Professional Documents
Culture Documents
Track Wheel
Track Wheel
Track width is the distance between the right and left wheel centerlines which is
illustrated . This dimension is important for cornering since it resists the
overturning moment due to the inertia force at the center of gravity (CG) and the Commented [1]: Qué es overtuning moment?
lateral force at the tires . For the designer, track width is important since it is one Commented [2]: Más información de lateral forces
component that affects the amount of lateral weight transfer . Also, the Commented [3]: Como funciona el weight transfer
designers must know the track width before kinematic analysis of the
suspension geometry can begin.
Wheelbase
characteristics, the wheelbase relative to the CG location does not have a large
effect on the kinematics of the suspension system. However, the wheelbase
should be determined early in the design process since the wheelbase has a
large influence on the packaging of components Commented [5]: Importante
Dimensiones del equipo UMSAE de sus prototipos PBR16. PBR15, PBR13
En esta parte propongo checar las medidas de los primeros lugares y sacar el
rango en el que se encuentra su Wheel base & Track Width para obtener un
rango en el cual nos sirva como referencia :D
https://mme.fiu.edu/wp-content/uploads/2014/11/2014Fall-BS-Thesis-T09-
FSAE-Chassis-Suspension.pdf
Dialnet-ModeloDeDinamicaLateralDeVehiculoMedianteBondGraph-
5010382.pdf