1. The document provides welding parameters for a welding process including filler metal diameter, current type and polarity, voltage range, travel speed, and resulting heat input.
2. The thickness range covered is from 3.7 mm to 8 mm for test coupons in a tube with a wall thickness of 5.1 mm.
3. The overall thickness range mentioned is 1.5 mm to 10.2 mm.
Original Description:
some notes when preparing WPS (welding procedure specification) carbon steel SA210 grade C
1. The document provides welding parameters for a welding process including filler metal diameter, current type and polarity, voltage range, travel speed, and resulting heat input.
2. The thickness range covered is from 3.7 mm to 8 mm for test coupons in a tube with a wall thickness of 5.1 mm.
3. The overall thickness range mentioned is 1.5 mm to 10.2 mm.
1. The document provides welding parameters for a welding process including filler metal diameter, current type and polarity, voltage range, travel speed, and resulting heat input.
2. The thickness range covered is from 3.7 mm to 8 mm for test coupons in a tube with a wall thickness of 5.1 mm.
3. The overall thickness range mentioned is 1.5 mm to 10.2 mm.
ma ka te ba l te s t coupon di a mbi l tube denga n te ba l 5.1 mm s ehi ngga ra nge thi cknes s 1.5 s d 10.2 mm F number
A number
fl ow a rgon 5 s d 15 ft3/h 2.4 s d 7 l t/mi n
HI=A*V*60/S
P rocess F iller M etal C urrent Trav el
A mps V olts H eat Input Weld P ass(es) C lassificatio Diameter Ty pe and (Range) (Range) speed (kJ/mm) A V S HI n (mm) P olarity (mm/min) mi n ma ks mi n ma ks mi n ma ks mi n ma ks Root G TA W E R80S -B3L 2.4 DC S P 90 - 130 10 - 16 45 - 70 0.77 - 2.77 90 130 10 16 45 70 771.428571 2773.333 H ot G TA W E R80S -B3L 2.4 DC S P 100 - 130 10 - 16 45 - 70 0.86 - 2.77 100 130 10 16 45 70 857.142857 2773.333 F ill G TA W E R80S -B3L 3.2 DC S P 100 - 135 10 - 16 45 - 70 0.86 - 2.88 100 135 10 16 45 70 857.142857 2880 C ap G TA W E R80S -B3L 2.4 DC S P 90 - 130 10 - 16 45 - 70 0.77 - 2.80 90 130 10 16 45 70 771.428571 2773.333