Professional Documents
Culture Documents
Business Areas
Business Areas
Infraestructures and
Oil & Gas Power
industries
Refining and Upstream & Natural Fossil Fuel Power Environmental
Petrochemicals Gas Plants Engineering
Refining Oil & Gas Fields Nuclear Plants Water
Petrochemicals Development Solar Power Plants Airports and Air
Proprietary Know- (Onshore/Offshore) Treatment and/or Transport
Gas Treatment & Recovery of Architecture, Buildings
how Fractionation Plants Biomass and Waste and Urbanism
Refining Basic NG, Liquefaction, Roads and Railways
Engineering Regasification & Ports and Coasts
Heat Transfer Storage Proprietary Know-how
Oil and Gas Pipelines Fertilizers and Nitric
and Compressor Acid (ESPINDESA)
Stations Hydrometallurgy and
Electrochemistry
Site map
Return
Start of content
Refining
Start of main content
Since TR began its operations, it has designed and constructed approximately 80% of Spanish refining capacity, and in
total has built approximately 300 refinery units throughout the world. TR experience in oil processing ranges from
constructing complete refineries to modernizations and expansions of existing refining facilities, for both international
The types of units designed and constructed include both basic refining units and conversion and octane enhancement
units.
After 46 years of experience in the refining sector, TR has accumulated know-how sufficient not only to develop and
optimize technologies of other licensors and customers, but also to develop complete and specific designs of its own for
a large number of refining units. TR has one of the best refining process departments in the world, with around 200
professionals.
TR is today one of the leading engineering and construction companies in this sector in the world, by number of
From the very first refinery built for MARATHON OIL in 1963 (today operated by REPSOL-YPF) all along to the projects
underway in Egypt and Turkey, the TR group has taken part in the design and construction of the following units:
Basic Refining
Crude oil distillation.
Saturated gas concentration.
Amine treatment.
Sulphur recovery.
Gasoline treatment.
LPG treatment.
Hydrotreating and fractionating of naphtha.
Kerosene treatment.
Desulfurizers.
Gas oil hydrotreatment.
Catalytic reforming.
Catalytic paraffin removal.
Acid water treatment.
Naphtha desisopentanizer.
Likewise, the TR group has wide experience in the design and construction of auxiliary services and offsites for
refineries: effluent treatment plants, fire protection systems, boilers, storage yards, electric substations, flare systems,
etc.
The large "know-how" acquired, together with the solid and experienced TR's process engineering department allows,
not only to develop and optimize the technologies of other licensers and clients, but also executing entirely proprietary
TR has gained extensive experience in petrochemicals, chemicals and fertilizers through the design and construction of
approximately 100 processing units and plants throughout the world. TR has constructed processing units that produce
monomers and various kinds of polymers and plastics, and chemical plants and units that produce fertilizers such as
diammonium phosphate (DAP), monoammonium phosphate (MAP), nitrogen-phosphate-potassium (NPK) and nitric
In the case of chemical plants, TR has its own technology, which has been and continues to be used successfully in
industrial processes. TR's experience in this area also includes know-how regarding a broad range of technologies used
in the production of olefins, aromatics, raw materials for detergents and others.
Olefins
Including the production plants for the corresponding monomers (light olefins) and their derivatives:
Ethylene.
Glycol.
High density polyethylene.
Ethers.
Low density polyethylene.
Isopropylic alcohol.
Polypropylene.
Vinyl chloride monomer.
Propylene oxide.
Polyvinyl chloride.
Butadiene extraction.
Dichloroethylene.
Ethylene oxide.
Acrylic fibers.
Etanolamines.
Vinyl acetate.
Aromatics
Units designed to produce aromatic hydrocarbons such as benzene, toluene and xylene:
Aromatic extraction.
Terephtalate dimethyl.
Ethylbenzene.
Cumene-Phenol-Acetone.
Monomer styrene and polystyrene.
Hydrodealkylation.
Ciclohexane.
Caprolactam.
Ciclohexanone.
Polycarbonates.
Herewith indicated are the process units for a petrochemical complex dedicated to the production of Linear
Alkylbenzene and Fatty Alcohols, which finally are used in the production of detergents:
Dehydrogenation.
