Professional Documents
Culture Documents
Mitutoyo - Mikrometry Elektroniczne QuantuMike - PRE1489 - 2018 EN
Mitutoyo - Mikrometry Elektroniczne QuantuMike - PRE1489 - 2018 EN
PRE1489
SMALL TOOL INSTRUMENTS
AND DATA MANAGEMENT
2 mm feed per revolution
Mitutoyo is proud to have reached its leading position in the micrometer market through
a spirit of innovation, imagination and creating added value. The QuantuMike brand of
micrometer, inspired by this Mitutoyo Spirit, provides users with an excellent measuring
experience with higher speed, quality and stability than ever before owing to the integration of
sophisticated manufacturing and processing technologies.
1772 1937
Micrometer invented by Success in manufacturing
James Watt (UK) micrometers domestically
2
performance far beyond users’ expectations
Spindle feed
per revolution 293-143-30
MDE-100MJ
Conventional
model (MDC) 0.5mm Measuring range: 75-100mm
QuantuMike 2.0mm
293-141-30
MDE-50MJ
Measuring range: 25-50mm
293-142-30
MDE-75MJ
Measuring range: 50-75mm
293-140-30
MDE-25MJ
Measuring range: 0-25mm
3
Speedy measurement is achieved thanks to 2 mm of
spindle feed for every thimble revolution!
Speedy measurement
Faster measurement is achieved by using a finer thread which feeds the
spindle by 2mm per revolution of the thimble instead of the standard
0.5mm. This increase of spindle feed has been made possible thanks to Spindle feed
1 revolution per revolution
new high precision thread-cutting and test techniques. Trials show that a of thimble
Conventional
reduction in positioning times of 60% and measuring times of 35%* can model (MDC) 0.5mm
be obtained, compared with a conventional micrometer.
* According to Mitutoyo's comparison test data for measuring time on typical QuantuMike 2.0mm
workpieces.
40
30 41 sec.
22 sec.
20
10 sec.
10
12 sec. 12 sec.
0
Conventional model QuantuMike
4
Repeatable measurement Useful application of measured data
The patented ratchet thimble mechanism* helps ensure repeatable A statistical process control system and a measurement network system
results by transmitting microvibrations along the spindle to the contact can be established to share information regarding quality with a model
face to provide a constant measuring force and encourage good contact equipped with the data output function.
with the workpiece. The ratchet works from the thimble as well as the
speeder so it is always easy to use - even when making measurements Dust/water resistance with IP65 protection level
one-handed. The sound of the ratchet provides the user with a sense
Excellent resistance against oil, water and dust enables this product to be
of confidence and the speeder
used in machining situations that include splashing coolant fluid.
enables the rapid spindle feed
needed when measuring widely Category Level Brief description
different dimensions. Protection against solid 6: Dust-proof No ingress of dust allowed.
foreign objects
* Patent registered (in Japan, USA, China,
Germany, UK, and France) Protection against 5: Protected against water Water protected in jets against the
water jets enclosure from any direction shall
have no harmful effects.
Note: For details of the test conditions used in evaluating each degree of protection, please
refer to the original standard.
Ratchet-induced
1419032586
microvibrations along the
Ratchet on thimble Ratchet on speeder spindle help ensure repeatable
Protection codes IP65 has successfully passed the
measurements IP test carried out by a Germany accreditation
organization, TÜV Rheinland.
Function lock
±1 μm/±.00005” accuracy
(Except for 75-100 mm (3-4”) type.)
mm inch/mm
5
2mm feed per revolution
Selective specifications
Order No. Measuring range Resolution Instrumental error* Flatness of
measuring faces
Parallelism of
measuring faces Weight
293-140-30 0-25 mm 265 g
1 μm or less
293-141-30 25-50 mm ±1 μm 325 g
Data output function equipped
293-142-30 50-75 mm 465 g
2 μm or less
293-143-30 75-100 mm ±2 μm 620 g
0.001 mm
293-145-30 0-25 mm 265 g
1 μm or less
Data output function 293-146-30 25-50 mm ±1 μm 325 g
not equipped 193-147-30 50-75 mm 465 g
2 μm or less
293-148-30 75-100 mm ±2 μm 0.3 μm or less 620g
293-180-30 0-1”/0-25 mm (.000012" or less) 265 g
.00004"/1 μm or less
293-181-30 1-2”/25-50 mm ±.00005”/±1 µm 325 g
Data output function equipped
293-182-30 2-3”/50-75 mm 465 g
.00008"/2 μm or less
293-183-30 3-4”/75-100 mm .00005”/ ±.0001”/±2 µm 620 g
293-185-30 0-1”/0-25 mm 0.001 mm 265 g
.00004"/1 μm or less
Data output function 293-186-30 1-2”/25-50 mm ±.00005”/±1 µm 325 g
not equipped 293-187-30 2-3”/50-75 mm 465 g
.00008"/2 μm or less
293-188-30 3-4”/75-100 mm ±.0001”/±2 µm 620 g
* Excluding quantizing error
6
Dimensions
a L 25 2 48.5 63.6
(
Minimum
measuring
length )
10.8
ø6.3(Measuring face)
2.5
ø6.3(Measuring face)
(Spindle diameter)
ø19.3
ø6.35
b
Unit: mm
L a b
0 - 25 mm (0-1") 0 6.5 25
25 - 50 mm (1-2") 25 7.3 32.5
50 - 75 mm (2-3") 50 10.1 47
75 - 100 mm (3-4") 75 11.5 60
* Refer to the USB Input Tool Series leaflet (E12007) for more details.
*Standard accessory
7
© MITUTOYO/D 08/18 PRE1489
Coordinate Measuring Machines Vision Measuring Systems Form Measurement Optical Measuring
Whatever your challenges are,
Mitutoyo supports you from start to finish.
Note: Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only Tel. +49 (0) 2137-102-0
binding when explicitly agreed upon. MITUTOYO is either registered trademarks or trademarks of Mitutoyo Corp. in Japan and/or Fax +49 (0) 2137-102-351
other countries/regions. Excel, Microsoft, and Windows are either registered trademarks or trademarks of Microsoft Corporation
in the United States and/or other countries. Other product, company and brand names mentioned herein are for identification
info@mitutoyo.eu
purposes only and may be the trademarks of their respective holders. www.mitutoyo.eu