Professional Documents
Culture Documents
Feature Deployment and Testing Guide
Feature Deployment and Testing Guide
Feature Deployment and Testing Guide
Multi-band Support
Feature ID: ZWF21-00-023
Version: V3.11.10
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26771900
Fax: +86-755-26770801
URL: http://ensupport.zte.com.cn
E-mail: support@zte.com.cn
LEGAL INFORMATION
Copyright © 2012 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or
distribution of this document or any portion of this document, in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by
contractual confidentiality obligations.
All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE
CORPORATION or of their respective owners.
This document is provided “as is”, and all express, implied, or statutory warranties, representations or conditions
are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose,
title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the
use of or reliance on the information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications
covering the subject matter of this document. Except as expressly provided in any written license between ZTE
CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter
herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.
Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information.
The ultimate right to interpret this product resides in ZTE CORPORATION.
Revision History
1. The system architecture is designed based on the multi-band requirement, where the
RF module is replaced according to the corresponding bands.
2. For different bands, the RF module is configured by changing Transceiver Unit,
Duplexer Unit and PA unit corresponding to these bands. These units are also
designed on the same platform, in the same architecture on based the multi-band
requirement.
3. Based on the existing software platform, related software can realize base station
function at multiple frequency band by changing its frequency configuration.
3GPP defines 10 frequency bands in the UMTS system. For details, see the following
table.
The multi-band series of base station is an important part of ZTE series of base station.
Besides band I(2100 MHz), band II(1900 MHz), band III(1800 MHz), band IV(AWS), band
V(850 MHz), band VIII(900 MHz) are supported also. In addition, customized band shall
be supported to satisfy customer requirements.
1-1
1-2
Hardware Requirement
NE Requirement
RNC √
Software Requirement
GGSN NO
HLR NO
Topology
Topology is shown in Figure 2-1.
2-1
2-2
MSC/MGW - ZTE
None
HLR - ZTE
None
RNC
Parameters setting in RNC
RNC needs to configure several celss with different bands. These cells belong to the same
NodeB. This test guide just takes Band I and Band VIII for example. Configure cell 1 as a
Band I cell with DUARFCN of 3050, cell 2 as a Band VIII cell with DUARFCN of 10562.
Path: View > Configuration Management > RNC Managed Element > RNC Radio
Resource Management > UTRAN Cell > UTRAN Cell xxx > Cell Setup Parameters
> Frequency Band Indicator
NodeB
RRU1(type: R8860 GU906 ) needs to configure a U900M cell while RRU2(type: R8840)
needs to configure a U2.1G cell.
3-1
3-2
4-1
3. Other basic services are normal in cell 1 and cell 2. Multi-band support function is
normal.
4-2
5-1