Alkylation.
N-paraffin/N-olefin separation.
Gasification of Vacuum Residue.
.Elimination of Acid Gas.
Hydroformilation.
Hydrogene Recovery.
TR has designed and constructed the auxiliary services and offsites necessary to complete all the referred process
units.
Refining Basic Engineering
Start of main content
TR Group has a long list of references covering Feasibility Studies, Basic Engineering and Process Units Validations in
FEED projects either with own technology or technologies from Clients or Licensors. These activities are supported by
the experience obtained from more than 50 years of Project execution in Refining, Chemistry and Energy areas.
The Chemical Engineering Department is the section of the Process, Licenses and Technology Unit that performs these
activities. This Department also prepares the Process Calculation and Design Guides, develops and maintains the in-
In the Natural Gas area, TR has experience in Storage, Vaporization and Transportation.
Heat Transfer
Start of main content
The Heat Transfer Division is one of the leading Heat Transfer solution providers since 1965, with services including the
design, supply and construction of heat transfer equipment for oil refineries, petrochemical plants, thermal solar units,
The equipment is designed to be highly efficient and supplied in compliance with the increasingly strict quality control
and environmental requirements, tailored to each customer’s specific needs and process. TR has the capacity for both
Specialising in high efficiency, modular designs leading to significantly reduced erection periods and costs. TR has, for
over 40 years, designed, manufactured and built process fired heaters, reformer heaters and air preheat systems for
Designs include Cabin heaters, Double radiation heaters and Vertical cylindrical heaters, amongst others, using either
single or multiple combustion chambers depending on duty and process requirements. Incorporating low NOx burner
technology as well as preheating systems TR achieves high efficiency while meeting strict quality and environmental
TR has widespread experience in the design and supply of Heat Recovery Steam Generators, HRSG and Boilers.
The constant need to minimize fuel consumption in all types of plants is a key factor in our continuing development and
TR can apply its technology to new equipment in the initial design stage or for the revamping of existing heaters and
steam boilers with the execution of heat recovery installations, such as combustion air preheating both direct and
indirect systems or added steam production, the solution selected is designed to meet the plant conditions and
requirements.
TR provides proven designs for Shell & Tube, Double- Pipe, Multi-Tube and Air Cooled heat exchangers for High
Pressure, severe and special services in power generation, refinery petrochemical and process industries.
TR as a member of HTRI (Heat Transfer Research Institute) since 1972 uses a combination of HTRI validated
commercial Heat Transfer software as well proprietary design programs developed with the experience of over 3,500
successful installations.
Nuclear Equipment
TR is active in the design & supply of heat transfer equipment for nuclear power plants in both the international and
TR nuclear experience stretches over 40 years and includes the supply of HT equipment to all nuclear power plants in
Spain. Equipment designs include surface condensers and cooling water system exchangers for Primary. Secondary
TR quality system has been audited to international nuclear standards including ASME Section III Division I NCA-4000
ED.2007, IAEA GS-R-3(2006) and TR holds HAF 604 Certificate for the Design of Civil Nuclear Safety Equipment for
Recent projects include designs for, Jules Horowitz experimental reactor (France) and Taishan NPP units 1 & 2 (China).
Solar Steam Generators
TR continues at the forefront of thermal solar technology with its solar receiver designs for solar power towers. .
Continuously building on its unique experience in the field of high temperature solar energy dating back to the
TR supplies complete designs for Steam Generator Packages for parabolic trough and hybrid solar power plants,
generating 140MWt steam for large utility companies active in renewable energy.
In this field, TR has worked in the conversion of Sulphur Recovery Units to Superclaus type implementing new reactors,
as well as carrying out turn-key project to upgrade refineries operation scheme, improving capabilities to process
crudes, maximizing middle distillates production and reducing their sulphur content.
TR maintains the compromise to render state-of-the-art packages, with their own proprietary designs and best available
technology.
TR's highly trained engineers have the capacity to take on exciting new designs and challenges in order to provide our
clients with solutions to non-standard or "First of a Kind" processes which require the ability to work "outside of the box".
