (ø1.575 -0.000 )
0.050 (0.002) A
41.00 (1.614)
(1.22)
X
31.00
60.96 (2.40)
71.00 (2.795)
30° 5
90.93 (3.58)
Ra
R0.127 Max
143.08±0.40 (5.633±.016)
1.6
101.00 (3.976)
144.00 min (5.67 min)
(R0.005 Max)
120.90 (4.76)
Ra1.6
131.50 (5.177)
4
Ra
30°
1
.6
Ra1.6
30°
3
Ra
1
.6
30°
Ra1.6 2
Ra
1.6
4X ø19.50 Max
(ø 0.767 Max)
ø33.00 Pilot Drill
1
(ø1.299 Pilot Drill)
1.00 (0.04)
+0.051
ø34 -0.000
Ra1.6
0.025 (0.001) A
3.30 (0.13)
+0.002
(ø1.339 -0.000 )
+0.051
ø36 -0.000
+0.002 0.025 (0.001) A
(ø1.417 -0.000 )
+0.051
ø38.00 -0.000
- 0 25
0.025 (0.001) A
10
+0.002
(ø1.496 -0.000 )
4 0.
.0
00 -
45°
0. .1
(R R0
DETAIL X
SCALE 3 : 1
45°
9/16-18 UNF-2B
R 0.004-0.008 r .001 (.025) A
(0.10 - 0.20)
ø0.502 (12.75)
r .001 (.025) A
Ra1.6
0.039 (1)
12°
63
(Ra1.6) 0.492 (12.50)
0.634 (16.10)
Scarf Cut Ring R 0.015 (0.38)
0.846 (21.50)
1.775 (45.09) min Ream Depth
0.986 (25.04)
63 max
Part No. 02600583
1.115 (28.32)
(Ra1.6)
(material PTFE) 2
°
30
1.805 (45.85)
63
(Ra1.6)
63 30° 1
(Ra1.6)
ø2.54 (0.10)
ø 0.377 (9.58) R(0.30)
ø0.250 (6.35)
0.012 ø0.406 (10.31)
0.376 (9.55) max
r .001 (.025) A ø0.453 (11.51)
max (2x)
63
ø9.49 (Ra1.6) R 0.004 to 0.008
25.40 (1.00) (0.10 to 0.20)
(ø0.374)
R0.30 MAX (0.012)
ø0.219 (5.56) max
ø0.340 (8.64) min MACHINE TOOLS:
Pilot Drill Flat Bottom ROUGHER: 02585083
FINISHER: 02585084
63
Ra1.6
(0.492)
25.04 (0.986)
12.49
28.32 (1.115)
(material PTFE)
61.71 (2.429)
4xø6.35 max
(ø0.250 max)
36.53 (1.438)
ø9.49
(ø0.374)
02610068
20.60 (0.811)
19.05 (0.750)
11.43 (0.450)
1.00 (0.039)
14.50 (0.571)
02610069
Note: Sealed models have a central O-ring. B Ra 1.6
63
0.1 (0.004) A
32.50 (1.280)
(2.441)
61.00 (2.402)
MIN REAM DEPTH
PTFE Ring Part No. 02600006
62.00
THOROUGHLY DEBURR
0.125”
(3.175) 0.1 (0.004) A
R 0.30 (0.012) MAX
Ra 1.6
63
ø 11.70 (0.461) MIN
PILOT DRILL FLAT BOTTOM
2.92 (0.115)
2.54 (0.100)
R 0.4 (0.016)
ø 0.50” 1.378” MAX
Ra1.6
63
(12.7) (35) 12.75 (0.502)
ø
12.70 (0.500)
R 0.20 A
0.1 (0.0
45°
0 (0 08)
.00
4)
DETAIL B MACHINE TOOLS:
ROUGHER: 02581744
FINISHER: 02581745
(0.571)
CAVITY FC08-SP PER
02610070 HYDAC DWG No. 02581743
EXCEPT REAM DEPTH AS SHOWN
With Viton Seals
14.50
®
02610071
With PTFE Ring (standard)
02610072
32.50 (1.280)
Note: Sealed models have a central O-ring.
