Professional Documents
Culture Documents
Packers
Packers
Packers
Drilling & Down-hole Completion Tools
the second at 2,000 psi and the third at 3,000 psi for setting the packers because of the higher setting
differential pressure. In order to test the packers pressures.
individually, a means of temporary communication
between the tubing and the casing (i.e. a Sliding Releasing procedure:
Sleeve below each packer) will be necessary. The The Packer is equipped with 30,000 lb shear ring for
lower packer can be set and tested down the a straight up-strain release. Shear rings of
casing. The second packer can then be set, the distinctive shear values are available ranging from
sleeve below it opened, and the second packer 20,000 lb to 50,000 lb for different sizes of packers
tested down the casing. The third packer is set and [5” ~ 9-5/8].
tested the same way. It is recommended that a
blanking plug be used to temporarily plug the tubing
Specification Guide:
Casing Packer
ISOLATION PACKER
MODEL: WC-HPL-2
PRODUCT No.: WC-20102
HPL-2 Isolation Packer is a hydraulic set, single string tandem packer used in
multiple zone wells. It is used as the upper packer in multiple zone applications.
Isolation Packer run above another hydraulic retrievable packer to isolate a
zone between them for treatment, injection, or production. The field-proven
isolation packer can also isolate casing holes or perforations. The simple
design and straight tubing-pull release make the packer a cost-effective tool to
isolate zones in low-pressure applications.
Features/Benefits:
• Economical Design
• The straight-pull, shear-release pins are unaffected by differential pressure,
enabling easy changes to the release force before running.
• The compact design eases passage through doglegs and deviated wells to
help prevent sticking and improve running efficiency.
• The hydraulic setting avoids the need to rotate the work string in running or
retrieving the packer, which simplifies procedures, improves efficiency, and
saves rig time.
Application:
• Low-pressure wells.
• Stacked applications.
• Applications prohibiting tubing rotation.
• Isolation of casing holes and perforations.
Specification Guide:
Casing Packer
End Connection
SIZE Weight Min. ID Max. ID Max. OD Min. ID
Specification
inch inch inch
Lb/ft inch mm inch mm inch
mm mm mm
4 1/2 3.920 4.090 3.776 1.984
9.5-13.5 2 3/8 EU 8RD
114.3 99.57 103.89 95.91 50.39
4.408 4.560 4.266
11.5-15
5 111.96 115.82 108.36 1.984 2 3/8 EU 8RD
127.0 4.276 4.408 4.141 50.39
15-18
108.61 111.96 105.18
4.641 1.984
2 3/8 EU 8RD
4.778 5.044 117.88 50.39
13-20
5 1/2 121.36 128.12 4.630 2.400
2 7/8 EU 8RD
139.7 117.60 60.96
4.670 4.778 4.516 1.984
20-23 2 3/8 EU 8RD
118.62 121.36 114.71 50.39
7 6.276 6.538 6.110 2.484
17-26 2 7/8 EU 8RD
177.8 159.41 166.07 155.19 63.09
9 5/8 8.535 8.755 8.250 2.990
43.5-53.5 3 1/2 EU 8RD
244.4 216.78 222.37 209.55 75.94
Drilling & Down-hole Completion Tools
Application:
• For single or multiple zone isolation.
• For deviated wells where conditions are not suitable for mechanical or
wireline set packers
Specification Guide:
Casing Packer
End Connection
OD Weight Min. ID Max. ID Max. OD Min. ID
Specification
inch inch inch inch inch
Lb/ft inch
mm mm mm mm mm
5 1/2 4.778 5.012 4.500 1.93 2 7/8 EU 8RD
14-20
139.7 121.36 127.30 114.30 50.30
7 6.276 6.456 6.078 2.875
20-26 2 7/8 EU 8RD
177.8 159.41 163.98 154.38 73.02
Drilling & Down-hole Completion Tools
Features/Benefits:
• The straight-pull, shear-release pins are unaffected by differential
pressure, enabling easy changes to the release force before running.
• All components are locked to prevent pressure buildup or debris from
presetting the packer, improving reliability when running the packer
in the wellbore.
• The pressure-balance system offsets pressure differentials across
the packer, enabling the packing element to maintain an effective
seal.
• The double-grip system enables the packer to hold differential
pressures securely from above and below, preventing packing-
element movement and ensuring proper pack-off.
• The packer could be set and tested selectively in stacked packer
completions.
• No tubing manipulation required to set.
• All components locked to prevent pre-set.
• Pressure differential rating up to 10000 psi.
• Temperature rating up to 350°F.
• Ideal packer for well with higher deviations.
• In stacked packer installations, sequential release is achievable.
Applications:
• Suitable for highly deviated wells and doglegs.
• Onshore offshore completions.
• Stacked completions.
• Water injection/Gas lift.
• Coiled-tubing completions.
Specification Guide:
Casing Packer
Drilling & Down-hole Completion Tools
Drilling & Down-hole Completion Tools
Specification Guide:
Casing Packer
Drilling & Down-hole Completion Tools
Specification Guide:
SIZE Weight OD ID ID
End End
inch inch inch inch
lb/ft Connection Connection
mm mm mm mm
5-1/2 4.625 1.900 NU 1.531 1.660 NU 1.313
14-20
139.7 117.48 10RD 38.89 10RD 33.35
5.938
23-32
7 150.83
177.8 6.000 2 3/8 EU 1.938 1.938
17.29 2 3/8 EU 8RD
152.40 8RD 49.23 49.23
6.453
33.7-39
7 5/8 163.91
193.9 6.625
24-29.7
168.28 2 7/8 EU 2.406 2.406
2 7/8 EU 8RD
8 5/8 7.531 8RD 61.11 61.11
28-40
219.1 191.29
8.250
47-53
9-5/8 209.55 3 1/2 EU 3.000 3.000
3 1/2 EU 8RD
244.5 8.500 8RD 76.20 76.20
36-47
215.90
Drilling & Down-hole Completion Tools
Specification Guide:
Ball Seat ID
End Connection
Size Ball Size Before After Specification
Shifting Shifting
inch inch inch inch
inch
mm mm mm mm
1.900 1.438 1.250 1.516
1.900 EU or NU
48.26 36.51 31.75 38.51
Drilling & Down-hole Completion Tools
Drilling & Down-hole Completion Tools
SAFETY JOINT
MODEL: WC-SJ-1
PRODUCT No.: WC-20117
The safety joint provides for emergency recovery of the major portion of
the tubing string while it becomes necessary to abandon the equipment
under the string. Precision left hand square threads facilitate release of
the joint by right hand tubing rotation. Equipment requiring right hand
rotation should not be used to below the safety joint.
Specification Guide:
Standard
Max. Nominal
Size End
OD ID
Connection
inch inch inch
inch
mm mm mm
1.900 2.22 1.53
1.900 NU 10 RD
48.26 56.39 38.86
2 3/8 2.88 2.00
2 3/8 EU 8RD
60.33 73.15 50.80