Oil & Gas Fields Development (Onshore/Offshore)
Start of main content
TR's upstream division offers its clients its "know how" and experience, to perform all types of projects related to oil &
gas surface installations, from wellheads, treatment facilities, gas fractionation, up to storage and shipping systems.
The vast experience acquired throughout the years in this activity, makes of TR a strategic asset, ensuring the client
with a final product built for its purpose, in quality, schedule and cost. The proven experience through its references,
gives TR the expertise to provide services in this field ranging from feasibility studies, basic engineering designs, up to
turn key projects including operation & maintenance. TR has available the latest design and management tools required
Over the last years TR has intensified its presence in the Persian Gulf and Latin America; Geographical areas that do
not only offer a great growth potential but also a promising future investment since development and renovation is under
demand.
In 2007 TR reached an important milestone by entering the Middle East market after being awarded the complete
Uitilites, Offsite and Interconnection package by the client Borouge, for the Borouge 2 Petrochemical Complex in Abu
Dhabi. This led to TR opening a branch office in Abu Dhabi, which currently assists TR's new contract awards for the
Shah Gas Field Development Project (for ADNOC) and Sahil and Shah Oil Field Development Project (for ADCO).
TR also continues expanding its activities in South America. In 2010 TR was awarded the CPF for Margarita Gas
Development Project in Bolivia (YPF Bolivia S.A., Repsol, BG, Pan American Energy) for the construction of a Gas
Processing Module, Central Processing Facilities (CPF) of 6.0MM m3/d and pre-investment, which will enable the
TR participated as an EPC contractor in consortium with JGC for the Ourhoud Oil Field Development project, located
south of Anadarko’s field in Hassi Berkine. The field came on stream in December 2002 and has reached an aggregate
complex facilities in remote areas including onshore production, gas treatment and processing plants, pumping and
TR has contributed in the construction of the world's largest gas fractionation facility for Saudi Aramco in Saudi Arabia;
Hawiyah Gas Plant Expansion Project and Ju'aymah Gas Fractionation Plant Expansion. The Hawiyah Gas Plant was
the first Saudi Aramco Plant to process non-associated gas (gas produced directly from gas reservois and not a
has a depentanizer column and associated storage, vessels, pumps, metering and controls necessary for transfer of a
TR's expertise in NG projects includes Liquefaction, Regasification, Tanks and associated facilities. From the safety
point of view, these projects are particularly critical in all its phases. TR enjoys an excellent track record in safety; all the
facilities designed and built by TR entered into operation and actually are operating without any safety event.
As a world-scale Contractor, TR provides comprehensive services within the natural gas field, ranging from consultancy
jobs to turn-key contracting, including basic and detailed engineering, procurement, supply and transportation of
NG projects contracting are one of the main business lines for TR. Activities in this field started in 1967 and TR has
greatly contributed ever since to the development of high level natural gas infrastructure particularly in Spain, but as well
Damietta, (SEGAS) in Egypt. It was the largest single train facility at the time with the shortest schedule for a plant of
this kind. Nowadays the plant is in commercial operation and recently TRsigned a Pre FEED agreement for the tentative
second train.
In 2010 TR was awarded its first NG project in the Far East, The Guangdong Zhuhai Golden Bay NG Tank and
Terminal (CNOOC) in Zhuhai, China. The project includes the construction of 3 (three) NG tanks and NG terminal,
which will transport 9 billion cu m/year of gas to 5 cities in Guangdong (Zhuhai, Zhongshan, Jiangmen, Foshan and
Guangzhou).
TR has available the technology to give the client all the required means to design and build NG tanks, providing an
In 2010 TR was awarded the Mejillones NG Tank Regasification Terminal in Chile (GNL Mejillones S.A.), which is a
continuation of the first phase awarded to TR in 2007. TR will design and build an NG storage tank and connections to
the NG terminal with a capacity of 175,000 m3 greater than any of the existing tanks in Spain.
TR signed in 2007 the EPC contract for the 5th NG Tank in Cartagena, which was successfully completed in 2010,
which is a continuation to previously awarded phases to TR. In addition, TR has taken part in the design and
construction of 4 out of 7 Regasification Terminals in Spain: Cartagena, Huelva and Barcelona for ENAGAS (European
leading company in terms of regasification and storage capacity), and Bilbao for Bahía de Vizcaya.