REAM DEPTH
67 (2.638)
(3.350)
PTFE Ring Part No. 02600006 THOROUGHLY
SPOTFACE to SPOTFACE
68 (2.677)
99.60 (3.921)
DEBURR
85.10
ø 0.125”
(3.18)
ø 0.50” 2.02”
(12.7) (51.31)
12.75 (0.502)
ø
Sealed pistons should not be 12.70 (0.500)
ø18.30 (0.720)
24 (0.945)
25.3 (0.996)
15.01 (0.591)
0.50 (0.020)
With PTFE Ring (standard) 30° ±1°
02610075 Ra1.6
63
Note: Sealed models have a central O-ring. B 0.1 (0.004) A
60°
37.60 (1.480)
Ra1.6
63
0.18” Ra1.6
(4.57) R 0.4 (.016) MAX 63
ø 9.53 (0.375) MAX
R 0.20
0.1 (0.0
0 0.1 (0.004) A
(0.0 08)
04) ø 15 (0.591) MIN
PILOT DRILL FLAT BTM
ø 0.62” 1.55” A
15.93 (0.627)
(15.85) (39.27) ø
15.88 (0.625)
45°
(0.115)
(0.100)
DETAIL B
MACHINE TOOLS:
2.92
2.54
SCALE 2 : 1
ROUGHER: 02581762
FINISHER: 02581770
(0.720)
(1.480)
02610064 CAVITY FC10-SP PER
HYDAC DWG No. 02581775 A
EXCEPT REAM DEPTH AS SHOWN
With Viton® Seals
18.30
37.60
02610065
With PTFE Ring (standard)
02610066
Note: Sealed models have a central O-ring.
MAX (2X)
75.50 ±4.50 (2.972 ±0.177)
REAM DEPTH
(0.375)
(2.980)
113.30 ±0.20 (4.461 ±0.008)
95 (3.740)
SPOTFACE to SPOTFACE
THOROUGHLY
ø 9.53
75.70
ø 0.18”
(4.57)
ø 0.62” 2.27”
(15.85) (57.56)
MAX (2X)
ø 15.08 THRU
SPOTFACE = 0.5 (0.02) x
11.13
15.92 (0.627)
ø
15.88 (0.625)
0.30 (0.012) A
3 1 33 11 33 11 3 1 SYMBOLS
N = Buna-N
4-Way 3 1 3 1 3 1 V = Viton®
0 2 4
0 2 4 0 2 4
0 2 4
3 1
3 1 3 1
2-Way Cavity Part Number Model Code 3-Way Cavity Part Number Model Code
3 1 02610219 FP062-0-N 02610220 FP063-0-N
02610241 FP062-0-V 02610248 FP063-0-V
03012753 FP082-0-N 03012754 FP083-0-N
03012707 FP082-0-V 03012734 FP083-0-V
2 3 2 4 3 4
03014157 FP102-0-N 03022548 FP083-2-N
30314161 FP102-0-V 03022549 FP083-2-V
1 03064028 2 FP122-0-N 1 3 2 03014158 3 FP103-0-N
03064017 FP122-0-V 03014173 FP103-0-V
03056431 FP162-0-N 31584884 FP103-2-N
2 2
03056432
1 FP162-0-V 1 02610315 FP103-2-V
03082862 FP123-0-N
1 1
03081863 FP123-0-V
02610316 FP123-2-N
02610317 FP123-2-V
03056433 FP163-0-N
03056434 FP163-0-V
02610318 FP163-2-N
02610319 FP163-2-V
Rougher
Finisher
Part No. Shank ø Shank ø
Cavity Part No.
High Speed inch inch
Carbide
Steel (HSS)
TEMPERATURE : Oil Operating Temp. Range: __________________ Ambient Temp. Range: ________________
Valves
Model Code Qty. Position
______________________________ __________ _____________
______________________________ __________ _____________
______________________________ __________ _____________
______________________________ __________ _____________ #1 (top)
#5 (side)
______________________________ __________ _____________
______________________________ __________ _____________
______________________________ __________ _____________ #4 (back)
______________________________ __________ _____________
______________________________ __________ _____________
______________________________ __________ _____________ #3 (front)
______________________________ __________ _____________
Ports #2 (bottom)
Size / Type Qty. Labels Position #6 (side)
________________ ______ _____________ _______________
________________ ______ _____________ _______________
________________ ______ _____________ _______________
________________ ______ _____________ _______________
________________ ______ _____________ _______________
________________ ______ _____________ _______________
________________ ______ _____________ _______________
HYDRAULIC CIRCUIT
Mexico www.HYDACmex.com
HYDAC INTERNATIONAL SA DE CV
Av. Industria No. 102 Nave V
Los Reyes Ixtacala Tlalnepantla De Baz
Edo. de Mexico, Mexico 54090
+52.5.55565.8511