TR has also performed several Basic Engineering and FEEDs for Regasification terminals such as: Gran Canaria &
Tenerife (Canary Islands) NG Regasification Terminal for GASCAN, St. John (Canada) NG Regasification Terminal for
Canaport, Bahia Cienfuegos (Cuba) NG Regasification Terminal for PDVSA, and Mejillones (Chile) NG Regasification
For more than 40 year now, TR Group provides services, executing Projects and building Installations in the field of Oil
and Gas Pipelines, Onshore and Offshore, and related facilities including:
More than 80% of the Oil and Gas pipelines of the Spanish national network have been designed by the TR Group.
Additionally, TR provides full range of Services for Oil and Gas Pipelines, Compressor/ Pumping stations, Control and
Project Management.
Health, Safety and Environmental Management.
Front End Engineering Design.
Permitting.
Detailed Engineering and Hazop Studies.
EIA and QRA Management.
Procurement, Inspection and Expediting of Materials and Equipment.
Quality Assurance and Quality Control.
Project Cost Control & Planning.
Construction Supervision.
Commissioning.
Start-Up assistance.
TR recently completed the Saih Rawl Depletion Compression Project, a contract signed in 2007 between the Petroleum
Development Oman (PDO) andTR Oman for the engineering, procurement and construction of the facilities for this
project. The project consisted of a 120MW power station, a state-of-the-art plant containing 4 electric gas-compression
trains, and the installation of a power distribution system connecting the Saih Rawl area with Qarn Alam and Saih
Nihayda.
TR also recently completed a number of projects in Algeria. In 2006 Medgaz awarded the Compressor Station and
Receiving Terminal to TR (consortium Amec Spie) located near the coastal town of Beni-Saf (Algeria). With a surface
area of 150,000 m2, the Compressor Station will raise natural gas pressure from the gigantic Hassi R'Mel fields so that
the gas can then be transported to Spain. The Receiving Terminal, situated on the coast of Almeria, will receive, filter,
regulate and measure the natural gas originating from Beni -Saf, and will subsequently deliver it to the Spanish gas grid.
TR recently completed the RKF Compression Station project, a contract signed in 2006 between the Sonatrach-Cepsa
and TR. The project, located at Rhourde El Khrouf (Algeria), consisted of an 8MW gas compression station, a state-of-
between the Sonatrach -Total - Repsol andTR. The project, located at Tin Fouyé Tabankourt Compression Station
(Algeria), consisted of a 50MW gas compression station, a state-of-the-art plant, including 2 centrifugal
TR recently completed the Navarra Compression Station Project, a contract signed in 2007 between the Sonatrach -
Total - Repsol and TR. The project, located at Navarra (Spain), consisted of a 37.2MW gas compression station, a
Power
Start of main content
Since 1986, TR has undertaken more than 45 million hours of engineering, purchasing management, construction and
startup, on projects with total installed power of more than 40,000 MW in more than 25 countries.
Through its Power division, TR provides its customers all kinds of industrial facility engineering and construction
services, ranging from feasibility studies or basic and conceptual engineering, to the complete execution of large and
Fossil Fuel Power Plants: Combined cycles, ,Coal and fuel oil plants, Integrated gasification combined cycle,
Cogeneration, Motor plants.
Nuclear Plants.
Solar Power Plants.
Treatment and/or Recovery of Biomass and Waste.
With numerous project development references in the division’s areas of activity, our customers can be certain of the
optimum use of our Know How, in-depth knowledge of technologies and turnkey project management skills, responding
to customer requirements with the best quality, price and time of execution.
TR has supplied power projects to match the energy needs of a wide range of Clients (utilities, oil refiners, gas
companies, chemical processes, automotive industries…etc). Each application has required the compliance with a
different set of requirements and specifications and, therefore, each solution has been fit to purpose. The plants design
and key equipment selection (turbine, boilers, steam generators…etc) is performed upon the highest power engineering
standards, as well as CAPEX and OPEX optimization criteria for each project .
TR is a founding partner of Empresarios Agrupados, incorporated in 1971, which has played an important role as
Architectural Engineering in the design and construction of power generation plants worldwide.
Aware of the importance of acquired commitments both on a domestic and international level in terms of CO2
emissions, as well as the responsibility of social agents in charge of the development of industrial activity, TR has
initiated several activities, in order to identify designs that allow thermal generation under conditions that are compatible
with CO2 emission mitigation scenarios, applying the broad experience of TR in gas capturing and separation
TR has participated as partner in various research programmes, such as the “CENIT CO2” project or in the Singular
Strategic Project "Advanced CO2 generation, capture and storage projects”, headed by CIEMAT. Today, TR is
developing the engineering and FEED (Front End Engineering Design) of the OXY CFB 300 plant; a project supported
(lignite, anthracite), fuel oil and diesel as well as natural gas and biomass using various technologies.
The experience in coal-based power generation plants is based on the execution of engineering, design, construction
management, plant modernization, feasibility studies and fulfilment of multiple requirements of our international
customers. Many different technologies have been used in the various projects; for example in boilers we have worked
with the specifications of technologists such as Babcock & Wilcox, Balcke-Dürr, Combustion Engineering, Foster
Wheeler, Stein and in steam turbines we have ABB, Alstom, General Electric, Mitsubishi, Siemens-Westinghouse.
In the combined cycle plant sector, since the engagement of the first projects in 1999 until today TR has managed to
position itself solidly in Spain after participating in more than fifteen combined cycle plant projects executed in Spain.
The experience in this sector has allowed TR to be a reference with international presence in Europe and Middle East,
totalling our involvement in more than 22,000 MW of installed power in combined cycle.
TR has notable experience in the design and construction of projects involving the comprehensive use of thermal
energy. Since the beginnings in the 80's, we developed our own know how within the field of cogeneration in order to
better cover demand of the industrial sector, increasingly more in favour of its own combined electricity and heat
generation. Among others, TR has executed over 50 cogeneration projects, totalling more than 900 MW of power, for
the refinery and gas industries, and other industrial sectors such as paper, chemistry, dairy, mining, iron and steel,
TR does not condition the selection of technology or the main equipment, which enables it to offer its customers an
optimal solution that fulfils the thermal and electrical requirements of each application.
Specific software used to simulate gas-water-steam cycles and gas turbine operation allows selecting the appropriate
Nuclear Experience
Start of main content
Extensive experience as Architect Engineer (including preliminary studies, project management, basic and detail
engineering, procurement management, construction management, pre-operational test management and support to
the Operator for the commissioning) for six 1000 MW nuclear units in Spain, comprising the following technologies:
PWR from Westinghouse.
BWR from General Electric.
PWR from Siemens.
Wide ranging experience from many years of providing maintenance and operation engineering and support services to
Extensive experience providing engineering services to many NPPs, with different basic designs in over 20 different
countries, covering:
Light-water Reactors of American and European design, BWR, PWR and Russian VVER.
Gas-cooled Reactors, GCR.
Heavy-water Reactors, PHWR.
Graphite-moderated Boiling-water Reactors of Russian design, RBMK.
Advanced Light-water Reactors, ABWR, SBWR, ESBWR, AP-600 and EPP, SPWR, preparation of EUR documents,
...
Pebble Bed Modular Reactor, PBMR.
Extensive experience providing during many years engineering services for the design of radwaste management
Extensive experience as EPC contractor for over 1000 industrial plants in over 50 different countries.
Proven capability in engineering, project management, procurement management, construction, test and
commissioning management.
Financial strength.
TR has provided engineering, equipment supply and/or support services to many projects and NPPs in Mexico,
Argentina, Brazil, USA, Italy, Finland, Switzerland, Turkey, former Republic of Yugoslavia, Taiwan and to all VVER and
RMBK NPPs in Czech Republic, Slovak Republic, Bulgaria, Ukraine, Lithuania and Russia.
TR has also participated in the engineering and licensing of some of the advanced reactor designs (Generation III and
III+).
Services Offered
Start of main content
TR offers a complete range of technical and management services in the fields of engineering, procurement,
construction, operation, test and commissioning, maintenance support, radwaste management and dismantling of
nuclear facilities.
TR provides to the nuclear industry consistently the following services:
Preliminary Studies.
Project Management.
Basic and Detail Engineering in all engineering disciplines: Civil-structural, Mechanical, Electrical, I&C, Piping &
Supports, Design, Nuclear Safety and Licensing, etc.
Procurement Management and Services.
Construction Management.
Pre-operational Test and Commissioning Management.
Quality Control and Quality Assurance.
Planning and Scheduling.
Cost Control.
Contract Management.
Heat Exchangers Design, Supply and Installation.
Maintenance and Operation Support Engineering and Services.
Upgrades Engineering and Implementation.
Radwaste Management.
Dismantling.
The expertise of TR in the nuclear sector drives TR to provide its clients with the best technical and management
services for NPPs, new projects or plants in operation, for radwaste management facilities and for dismantling of
nuclear facilities. Additionally TR offers its capabilities for providing services to research nuclear facilities, comprising
TR has demonstrable experience in successfully delivering to its clients Industrial Facilities and Power Plants under
TR is committed to keeping the best quality on the work performed and services provided. TR is ISO 9001 and ISO
14001 certified.
Market
TR offers its services in the nuclear market for new build Nuclear Power Plants and nuclear facilities, planned to be
constructed in different countries of the world, under subcontracts and/or through consortiums with NSSS technology
design, QA procedures and technological knowledge giving us the capacity and the experience required for the design
and supply of Heat Transfer equipment in both Nuclear and Defense sectors of industry.
TR provides thermal and mechanical design to the industry, manufacturing at approved/qualified manufacturing shops
worldwide in countries as geographically varied as Egypt, KSA, Korea, Mexico, Russia, Turkey, UK and Spain.
TR experience, developed by serving some of the most prestigious and demanding clients in the Power, Petrochemical
and Refining Industry, is supported by references in the design and supply of over 5,000 equipment units, of which over
1,000 units were supplied in the last five years alone. In particular TR has designed and/or supplied equipment to all
Nuclear Power Plants built in Spain, numbering over 160 Heat Exchangers of all types and service, where we have
recently been requested to supply some replacement units for items being decommissioned after completing 30 years
of successful operation. TR most recent and current project lists include equipment design and/or supply for Nuclear
Plants in Spain (Vandellós II NPP), Slovakia (Bohnice NPP) France (Flamanville NPP and Jules Horowitz experimental
TR Quality System has been independently audited by our Nuclear Industry clients to internationally recognised nuclear
standards including UNE73401:95, ASME III Division 1 NCA 4000 and IAEA GS-R-3 (2006).
TR holds HAF604 registration for the Design of Civil Nuclear Safety Equipment in the P.R. China and it is one of a small
and privileged group of companies which have successfully undergone the rigorous audit process for registration with
the Nuclear Safety Regulatory Department of State Council in the P.R. of China, for the Design of Nuclear Safety
Equipment. As a HAF604 Certificate holder, TR is qualified under the HAF604 regulation, for the design of critical safety
and technology systems for civil nuclear equipment within the P.R. of China. Certificate HAF604 for Imported Civil
Thus TR is uniquely positioned to provide our Chinese nuclear clients with innovative and economical critical safety
system equipment.
broad experience in the field of heat transfer in critical elements and efficient electricity generation.
TR provides services as EPC contractor for Thermal Solar projects. Our experience in power generation projects of all
kind is a success guarantee for thermal solar projects, both in Central Tower and Parabolic Through technology, where
TR broad experience with the Heat Transfer Fluid (HTF), commonly used in conventional systems in refining and
TR can also provide its own technology for the key heat transfer equipment, through its Heat Transfer division
(Tecnical). Tecnical, with more than 40 years experience and more than 3.000 heat exchangers, boilers and furnaces
successfully supplied, has its own design for both central tower solar receiver and the HTF -steam generator in
parabolic through application. HTF-molten salt heat exchangers may also be supplied for the heat storage systems.
Treatment and/or Recovery of Biomass and Waste
Start of main content
TR has broad experience in the execution of electrical and/or thermal generation projects including projects with
unconventional fuels such as Biomass (forest waste, olive trees, etc) or Solid Urban Waste.
The experience acquired in the execution of these projects enables us to apply the latest standards in efficiency and
fulfilment of the most demanding environmental criteria. These, combined with our broad experience in all kinds of
electricity generation plants using conventional fuels, enable us to define a framework of solutions with optimal
know how in biofuel, bioethanol and especially biodiesel production processes. As a result, TR has pioneered in Spain
the execution of biodiesel production plant projects, establishing a reference position with three turnkey plants installed.
TR does not condition the choice of technology and main equipment, which, together with the experience obtained with
the various technologists, allows defining the optimal solution for each project, mutually agreed with the customer
In addition to strict quality compliance of products and reliability of the solutions, projects apply different multifeed
technologies (suitable for processing different types of oil such as sunflower, rapeseed, soya, etc.).
Environmental Engineering
Start of main content
The Environmental Engineering department was the response to the growing demand to lower pollution arising as a
TR Infrastructures and Environment covers the following work types in environmental engineering area:
Water desalination.
Drinking water supply and treatment.
Urban and industrial waste water treatment.
Urban and industrial solid waste treatment.
Treatment and revalorization of special wastes.
Other activities.This division consists of a multidisciplinary team of highly qualified professionals that guarantee the
quality of the projects.
Water
Start of main content
The Water department has been developing an intense activity in the field of hydraulics and water over the last four
decades. Working from the conceptual phases as the water planning and plans evaluation to carry out several projects
and finally participating in the construction and in some cases in the operation and maintenance of projects works.
TR Infrastructures and Environment undertakes the following types of work in Water area:
This division consists of a multidisciplinary team of highly qualified professionals that guarantee the quality of the
projects.
The Airports and Air Transport department, with 30 years of experience, has developed some of the most important
infrastructure projects that AENA (Spanish airports organization) has raised in Spain during the last years. Since its
foundation in 1976, the Airports department has developed several studies, projects, control and supervision works in
TR Infrastructures and Environment undertakes the following types of work in the Airports and Air Transport area:
Air fields.
Airport planning.
Technological systems.
Airport terminals.
This division consists of a multidisciplinary team of highly qualified professionals that guarantee the quality of the
projects.
The Infrastructures and Environment division has the capacity of managing large architecture, buildings and urbanism
projects applying the same high level of quality and practices that have made TR so successful in the industrial area.
TR Infrastructures and Environment covers the following work types in the architecture, buildings and urbanism area:
Parkings.
Shopping and leisure centers.
Industrial buildings.
Offices buildings.
Housing.
Underground and railway stations.
Hospitals.
Sports facilities.
Transport interchange stations.
Airport terminals.
Urbanism and land planning.
This division consists of a multidisciplinary team of highly qualified professionals that guarantee the quality of the
projects.
TR Infrastructures and Environment covers the following work types in Roads and Railways area:
This division consists of a multidisciplinary team of highly qualified professionals that guarantee the quality of the
projects.
TR Infrastructures and Environment covers the following work types in the Ports and Coasts area:
Marine pipelines.
Environmental improvement of shorelines.
Piers.
Ports.
Yatch harbors.
This division consists of a multidisciplinary team of highly qualified professionals that guarantee the quality of the
projects.
investment to industrial research and development for processes and Technologies for fertilizers, nitric acid and
Our Work
With available Technologies has been built around 50 industrial plants in 15 different countries, with total installed cost
over 1,3bn$.
These plants has been supplied, in the majority of the cases, as turn Key Projects by TR and in the last few years
For the continuous development of Technologies, TR uses their own resources and contracts with several Institutions
such as Universities, R&D Centres and in conjunction with industrial installations owners.
Besides, TR have the experience acquired through execution of industrial plants utilizing technology developed by
others:
Ammonia.
Sulphuric acid.
Phosphoric acid.
Urea.
Dicalciumn phosphate.
Clhoride-sodium hidroxide.
Paints.
Services
ESPINDESA provides:
Our Technologies